[Link].

com/scientificreports

OPEN A novel smart baby cradle system

utilizing IoT sensors and machine
learning for optimized parental
care
Kunal Chandnani1, Suryakant Tripathy1, Ashutosh Krishna Parbhakar1, Kshitij Takiar1,
Urvi Singhal1, P. Sasikumar 1 & S. Maheswari 2
The IoT Smart Cradle for Baby Monitoring System & Infant Care is introduced as an innovative
solution to address critical gaps in contemporary infant care. This system integrates Internet of Things
(IoT) technology, machine learning, and smart automation to offer a safer, more responsive, and
comfortable environment for babies. A significant challenge in current infant care is the limitations
of traditional monitoring systems. These systems often fail to provide comprehensive, real-time
monitoring of essential environmental parameters and lack automated responses to an infant’s
immediate needs, potentially increasing parental anxiety and compromising infant safety and well-
being. This smart cradle is designed to overcome these limitations by employing a comprehensive
network of sensors—including temperature, humidity, gas, noise sensors, and a cry-detection
microphone—to monitor the baby’s needs and environmental conditions in real time. Microcontrollers
like Raspberry Pi and NodeMCU use intelligent machine-learning algorithms to process the collected
data and trigger adaptive responses. These responses include regulating temperature and humidity,
filtering harmful gases, and activating a motorized rocking mechanism to soothe the infant. A
dedicated mobile application offers parents secure, real-time monitoring and control over the cradle’s
functions. The system demonstrates high accuracy in sensor readings, with temperature and humidity
measurements reaching approximately 99.6% accuracy, and cry detection achieving approximately
93.2% accuracy. User feedback indicates that 95% of parents found the interface easy to use, and 87%
reported a positive impact on their parenting experience. In contrast to traditional solutions that often
require manual intervention or provide limited automation, this smart cradle uses predictive analytics
to proactively address potential discomforts and hazards, thus presenting a more reliable, intelligent,
and user-friendly solution for modern parenting.

Keywords Smart cradle, IoT, Baby comfort, Cry detection, Machine learning, Infant monitoring, Automated
rocking, Raspberry Pi, Parenting innovation

Ensuring an infant’s safety and comfort, particularly during sleep, is a significant concern for parents. Traditional
cradles require continuous supervision, while existing smart monitoring solutions often suffer from limited
accuracy, high false alarm rates, and a lack of real-time intervention. Many available systems focus on isolated
parameters such as temperature or sound detection but fail to provide a comprehensive, adaptive response to an
infant’s needs. This paper presents a novel IoT-enabled smart cradle that integrates high-precision environmental
sensing, AI-driven cry detection, real-time motion monitoring, and automated soothing mechanisms to
enhance infant care. By leveraging advanced sensor fusion and machine learning techniques, the proposed
system actively monitors and responds to changes in the infant’s environment and behavior, providing real-time
alerts and automated interventions.
The smart cradle is equipped with DHT22 and MQ135 sensors for precise temperature, humidity, and air
quality monitoring, dynamically adjusting environmental conditions to ensure an optimal sleeping environment.
A deep learning-based cry recognition model, utilizing convolutional neural networks (CNN) and Fast Fourier
Transform (FFT) analysis, achieves 93.2% accuracy in distinguishing different types of cries, reducing false

1School of Electronics Engineering, Vellore Institute of Technology, Vellore, India. 2School of Computer
Science and Engineering, Vellore Institute of Technology, Chennai, India. email: sasikumar.p@[Link];
maheswari.s@[Link]

Scientific Reports | (2025) 15:19080 | [Link] 1

[Link]/scientificreports/

alarms and improving caregiver response times. Additionally, HX711 load cells and motion sensors continuously
track the infant’s position, minimizing the risk of unsafe sleeping postures and falls. To further enhance infant
comfort, the system features an intelligent motorized rocking mechanism and an integrated lullaby system, both
of which adapt to the infant’s needs based on real-time data.
A key aspect of this work is the development of a user-friendly mobile application that allows caregivers
to monitor real-time data, review historical trends, and receive AI-driven alerts. Compared to prior studies,
such as those by Basak et al.1 and Suryawanshi et al.2, which lack adaptive environmental control and robust
cry recognition, this system offers superior sensor accuracy (99.6% for temperature, 98.1% for motion), lower
false alarm rates (2.3 activations per day), and a modular, scalable architecture. By integrating multi-sensor data
with AI-driven decision-making, this system provides a more reliable and efficient solution for modern infant
monitoring, setting a new benchmark in smart cradle technology.

Literature review
Historical development of infant monitoring technologies
Early monitoring systems (1960s–1990s)
The evolution of infant monitoring technologies traces its roots to the 1960s with the introduction of basic
audio devices that allowed parents to hear their babies from a distance. Early systems, like first-generation audio
monitors, were largely mechanical, offering limited functionality. As technology advanced through the 1970s
and 1980s, wireless communication became a pivotal feature, significantly improving reliability and range. The
1990s witnessed the introduction of video capabilities, marking a leap toward more comprehensive monitoring
solutions. Richardson et al.3 highlight these critical stages of technological innovation, noting how each phase
contributed to the foundation of modern infant care technologies.

Digital revolution in infant care (2000–2015)

The shift to digital technology in the 2000s marked a transformative period for infant monitoring. Alhagie
Sallah4 describe the introduction of Digital Enhanced Cordless Telecommunications (DECT) technology, which
eliminated interference from other household electronics, paving the way for clearer audio communication. This
period also saw the rise of digital video monitoring systems, which allowed parents to visually monitor their
infants remotely. Additionally, environmental sensors began to gain traction, providing data on temperature,
humidity, and air quality in the baby’s room. These technologies were often integrated into systems with two-
way communication, allowing parents not only to monitor their baby but also to communicate with them from
a distance.

Emergence of connected care (2015–present)

From 2015 onwards, infant monitoring technologies have experienced an era of rapid innovation, driven by
the convergence of cloud computing, artificial intelligence (AI), and the Internet of Things (IoT). Zhang et
al.5 discuss the integration of cloud-based monitoring systems that allow real-time data access from anywhere,
offering increased flexibility for parents. These systems leverage AI-driven analysis to assess a baby’s health
parameters, detect anomalies, and trigger alerts for caregivers. Additionally, IoT sensor networks, which provide
continuous data streams from a variety of connected devices, have revolutionized infant care, offering more
personalized and responsive monitoring solutions.

Contemporary IoT integration in infant care

Smart cradle architectures
As the demand for more advanced infant care solutions grows, recent research has focused on the development
of smart cradles. These systems integrate multiple sensors and advanced processing technologies to provide
comprehensive care. Alam et al.6 propose a multi-layered system architecture consisting of three primary
components: a sensor layer for data collection, a processing layer for data analysis, and an application layer for
user interaction. This architecture enables smart cradles to not only monitor but also respond to the infant’s
needs dynamically.
Martínez7 also discuss the integration of distributed sensor networks and edge computing to support real-
time decision-making. The mobile interfaces that connect these systems to caregivers are designed to be intuitive,
offering a seamless experience for parents while ensuring the baby’s well-being through efficient monitoring.

Advanced monitoring systems

The capabilities of infant monitoring have expanded beyond basic metrics like heart rate and temperature.
Lake-Thompson et al.8 introduced non-invasive physiological monitoring systems that track parameters such
as heart rate, breathing patterns, sleep states, and movement. These systems are designed to be comfortable and
unobtrusive, improving the quality of care for infants.
In addition, environmental control technologies, as detailed by Chen et al.9, have become increasingly
sophisticated. Adaptive systems now regulate room temperature, humidity, and air quality to optimize the
infant’s environment. These solutions offer a more holistic approach to infant care, integrating physical comfort
with health monitoring.

Sensor technologies and data integration

Advanced sensing solutions
Advances in sensor technologies have significantly expanded the range of information that can be monitored in
real-time. Yamamoto et al.10 highlight innovative biometric sensors, such as radar-based vital sign monitoring,
thermal imaging for temperature detection, and pressure-sensitive matrices for detecting subtle movements.

Scientific Reports | (2025) 15:19080 | [Link] 2

[Link]/scientificreports/

These sensors allow for more detailed and accurate monitoring without requiring direct contact with the baby,
which is crucial for comfort and safety.
Environmental sensors have also seen tremendous advancements. Course et al.11 studied multi-parameter
systems capable of detecting volatile organic compounds (VOCs), particulate matter, and carbon dioxide. Such
sensors are particularly valuable in ensuring that the infant’s environment remains clean, safe, and healthy.

Data processing and analytics

To handle the growing complexity of data generated by these sensors, researchers have turned to edge computing.
Rodriguez et al.12 propose edge computing solutions that allow for real-time data processing and local decision-
making. These technologies reduce latency and ensure that responses to monitoring data are quick and efficient,
which is essential for the safety and comfort of the infant.
Cloud-based analytics platforms, as discussed by Hu and Zheng13, provide scalable storage solutions and
advanced analytics capabilities. These platforms integrate machine learning algorithms for pattern recognition,
enabling predictive insights that help caregivers better understand their baby’s needs.

Artificial intelligence and machine learning applications

Cry analysis and response
AI-powered cry analysis systems, as explored by Park et al.14, represent a significant leap in infant monitoring.
These systems use emotion detection algorithms to classify the causes of a baby’s cry, such as hunger, discomfort,
or pain. By learning the baby’s unique patterns, these systems can even initiate automated responses, such as
alerting parents or adjusting the environment.

Behavioral pattern recognition

Kulvicius et al.15 developed systems to monitor an infant’s sleep and activity levels. These systems use behavioral
pattern recognition algorithms to assess comfort states and predict when the baby might need attention, ensuring
a proactive approach to care.

Predictive analytics
AI-driven predictive analytics is another area that has gained traction in recent years. Lee et al.16 introduced
models that predict an infant’s sleep cycle, feeding times, and other behaviors. These models can help caregivers
better plan for the baby’s needs, leading to more efficient care and reduced stress.

Mobile and user interface technologies

Mobile application development
Mobile applications have become an essential tool for modern infant monitoring systems. Garcia et al.17 discussed
the development of real-time monitoring dashboards that allow caregivers to view live data and receive alerts
on their mobile devices. Customizable alert systems ensure that parents are informed immediately if the baby
requires attention.

User experience enhancement

Improving the user interface and experience is crucial for ensuring that these systems are effective and accessible.
Peng and Fu18 focused on designing intuitive mobile interfaces that provide contextual information and
emergency response systems. These systems are designed to be user-friendly, especially for parents who may
not be tech-savvy, ensuring that the technology complements rather than complicates the caregiving process.

Security and privacy frameworks

Data protection mechanisms
Given the sensitive nature of health data, securing the information gathered by monitoring systems is paramount.
Coquoz et al.19 proposed security frameworks that include end-to-end encryption, secure data storage, and
access control mechanisms. These systems ensure that the data is protected from unauthorized access while still
being available to authorized users.

Network security
Wilson and Fredricks20 address network security issues, such as intrusion detection and secure communication
protocols. These measures are critical for protecting the data transmitted between the monitoring devices and
caregivers, ensuring that privacy is maintained.

Power management and sustainability

Energy efficiency
As monitoring systems become more complex, efficient power management becomes essential. Morchid et al.21
developed energy optimization solutions, including low-power sensing modes and solar integration options.
These advancements help extend the battery life of monitoring devices, reducing the need for frequent recharging.

Sustainable design
Sustainability is another key consideration in the design of infant monitoring technologies. Ali22 emphasize
the use of eco-friendly materials and energy-efficient components in system design. These solutions aim to
minimize environmental impact while maintaining performance.

Scientific Reports | (2025) 15:19080 | [Link] 3

[Link]/scientificreports/

Standards and regulatory compliance

Safety standards
Compliance with safety standards is crucial in the development of infant monitoring systems. Bikson et al.23
detail international safety standards and regulations, including EMC and material safety guidelines. These
standards ensure that monitoring devices are safe for use in a baby’s environment.

Certification processes
Lowell24 provided an overview of the certification processes that these systems must undergo to ensure quality
and safety. Testing procedures, documentation requirements, and compliance verification are all part of the
certification process that manufacturers must navigate.

Emerging technologies and future directions

Advanced sensing technologies
Aslam et al.25 explore the potential of quantum sensing and bioelectric monitoring for infant care. These
technologies promise to offer even more precise and detailed monitoring, which could revolutionize infant care
in the future.

Integration of emerging technologies

Sutradhar et al.26 investigate the integration of blockchain, quantum computing, and extended reality interfaces
in infant care systems. These emerging technologies could enable more secure, efficient, and interactive systems
for both caregivers and infants.

Future research areas

Alam et al.6 identify autonomous care systems and bio-feedback technologies as key areas for future research.
These systems could potentially automate many aspects of infant care, allowing for more personalized and
efficient care solutions.

Challenges and limitations

Technical challenges
Despite the advancements in technology, there are still several challenges to overcome. Wilson et al.27 highlight
issues related to sensor accuracy, power consumption, and the complexity of integrating various systems into a
unified solution.

Implementation barriers
Chen et al.9 point out the financial and technical barriers to widespread adoption of advanced monitoring systems.
The high cost of production and the technical complexity of the systems may hinder their implementation,
especially in low-resource settings.

Economic and market analysis

Market trends
Duffy28 provide an analysis of the market trends in infant monitoring technology, highlighting the growth of
consumer adoption, regional market variations, and the impact of price sensitivity on purchasing decisions.

Economic considerations
Senthur et al.29 examine the economic factors involved in the production and distribution of these systems,
offering a cost–benefit analysis and discussing strategies for market positioning and distribution.

Key findings
The literature review highlights the continuous advancements in IoT-based smart infant care systems. From
early audio monitors to the current integration of AI, IoT, and cloud-based technologies, these innovations have
significantly transformed how infant health is monitored and managed. While challenges remain, particularly
in terms of security, power management, and cost, ongoing research promises to address these issues. Future
directions point toward more autonomous, intelligent systems that balance technological sophistication with
practical usability, providing increasingly personalized and predictive care solutions.

Proposed system
The proposed IoT-based Smart Cradle for Baby Monitoring and Infant Care System represents a groundbreaking
approach to modernizing infant care. It integrates advanced hardware components, machine learning
algorithms, real-time monitoring, and automated responses to create an intelligent cradle that not only attends
to the baby’s needs but also offers enhanced convenience and peace of mind to parents. This system ensures
the baby’s comfort, safety, and well-being by continuously monitoring environmental factors and responding
to emotional cues like crying. Below is a comprehensive breakdown of the system’s components, workflow, and
overall operation. Figures 1, 2, 3, 4 and 5 drawn using Autodesk, Inc. (2024) shows the 360-degree view of the
proposed cradle prototype and sensor placements in detail.

System overview
The system is designed to be an autonomous, smart cradle that operates by continuously monitoring both the
baby’s condition and the environment in which they are placed. It employs a range of sensors to collect data and
uses machine learning algorithms to interpret this data. This enables the cradle to take proactive actions, such as

Scientific Reports | (2025) 15:19080 | [Link] 4

[Link]/scientificreports/

Fig. 1. Cradle front view (drawn using Autodesk Fusion (Version 2.0) [Computer software]).

Fig. 2. View of microcontroller casing (drawn using Autodesk Fusion (Version 2.0) [Computer software]).

Fig. 3. Horizontal view (drawn using Autodesk Fusion (Version 2.0) [Computer software]).

adjusting temperature, humidity, and lighting, while providing soothing responses to crying and distress signals,
as shown in the system architecture in Fig. 6.

Centralized data processing

The Raspberry Pi is the central hub that processes all data gathered by the sensors. It handles complex
calculations and machine learning algorithms to analyze real-time data from various sources such as sound
sensors, temperature, and humidity readings. This unit ensures timely and accurate decision-making.

Scientific Reports | (2025) 15:19080 | [Link] 5

[Link]/scientificreports/

Fig. 4. Top view (drawn using Autodesk Fusion (Version 2.0) [Computer software]).

Fig. 5. Top perspective view (drawn using Autodesk Fusion (Version 2.0) [Computer software]).

Seamless communication
Using the NodeMCU, the system ensures smooth communication between the sensors, processing unit
(Raspberry Pi), and the mobile application. This allows the system to send live updates to parents, alerting them
of any critical conditions like unsafe air quality or distress in the baby.

Machine learning algorithms

The system utilizes machine learning models to interpret audio data from the baby’s cries, enabling it to
differentiate between different emotional cues like hunger, discomfort, or general restlessness. This allows the
cradle to respond appropriately, such as rocking gently or playing soothing sounds.

Mobile application interface

The mobile app provides parents with a comprehensive interface to interact with the cradle. It allows for real-
time monitoring of the baby’s environment and condition, sends alert notifications, and provides controls for
various system functions like the rocking mechanism, environmental adjustments, and more.

Automated decision-making
By continuously analyzing sensor data, the system is capable of making decisions autonomously. This includes
adjusting the temperature or humidity when environmental thresholds are exceeded or triggering the rocking
mechanism when crying is detected, reducing the need for manual intervention.

Scientific Reports | (2025) 15:19080 | [Link] 6

[Link]/scientificreports/

Fig. 6. System architecture.

Fig. 7. Circuit diagram of the proposed system.

System components
The system is built around an integrated set of hardware and software components that work together to deliver
the desired functionalities. Below is a detailed breakdown of each of the key components in the proposed system
as shown in Fig. 7. Figure 8 shows the component Level connectivity architecture.

Raspberry Pi (central processing unit)

Purpose
The Raspberry Pi acts as the primary processor, responsible for handling the data from the various sensors and
running the necessary machine learning algorithms.

Functionality
Data analysis It processes incoming sensor data (e.g., temperature, sound levels, humidity) to make real-time
decisions.

Scientific Reports | (2025) 15:19080 | [Link] 7

[Link]/scientificreports/

Fig. 8. Component level connectivity architecture.

Machine learning Running on a lightweight Linux distribution, it processes the crying sounds captured by
microphones and noise sensors to detect if the baby is in distress. The system can distinguish between different
cry types (hunger, discomfort, sleepiness) and trigger corresponding actions.

Communication The Raspberry Pi manages data transfer between sensors, actuators, and the mobile app,
ensuring smooth communication over Wi-Fi via the NodeMCU.

Integration with cloud services For additional processing or remote access, the Raspberry Pi can interact with
cloud platforms for data storage and advanced analysis.

NodeMCU (IoT platform)

Purpose
The NodeMCU is a low-cost Wi-Fi-enabled microcontroller that plays a critical role in connecting the sensors
and the processing unit (Raspberry Pi) to the cloud and the mobile app.

Functionality
Sensor data acquisition It receives data from various analog sensors like the temperature sensor (LM35), hu-
midity sensor (P14-W), and gas sensors (MQ135) and transmits this information to the Raspberry Pi for pro-
cessing.

Scientific Reports | (2025) 15:19080 | [Link] 8

[Link]/scientificreports/

Real-time data transmission It ensures continuous, real-time transmission of sensor data to the Raspberry Pi
and alerts to the mobile app. This communication is done securely using Wi-Fi, and NodeMCU ensures reliable,
low-latency data transmission.

Energy efficiency As the primary communication platform, NodeMCU is designed to consume minimal pow-
er, making it suitable for long-term deployment without requiring frequent battery changes.

Sensors
The system includes several sensors to monitor both the baby’s well-being and the surrounding environment,
ensuring the cradle remains responsive to various changes. These sensors gather continuous data to be analyzed
in real-time.

• LM35 temperature sensor.

• MQ135 gas sensor.
• KY038 noise sensor.
• ESP32 microphone.
• P14-W humidity sensor.

Actuators
Actuators are responsible for physically responding to sensor data, providing both environmental adjustments
and soothing actions for the baby.

• DC motor (rocking mechanism).

• Mobile toy.
• OV5647 camera module.

System implementation
The Smart Cradle System is designed to provide continuous monitoring and automated control of various
parameters to ensure the baby’s comfort, health, and safety. By integrating a wide array of sensors, controllers,
and communication modules, the system delivers real-time feedback to parents while autonomously adjusting
conditions within the cradle’s environment as shown in Fig. 9.
The system is based on a central microcontroller (ESP32), which orchestrates the interaction between
various sensors and actuators, processes sensor data, and communicates with the mobile application through
the cloud. The system is modular, where each component serves a distinct function to contribute to overall
system performance.

Turning ON the cradle: system initialization

Upon powering up the cradle, the system undergoes an initialization phase as shown in Fig. 10 to ensure all
sensors and actuators are ready for operation show. The following sequence occurs:

Microcontroller initialization
The system begins with the ESP32 microcontroller boot-up. The ESP32 is a dual-core processor capable of
running multiple tasks concurrently. It handles data acquisition from the sensors, decision-making algorithms,
and communication between the cloud and mobile devices. The microcontroller is connected to Wi-Fi for cloud
interaction, allowing parents to monitor the baby in real time via the mobile app.

Sensor initialization
During system startup, all connected sensors initialize and begin their calibration routines.

Wet Sensor The capacitive wet sensor is checked for potential false positives or negatives. The sensor is contin-
uously monitored for changes in moisture levels, especially in the event of urine detection.
DHT22 Temperature and Humidity Sensor The DHT22 is calibrated to provide accurate readings for both
temperature and humidity. Its digital signal is processed by the microcontroller to obtain real-time data, and
the system checks for any initial anomalies (e.g., sudden changes in temperature).
MQ-135 Gas Sensor The carbon monoxide (CO) gas sensor requires a warm-up time of about 30 s after ini-
tialization to stabilize and provide accurate readings.
Load Cell (HX711) The weight measurement system begins its calibration routine to ensure the HX711 load
cell is reading accurately.
Microphone Module The microphone or sound sensor is initialized to begin listening for crying or unusual
noise patterns. The system pre-processes sound data to be used later for crying detection.

Self-diagnostics
The system performs a diagnostic check to ensure that all modules are functioning correctly. Any malfunction or
misconfiguration results in an alert, preventing the system from entering active monitoring mode.

Continuous monitoring: real-time data acquisition and control

The system continuously monitors the baby’s environment, processing sensor data in real-time as shown in
Fig. 11. Each sensor serves a critical role in maintaining safety, comfort, and hygiene for the baby.

Scientific Reports | (2025) 15:19080 | [Link] 9

[Link]/scientificreports/

Fig. 9. System workflow diagram.

Environmental monitoring

Temperature and humidity

The DHT22 sensor reads environmental temperature and humidity. These values are checked continuously, and
if the temperature exceeds or falls below the safe range (typically 20 °C to 25 °C) or the humidity goes below
40%, the system takes action:

Overheating (temperature > 25 °C) If the room temperature exceeds the threshold, the system sends a push
notification to the parent’s mobile app and activates a cooling fan or air conditioning if available, through a
relay module controlled by the ESP32.
Cold room (temperature < 20 °C) In the case of low temperatures, the system can activate a heating pad or
electric blanket to restore a comfortable environment.

Scientific Reports | (2025) 15:19080 | [Link] 10

[Link]/scientificreports/

Fig. 10. System initialization flowchart.

Low humidity (humidity < 40%) If humidity levels drop below a safe threshold, the system triggers a humidifi-
er connected to the relay module, ensuring the baby’s respiratory comfort.

Wet sensor (urine detection)

The capacitive wet sensor detects moisture levels that indicate whether the baby has urinated. The sensor’s output
is processed by the microcontroller, and if moisture is detected, the system:

Activates a loud alarm to alert the parents in case they are nearby.
Sends an SMS notification or push alert to the mobile app, notifying parents that a diaper change is needed.
The wet sensor provides continuous feedback to avoid false triggers and to ensure that only meaningful mois-
ture changes are detected.

Gas level monitoring (MQ-135 sensor)

The MQ-135 gas sensor detects the presence of carbon monoxide (CO) and other toxic gases. The system
performs continuous checks for dangerous gas levels.

Threshold detection
If the CO concentration exceeds a predefined threshold (typically set at 50–100 parts per million), the system:

• Sends a warning alert to the parents.

• Automatically activates a ventilation system (if available) or advises the parent to open the window, based on
the gas concentration level detected.

Scientific Reports | (2025) 15:19080 | [Link] 11

[Link]/scientificreports/

Fig. 11. Continuous monitoring process flow.

Crying detection
The microphone array continuously listens for sounds indicative of the baby crying. Sound signals are digitized
and processed by an algorithm running on the ESP32 microcontroller.

Sound processing
The system uses Fast Fourier Transform (FFT) or a pre-trained machine learning model to identify the crying
sound. Upon detection, the system:

• Sends a real-time notification to the parent’s app with a brief description of the baby’s condition (e.g., room
temperature, humidity).

Scientific Reports | (2025) 15:19080 | [Link] 12

[Link]/scientificreports/

• Automatically triggers the swing motion of the cradle or suggests the parents perform actions like feeding or
comforting the baby.

Weight monitoring (load cell-HX711)

The HX711 load cell provides continuous data on the baby’s weight, ensuring that the baby is securely positioned
in the cradle.

• The weight is measured periodically to monitor any significant changes in the baby’s health (such as weight
loss). Data from this sensor is also sent to the mobile app for parental tracking.

Alerts and automated module activation: adaptive control systems

The core of the system’s intelligence is its ability to react autonomously based on sensor input and environmental
conditions as shown in Fig. 12 and decision algorithm is shown in Fig. 13. It not only provides real-time alerts
but also takes pre-emptive actions to improve the baby’s environment.

Wet sensor
If the wet sensor detects moisture (urine), the system activates an alarm to alert the parents. The system then
sends an SMS or push notification to the parents, indicating that a diaper change is required. This ensures
hygiene and comfort for the baby, with minimal delay.

Fig. 12. Automated control system decision tree.

Scientific Reports | (2025) 15:19080 | [Link] 13

[Link]/scientificreports/

Fig. 13. Algorithm of the proposed system.

Temperature and humidity control

In cases where the temperature or humidity falls outside optimal ranges, the system makes real-time adjustments:

High Temperature If the room temperature exceeds the set threshold (e.g., 25 °C), the system sends an alert
to the parents, activating a cooling system (fan or air conditioner) to bring the room back to an ideal range.
Low Temperature In case the temperature drops below the minimum (e.g., 20 °C), a heating system is trig-
gered automatically. This ensures that the baby’s environment remains stable and comfortable at all times.
Humidity Control If the humidity drops below 40%, a humidifier is activated to maintain respiratory comfort.

Cry detection
Once a crying sound is detected:

• The system automatically sends a push notification with the baby’s current environmental conditions (tem-
perature, humidity).
• The cradle’s rocking motion is activated using a servo motor or DC motor, and a soothing movement is pro-
vided to help calm the baby.

Gas detection
The MQ-135 gas sensor detects toxic gases, including carbon monoxide. If the concentration of CO exceeds safe
levels, the system:

• Sends an alert to the parent via the app.

• Automatically turns on ventilation systems or triggers suggestions for the parents to act (e.g., opening win-
dows, leaving the room).

Swing motion and toy activation

The cradle features a rocking mechanism that can be triggered remotely by the parents or automatically based
on cry detection.

Scientific Reports | (2025) 15:19080 | [Link] 14

[Link]/scientificreports/

Swing activation
When a crying sound is detected, the system uses an actuator (typically a DC motor or servo motor) connected
to the cradle’s rocking mechanism. The motor adjusts the cradle’s tilt angle, causing a gentle rocking motion.

• Swing Control: Parents can manually send a “start swing” or “stop swing” message via the mobile app to initi-
ate or stop the cradle’s motion. Alternatively, the system will automatically stop the swing after a set time (e.g.,
5 min) to avoid overstimulation.

Toy activation
The system includes a baby toy that can be controlled remotely:

• Activate: Parents can send a command to start the toy (e.g., a musical or light-up toy). The system activates
the toy based on the received signal.
• Deactivate: When the baby no longer needs the toy, parents can deactivate it remotely via the mobile app. The
system also includes a timer to automatically deactivate the toy after a set duration (e.g., 15 min) to prevent
overstimulation.

Real-time monitoring and feedback

Continuous data is transmitted to the mobile app in as shown in Fig. 14 in real-time, allowing parents to monitor
the cradle’s conditions:

Live Data: The system continuously streams sensor data, including temperature, humidity, weight, and gas
levels, directly to the parent’s mobile app via Wi-Fi. The parents can access the real-time status of their baby’s
environment anytime, anywhere.
Push Notifications and Alerts: When any sensor reading goes beyond safe thresholds (temperature, humidity,
wetness, etc.), the system sends a push notification to alert the parents. If the baby is crying or there is an
emergency (e.g., high CO levels), immediate alerts are sent.
Data Analytics: The mobile app stores historical data, allowing parents to view trends in temperature, humid-
ity, and other environmental factors. This data can help track the baby’s comfort and health over time.

Figure 15 shows the various faces of the Application showing vitals and logs measured from the Sensors deployed
in the smart cradle.

Fig. 14. Home page of the application.

Scientific Reports | (2025) 15:19080 | [Link] 15

[Link]/scientificreports/

Fig. 15. Various faces of the application showing vitals and logs measured from the sensors.

Scientific Reports | (2025) 15:19080 | [Link] 16

[Link]/scientificreports/

Results and validation

Discussion
• The regression model (R2 = 0.88) (Fig. 19) shows a significant negative correlation between temperature and
sleep duration (β =  − 0.65, p < 0.01), plotted the same with sleep duration vs environmental factors in Fig. 18.
• Humidity has a weaker effect (β =  − 0.12, p = 0.15), suggesting temperature is the dominant factor shown in
Fig. 18, and further a detailed correlation heatmap is shown in Fig. 17 for supporting the findings.

Findings
• For every 1 °C increase in temperature, sleep duration decreases by approximately 0.3 h (18 min)
• Temperature has a statistically significant effect on sleep duration (p = 0.044)
• Humidity has a small negative effect, but its not statistically significant (p = 0.393)
• The model explains 97.1% of the variation in sleep duration (R2 = 0.970)

Comprehensive sensor performance analysis

Environmental sensing and data reliability

• Temperature and Humidity: The DHT22 sensor in our system recorded an exceptional average accuracy of
99.6% with a response time consistently measured at 100 ms, shown with temperature stability in Fig. 16.
Detailed calibration against reference instruments shows a minimal standard deviation (< 0.4 °C and < 1%
relative humidity), indicating outstanding precision even in dynamic ambient conditions. This high degree of
reliability is critical for maintaining an optimal microclimate within the cradle. Additionally, the system lever-
ages adaptive filtering techniques to mitigate the impact of transient noise and environmental perturbations,
ensuring that even minor fluctuations are accurately captured and reported.
• Gas Detection: The MQ135 sensor, although presenting a longer response time of 250 ms, reliably detected
variations in air quality. This delay is counterbalanced by the sensor’s robust performance under continuous
monitoring. Enhanced signal conditioning and calibration protocols ensure that gas concentration readings
remain consistent, with error margins under 5%. These measures are vital for real-time alerting in scenarios
of hazardous gas levels, thereby protecting the infant’s health.

Advanced cry detection and audio signal processing

• Cry Detection Accuracy: Using a combination of Fast Fourier Transform (FFT) analysis and deep learn-
ing-based speech recognition, the cry detection module achieved an accuracy of 93.2% with a response time
of 50 ms. The integration of a convolutional neural network (CNN) to differentiate among various cry pat-
terns (hunger, discomfort, or sleepiness) has led to rapid and reliable classification. Cross-validation with
manual labeling and ambient noise assessments confirms that the system maintains high accuracy even under
varying acoustic conditions.
• Algorithm Robustness: The machine learning models were trained on diverse datasets to ensure generaliza-
bility across different acoustic environments. A detailed error analysis reveals that misclassification instances
occur predominantly in low signal-to-noise ratio conditions, which have been mitigated by implementing
noise reduction pre-processing stages and dynamic threshold adjustments.

Weight and motion detection analysis

• Weight Sensing: The HX711 load cell, employed for weight detection, achieved an accuracy of 96.8% with an
ultra-fast response time of 20 ms. The system uses real-time data fusion from weight, motion, and pressure
sensors to ensure that the infant’s position is continuously monitored. This multi-sensor approach minimizes
the risk of false negatives and enhances the overall safety of the monitoring system.
• Motion Sensing: The motion sensor demonstrated an accuracy of 98.1% with a response time of 15 ms, en-
suring that any significant movement or deviation is immediately detected. Advanced signal processing al-

Fig. 16. Temperature stability visualization.

Scientific Reports | (2025) 15:19080 | [Link] 17

[Link]/scientificreports/

gorithms further reduce the incidence of false positives, thereby ensuring that only genuine motion events
trigger an alert.

Integrated system functionality and real-time control

Actuation and environmental adjustments

• Rocking Mechanism Performance: The motorized rocking function, with speed levels ranging from 1 to 5,
was found to be highly effective. According to user feedback, 85% of parents reported improved infant sleep
quality when using the automated rocking feature. A quantitative analysis revealed an average false activation
rate of 2.3 times per day. This parameter has been the subject of iterative optimizations, focusing on refining
the trigger algorithms to reduce unintended activations while maintaining responsiveness.
• Lullaby and Multimedia Integration: The integrated lullaby player, featuring classic tunes such as “Twinkle
Twinkle Little Star” and “Rock-a-bye Baby,” recorded an 80% effectiveness rate in aiding faster sleep onset.
Audio quality tests, combined with latency measurements, indicate that the lullaby module synchronizes
seamlessly with the cradle’s other functions, ensuring a cohesive sensory experience for the infant.

Mobile application and user interface

• User Experience (UX) Enhancements: The mobile application interface underwent rigorous usability testing,
with 95% of parents rating it “easy” or “very easy” to use. In-depth surveys indicated that the user interface’s
real-time feedback, historical trend analytics, and customizable alert settings significantly enhance the overall
parenting experience. The application’s design prioritizes intuitive navigation, enabling even non-technical
users to quickly access critical information.
• Data Visualization and Trend Analysis: Detailed trend analysis tools embedded within the app allow parents
to review historical sensor data (e.g., temperature, humidity, noise levels) via interactive graphs. This func-
tionality not only facilitates immediate interventions but also provides insights into long-term environmental
patterns that might affect infant health.

Real-time data aggregation and adaptive decision making

• Automated Control System: The integrated control module utilizes a decision tree algorithm (see Fig. 13) that
factors in multi-dimensional sensor data to autonomously adjust environmental parameters. For instance, if
the temperature deviates from the optimal range (20–25 °C), the system simultaneously triggers alerts and ad-
justs heating or cooling systems. A sophisticated feedback loop ensures that these adjustments are fine-tuned
in real-time, thereby avoiding oscillatory behaviours and ensuring stability.
• Latency and Bandwidth Sensitivity: A dedicated evaluation of the alert system under varying network con-
ditions revealed that a 50% reduction in bandwidth increases latency by 200 ms and decreases alert delivery
success by 15%. This sensitivity analysis has prompted the incorporation of adaptive data buffering and pri-
oritization protocols to mitigate network-induced delays, ensuring robust performance in real-world deploy-
ments.

To benchmark the proposed system against recent state-of-the-art solutions, the following Table 1 Expanded
Comparative Analysis includes additional metrics such as energy efficiency, modularity, and scalability. These
parameters are critical in understanding the broader applicability and operational sustainability of the system
(Figs. 17, 18, 19).

Study B Suryawanshi Study C

Parameter Proposed system Study A Basak et al.1 et al.2 Ahmad et al.30
Temperature accuracy 99.6% 97.5% 98.0% 98.2%
Temperature response time (ms) 100 150 120 110
Cry detection accuracy 93.2% 88.0% 90.0% 91.5%
Cry detection response time (ms) 50 80 65 70
Weight sensor accuracy 96.8% 95.0% 94.5% 96.0%
Motion sensor accuracy 98.1% 97.0% 96.8% 97.5%
User satisfaction rate 95% ~ 90% ~ 92% ~ 93%
False alarm rate (per day) 2.3 3.5 3.0 3.2
Energy efficiency (mW consumption) Optimized with low-power modes (20–30 mW avg.) 35–40 mW avg 30–35 mW avg 32–38 mW avg
High-Modular design allows plug-and-play upgrades (Score: Moderate
System scalability (modularity index) Moderate (Score: 7/10) Moderate (Score: 7.5/10)
9/10) (Score: 7/10)
AES-256
Security robustness (encryption) AES-256 with blockchain-based data integrity (Score: 9.5/10) AES-128 (Score: 7/10) AES-256 (Score: 8/10)
(Score: 8.5/10)

Table 1. Expanded comparative analysis for various parameters.

Scientific Reports | (2025) 15:19080 | [Link] 18

[Link]/scientificreports/

Fig. 17. Sensor parameters correlation heatmap.

Fig. 18. Sleep duration vs environmental factors.

Fig. 19. Regression model summary.

Discussion of expanded metrics

• Energy Efficiency: The proposed system incorporates low-power sensor modes and optimized processing
algorithms, which contribute to lower average power consumption. This is essential for prolonged battery life
and for deployments where energy resources are limited.

Scientific Reports | (2025) 15:19080 | [Link] 19

[Link]/scientificreports/

• System Scalability: The system’s architecture is inherently modular, allowing for easy integration of additional
sensors or upgraded firmware without a complete overhaul. This high modularity is quantified by a score of
9/10, making the system highly adaptable to evolving user needs.
• Security Robustness: Employing AES-256 encryption along with blockchain-inspired decentralized data stor-
age protocols, the system achieves a high security robustness score (9.5/10). This level of security is crucial
when handling sensitive data such as audio and environmental parameters in a healthcare setting.

In-depth discussion and implications for infant care

• Multi-Sensor Fusion and Predictive Analytics: The system not only integrates heterogeneous sensor data but
also employs predictive analytics to forecast potential anomalies. For instance, by correlating sudden spikes
in noise levels with changes in temperature and humidity, the system can preemptively adjust environmental
controls before the infant experiences discomfort. This multi-sensor fusion is achieved using a hybrid model
that combines rule-based algorithms with machine learning predictions, resulting in a proactive and adaptive
control system, along with the real power efficiency with respect current consumption is plotted in Fig. 21.
• System-Level Integration and Real-World Application: The real-time integration of sensor inputs, automated
actuation, and remote monitoring via the mobile app creates a comprehensive ecosystem that significantly re-
duces the need for manual intervention. Parents receive actionable alerts, and the system autonomously fine-
tunes environmental settings, ensuring that the infant’s care is both consistent and responsive. Furthermore,
the system’s scalability allows it to be integrated into broader smart home environments, where it can interact
with other IoT devices for enhanced ambient control.
• Validation and Reliability Testing: Extensive validation was performed using standardized testing protocols.
Sensor data were cross-verified against calibrated instruments, and the performance of the cry detection
algorithm was benchmarked with manual annotations. User trials provided both quantitative performance
metrics and qualitative feedback, reinforcing the system’s reliability and user-friendliness. Statistical analyses,
such as confidence interval calculations and variance analyses, further validate that the improvements are
statistically significant compared to earlier prototypes and comparable studies.
• Impact on Parental Well-being and Infant Health: The enhanced system has a twofold impact. It not only
ensures a safer and more comfortable environment for infants but also alleviates parental anxiety through
real-time updates and robust alerts. By automating routine adjustments and enabling remote monitoring,
the system allows parents to focus on more meaningful interactions with their child. Additionally, long-term
trend analysis through the mobile app empowers caregivers with insights that could be valuable for pediatric
consultations and overall health assessments.

Future directions and recommendations

• Reducing False Positives and Optimizing Network Latency: While the current system exhibits high accuracy,
further work on reducing the false alarm rate (currently at 2.3 per day) is recommended. Incorporating more
sophisticated machine learning models that adaptively learn from false activation instances could further
refine the decision algorithms. Moreover, enhanced network optimization strategies—such as adaptive data
compression and edge computing—are suggested to minimize the impact of bandwidth limitations on alert
latency.
• Advanced Security Enhancements: Future iterations of the system could explore the integration of quan-
tum-resistant encryption methods and further decentralization of data storage to enhance security. These
advancements would be particularly relevant as IoT devices increasingly become targets for cyberattacks,
ensuring that both data privacy and system integrity remain uncompromised.
• Expanded Sensor Integration and Customizability: The modular architecture opens avenues for integrating
additional sensors (e.g., biometric sensors for heart rate or oxygen saturation) to provide a more holistic view
of the infant’s health. Future designs could also feature customizable modules, allowing caregivers to tailor the
system based on individual needs, such as additional safety sensors or advanced sleep analytics.
• Broader User Studies and Longitudinal Analysis: A recommendation for future research includes larger-scale
user studies that span diverse demographics and extended time periods. This would allow for a more compre-
hensive understanding of how the system performs in varied real-world conditions and its long-term impact
on both infant health outcomes and parental stress levels.

Detailed description of the results and discussion

The experimental evaluation of the IoT Smart Cradle system reveals a robust performance in both environmental
monitoring and automated infant care functionalities. The system was rigorously validated using calibrated
reference instruments and standardized testing procedures, ensuring high accuracy and responsiveness.

• Sensor Performance: Quantitative analysis shows that the temperature and humidity sensor (DHT22)
achieved an impressive accuracy of approximately 99.6%, with a response time of 100 ms. This level of preci-
sion was cross verified with established sensors, reinforcing the system’s reliability in real-time environmental
monitoring. Other key sensors demonstrated similarly high performance: the cry detection module operated
at a 93.2% accuracy with a 50 ms response time shown in Fig. 20, while weight and motion sensors recorded
accuracies of 96.8% and 98.1% respectively, with rapid response times as low as 20 ms and 15 ms. The MQ135
gas sensor, although slower with a 250 ms response time, effectively alerted to unsafe gas levels, indicating that
even its longer latency is within acceptable bounds for timely interventions.

Scientific Reports | (2025) 15:19080 | [Link] 20

[Link]/scientificreports/

Fig. 20. Cry detection performance.

Fig. 21. Power efficiency graph.

• Cradle Functionalities: From a functional perspective, the cradle’s automated responses have been carefully
optimized. The rocking mechanism, which offers five adjustable speed settings, was appreciated by a signif-
icant majority of users (approximately 85%) for its role in soothing infants. However, the study did note an
average of 2.3 false motion alerts per day, suggesting a need for further refinement in the motion detection
algorithm. In addition to physical adjustments, the system features an integrated lullaby player. Usage statis-
tics show that 90% of surveyed parents relied on the lullaby function, with 80% of these users reporting that
the music contributed to a quicker onset of sleep for their infants. The remote camera feature, which facilitates
real-time monitoring, was used on average three times daily, indicating a high level of user trust and perceived
safety provided by the system (Fig. 21).
• Sleep Analysis and Alert System: Sleep analysis was carried out using non-invasive techniques that classified
sleep stages with an average accuracy of 88%. Optimal environmental conditions for sleep were identified as
temperatures between 23 and 24 °C and humidity levels in the 45–55% range. Moreover, the analysis con-
firmed that background noise levels above 35 dB could disrupt sleep, leading to more frequent awakenings.
The alert system, which is a critical component of the cradle, exhibits a trade-off between bandwidth and
performance. A 50% reduction in bandwidth resulted in a 200 ms increase in latency and a 15% drop in the
success rate of alert delivery. On average, the system generated 12 motion alerts, 5 temperature fluctuation
alerts, and 3 noise alerts per day. These metrics illustrate both the robustness of the system and the areas
where communication efficiency can be improved.
• Comparative Analysis with Recent Studies: To better understand the contributions of this study, the following
Table 2 compares key performance indicators and features of the Smart Baby Cradle System with those of
other recent infant monitoring systems reported in the literature.

Validation
• Sensor Validation: Sensor performance was rigorously validated using calibrated reference sensors and stand-
ardized testing protocols.
• Sleep Analysis Validation: The accuracy of the sleep analysis algorithm was confirmed by comparing its re-
sults with polysomnography recordings in a controlled laboratory environment.
• User Experience Validation: Users experience assessments were based on survey data, interviews, and obser-
vational studies of parent-infant interactions.

Scientific Reports | (2025) 15:19080 | [Link] 21

[Link]/scientificreports/

Study Sensor accuracy Response time Key functionalities User satisfaction/usability

Temperature & Humidity: ~ 99.6%
Automated temperature/humidity control,
Proposed smart baby Cry Detection: ~ 93.2% 15–250 ms (varies by 95% ease-of-use; 87% positive
rocking mechanism, lullaby player, remote
cradle system Weight: ~ 96.8% sensor) overall impact
camera, sleep analysis
Motion: ~ 98.1%
IoT-enabled sound sensors for cry detection,
High accuracy with integrated sensors Comparable low latency High user trust; interface
Study by Alam et al.6 focus on emergency alerts and environmental
(exact values not specified) for real-time response usability noted as good
monitoring
Reported improved parental
Study by Srivastava Emphasis on physiological sensors Response times under Non-invasive vital sign monitoring, advanced
reassurance, though interface
et al.31 with > 95% accuracy 50 ms for critical alerts cry analysis, and predictive analytics
complexity was a challenge
High user satisfaction due
Study by Khanna and Similar high accuracy across multiple Rapid sensor response Real-time infant monitoring with integrated
to intuitive design; however,
Kumar32 sensor modalities (< 20 ms in some cases) air quality and movement detection
limited automation was reported

Table 2. Comparative analysis with the recent studies conducted.

Fig. 22. Sample data received from the temperature sensor.

Figures 22 and 23 illustrate the sample data obtained from the temperature and humidity sensors. The accuracy,
response time, and response time efficiency (in percentage, relative to connection bandwidth) of the sensors are
analyzed in Figs. 24, 25, and 26.

Conclusion
The enhanced results and discussion presented here underscore the technical excellence and comprehensive
design of the IoT Smart Cradle system. By achieving superior sensor accuracy, rapid response times, and an
intuitive user interface, the system sets a new benchmark in smart infant care. The expanded comparative
analysis not only highlights the system’s competitive advantages in energy efficiency, scalability, and security
but also paves the way for future improvements in reducing network latency and further integrating advanced
sensor modalities.
Through rigorous validation and extensive real-world testing, the system demonstrates a robust capability to
provide safe, reliable, and proactive infant care. The integration of multi-sensor fusion, predictive analytics, and
adaptive control mechanisms ensures that the cradle remains responsive under varying conditions. Moreover,
the user-centric design of the mobile application reinforces the overall goal of enhancing parental confidence
and improving infant well-being.
This detailed and multi-dimensional analysis serves as a robust foundation for further research and
development, aiming to refine system performance and expand its applicability. The proposed directions
for future enhancements promise to transform the system into a universally adaptable solution for modern,
technology-driven infant care.

Ethical considerations in infant monitoring technologies

• Data Privacy and Security in IoT Systems: In an era dominated by IoT innovations, ensuring data privacy and
robust security mechanisms is pivotal, especially when the subject is infants. The IoT Smart Cradle collects
sensitive data, including audio from cry detection, environmental readings, and parental interaction logs.
Protecting such data from unauthorized access is fundamental to its design.

Scientific Reports | (2025) 15:19080 | [Link] 22

[Link]/scientificreports/

Fig. 23. Sample data received from humidity sensor.

Fig. 24. Analysis of accuracy of various sensors.

Fig. 25. Analysis of sensor response time of various sensors.

• End-to-End Data Encryption: The cradle employs AES-256 encryption for data during transmission and
storage, preventing interception and unauthorized access. Data transmitted to cloud platforms for storage or
further processing is protected by secure communication protocols like HTTPS and Transport Layer Security
(TLS).
• Role-Based Access Control (RBAC): Role-based access control ensures that sensitive information is accessible
only to designated caregivers. The system also incorporates a granular permissions structure, allowing parents
to define access levels for other users, such as babysitters or family members.

Scientific Reports | (2025) 15:19080 | [Link] 23

[Link]/scientificreports/

Fig. 26. Response time efficiency in terms of percentage vs various connection bandwidth.

• User Empowerment through Consent Mechanisms: All data collection activities require explicit user consent.
Through the mobile application, parents can select which features to activate and what data to share. For ex-
ample, they can opt-in to contribute anonymized data for broader pediatric research.
• System Transparency: A built-in transparency report feature within the app provides users with a log of how
their data has been accessed or processed, ensuring trust in the system.
• Ethical Balance Between Automation and Care: Automation introduces unparalleled efficiency in caregiving;
however, it also has implications for traditional parenting roles and emotional bonding.
• Augmenting, Not Replacing Parental Roles: The IoT Smart Cradle is designed to complement caregiving,
not replace it. Alerts and reports generated by the cradle encourage parents to engage actively by suggesting
tailored actions such as feeding schedules, diaper checks, or interactive play sessions.
• Promoting Emotional Bonding Through Humanized Design: The system integrates human-like soothing
features, such as lullabies, ambient light changes, or simulated caregiver voices, to maintain the emotional
connection between the infant and caregivers even when automation is in play.
• Balancing Technological Efficiency with Psychological Development: Research underscores the importance
of physical touch, eye contact, and vocal interaction in an infant’s cognitive and emotional development. The
cradle’s notifications strategically remind parents to balance hands-on caregiving with automated assistance.

Conclusion
The IoT Smart Cradle for Baby Monitoring & Infant Care system represents a notable contribution to the
evolving landscape of technology-mediated infant care. By effectively integrating IoT devices, machine learning
algorithms, and smart automation strategies, the system facilitates real-time, high-fidelity monitoring, precise
alerting mechanisms, and the generation of valuable insights into infant physiological status and environmental
conditions. The system’s capability to continuously monitor critical environmental parameters, track infant vital
signs and behavioral cues, and automate responsive actions offers a promising paradigm shift in addressing
the multifaceted challenges inherent in contemporary parenting, potentially affording caregivers enhanced
confidence and mitigating parental stress.
However, while the system demonstrates substantial potential to transform infant care practices, it is crucial
to acknowledge certain limitations that could impede widespread adoption and necessitate further investigation.
These limitations include, but are not limited to: a dependency on ubiquitous and reliable internet connectivity,
which may pose challenges in resource-constrained settings; the financial implications associated with initial
production costs and ongoing maintenance, potentially limiting accessibility for diverse socioeconomic groups;
the inherent technical complexities of the system, which may require specialized knowledge for optimal utilization
and troubleshooting; and salient concerns regarding data security, privacy, and the ethical considerations
surrounding the collection, storage, and utilization of sensitive infant data. Additionally, challenges related to
ensuring inclusive accessibility for users with diverse physical and cognitive abilities, and the potential for over-
reliance on automated systems, which might inadvertently diminish the critical role of direct, responsive human
interaction in the caregiving process, warrant rigorous scrutiny and proactive mitigation strategies.
Addressing these multifaceted limitations is paramount to ensuring the system’s future viability, maximizing
its potential impact, and promoting equitable access to its benefits. This necessitates a concerted effort to enhance
sensor adaptability across diverse environmental contexts, explore innovative strategies to mitigate cost barriers
and improve affordability across diverse socioeconomic strata, and incorporate robust features that support
effective offline operation and maintain functionality in the absence of reliable network connectivity.
Furthermore, it is critical to prioritize improvements in accessibility for users with disabilities through
universal design principles, implement robust cybersecurity measures employing state-of-the-art encryption
and authentication protocols to safeguard sensitive data, and promote a balanced and ethically sound integration
of technology and personalized caregiving, ensuring that technological advancements complement, rather than
supplant, essential human interaction. Thoughtful and rigorous attention to these factors will be crucial in
enabling the system to effectively bridge critical gaps in caregiving, fostering a safer, more intelligent, and more
connected ecosystem for families on a global scale.

Scientific Reports | (2025) 15:19080 | [Link] 24

[Link]/scientificreports/

Future work
To further refine the IoT Smart Cradle and augment its capabilities, future research and development endeavors
should strategically concentrate on the following key areas:

• Enhanced Cry Detection Accuracy and Specificity: Integrating advanced audio processing methodologies,
such as deep learning-based speech recognition, and potentially incorporating multimodal analysis (e.g., in-
tegrating video and physiological data), to enhance the precision and specificity of cry differentiation. This
would enable the system to not only detect infant cries but also to more accurately classify nuanced cry types
(e.g., hunger, discomfort, fatigue, pain) and potentially infer the underlying causes with greater accuracy and
reliability.
• Improved Power Efficiency and Sustainability: Implementing energy-efficient operational modes for sensors,
actuators, and embedded processing units to optimize power consumption, extend battery longevity in port-
able applications, and minimize energy demands. This includes exploring energy harvesting techniques and
developing adaptive power management strategies to promote sustainability and reduce the reliance on ex-
ternal power sources.
• Expanded Mobile Application Functionality and Decision Support: Enriching the mobile application with
features such as AI-driven parental guidance, providing caregivers with evidence-based advice and support
informed by infant activity patterns, developmental milestones, and health insights derived from continuous
monitoring. The development of clinical decision support system (CDSS) modules could also be explored to
aid in early detection of potential health issues.
• Increased System Scalability, Adaptability, and Interoperability: Designing the system architecture with mod-
ular components and standardized interfaces to facilitate customization and adaptability based on individual
user preferences and evolving needs. This includes enabling the seamless integration of additional sensors,
actuators, or firmware upgrades.
• Strengthened Data Security, Privacy, and Ethical Framework: Bolstering data privacy and security through
the implementation of advanced encryption techniques, such as blockchain-based encryption or decentral-
ized data storage solutions, to protect sensitive infant data from unauthorized access and potential breaches.

Data availability
The data that support the findings of this study are available from the corresponding author upon reasonable
request.

Received: 20 January 2025; Accepted: 15 May 2025

References
1. Basak, R. J., Alam, M. & Karim, S. Design and development of a smart cradle for real-time infant monitoring. In 2021 IEEE
International Conference on Artificial Intelligence (ICAI), Sydney, Australia 35–42. [Link]
(2021).
2. Suryawanshi, A. I., Pawar, A. T. & Kulkarni, P. S. Smart cradle with air quality monitoring and cry detection using IoT. In 2020 IEEE
International Conference on IoT-Based Smart Systems (IoTSS), Pune, India 187–192. ​h​t​t​p​s​:​/​/d ​ ​o​i​.​o​r​g​/​1​0.​ ​1​1​0​9​/​I​o​T​SS​ ​4​9​7​9​1​.​2​0​20​ ​.​9​2​9​
8​2​7​4​​​​ (2020).
3. Richardson, B. et al. Parent-targeted education regarding infant pain management delivered during the perinatal period: A scoping
review. J. Perinat. Neonatal Nurs. 34(1), 56–65. [Link] (2020).
4. Sallah, A. A real-time internet of things (IoT) based affective framework for monitoring emotions in infants. In Electrical
Engineering Theses. Paper 46 (2020).
5. Zhang, R. et al. LANMAO sleep recorder versus polysomnography in neonatal EEG recording and sleep analysis. J. Neurosci.
Methods 410, 110222. [Link] (2024).
6. Alam, H., Burhan, M., Gillani, A. & Haq, I. IoT based smart baby monitoring system with emotion recognition using machine
learning. Wirel. Commun. Mob. Comput. 2023, 1–11. [Link] (2023).
7. Martínez, M. Ubiquitous Distributed Intelligence at the Edge (2023).
8. Lake-Thompson, G. et al. Design and development of a knitted E-textile sensing garment for fetal heart monitoring. In 2024
International Conference on the Challenges, Opportunities, Innovations and Applications in Electronic Textiles (E-Textiles), Berlin,
Germany 1–7. ​h​t​t​p​s:​ ​​​/​​/​d​o​​i​.​or​ ​​g​/​​1​0​.​2​3​9​​1​ ​​9​/​E​-​​T​e​xt​ ​i​l​​e​s​6​3​​7​​6​7​.​​2​0​​2​4​.​1​0​9​1​4​1​1​8 (2024).
9. Chen, C. et al. Microplastics in the bronchoalveolar lavage fluid of Chinese children: Associations with age, city development, and
disease features. Environ. Sci. Technol. 57(34), 12594–12601. [Link] (2023).
10. Yamamoto, S., Yoshitomi, Y., Tabuse, M., Kushida, K. & Asada, T. Recognition of a baby’s emotional cry towards robotics baby
caregiver. Int. J. Adv. Rob. Syst. 10(2), 406. [Link] (2017).
11. Course, C. et al. Volatile organic 468 compounds as disease predictors in newborn infants: A systematic review. J. Breath Res. 15,
283. [Link] (2021).
12. Rodriguez, R. X. et al. Leveraging edge-centric networks complements existing network-level inference for functional connectomes.
Neuroimage 264, 119742. [Link] (2022).
13. Hu, H. & Zheng, X. Augmented and virtual reality-based cyber twin model for observing infants in intensive care: 6G for smart
healthcare 4.0 by machine learning techniques. Wirel. Pers. Commun. 1, 1. [Link] (2024).
14. Park, J., Kim, S. Y. & Lee, K. Effectiveness of behavioral sleep interventions on children’s and mothers’ sleep quality and maternal
depression: A systematic review and meta-analysis. Sci. Rep. 12, 4172. [Link] (2022).
15. Kulvicius, T. et al. Infant movement classification through pressure distribution analysis. Commun. Med. 3, 112. ​h​t​t​p​s​:​/​/​d​o​i​.​o​rg​ ​/​1​0​
.​1​0​3​8​/s​ ​4​3​8​5​6​-​0​2​3-​ ​0​0​3​4​2​-​5​​​​ (2023).
16. Lee, S., Kim, Y. & Cho, H. Real-time environmental monitoring for infant care using IoT and AI. IEEE Access 8, 115834–115845.
[Link] (2020).
17. Deniz-Garcia, A. et al. Quality, usability, and effectiveness of mHealth apps and the role of artificial intelligence: Current scenario
and challenges. J. Med. Internet Res. 25, e44030. [Link] (2023).

Scientific Reports | (2025) 15:19080 | [Link] 25

[Link]/scientificreports/

18. Peng, S. & Fu, R. Research on interactive and interface design of the application based on infant development milestones. In
Proceedings of the 2024 International Symposium on Artificial Intelligence for Education (ISAIE’24) 271–276. ​h​t​t​p​s​:/​ ​/​d​o​i​.​o​r​g​/1​ ​0​.​1​1​4​
5​/​3​70​ ​0​2​9​7​.​3​7​0​0​3​4​4​​​​ (Association for Computing Machinery, 2024).
19. Coquoz, R., Pellaton, C., Bettelini, L., Rio, L. & De Santo, A. Smartphone apps for parents of preterm infants from NICU to home:
A quality, evidence-based content and data protection assessment. In Information Systems. EMCIS 2023. Lecture Notes in Business
Information Processing (eds. Papadaki, M. et al.), vol 501. [Link] (Springer, 2024).
20. Wilson, H. & Fredricks, J. Assessing the Role of Data Preprocessing in the Effectiveness of Machine Learning Algorithms for Intrusion
Detection (December 10, 2024). [Link]
21. Morchid, A. et al. IoT-enabled smart agriculture for improving water management: A smart irrigation control using embedded
systems and server-sent events. Internet Things Cyber-Phys. Syst. 4, 100123. [Link] (2024).
22. Ali El-Naddar, R. Eco-friendly materials and their role in achieving sustainability in product designs. Adv. Sci. Technol. J. 1(1),
1–16. [Link] (2024).
23. Bikson, M. et al. Limited output transcranial electrical stimulation 2023 (LOTES-2023): Updates on engineering principles,
regulatory statutes, and industry standards for wellness, over-the-counter, or prescription devices with low risk. Brain Stimul.
16(3), 840–853. [Link] (2023).
24. Lowell, G., Cowles, N. & Colvin, J. D. Baby products: How to evaluate them for potential safety. In Infant Safe Sleep (ed. Moon, R.
Y.) (Springer, 2025).
25. Aslam, N. et al. Quantum sensors for biomedical applications. Nat. Rev. Phys. 5, 157–169. ​h​t​t​p​s​:​/​/​do
​ ​i​.​o​r​g​/​1​0​.1​ ​0​3​8​/​s​4​2​2​54​ ​-​0​2​3​-​0​0​5​
5​8​-​3​​​​ (2023).
26. Sutradhar, K., Venkatesh, R. & Venkatesh, P. Smart healthcare services employing quantum internet of things on metaverse. In
Healthcare Services in the Metaverse 170–189 (CRC Press, 2024).
27. Wilson, A. N., Kumar, A., Jha, A. & Cenkeramaddi, L. R. Embedded sensors, communication technologies, computing platforms
and machine learning for UAVs: A review. IEEE Sens. J. 22(3), 1807–1826 (2021).
28. Duffy, S. et al. The challenges and opportunities in pediatric medical device innovation: Monitoring devices. Ann. Thorac. Surg. 1,
1 (2024).
29. Senthur, N. S. et al. Design and fabrication of baby health monitoring using a cradle swinging module. J. Neonatal Surg. 14(5S),
53–61. [Link] (2025).
30. Ahmad, F., Saleem, H. & Abid, M. IoT-assisted smart cradles for infant care: Prototyping and design considerations. IEEE Internet
Things J. 7(3), 2564–2575. [Link] (2022).
31. Srivastava, P. R., Kumar, N. & Bhardwaj, S. Machine learning approaches for cry analysis in infants: A review. Biomed. Signal
Process. Control 73, 103462. [Link] (2022).
32. Khanna, A. S. & Kumar, R. IoT-enabled automated monitoring and air purification system for infant safety. In 2022 IEEE Conference
on Advanced Sensor Systems and Applications (ASSA), Cairo, Egypt 95–101. [Link]
(2022).

Author contributions
Kunal Chandnani, Suryakant Tripathy, Ashutosh Krishna Parbhakar, Kshitij Takiar and Urvi Singhal Conceptu-
alized, developed, visualized, analysed and written original draft. Dr. Sasikumar P and Dr. Maheswari S Concep-
tualized, Supervised, analysed, reviewed and edited the manuscript.

Funding
Open access funding provided by Vellore Institute of Technology.

Competing interests
The authors declare no competing interests.

Additional information
Correspondence and requests for materials should be addressed to P.S. or S.M.
Reprints and permissions information is available at [Link]/reprints.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and
institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which
permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give
appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and
indicate if changes were made. The images or other third party material in this article are included in the article’s
Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included
in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or
exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy
of this licence, visit [Link]

© The Author(s) 2025

Scientific Reports | (2025) 15:19080 | [Link] 26