Scribd
Upload
70 views1 page

R 934 C-Litronic Operating Instructions

The document provides operating instructions for various control elements of a machine, including an overload warning device, rotating device activation, automatic low idling, and high-speed gear. Each function can be activated or deactivated by pressing corresponding switches, with LED indicators showing the status. Additionally, the timing for automatic low idling can be adjusted between 2 and 9 seconds by holding the switch during a blinking sequence.

Uploaded by

Quang Huy Triệu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
70 views1 page

R 934 C-Litronic Operating Instructions

The document provides operating instructions for various control elements of a machine, including an overload warning device, rotating device activation, automatic low idling, and high-speed gear. Each function can be activated or deactivated by pressing corresponding switches, with LED indicators showing the status. Additionally, the timing for automatic low idling can be adjusted between 2 and 9 seconds by holding the switch during a blinking sequence.

Uploaded by

Quang Huy Triệu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Control and operation Operating instructions

Operating and control elements

S18 – Overload warning device (optional extra)


Press switch.
Overload warning device is activated.
LED in the switch illuminates.
Press switch again.
Overload warning device is deactivated.
LED in the switch goes out.
If no overload warning device is built in.
Press switch.
The symbol for "No overload warning device is present" appears on the moni-
toring screen.

LED in the switch illuminates.


Press switch again.
The symbol for "No overload warning device is present" goes out.
LED in the button goes out.
S19 – Activation of rotating device
Press switch.
The function rotating device (eg. rotating grapple) is activated.
LED in the switch illuminates.
Press switch again.
The function rotating device is deactivated.
LED in the switch goes out.
S20 – Automatic low idling
Press switch.
Automatic low idling is activated.
LED in the switch illuminates.
Press switch again.
Automatic low idling is deactivated.
LED in the switch goes out.
The timing set of automatic low idling can be done as follows using push button S20.
Activate the automatic low idling and keep the button S20 depressed.
After a few seconds the light diode will start blinking rapidly.
Release the push button when the blinking duration has reached the desired time.
Adjustment is possible between 2 and 9 seconds.

S21 - High speed gear


Press the switch.
Transfer from slow drive to fast drive is activated.
LED 1 in the switch illuminates.
While driving, the machine will automatically transfer from slow drive to fast drive.
LED 2 illuminates after transfer to fast drive.
Press switch again.
Transfer from slow drive to fast drive is deactivated.
LED 1 in the switch goes out.

3-6 R 934 C-Litronic / 10070206


MJFCIFSS

You might also like