30/10/2020 ASME issued CODES by the American Society of Mechanical Engineers (American Society of Mechanical Engineers) Applied

Page 1

ASME ISSUED CODES By the American Society of Mechanical Engineers Applied in

the different levels of the industry as a reference for standardization of measurements, mechanical designs, materials AS WELL AS

The terminology that involves that. It also refers to elevator Equipment and Components, Turbines, Pipes (flanges,

Connections, thicknesses, etc.), pressure equipment, tanks, valves, pumps, etc. Their application at the different levels of
Industry includes Mechanical Industry (matrix of CODES), petroleum, nuclear, food, automotive among others.

LIST OF ASME STANDARDS

ASME A112.1.2: air spaces in plumbing systems (for plumbing and water installations - connected receivers)
ASME A112.1.3: Air gap fittings for use with plumbing fixtures, appliances, and their accessories

ASME A112.14.1: Backwater valves

ASME A112.14.3: Grease interceptors

ASME A112.14.4: Grease Removal Devices

ASME A112.18.1: Faucet Accessories

ASME A112.18.2: Faucet Waste Accessories

ASME A112.18.3: Operating requirements for backflow prevention devices and systems in plumbing fittings

ASME A112.18.6: Flexible Water Connectors

ASME A112.18.7: bathtub / shower transfer valves with backflow protection

ASME A112.19.10: Double Flush Devices for Water Closets

ASME A112.19.12: wall mount and pedestal mount, adjustable and pivoting sink and sinks

ASME A112.19.13: Electro-hydraulic water cabinets

ASME A112.19.14: Six - Water closets equipped with a dual flush device - Supplement 1: 2003

ASME A112.19.15: Bathtubs / Whirlpool Bathtubs with Pressure Sealed Doors

ASME A112.19.1M: enameled cast iron Plumbing - Errata - November 1996, Supplement 2 - June 2000

ASME A112.19.3: Stainless Steel Accessories Home (Designed for residential use) - Supplement: September 2002

ASME A112.19.4M: Enamelled porcelain of formed steel Plumbing - Erratum - November 1996, Supplement 1 to 1998, and Supplement 2 -
June 2000

Unable to process the request as the provided link does not contain any translatable text. 1/13
30/10/2020 ASME issued CODES by the American Society of Mechanical Engineers Applied
ASME A112.19.5: Water Cut-off - toilets, tanks, and urinals
ASME A112.19.6: Hydraulic performance requirements for toilets and urinals - Included in A112.19.2-2003

ASME A112.19.7M: Hot Tub Appliances

ASME A112.19.9M: Non-vitreous Ceramic Pipe Installation - Supplement 1: 2002

ASME A112.20.1: Qualification of installers of high purity piping systems

ASME A112.20.2: Qualification of Firestop System Installers and devices for piping systems

ASME A112.21.2M: Waste drains - Revision of ANSI A112.21.2-1971

ASME A112.21.3M: Utility and maintenance hydrants Use-Review of ANSI 112.21.3-1976

Page 2

ASME A112.3.4: Grinding and related components sanitation systems

ASME A112.36.2M: cleaning records

ASME A112.4.1: Water heater relief valve drain pipes

ASME A112.4.14: manual operation, the District - Open the shutoff valves for use in plumbing systems

ASME A112.4.2: Closet Personal Hygiene Water Devices

ASME A112.4.3: Plastic accessories for connecting water closets to the sanitary drainage system

ASME A112.4.7: Point of Use and Submetering Water Systems

ASME A112.6.1M: Floor - Support attachments for off-the-shelf installations intended for general use

ASME A112.6.2: Framing - Supports for Off-the-Floor Water Closets with Concealed Tanks

ASME A112.6.3: floor drains and trench drains

ASME A112.6.9: Siphonic Roof Drains

ASME A120.1: Safety requirements for motorized platforms for building maintenance

ASME A13.1: Diagram for the Identification of Piping Systems

ASME A17.1: Safety Code for Elevators and Escalators - Addendum A: 2005 and Supplement: 08/12/2005

COMOME A17.1 HDBK: Safety Code for Elevators and Escalators

ASME A17.1 INTERPRETATIONS

Interpretations aA17.1-2003 Safety Code for Elevators and Escalators - Includes Interpretations No. 25 through 27

ASME A17.2: Guide for the Inspection of Elevators, Escalators, and Moving Walks

ASME A17.2.3: Inspector's Manual for escalators and moving walks includes the inspection procedures of

the escalators and moving ramps - Addendum A - 10/08/2000

ASME A17.3: Safety Code for Existing Elevators and Escalators - Interpretations 6

ASME A17.3 INTERPRETATIONS

Interpretations aA17.3-1996 Code of Safety for Existing Elevators and Escalators - Includes Interpretations No. 1 A

through 6

September 2002

ASME A17.5: elevators and escalators Equipment-CAN Electrical / CSA -B44.1-2004

ASME A18.1: Safety standard for platform elevators and stairway chairlifts

Invalid URL 2/13

30/10/2020 ASME issued CODES by the American Society of Mechanical Engineers Applied
ASME A90.1: Safety standard for Elevator Hoistway Belt
ASME A90.1 INTERPRETATIONS

Interpretations ASME A90.1-1997

ASME AG - 1: Air and Gas Treatment Nuclear Code Errata: 02/04; Addenda: 30/09/05

ASME AS-11: Personnel for codes, standards, and conformity assessment committees

REPEATER ASME B1 TECH: Uncertainty in the measurement of 60 degrees thread Gage Measurement Element (inch and metric)

ASME B1.1: Unified Inch Screw Threads (UN and UNR thread form)

ASME B1.10M: Unified Miniature Screw Topics

ASME B1.11: Microscope Objective Topic - Erratum - July 1972

ASME B1.12: Class 5 Interference - Fit Topic

ASME B1.13M: Metric screw topics: M Profile

ASME B1.15: Unified Inch Screw Threads (UNJ Thread Form) - Errata - March 1997

ASME B1.16M: Metric Screw Thread Measuring and Gaging Topics - Review of ANSI B1.16-1972

ASME B1.2: Unified Inch Screw Thread Gages and Calibration - Erratum 05 1992

ASME B1.20.1: General use pipe threads (inches) - Revision and renaming ASME/ANSI B2.1-1968
ASME B1.20.3: Dryseal Threads (inches) - Revision and redesignation of B2.2-1968

Page 3

ASME B1.20.5: Gaging for Dryseal Threads (inches)

ASME B1.20.7: Hose Screw Coupling Threads (inches)

ASME B1.21M: Metric screw threads: MJ Profile

ASME B1.22M: Measuring and Rating for MJ Series Metric Screws Topics - Revision of ANSI B1.22-1978

ASME B1.30: Screw Threads: Standard Practice for Calculating and Rounding Dimensions
ASME B1.3M: Thread Systems for Dimensional Acceptability Gauging - Topics on Metric and Inch Screws (ONU, UNR, UNJ, M, and MJ) -

erratas - 1994
ASME B1.5: Acme threads

ASME B1.7M: Nomenclature, Definitions, Symbols, and Letters for Screw Threads - Revision of ANSI B1.7-1977
ASME B1.8: Stub Acme thread screw

ASME B1.9: Thread support in inches 7/45 Degrees Degree form with 0.6 Pitch Basic thread engagement height
ASME B107.1: Socket Wrenches, Hand (Inch Series)

ASME B107.100: Wrenches - Incorporate B107.6, B107.9, B107.39, and B107.40

ASME B107.10M: Hand socket wrenches and accessories - Inch and metric series

ASME B107.11: Cutting Pliers: Diagonal Cut and Pliers, End

ASME B107.12: nut wrench

ASME B107.13: Pliers - Long nose, long reach

ASME B107.14: Hand Torque Tools (Mechanical)

ASME B107.15: flat head screwdrivers

ASME B107.16M: Scissors (for cutting metals, hand-held)

ASME B107.17M: Gages, openings Key, reference

ASME B107.18: Pliers: Wire Twister

ASME B107.19: Pliers, Retaining Ring

Invalid URL provided. No text to translate. 3/13
30/10/2020 ASME codes issued by the American Society of Mechanical Engineers (American Society of Mechanical Engineers) Applied

ASME B107.2: Socket wrenches, extensions, adapters, and universal joints, power unit (impact) (Inch Series)

ASME B107.20: Pliers: Installer of 's lines, iron worker's, gas, glass, wire, and laboratory
ASME B107.21: Crow's foot wrench

ASME B107.22M: Electronic Cutters - Errata - May 1999

ASME B107.23M: Pliers: Multiple Position, adjustable

ASME B107.24: Locking Pliers

ASME B107.25: Pliers: Performance Test Methods

ASME B107.27: Pliers: Multiple Position, electrical connector

ASME B107.28: Electronic torque instruments

ASME B107.29: Electronic tester, manual torque tools

ASME B107.30: Cross Handle Screwdrivers

ASME B107.31M: screwdrivers, Cross Tip Gaging

ASME B107.33M: Socket Wrenches, Impact (Metric Series)

ASME B107.34: Socket wrenches for spark plugs

ASME B107.35M: Cube (Type Spin, Grip Screwdriver) (Metric Series)

ASME B107.36: Pliers: Locking, clamping, and pipe squeezing - Shutdown

ASME B107.37: Pliers: Cutters / Strippers

ASME B107.38M: Electronic Pliers

ASME B107.4: Hand-held, Impact, Air and Electric Tool Conductors and Spindles (Tools)
percussion excluded

ASME B107.41:Claw Hammers - Safety Requirements

ASME B107.42M: Axes: Safety requirements

Page 4

ASME B107.43: Wood Division - Wedges

ASME B107.44: Glass cutters and wood chisels

ASME B107.45: Chisel and Punch Extraction / Electricians' Chisels

ASME B107.46: pins, screws, and tube extractors: Safety requirements

ASME B107.47M: metal chisels: Safety requirements

ASME B107.48: metal chisels, strikes, and drift pins

ASME B107.49: nail systems

ASME B107.50M: Brick chisels and brick sets: Safety requirements

ASME B107.51:Star Drills: Safety Requirements

ASME B107.52M: Nail - Bare Extractor: Safety Requirements

ASME B107.53: Peen Hammers: Safety Requirements

ASME B107.54: Heavy Impact Tools: Safety Requirements

ASME B107.55: Axes: Safety requirements

ASME B107.56: Repair hammers, body and Dolly Blocks: Safety requirements - Before ANSI /HTI B173.5-1991

ASME B107.57: Hammers for Bricklayers and Prospecting Picks: Safety Requirements

ASME B107.58M: remachado, the scale and Tinner's hammers configuration: Safety requirements

Unable to access the content of the provided URL. 4/13

30/10/2020 ASME issued CODES by the American Society of Mechanical Engineers applied
ASME B107.59: slugging and striking Wrenches

ASME B107.5M: Hand Socket Wrenches (Metric Series)

ASME B107.60: levers

ASME B107.8: Adjustable wrenches - Replaces ASME B107.8M

ASME B133.12: Procurement Standard for Gas Turbine Maintenance and Safety

ASME B133.16: Procurement Standard for Gas Turbines Marine Applications

ASME B133.5: Purchasing Standard for Gas Turbine of Electrical Apparatus

ASME B133.7M: Combustibles for gas turbines - Revision of ANSI B133.7-1977

ASME B133.8: installation of gas turbines with sound emission

ASME B133.9: Measurement of the exhaust emissions from stationary gas turbine engines - Revision of ANSI B133.9-1979

ASME B15.1: Safety standard for mechanical power transmission apparatus

ASME B15.1 INTERPRETATION

Interpretations aB15.1-2000 Safety Standard for Mechanical Power Transmission Devices

ASME B16.1: Cast Iron Pipe Flanges and Flanged Fittings Class 25

1
ASME B16.11: Forged accessories, welded and threaded fittings

ASME B16.12: Threaded cast iron drainage fittings

ASME B16.14: Plugs, bushings, and locknuts for ferrous piping with pipe threads

ASME B16.15: Threaded bronze cast fittings Classes 125 and 250

ASME B16.15 INTERPRETATIONS

Interpretations of B16.5-1985 Threaded bronze fittings Classes 125 and 250 - Includes interpretations 1

- 300, 400, 600, 900,

ASME B16.26: Cast copper alloy fittings for copper pipe fittings

ASME B16.28: Short radius elbows and returns of welded forged steel

INTERPRETATIONS ASME B16.28

PSI

Page 5

1/2 a 12, 125 psig maximum) ASME B16.39: Malleable iron threaded pipe fittings Class 150, -
3

ASME B16.50: Forged copper and copper alloy - Pressure fittings

ASME B16.9: Factory made forged butt welding fittings

ASME B16.9 INTERPRETATIONS

Interpretations of B16.9-1993 - Factory-made forged steel butt welding fittings - Includes interpretation 1

ASME B17.1: Keys and Keyseats

ASME B17.2: Woodruff Keys and Keyseats - Revision of USASB17F-1930

ASME B29.100: Precision Power Transmission, Double-Pitch Power Transmission and double Pitch roller conveyor chains.

The provided URL does not contain translatable text. 5/13

30/10/2020 ASME issued CODES by the American Society of Mechanical Engineers Applied
Sprockets and Chains - Incorporation of ASME B29.1, B29.3, and B29.4; Errata 01/2004
ASME B29.10M: Heavy-duty side bar roller chain power transmission and sprocket teeth
ASME B29.12M: Coated Steel Rollerless Chains, Implements and Sprocket Teeth

ASME B29.15M: Steel Roller Type Conveyor Chains, Implements and Sprocket Teeth
ASME B29.17M: Flat Top Hinge Type Conveyors and Sprocket Teeth

ASME B29.200: Welded steel chains of the type milling, welded steel type drive chains, Implements and Sprocket Teeth-The
Incorporation of ASME B29.16M and ASME B29.18M

ASME B29.21M

700 Class of welded steel and Casting Chains, Implements and sprockets for Water and Wastewater Treatment Plants

ASME B29.22: Forged link without rivets, chains, sprockets, chain drive dogs
ASME B29.23M: flexible coupling chain

ASME B29.24: Roller chains for hoisting chains

ASME B29.26M: Fatigue Test Power Transmission Roller Chain - Errata October 2002

ASME B29.27: Hollow transport chains, single tone and double tone, and accessories

ASME B29.2M: Inverted tooth chains (Silenced) and sprockets - (Revision of B29.2-1957 and B29.9-1958); errata - July 1985

ASME B29.300: Agricultural Chains, detachable and Pintle, Implements and Sprockets - Incorporation of ASME B29.6, B29.19 and B29.25; Addendum

2004

ASME B29.400: Combination, Mill 'H' Chains Type and Sprockets

ASME B29.8: Leaf chains, forks, and pulleys

ASME B30.1: Jacks

ASME B30.10: Hooks Safety standard for cable installations, cranes, towers, hoists, hooks, jacks, and slings

ASME B30.10 INTERPRETATIONS

Interpretations to B30.10-1993 Hooks

ASME B30.11: monorail and suspended cranes - Safety standard for cable installations, cranes, towers, lifts, hooks,
Cats and slings

ASME B30.11 INTERPRETATION

Interpretations of B30.11 - 1998 monorails and suspended cranes

ASME B30.12: Handling of Loads Suspended from Rotorcraft

ASME B30.13: Storage / Retrieval (S/R) Machines and associated equipment

ASME B30.13 INTERPRETATIONS

Interpretations to B30.13-1996 Storage / Retrieval (S / R) Machines and associated equipment

ASME B30.14: Side Arm Tractors

ASME B30.16: overhead (suspended) hoists

ASME B30.16 INTERPRETATIONS

Interpretations of B30.16-1998 overhead (suspended) hoists

ASME B30.17: general and gantry cranes (Overhead Running Bridge, single girder, suspended hoists)

Page 6

ASME B30.17 INTERPRETATIONS

Interpretations for B30.17-1998 above and gantry cranes (Top Running Bridge, single girder, suspended hoist)

ASME B30.18: Stackers (above or below the Execution Bridge, Multiple beam with Top or less than Trolley operation)

Invalid input. 6/13

30/10/2020 ASME codes issued by the American Society of Mechanical Engineers (American Society of Mechanical Engineers) Applied

hoist
ASME B30.19: Aerial Tramways

ASME B30.2: general expenses and gantry cranes (Top Running Bridge, single or multiple beam, Top Trolley Execution Hoist)

ASME B30.2 INTERPRETATIONS

Interpretations to B30.2-1996 overhead and gantry cranes Top Running, simple or multiple beam, Top Trolley Execution Hoist-Includes the

Interpretation No. 1 Through 3

ASME B30.20: Below the hook lifting devices

ASME B30.20 INTERPRETATIONS

Interpretations to B30.20-1993 below the hook lifting devices

ASME B30.21: manual lever of operated hoists

ASME B30.21 INTERPRETATIONS

Interpretations to B30.2-1994 Lever Operated Forklifts Manual

ASME B30.22: articulated crane joint

ASME B30.22 INTERPRETATIONS

Interpretations of B30.22-1993 Articulated Boom Cranes

ASME B30.23: Personal lifting systems

ASME B30.25: Waste and Handling Materials

ASME B30.26. Lifting Hardware Safety Standard for cable installations, cranes, towers, hoists, hooks, jacks, and slings.

ASME B30.3: Tower Crane Construction

ASME B30.3 INTERPRETATIONS

Interpretations of B30.3-1996 Hammerhead Tower Cranes

ASME B30.4: Portal, Tower and Pedestal Cranes

ASME B30.5: Mobile Cranes and Railways

ASME B30.5 INTERPRETATIONS

Interpretations to B30.5-1994 Mobile and Railway Cranes

ASME B30.6: Cranes

ASME B30.6 INTERPRETATIONS

Interpretations to B30.6-1995 Cranes

ASME B30.7: Base Mounted Drum Elevators

ASME B30.8: crane pontoons and floating cranes

ASME B30.8 INTERPRETATIONS

Interpretations on B30.8-1993 Floating cranes and floating crane

ASME B30.9: Slings

ASME B30.9 INTERPRETATIONS

Interpretations to B3: 0.9 to 1.996 slings

ASME B31.1: Feed piping

ASME B31.1 CASE NO. 25

Cases No. 25 of B31.1

ASME B31.1 CASE NO. 26

Cases No. 26 of B31.1

ASME B31.1 INTERPRETATIONS

Interpretations to B31.1-1998 Power Piping - Includes Interpretations No. 2 to 6, 8 to 10, 13, 15, 17 to 25, and 27 to 31

Invalid input. No text provided to translate. July 13

30/10/2020 ASME issued CODES by the American Society of Mechanical Engineers

Page 7

ASME B31.11:Pipeline transportation systems

ASME B31.11 INTERPRETATIONS

Interpretations of B31.11-1989 Slurry Transport Pipeline Systems

ASME B31.2: Fuel Gas Piping

ASME B31.3: process piping

ASME B31.3 INTERPRETATIONS

Interpretations to B31.3-1999 Process Piping - Includes Interpretations No. 1 Through 18

ASME B31.4: Pipeline transport systems for liquid hydrocarbons and other liquids

ASME B31.4 INTERPRETATIONS

Interpretations of B31.4-1998 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids - Includes Interpretation No.

ASME B31.5: Cooling and heat transfer piping components - Addenda: 2004

ASME B31.5 INTERPRETATIONS

Interpretations to B31.5-1992 Refrigeration Piping - Includes Interpretation No. 5

ASME B31.8: Transportation and Distribution Piping Systems

ASME B31.8 INT NO.11

Interpretations NO.11 of B31.8 Transportation and Distribution Piping Systems

ASME B31.8S: Gas Pipeline Integrity Management - Supplement ASME B31.8

ASME B31.9: Piping Services for Buildings

ASME B31.9 INTERPRETATIONS

Interpretations to B31.9-1996 for Piping Construction Services - Includes Interpretation No. 1-3
ASME B31G: Manual for determining the remaining strength of corroded pipe A Supplement to the ASME B31 Code for

pressure pipes
ASME B32.100: Preferred metric sizes for floor, round, square, rectangular, hexagonal, and metal products

ASME B32.3M: Preferred metric sizes for flat metal products

ASME B32.4M: Preferred metric sizes for round, square, rectangular, and hexagonal metal products - Revision of ANSI

B32.4-1977
ASME B32.5: Preferred metric sizes for metal tubular products other than tubes - Erratum - 1996

ASME B36.10M: welded and seamless forged steel pipe

ASME B36.19M: Stainless steel pipes

ASME B4.1: Preferred limits and fits for cylindrical parts

ASME B4.2: Preferred metric limits and fits

ASME B4.3: General tolerances for metric dimensioned products

ASME B40.100: Pressure Gauges and Attached Measuring Devices - The incorporation of ASME B40.1-1998 and ASME B40.7-1998; Addenda A - 31/12/2001

ASME B40.200: Thermometers, direct reading and reading distance - Addendum A: 2003
ASME B46.1: Surface texture (surface roughness, waviness, and Lay)

ASME B47.1: Gage blank spaces - Revision of ANSI / ASME B47.1AM-1982

ASME B5.10: Tapered Machine

ASME B5.11: Spindle nose and adjustable adapters for multi-spindle drilling Heads One of a series of standards for the

small tools and elements of the machine tool

ASME B5.18: Spindle nose and tool holders for milling machines

ASME B5.1M: T-Slots, bolts, nuts, and tongues - Revision of ANSI B5.1-1975, should be used in place of ANSI B5.1, which has been canceled.

Invalid input. Please provide the text you want to be translated. 8/13
October 30, 2020 ASME issued CODES by the American Society of Mechanical Engineers applied
in 1985
ASME B5.25: punch sets and the matrix

ASME B5.25M: punch and die Sets (metric)

Page 8

ASME B5.35: Machines Mounting specifications for abrasive discs and mounted wheels - Erratum - October 1985

ASME B5.40: Spindle nose and tool handles for horizontal drilling installations
ASME B5.47: Milling Machine Arbor Assemblies

ASME B5.48: Screws - Errata Ball - March 1979

ASME B5.49: Press Feed Glossary Terms

ASME B5.50: "V" Tool holders flange for machining centers with automatic correction Tool changers - Errata - February

1995

ASME B5.51M: Preferred SI Units for Machine Tools

ASME B5.52: Power presses: general use, single point Type Gap

ASME B5.54: Methods for the Performance Evaluation of Computer Numerical Control Machining Centers

ASME B5.55M: Specifications and standard performance, press power brakes

ASME B5.56M: Specifications and standard performance, Energy scissors

ASME B5.57: Methods for the Performance Evaluation of Computer Numerical Control Lathes and Turning Centers

ASME B5.60: Workholding Chucks: Jaw Chuck Type - The incorporation of ASME B 5.60.1 and ASME B5.60.4

ASME B5.61: Energy presses: general use, single action, straight side type

ASME B5.8: Chucks and Jaws

ASME B5.9: Spindle nose for tool room lathes, lathes, turret lathes, and automatic lathes.

ASME B56.1: Safety standard for Low Lift Trucks and High Lift Capacity

ASME B56.1 INTERPRETATIONS

Interpretations of B56.1 Safety Standard for Low Lift Trucks and High Lifting Capacity

ASME B56.10: Safety standard for manually propelled High Lift Trucks Industrial Notice-Special - October 1993
ASME B56.11.1: Double or two-level rotating and rigid industrial notice wheels - October 1993

ASME B56.11.4: Fork type hooks and fork trucks for powered industrial trucks - Special Notice - February

1993; Addenda A - 07/22/1994

ASME B56.11.5: The sound measurements emitted by low elevation, high elevation, and rough terrain Powered Industrial Warning

Trucks-Special - October 1993; Addendum A - 15/11/1994

ASME B56.11.6: Assessment of the visibility of powered industrial vehicles

ASME B56.11.7: propane gas (LPG) Liquid fuel cylinders (horizontal or vertical) Installation - Removal of liquids - for vehicles

motorized industrial

ASME B56.5: Safety standard for guided industrial vehicles and automated functions of powered industrial vehicles

ASME B56.5 INTERPRETATIONS

Interpretation of Standard B56.5-1993 Safety for Industrial Trucks and Automated Functions of Industrial Vehicles

crewed

ASME B56.6: Safety standard for All-Terrain Forklifts Trucks - Erratum 3/2003

ASME B56.6 INTERPRETATIONS

Interpretation of Standard B56.6-1993 Safety in Rough Terrain Forklifts

The provided input is not translatable text. September 13

30/10/2020 ASME codes issued by the American Society of Mechanical Engineers.

ASME B56.8: Safety Standard for Personnel and Load Carriers - Addenda A - 10/15/1994

ASME B56.8 INTERPRETATIONS

Interpretations of B56.8-1993 Safety Standard for Personnel and Load Carriers

ASME B56.9: Safety standard for Industrial Tow Tractor Operator - Addendum A - 1992

ASME B56.9 INTERPRETATIONS

Interpretation of Standard B56.9-1992 Safety for the Operator of Controlled Industrial Trailer Tractors

ASME B73.1 Specifications for horizontal end suction centrifugal pumps for chemical processes - Replaces B73.1M

ASME B73.2: Specifications for vertical in-line centrifugal pumps for chemical processes
ASME B73.3: Specification for metal sealless horizontal end-suction centrifugal pumps for chemical processes

Page 9

ASME B73.5M: Specification for thermoplastic centrifugal pumps with horizontal end suction polymeric materials and

thermostable for Chemical Processes

PAPELTECNICOASME B89: Placement of the plate Testing recommendations for coordinate measuring machines

ASME B89 TECH REPEAT: parametric calibration of Coordinate Measuring Machines - Erratum 03 2002

ASME B89.1.10M: Dial Indicators (for linear measurements)

ASME B89.1.13: Micrometers

ASME B89.1.17: Measurement of thread measurement cables

ASME B89.1.2M: Calibration of contact standard blocks comparison methods (Through 20 inches and 500 mm)

ASME B89.1.5: Measurement of smooth exterior diameters for use as master discs or cylindrical plug gauges
ASME B89.1.6: Measurement of smooth inner diameters for use as master rings and ring gauges

ASME B89.1.9: Errata bricks of caliber: 12/2003

ASME B89.3.4M: Rotational axes methods for specification and testing

ASME B89.4.1: Methods for the Evaluation of Coordinate Measuring Machine Measurement Performance - Revision of ASME B89.1.12M

1990; Addendum A - 08/06/1998; Addendum B - 8/2/2002

ASME B89.4.10: Methods for the Evaluation of the Performance of Coordinate Measuring Systems Software - Errata September

2003

ASME B89.4.22: Methods for the Assessment of the Performance of Articulated Coordinate Measuring Arm Machines - Date of Issue:
December 8, 2005

ASME B89.6.2: temperature and humidity environment for dimensional measurement

ASME B89.7.2: Measurement of dimensional planning

ASME B89.7.3.1: Guidelines for responsible parties Rules: Considering the measurement uncertainty in the determination of

compliance with the specifications

ASME B89.7.3.3: Guidelines for assessing the reliability of dimensional measurement uncertainty

ASME B94.11M: Drills

ASME B94.19: End mills and cutters

ASME B94.2: Reamers

ASME B94.21: Gear shaper cutters

ASME B94.33: Bushing Template

ASME B94.33.1: Bushings (metric)

The provided link does not contain translatable text. October 13

30/10/2020 ASME issued CODES by the American Society of Mechanical Engineers Applied
ASME [Link] screwdrivers, Split-sleeve, Collet Type
ASME B94.37M: Roller Turner Cutting Tool, single point of revisions B94.37-1972

ASME B94.49: Spade drill bits and spade drill holders

ASME B94.50: nomenclature and basic definitions of single point cutting tools
ASME B94.51M: Specifications for Band Saws for Metal Cutting ()

ASME B94.52M: Specifications for saw blades

ASME B94.53 solid rectangular steel cutting square shear knives dimensional tolerances

ASME B94.54: Specifications for drill saws, hole considered canopies and hole considered accessories

ASME B94.55M: Tool Life Testing with a Single Inflection Point Tools - Review of ANSI B94.34-1946 and B94.36-

1956

ASME B94.6: knurling

ASME B94.7: Plates

ASME B94.9: Taps: Ground and Cut Threads (Inches and Metric) - Errata - October 2001

ASME B96.1: aluminum alloy storage tank welds

ASME BPE: Bioprocessing Equipment Addenda-A: 2.004

Page 10

ASME CDS-1: Safety Controls and Devices for Automatically Fired Boilers
INTERPRETATIONS ASME CDS-1

The interpretations of the CDS-1 Controls and Safety Devices for automatically firing Boilers - Includes interpretations with

from February 1989 to June 2001

ASME FAP-1: Quality Assurance Program Requirements for Fastener Manufacturers, Distributors and

essay

ASME GUIDE 2001: Guide for ASME sealing ports

ASME HPS: High Pressure Systems

ASME HST-1: Performance Standard for Electric Chain Hoists

ASME HST-2: Performance Standard for Manually Operated Chain Hoists

ASME HST-3: Performance Standard for Manually Operated Chain Hoists

ASME HST-4: Performance Standard for Electric Wire Rope Hoists

ASME HST-5: Performance Standard for Air Chain Hoists

ASME HST-6: Wire Rope Elevator Performance Standard

ASME MFC-10M: Method for establishing the installation effects of flow meters

ASME MFC-11M: Measurement of fluid flow using Coriolis Mass flowmeters

ASME MFC-14M: Measurement of Fluid Flow Using Small Diameter Orifice Precision Meters

ASME MFC-16M: Measurement of fluid flow in closed conduits using electromagnetic flowmeters

ASME MFC-18M: Measurement of fluid flow using variable area meters

ASME MFC-1M: Glossary of terms used in fluid flow measurement in pipelines

ASME MFC-2M: Uncertainty in Fluid Flow Measurement in Closed Conduits

ASME MFC-3M: Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi - Date of Issue: 15/08/2005

ASME MFC-4M: Gas flow measurement Turbine Meters

Invalid request. No text provided for translation. 11/13

30/10/2020 ASME issued CODES by the American Society of Mechanical Engineers Applied

ASME MFC-5M: Measurement of liquid flow in closed conduits using ultrasonic transit-time flowmeters

ASME MFC-6M: Measurement of fluid flow in pipes using vortex flow meters

ASME MFC-7M: Measurement of gas flow through critical flow Venturi nozzles

ASME MFC-8M: Fluid flow in closed conduits: Pressure connections signal transmitters between primary devices and

Secondary

ASME MFC-9M: Measurement of liquid flow in closed conduits by weighing methods Errata - December 1989

ASME MH1: Pallets, protective sheets and other supports for load units

ASME N278.1: electrically operated automatic safety valves related to series equipment functions,
reactor plants and their maintenance

ASME N509: Nuclear power cleaning air plant units and components
ASME N509 INTERPRETATIONS

Interpretations of N509 1989 - Nuclear power cleaning air unit plants and components

ASME N510: Nuclear Air Treatment Systems Testing - Errata: January 1991

ASME NOG-1: Rules for the construction of roof and gantry cranes (Top Running Bridge, Multiple Beam)

TECHNICAL REPRODUCTION OF DEMAND

Comparison of ASME NQA-1 and ISO 9001

ASME NQA-1: Quality assurance requirements for nuclear facility applications

ASME NQA-1 INTERPRETATIONS

Interpretations of NQA-1-2000 edition requirements for quality assurance in nuclear facility applications
ASME NUM-1: Rules for the construction of cranes, monorails, and Elevators (With bridge or tram or suspended type elevation)

ASME OM CODE
Code of Operation and Maintenance of Nuclear Power Plants - Addendum A: 2005

Page 11

ASME OM CASOS CODE

Cases Code to OM Code CODE for the operation and maintenance of nuclear power plants

ASME OM CODE INTERPRETATIONS

Interpretations of OM CODE-1998 Operation and Maintenance Code for Nuclear Power Plants

ASME OM-S / G: Standards and Guidelines for the Operation and Maintenance of Nuclear Power Plants - Addendum A: 2004; Annex B: 2005

ASME PALD: Safety standard for portable automotive lifting devices

ASME PALD INTERPRETATIONS

Interpretations aPALD-1997 Safety standard for portable automotive lifting devices

ASME PCC-1: Guidelines for the Pressure Boundary Bolted Flange Assembly
ASME PTC 12.5: Single Phase Heat Exchangers

ASME PVHO-1: Safety standard for pressure vessels for human occupancy

ASME PVHO-2: Safety standard for pressure vessels for human occupancy Guidelines for the service of acrylic PVHO

Windows
ASME QAI-1: Requirements for Authorized Inspection

INTERPRETATIONS ASME QAI-1

Interpretations to QAI-1-1995 Requirements for Authorized Inspection

Invalid input provided 12/13

30/10/2020 ASME codes issued by the American Society of Mechanical Engineers applied
ASME QEI-1: Standard for the Qualification of Elevator Inspectors
ASME QFO-1: Standard for the Qualification and Certification of High Capacity Fossil Fuel Fired Plant Operators

ASME QHO-1: STANDARD FOR THE QUALIFICATION AND CERTIFICATION OF HAZARDOUS WASTE INCINERATOR OPERATORS
ASME QME-1: Classification of active mechanical equipment used in nuclear power plants

ASME QMO-1: Training and Certification of Medical Waste Incinerator Operators

ASME QRO-1: Training and Certification for Resource Recovery Fund Operators-Addendum A - 30/09/1996; Annex B -

May 15, 1998

ASME RTP-1: Reinforced thermosetting plastic equipment - Corrosion-resistant addition A: 2001; Addenda B: 2002; Annex C:

2003; Annex D: 2004

INTERPRETATIONS ASME RTP-1

Interpretations of RTP-1-1995 Armor Resistant Equipment to Thermosetting Plastic Corrosion

ASME SI-1: Guidance and Guidelines for the Use of SI Units (metric)

ASME STS-1: Steel Stacks-Addendum A: 2003

ASME TDP-1: Recommended Practices for Preventing Water Damage to Steam Turbines Used for Power Generation

electric
ASME Y14.1: Decimal inches that draw Sheet size and format

ASME Y14.100: Technical drawing practices

ASME Y14.13M: Mechanical Representation Spring

ASME Y14.1M: Drawing Metric Sheet Size and Format

ASME Y14.24: Types and Applications of Engineering Drawings - Revision of ASME Y14.24M-1989

ASME Y14.2M: Line and Letter Conventions

ASME Y14.3: Multiview and sectional view Drawings

ASME Y14.32.1M: Chassis Frames - Passenger Cars and Light Trucks - Ground Vehicle Practices

ASME Y14.34M: Associated Lists

ASME Y14.35M: Review of engineering drawings and associated documents

ASME Y14.36M: Surface Texture Symbols

ASME Y14.38: Abbreviations and acronyms - Revision and redesignation of ASME Y1.1-1989; Addenda A-2002

ASME Y14.41: Definición digital de producto DataASME B29.27br / / span / spanbr /: Norma de seguridad para recipientes a presión
for human occupation Guidelines for acrylic PVHO Windows Practices in Service

Page 12

ASME Y14.42: Digital Approval Systems

ASME Y14.43: Dimensioning and Tolerancing Principles for Gages and Fixtures - Errata: July 2005

ASME Y14.4M: Pictorial Drawing

ASME Y14.5.1M: mathematical definition of Dimensioning and Tolerance Principles

ASME Y14.5.2: Certification of geometric dimensions and tolerances Professionals

ASME Y14.5M: Acotación y toleranciaASME Y14.6: Representación de rosca de tornilloASME Y14.7.1: Normas de dibujo de engranajes - Parte

1 for spur, helical, double helical, and partial rack of revisions Y14.7-58ASME Y14.7.2: Gear and Spline Drawing Standards Part 2 - Bevel and

Hypoid gears ASME Y14.8M: Casting and forging

Invalid Input 13/13