10NCX
Coaxials - 10.0 Inches
400 W continuous program power capacity
70° nominal coverage
60 - 18000 Hz response
94 dB sensitivity
Neodymium magnet assembly
45.8 mm (1.8”) HF unit exit diameter
XO-5 dedicated crossover network
B&C Speakers s.p.a.
Via Poggiomoro, 1 - Loc. Vallina, 50012 Bagno a Ripoli (FI) - ITALY - Tel. +39 055 65721 - Fax +39 055 6572312 - mail@[Link]
10NCX
Coaxials- 10.0 Inc hes
SPECIFICATIONS SPECIFICATIONS LF UNIT SPECIFICATIONS HF UNIT
Nominal diameter 225 mm (10.0 in) LF Sensitivity 2 94.0 dB HF Sensitivity 5 106.0 dB
Nominal impedance 8Ω LF Nominal Power Handling3 200 W HF Nominal Power Handling6 50 W
Minimum impedance lf 6.8 Ω LF Continuous Power Handling4 400 W HF Continuous Power Handling7 100 W
Minimum impedance hf 7.3 Ω LF Voice Coil Diameter 65 mm (2.5 in) HF Voice Coil Diameter 65 mm (2.5 in)
Frequency range 60 - 18000 Hz LF Winding Material Aluminium HF Winding Material Aluminium
Dispersion angle1 70 ° Diaphragm material Titanium
Magnet material Neodymium Ring Recommended crossover8 1.2 kHz
PARAMETERS MOUNTING AND SHIPPING INFO CROSSOVER
Fs 57 Hz Overall diameter 262 mm (10.3 in) Model XO-5
Re 5.6 Ω Bolt circle diameter 245 mm (9.6 in) Filter Type Two way
Qes 0.35 Baffle cutout diameter 230 mm (8.8 in) Nominal Impedance 8.0 Ω
Qms 3.7 Depth 144 mm (5.7 in) Low-pass slope 12.0 dB/oct
Qts 0.32 Flange and gasket thickness 14 mm (0.55 in) High-pass slope 12.0 dB/oct
Vas 40.0 dm 3 (1.4 ft3) Net weight 3.9 kg (8.6 lb) Overall Dimensions 117x105 mm (4.6x4.1 in)
Sd 320.0 cm 2 (49.1 in2) Shipping weight 4.6 kg (10.1 lb) Weight 0.6 kg (1.3 lb)
η₀ 2.0 % Shipping box 320x320x160 mm (12x12x6.3 in)
Xmax 3.0 mm
Xvar 6.0 mm
Mms 28 g
Bl 12.7 Txm
Le 1.2 mH
EBP 162 Hz
SERVICE KIT
Service kit lf RCK010NCX8
Replacement diaphragm MMD6108M
1. Included by –6 dB down points.
2. Applied RMS Voltage is set to 2.83V.
3. 2 hours test made with continuous pink noise signal (6 dB crest factor) within the range Fs-10Fs. Power calculated on rated minimum impedance.
Loudspeaker in free air.
4. Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
5. Applied RMS Voltage is set to 2.83V.
6. 2 hour test made with continuous pink noise signal (6 dB crest factor) within the range from the recommended crossover frequency to 20 kHz. Power
calculated on rated minimum impedance. Loudspeaker in free air.
7. Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
8. 12 dB/oct. or higher slope high-pass filter.
B&C Speakers s.p.a.
Via Poggiomoro, 1 - Loc. Vallina, 50012 Bagno a Ripoli (FI) - ITALY - Tel. +39 055 65721 - Fax +39 055 6572312 - mail@[Link]
