Project Proposed Two Bedroomed Development Rox Engineering

Client Beth Mwangi Made by Date Page

Location Column C2 REL 4-Sep-25 1
COLUMN LOAD TAKE DOWN & DESIGN FOR SYMMETRICALLY REINFORCED RECT. COLUMNS BENT ABOUT TWO AXES TO BS 8110:1997 Checked Revision Job No
Originated from [Link] v2.1 © 1999-2003 BCA for RCC JKN - 2206

INPUT 1-2
Location Column C2 y concrete density, kN/m3 24.0
yfgk 1.40
Orientation A-B x x B-C H yfqk 1.60

y
2-3

Level 7 6 5 4 3 2 1
Dimensions
Spans Cl to Cl A-B m
B-C m 5.00
1-2 m 3.80
2-3 m 3.20

Slab thickness (solid) mm 150

span direction,(II to) x, y or b b

Beams width A-B mm

depth o/a A-B mm
width B-C mm 200
depth o/a B-C mm 450
width 1-2 mm 200
depth o/a 1-2 mm 450
width 2-3 mm 200
depth o/a 2-3 mm 450

Column below (col above)

H (ll to yy) mm 200
B (ll to xx) mm 200
Height (fl. to floor.) m 2.80

Level 7 6 5 4 3 2 1 0 0 0
Loads (characteristic uno)
Slab (inc swt.) gk kN/m2 5.60
qk kN/m2 1.50

Beams (swt.) gk kN/m included included included included included included included included included included
line loads (-extra over slab loads and beam self weight)
A-B gk kN/m
qk kN/m
B-C gk kN/m 23.2
qk kN/m
1-2 gk kN/m 18.5
qk kN/m
2-3 gk kN/m 14.1
qk kN/m

At column position, other applied loads (eg loads from cantilevers)

Gk kN (char)
Qk kN (char)
Mxx kNm (ult) 0.0
Myy kNm (ult) 0.0

Loads per floor

Floor Gk kN 0.0 173.4
Floor Qk kN 0.0 13.1
Column below Gk kN 0.0 2.7

OUTPUT Column level 7 to 6 6 to 5 5 to 4 4 to 3 3 to 2 2 to 1Below 1

Cumulative loads in column.
Gk kN 0.0 176.0
Redn Qk kN 0.0 13.1
factors Qk redn factor 1.0
OK*? N Qk red* kN 0.0 13.1
N kN 267
Moments in column
about x-x Mxx top kNm
about y-y Myy top kNm
Mxx bottom kNm
Myy bottom kNm
Project Proposed Two Bedroomed Development Rox Engineering

Client Beth Mwangi Made by Date Page

Location Column C2 REL 4-Sep-25 2
COLUMN LOAD TAKE DOWN & DESIGN FOR SYMMETRICALLY REINFORCED RECT. COLUMNS BENT ABOUT
TWO AXES TO BS 8110:1997 Checked Revision Job No
Originated from [Link] v2.1 © 1999-2003 BCA for RCC JKN - 2206

INPUT Location Column C2

Level considered: Bottom (Max N) Orientation 1-2
y
Dimensions about x-x bout y-y
h (ll to yy) mm #N/A - A-B x x B-C H
b (ll to xx) mm - #N/A
lo, clear height mm #N/A #N/A y
ß value 0.90 0.90 2-3
#N/A
Column properties
Braced or Unbraced? B or U B B fcu 25
fy 460
Loads cover to link mm 30
Axial N kN 267 - Max sized main bar mm 12
Moments top kNm 0.0 0.0 Probable percentage As % 2.00%
bottom kNm 0.0 0.0 link diameter mm 6
OUTPUT
Design criteria
N kNm 267
M kN #N/A
about #N/A
PROOF
Slenderness Design moments (cont) about x-x bout y-y
le mm #N/A #N/A Design moments for unbraced columns
Slenderness #N/A #N/A M2+100% Madd kNm n/a n/a
Limit for short column 15.0 15.0 eminN kNm n/a n/a
Design column as #N/A Maximu kNm n/a n/a
Column is #N/A #N/A
about x-x bout y-y Design moments
kNm #N/A #N/A
Design moments about x-x bout y-y
Min eccentricity, 0.05 h kNm #N/A #N/A
Braced Braced
Madd #N/A
d mm #N/A #N/A
Nuz kN #N/A #N/A
Nbal kN #N/A #N/A Biaxial bending
K #N/A #N/A Mx/h' #N/A
#N/A mm #N/A #N/A My/b #N/A
ßa #N/A #N/A Critical direction #N/A
au mm #N/A #N/A
Madd kNm #N/A #N/A N/bhfcu #N/A
Eqns 32-35 ok to use? #N/A ß #N/A
Braced columns M1 kNm 0.0 0.0
Mi kNm 0.0 0.0 Maximum design moment
Mi, (Mi=0 if Le/h>20) kNm #N/A #N/A #N/A #N/A
Mi, (Mi=0 if b/h>3) #N/A #N/A #N/A #N/A
= kNm #N/A #N/A
Design moments for braced columns
M2 kNm 0.0 0.0
Mi+Madd kNm #N/A #N/A
M1+Madd/2 kNm #N/A #N/A
eminN kNm n/a #N/A
Maximu kNm #N/A #N/A
 REINFORCED CONCRETE
Project Proposed Two Bedroomed Development
COUNCIL
Client Beth Mwangi Made by Date Page
Locatio Column C2 REL 4-Sep-25 3
COLUMN LOAD TAKE DOWN & DESIGN FOR SYMMETRICALLY REINFORCED
RECT. COLUMNS BENT ABOUT TWO AXES TO BS 8110:1997 Checked Revision Job No
Originated from [Link] v2.1 © 1999-2003 BCA for RCC JKN - 2206

INPUT Level designed: Bottom (Max N)

Axial load, N 267 kN fcu 25 N/mm²
Moment, M #N/A kNm fy 460 N/mm²
about #N/A axis fyv 460 N/mm²
Height, h (ll to yy, L'r to xx) 200 mm gm 1.05 steel
Breadth, b (ll to xx) 200 mm gm 1.5 concrete
Max bar diameter 12 mm Link Ø 6 mm
cover (to link) 30 mm
CALCULATIONS
from M As = {M - [Link](h/2 - dc/2)}/[(h/2-d').(fsc+fst).gm]
from N As = (N - [Link]/gm) / (fsc - fst) As = Ast = Asc: dc=min(h,0.9x)
d' = 42 mm .67fcu/gm = 11.2 N/mm²
d= #N/A mm fy/gm = 438.1 N/mm²
#N/A #N/A mm
b= #N/A mm

from iteration, neutral axis depth, x, = #N/A mm

dc #N/A mm
[Link]/gm #N/A kN
Steel comp strain #N/A
Steel tens strain #N/A
Steel stress in comp. face, fsc #N/A N/mm2 (Comp. stress in reinf.)
Steel stress in tensile face, fst #N/A N/mm2 (Tensile stress in reinf.)
from M, As = #N/A mm2
from N, As = #N/A mm2 #N/A
#N/A
#N/A #N/A
#N/A
Links : - #N/A
#N/A #N/A
OK
Strain diagram Stress diagram
92 92 9 11.2 N/mm²

###

50 50 50 7

Notes
Stresses in N/mm2
Compression +ve
 Project Proposed Two Bedroomed Development
Location
Column C2 LOAD TAKE DOWN CALCULATIONS I Made by REL Job No 2206
COLUMN LOAD TAKE DOWN & DESIGN FOR SYMMETRICALLY REINFORCED RECT. COLUMNS BENT ABOUT TWO AXES TO BS 8110:1997 4-Sep-25
Originated from [Link] v2.1 © 1999-2003 BCA for RCC

Location Column C2 Column loads - loads from slabs (including self weight) Location Column C2
Column loads - loads from slabs (including self weight)
7 6 5 4 3 2 1 0 0 0
A-B Gk kN =0.5x(0.0+0.0)/ =0.5x(0.0+0.0)/ =0.5x(0.0+0.0)/ =0.5x(0.0+0.0)/ =0.5x(0.0+0.0)/ =0.5x(0.0+0.0)/ =0.5x(3.8+3.2)/ =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
Qk kN 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*5.6
=0.5x(3.8+3.2)/ =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
B-C Gk kN 2*0.0/2*0.0
= 2*0.0/2*0.0
= 2*0.0/2*0.0
= 2*0.0/2*0.0
= 2*0.0/2*0.0
= 2*0.0/2*0.0
= 2*0.0/2*1.5
= = 0.5x(0.0+0.0)/2*0.0/2*0.0 = 0.5x(0.0+0.0)/2*0.0/2*0.0 = 0.5x(0.0+0.0)/2*0.0/2*0.0
Qk kN 0.5x(0.0+0.0)/2*0.0/2*0.0
=0.5x(0.0+0.0)/ 0.5x(0.0+0.0)/2*0.0/2*0.0
=0.5x(0.0+0.0)/ 0.5x(0.0+0.0)/2*0.0/2*0.0
=0.5x(0.0+0.0)/ 0.5x(0.0+0.0)/2*0.0/2*0.0
=0.5x(0.0+0.0)/ 0.5x(0.0+0.0)/2*0.0/2*0.0
=0.5x(0.0+0.0)/ 0.5x(0.0+0.0)/2*0.0/2*0.0
=0.5x(0.0+0.0)/ 0.5x(3.8+3.2)/2*5.0/2*5.6
=0.5x(3.8+3.2)/ =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
1-2 Gk kN 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*5.0/2*1.5
=0.5x(0.0+5.0)/ =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
Qk kN 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*3.8/2*5.6
=0.5x(0.0+5.0)/ =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
2-3 Gk kN 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*3.8/2*1.5
=0.5x(0.0+5.0)/ =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
Qk kN 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*0.0/2*0.0
=0.5x(0.0+0.0)/ 2*3.2/2*5.6
=0.5x(0.0+5.0)/ =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0 =0.5x(0.0+0.0)/2*0.0/2*0.0
ie
A-B Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
B-C Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 24.5 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 6.6 0.0 0.0 0.0
1-2 Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 13.3 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 3.6 0.0 0.0 0.0
2-3 Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 11.2 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 3.0 0.0 0.0 0.0

Column loads - loads from beam line loads Column loads - loads from
beam line loads
7 6 5 4 3 2 1 0 0 0
A-B Gk kN = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
Qk kN = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
B-C Gk kN = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 5.0/2*23.2 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
Qk kN = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 5.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
1-2 Gk kN = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 3.8/2*18.5 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
Qk kN = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 3.8/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
2-3 Gk kN = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 3.2/2*14.1 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
Qk kN = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 3.2/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0 = 0.0/2*0.0
ie
A-B Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
B-C Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 58.0 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
1-2 Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 35.2 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
2-3 Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 22.6 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

Column loads - beams

self weight
Column loads - beams self weigh 7 6 5 4 3 2 1 0 0 0
A-B gk kN/m
Gk kN = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2
B-C gk kN/m
Gk kN = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2
1-2 gk kN/m 200*300*24.0/10^6*5.0/2
Gk kN = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2
2-3 gk kN 200*300*24.0/10^6*3.8/2
Gk kN/m = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2 = 0*0*24.0/10^6*0.0/2
200*300*24.0/10^6*3.2/2

ie
A-B gk kN/m 0 0 0 0 0 0 0 0 0 0
Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
B-C gk kN/m 0 0 0 0 0 0 1.44 0 0 0
Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 3.6 0.0 0.0 0.0
1-2 gk kN/m 0 0 0 0 0 0 1.44 0 0 0
Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 2.7 0.0 0.0 0.0
2-3 gk kN 0 0 0 0 0 0 1.44 0 0 0
Gk kN/m 0.0 0.0 0.0 0.0 0.0 0.0 2.3 0.0 0.0 0.0

[Link] 09/04/20[Link] p4
 Project Proposed Two Bedroomed Development
Location
Column C2 LOAD TAKE DOWN CALCULATIONS II sheet 2 of 2 Made by REL Job No 2206
COLUMN LOAD TAKE DOWN & DESIGN FOR SYMMETRICALLY REINFORCED RECT. COLUMNS BENT ABOUT TWO AXES TO BS 8110:1997 4-Sep-25
Originated from [Link] v2.1 © 1999-2003 BCA for RCC

TOTAL LOADS Location Column C2 TOTAL LOADS Location Column C2

7 6 5 4 3 2 1 0 0 0
A-B Gk kN = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0
Qk kN = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0
B-C Gk kN = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 24.5 +58.0 +3.6 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0
Qk kN = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 6.6 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0
1-2 Gk kN = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 13.3 +35.2 +2.7 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0
Qk kN = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 3.6 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0
2-3 Gk kN = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 11.2 +22.6 +2.3 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0 = 0.0 +0.0 +0.0
Qk kN = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 3.0 +0.0 = 0.0 +0.0 = 0.0 +0.0 = 0.0 +0.0
ie A-B Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
B-C Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 86.1 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 6.6 0.0 0.0 0.0
1-2 Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 51.2 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 3.6 0.0 0.0 0.0
2-3 Gk kN 0.0 0.0 0.0 0.0 0.0 0.0 36.1 0.0 0.0 0.0
Qk kN 0.0 0.0 0.0 0.0 0.0 0.0 3.0 0.0 0.0 0.0

FIXED END MOMENTS FIXED END MOMENTS

7 6 5 4 3 2 1 0 0 0
A-B (about yy) Gk kNm
N kNm
B-C (about yy) Gk kNm 86.1*2*0.0/8
N kNm (1.4*86.1+1.6*6.6)*2*0.0/
1-2 (about xx) Gk kNm 51.2*2*0.0/8
N kNm (1.4*51.2+1.6*3.6)*2*0.0/
2-3 (about xx) Gk kNm 36.1*2*0.0/8
N kNm (1.4*36.1+1.6*3.0)*2*0.0/

A-B (about yy) Gk kNm 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
N kNm 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
B-C (about yy) Gk kNm 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
N kNm 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
1-2 (about xx) Gk kNm 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
N kNm 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
2-3 (about xx) Gk kNm 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
N kNm 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

FEMxx about x- kNm MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0-
0.0)] 0.0)] 0.0)] 0.0)] 0.0)] 0.0)] 0.0)] 0.0)] 0.0)] 0.0)]
FEMyy about y- kNm MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0- MAX[abs(0.0-0.0),abs(0.0-
0.0)] 0.0)] 0.0)] 0.0)] 0.0)] 0.0)] 0.0)] 0.0)] 0.0)] 0.0)]

FEMxx about x- kNm 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
FEMyy about y- kNm 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

Moments in column
Moments in column
Mxx col abov kNm 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+5+50+59) 0.0*5/(5+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0)
about x-xcol belo kNm 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*5/(0+5+50+59) 0.0*0/(5+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0)

Mxx col abov kNm 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
about x-xcol belo kNm 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

Myy col abov kNm 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+5+0+42) 0.0*5/(5+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0)
about y-ycol belo kNm 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0) 0.0*5/(0+5+0+42) 0.0*0/(5+0+0+0) 0.0*0/(0+0+0+0) 0.0*0/(0+0+0+0)

Myy col abov kNm 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
about y-ycol belo kNm 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

[Link] 09/04/20[Link] p5
Project Proposed Two Bedroomed Development Made by REL Job No 2206
LocationColumn C2 BEAM/SLAB & COLUMN STIFFNESSES 4-Sep-25
COLUMN LOAD TAKE DOWN & DESIGN FOR SYMMETRICALLY REINFORCED RECT. COLUMNS BENT ABOUT TWO AXES TO BS 8110:1997 p1 OF 1
Originated from [Link] v2.1 © 1999-2003 BCA for RCC

Level 7 6 5 4 3 2 1 Level 7 6 5 4 3 2 1

A-B Span 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 B-C Span 0.000 0.000 0.000 0.000 0.000 0.000 5.000 0.000 0.000 0.000

slab depth m 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 slab depth m 0.000 0.000 0.000 0.000 0.000 0.000 0.150 0.000 0.000 0.000
width (o/a) m 0.000 0.000 0.000 0.000 0.000 0.000 3.500 0.000 0.000 0.000 width (o/a) m 0.000 0.000 0.000 0.000 0.000 0.000 3.300 0.000 0.000 0.000
A m2 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0 A m2 0.000 0.000 0.000 0.000 0.000 0.000 0.495 0.000 0.000 0.000
Ay m3 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 Ay m3 0.000 0.000 0.000 0.000 0.000 0.000 0.037 0.000 0.000 0.000
Ay^2 m 4
0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Ay^2 m 4
0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0028 0.0000 0.0000 0.0000
Ina m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Ina m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0009 0.0000 0.0000 0.0000

Beam depth m 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 Beam depth m 0.000 0.000 0.000 0.000 0.000 0.000 0.450 0.000 0.000 0.000
width (o/a) m 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 width (o/a) m 0.000 0.000 0.000 0.000 0.000 0.000 0.200 0.000 0.000 0.000
A m2 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 A m2 0.000 0.000 0.000 0.000 0.000 0.000 0.090 0.000 0.000 0.000
Ay m3 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 Ay m3 0.000 0.000 0.000 0.000 0.000 0.000 0.020 0.000 0.000 0.000
Ay^2 m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Ay^2 m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0046 0.0000 0.0000 0.0000
Ina m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Ina m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0015 0.0000 0.0000 0.0000

T-beam Ybar m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 T-beam Ybar m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0981 0.0000 0.0000 0.0000
Ina m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 Ina m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0042 0.0000 0.0000 0.0000
k m3 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 k m3 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000832 0.00E+00 0.00E+00 0.00E+00
k/2 m 3
0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 k/2 m 3
0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000416 0.00E+00 0.00E+00 0.00E+00
k/2 dm 3
0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000 k/2 dm 3
0.000 0.000 0.000 0.000 0.000 0.000 0.416 0.000 0.000 0.000

Level 7 6 5 4 3 2 1 Level 7 6 5 4 3 2 1

1-2 Span 0.000 0.000 0.000 0.000 0.000 0.000 3.800 0.000 0.000 0.000 2-3 Span 0.000 0.000 0.000 0.000 0.000 0.000 3.200 0.000 0.000 0.000

slab depth m 0.000 0.000 0.000 0.000 0.000 0.000 0.150 0.000 0.000 0.000 slab depth m 0.000 0.000 0.000 0.000 0.000 0.000 0.150 0.000 0.000 0.000
width (o/a) m 0.000 0.000 0.000 0.000 0.000 0.000 2.300 0.000 0.000 0.000 width (o/a) m 0.000 0.000 0.000 0.000 0.000 0.000 2.300 0.000 0.000 0.000
A m2 0.000 0.000 0.000 0.000 0.000 0.000 0.345 0.000 0.000 0.000 A m2 0.000 0.000 0.000 0.000 0.000 0.000 0.345 0.000 0.000 0.000
Ay m3 0.000 0.000 0.000 0.000 0.000 0.000 0.026 0.000 0.000 0.000 Ay m3 0.000 0.000 0.000 0.000 0.000 0.000 0.026 0.000 0.000 0.000
Ay^2 m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0019 0.0000 0.0000 0.0000 Ay^2 m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0019 0.0000 0.0000 0.0000
Ina m 4
0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0006 0.0000 0.0000 0.0000 Ina m 4
0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0006 0.0000 0.0000 0.0000

Beam depth m 0.000 0.000 0.000 0.000 0.000 0.000 0.450 0.000 0.000 0.000 Beam depth m 0.000 0.000 0.000 0.000 0.000 0.000 0.450 0.000 0.000 0.000
width (o/a) m 0.000 0.000 0.000 0.000 0.000 0.000 0.200 0.000 0.000 0.000 width (o/a) m 0.000 0.000 0.000 0.000 0.000 0.000 0.200 0.000 0.000 0.000
A m2 0.000 0.000 0.000 0.000 0.000 0.000 0.090 0.000 0.000 0.000 A m2 0.000 0.000 0.000 0.000 0.000 0.000 0.090 0.000 0.000 0.000
Ay m3 0.000 0.000 0.000 0.000 0.000 0.000 0.020 0.000 0.000 0.000 Ay m3 0.000 0.000 0.000 0.000 0.000 0.000 0.020 0.000 0.000 0.000
Ay^2 m 4
0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0046 0.0000 0.0000 0.0000 Ay^2 m 4
0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0046 0.0000 0.0000 0.0000
Ina m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0015 0.0000 0.0000 0.0000 Ina m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0015 0.0000 0.0000 0.0000

T-beam Ybar m 4
0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.1060 0.0000 0.0000 0.0000 T-beam Ybar m 4
0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.1060 0.0000 0.0000 0.0000
Ina m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0038 0.0000 0.0000 0.0000 Ina m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0038 0.0000 0.0000 0.0000
k m3 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000993 0.000000 0.000000 0.000000 k m3 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.001179 0.000000 0.000000 0.000000
k/2 m3 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000496 0.000000 0.000000 0.000000 k/2 m3 0.000000 0.000000 0.000000 0.000000 0.000000 0.000000 0.000589 0.000000 0.000000 0.000000
k/2 dm3 0.000 0.000 0.000 0.000 0.000 0.000 0.496 0.000 0.000 0.000 k/2 dm3 0.000 0.000 0.000 0.000 0.000 0.000 0.589 0.000 0.000 0.000

COLUMN STIFFNESSES

BELOW LEVEL 7 6 5 4 3 2 1

about xxI m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000
k dm3 0.000 0.000 0.000 0.000 0.000 0.000 0.048 0.000 0.000 0.000
k above 7 dm 3
0.000

about yyI m4 0.0000 0.0000 0.0000 0.0000 0.0000 0.0000 0.0001 0.0000 0.0000 0.0000
k dm3 0.000 0.000 0.000 0.000 0.000 0.000 0.048 0.000 0.000 0.000
k above 7 dm 3
0.0000

[Link] 09/04/2025 6
Disclaimer
All advice or information from the British Cement Association and/or Reinforced Concrete Counc
intended for those who will evaluate the significance and limitations of its contents and t
responsibility for its use and application. No liability (including that for negligence) for any
resulting from such advice or information is accepted by the BCA, RCC or their subcontract
suppliers or advisors. Users should note that all BCA software and publications are subjec
revision from time to time and should therefore ensure that they are in possession of the la
version.

This spreadsheet should be used in compliance with the accompanying publication 'Spreadshe
for concrete design to BS 8110 and EC2' available from British Cement Association, Telford Aven
Crowthorne, Berkshire RG45 6YS.

Status of spreadsheet
Public release version.

Revision history RCC51 Column Load Take-down & [Link]

Date Version
22-Jan-03 RCC51 v2.1
11-Oct-02 RCC51 v2.0

10-Oct-02 RCC51 v1.7

1-Oct-02 RCC51 v1.6

3-Apr-02 RCC51 v1.5

28-Mar-01 RCC51 v1.4

7-Jun-00 RCC51 v1.3

27-Mar-00 RCC51 v1.2

28-Feb-00 RCC51 v1.1

6-Aug-99 RCC51 v1.0

formation from the British Cement Association and/or Reinforced Concrete Council is
hose who will evaluate the significance and limitations of its contents and take
or its use and application. No liability (including that for negligence) for any loss
such advice or information is accepted by the BCA, RCC or their subcontractors,
visors. Users should note that all BCA software and publications are subject to
me to time and should therefore ensure that they are in possession of the latest

et should be used in compliance with the accompanying publication 'Spreadsheets

sign to BS 8110 and EC2' available from British Cement Association, Telford Avenue,
rkshire RG45 6YS.

This spreadsheet is shareware. It may be distributed freely, but may not be

used for commercial purposes until the user has registered with the RCC.

ory RCC51 Column Load Take-down & [Link]

Action Size (kB)

DETR logo replaced by DTI. 464
Version 2 enhancements 485
Mods for balanced sections at CDES!R38:AL38; Q65:T65 & I33
398
Mods at LOADTD!S36 etc. for convenience.
LOADTD!: C73:S73 : Modifications to suit BS6399 Pt1 1996.
New note at S39 re base fixity.(G Jack)
398
CDES! Chart at Z8 reactivated. Modifications to R42:Y42 to
help iteration procedure. Note re Walls at K22 (G Jack)
Cells U2:AC2 on DESMMNTS corrected to eliminate reducing
396
values.
Function in DESMMNTS!AD3:AD8 revised so correct Lo etc
used for appropriate storey.
Input for column sizes now in table in LOADTD!G36:P37. Not 394
CDES!
Minor formatting changes in LOADTD!, DESMMNTS! & CDES!.
gm included in DESMMNTS!G43, DESMMNTS!G14 & H14
393
corrected to use Lo for appropriate storey.
Mods to ltdcalc!G123:P133 & Stiffs!D65:O70 to corrcct
referencing of stiffnesses (G Dosser).LOADTD!f36:F38 made
412
active. CDES!AB66:AG77 unprotected to make combo box
work.
LOADTD line 33 made taller.
411
CDES!G22 made active
First public release.
411
Includes b version comments