Item #1002 212 025

Model #XD2473

USE AND CARE GUIDE

FULL MOTION TV WALL MOUNT

(FITS VESA 100/200/300/400)

Questions, problems, missing parts? Before returning to the store,

call Commercial Electric Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday

1-877-527-0313

[Link]

For additional support, call the manufacturer at 1-800-747-6558.

THANK YOU
We appreciate the trust and confidence you have placed in Commercial Electric through the purchase of this wall mount. We strive to
continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Commercial Electric!
Table of Contents
Safety Information 2 Pre-Installation 3

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warranty Installation 6
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Information
Before you begin, carefully read and understand the instructions in
this manual. Please follow the instructions in the order presented in CAUTION: Do not sit or stand on the product.
this manual and observe all warnings and cautions.
WARNING: Failure to provide adequate structural
strength for this component can result in physical CAUTION: Improper handling can result in cuts and
injury and/or damage to equipment. It is the installer’s lacerations.
responsibility to make sure the structure to which this
component is attached can support four times the combined
weight of all equipment. Reinforce the structure as required CAUTION: Improper installation may cause property
before installing the component. damage and/or personal injury, so the installation must be
done by two qualified contractors. The manufacturer is not
WARNING: This wall or ceiling mount is intended for liable for damage or injury caused by incorrect mounting,
use only with the maximum weights indicated. Use with assembly or use.
products heavier than the maximum weights indicated may
result in collapse of the mount and its accessories causing
possible injury. This mount has been tested to support
80 lbs. (36 kgs). Do not exceed this weight.

WARNING: Observe all safety measures at all times

during the installation of this product. Use proper safety
gear and tools during the installation process to prevent
physical injury.

CAUTION: Never allow children to climb on or play with

the product.

CAUTION: NEVER use this TV wall mount for DRYWALL This mount has been tested to support a television with a
installation. minimum of 20 in. (51 cm) and a maximum 56 in. (142 cm)
diagonal screen and a weight up to 80 lbs. (36 kgs).

Warranty
The manufacturer warrants that it will replace or repair this item, free of charge, at the manufacturer’s sole discretion, should it prove
defective in materials or workmanship.
This warranty does not apply to:
□ Normal wear and tear □ Improperly installing the bracket to the display
□
□
□ Friction damage □ Failure to properly follow installation instructions
□
□
□ Coating defects □ Modification or repairs not made or authorized by the manufacturer
□
□
□ Defects caused by loosened screws, nuts, or bolts □ Loading beyond permitted load
□
□
□ Improperly mounting the bracket to the wall □ Intentional misuse
□
□
Contact the Customer Service Team at 1-877-527-0313 or visit [Link].

2
Pre-Installation
ENSURING THIS IS THE CORRECT WALL MOUNT FOR YOU
IMPORTANT: Review this section carefully before you proceed with this installation to ensure that this is the correct TV
Wall Mount for you.

This TV Wall Mount is the correct wall mount for you if:
□□ Your TV size is equal to or no greater than 400 mm x 400 mm (16 in. x 16 in.).
□□ Your TV (including any accessories) weighs less than 80 lbs (36 kg).
If your TV is greater than these TV VESA measurements and weighs more than 80 lbs (36 kg), then this TV Wall Mount is NOT compatible
with your TV.
16 in. (400 mm) Max.

16 in. (400 mm) Max.

PLANNING INSTALLATION
Compare all parts in the package with the Hardware Included and Package Contents lists in this manual. If any part is missing or damaged,
do not install this wall mount system and call customer service at 1-877-527-0313 or visit [Link].
This wall mount bracket is compatible with VESA 100/200/300/400 mm mounting holes.

PLANNING WALL PLACEMENT

CAUTION: Ensure the wall you select is a weight-bearing wall. Failure to observe this precaution can result in serious physical
injury and/or property damage. Consult a professional installer or contact customer service if you have any questions.

When selecting a wall to mount your display, keep the following in mind:
□□ Select a place with easy access to power outlets, cable input sources, and connections for speakers and accessories.
□□ Avoid direct sunlight, heat, and vibrations and do not place in direct flow of traffic.
□□ Select a weight-bearing wall. The wall must be able to safely support four times the combined load of the equipment and all
attached hardware and components.

PLANNING MOUNTING HEIGHT

The optimal viewing height is to center the display at eye level when seated. Many people consider this to be too low for a wall mount, and
commonly use the following rule for placement:
□□ Position the bottom of the display no higher than eye level when seated, and the top of the display no higher than eye level when
standing. Anything within these limits should normally provide a comfortable viewing experience.

3 [Link]
Please contact 1-877-527-0313 for further assistance.
Pre-Installation
ENSURING WALL STABILITY
Carefully inspect the wall area you have selected. Examine the wall surface before you begin drilling.

WARNING: Do not drill near electrical wiring and water pipes.

CAUTION: Wood studs must be no smaller than 2 x 4 in. in size. Ensure the surface covering does not exceed 5/8 in.

CAUTION: Concrete walls must have a minimum thickness of 5.5 in. Ensure the surface covering does not exceed 3/8 in.

CAUTION: Do not install this product on a concrete block.

□□ For concrete walls, check for damaged or loose concrete and do not drill in those areas.
□□ For brick walls, never drill into the mortar between blocks.
□□ For wood studs, locate the wall studs and drill in the center of the stud.

TOOLS REQUIRED (NOT INCLUDED IN THE PACKAGING)

5-32 in. (4 mm)

wood drill bit or Phillips
Power drill Stud finder
3/8 in. (10 mm) screwdriver
masonry drill bits

Measuring
Pencil Hammer
tape

4
Pre-Installation (continued)
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.

NOTE: The hardware included is suitable for mounting to walls made of brick, solid concrete, or wood studs covered with drywall. If your
mounting situation is different, please consult a qualified installer or contact customer service at 1-877-527-0313 or visit
[Link]. For additional support, you can also call the manufacturer at 1-800-747-6558.

AA BB CC – FF GG – JJ KK LL

MM NN OO PP QQ RR

Part Description Quantity Part Description Quantity

AA Anchor 3 JJ M8x50 mm bolt 4
BB Lag bolt 3 KK M6/M8x22 mm spacer 4
CC M4x12 mm bolt 4 LL M4/M5x17 mm spacer 4
DD M5x12 mm bolt 4 MM M8x10 mm spacer 4
EE M6x12 mm bolt 4 NN M8x2.5 mm spacer 8
FF M8x25 mm bolt 4 OO M4/M5 washer 4
GG M4x30 mm bolt 4 PP M6/M8 washer 4
HH M5x30 mm bolt 4 QQ M6x8 mm bolt 8
II M6x35 mm bolt 4 RR 4 mm hex wrench 1

PACKAGE CONTENTS
A B

Part Description Quantity

A Wall plate unit 1
B Arm extender 4
C Bubble level 1

5 [Link]
Please contact 1-877-527-0313 for further assistance.
Installation

1 Identifying the bolt diameter to use

To ensure proper mounting of the brackets to your TV, this
2 Identifying the bolt length to use
□□ Insert a straw or toothpick into one of the mounting holes
mounting system includes several sizes of bolts (CC - JJ), washers on the back of your TV. If your TV is curved or recessed,
(OO and PP), and spacers (KK - NN) that can be used in various place the proper sized spacer (KK, LL, MM or NN) on top of
combinations. Combinations are determined by the back style of one of the mounting holes first.
the TV (flat, curved, or recessed) and the diameter and depth of □□ Use a pencil to mark the depth of the mounting hole.
those holes.
□□ Determine the proper bolt length to use by comparing the
□□ Select the bolt (CC - JJ) diameter to use by inserting the mark with the various bolts provided.
various sized bolts (CC - JJ) (M4, M5, M6, and M8) into the
mounting holes in the back of your TV. CAUTION: When the bolt is longer than the mark, choose
a shorter bolt.

M4 M5 M6 M8 FLAT
OR OR OR

CURVED

RECESSED

3 Separating the TV plate

□□ Use the wrench (RR) to remove the bolts (1) that hold the TV
4 Marking the mounting holes
□□ Use the holes in the wall plate unit (A) as a template to
plate on the wall plate unit (A). Save these bolts for later. mark the mounting hole locations for attaching the wall
plate unit (A) to the wall.
A □□ Use the bubble level (C) to ensure the mount will be level
before you drill holes.
A

RR

6
Installation (continued)

5 Drilling mounting holes in concrete/

brick wall 6 Drilling mounting holes in wood studs
If you are installing the mounting system into wood studs, proceed CAUTION: Avoid drilling near electrical wiring and water
to step 6. pipes. The mounting system must be attached to a weight
bearing wall and must be installed directly onto the center
CAUTION: Avoid drilling near electrical wiring and water of the wood studs. Failure to observe all safety precautions
pipes. The mounting system must be attached to a weight can result in serious physical injury and/or property
bearing wall. Failure to observe all safety precautions can damage. Consult a professional installer or call customer
result in serious physical injury and/or property damage. service if you have any questions.
Consult a professional installer or call customer service if
you have any questions. CAUTION: Wood studs must be no smaller than 2 x 4 in.
in size.
CAUTION: Do not drill into mortar between bricks or into
loose concrete.
□□ Use a commercially-available stud finder to locate the stud
centers in the wall. Studs are usually spaced 16 in. apart.
CAUTION: Never drill into hollow brick. □□ Use 5/32 in. (4 mm) wood drill bit to drill holes to a depth of
2.36 in. (6.00 cm).
□□ Use 3/8 in. masonry bits to drill mounting holes in the
concrete approximately 2.36 in. (6.00 cm) in depth.
□□ Insert nylon anchors (AA) into the pre-drilled holes. You
may have to use a hammer to gently tap the anchors fully
into the wall.

Wood
Drill Bit

Masonry
Drill Bit
AA

7 Attaching the mounting arm to the

wall A

□□ Align the mounting arm holes with the pre-drilled holes in BB

the wall. UP
□□ Attach the mounting arm (A) to the wall using lag bolts
(BB). Tighten the bolts (BB) securely using a Phillips
screwdriver and a socket tool (not included).

7 [Link]
Please contact 1-877-527-0313 for further assistance.
Installation (continued)

8 Attaching the brackets to the TV

(VESA 100 and 200)
A
CC/DD/EE/FF
OO/PP
NOTE: If the back of the TV is not flat, or the bolts are too
long, or there is interference between the TV bracket and NN
cable inlets, we strongly recommend the use of spacers.

□□ If necessary, align spacers (KK, LL, MM or NN) over the

mounting holes on the back of your TV.
□□ Position the wall plate (A) over the TV and attach using the
appropriately sized bolts (CC - JJ) and washers 100x100 / 200x200
(OO or PP).

CAUTION: Do not overtighten the bolts as this could A

damage your TV. GG/HH/II/JJ
KK/LL/MM/NN OO/PP

100x100 / 200x200

9 Attaching the mounting plate to the

TV (VESA 300 and 400)
B1

CAUTION: Use two or more people to complete this step. QQ B2

B2
□□ Attach the left and right arm extenders (B1 and B2) to the B1
wall plate (A) using M6 x 8 bolts (QQ). RR
□□ Align spacers (KK, LL, MM or NN) over the mounting holes
on the back of your TV.
CC/DD/EE/FF
□□ Position the wall plate (A) with arm extenders (B) over OO/PP
spacers (KK, LL, MM or NN)) and attach them to the TV NN
using the appropriate sized bolts (CC - JJ) and washers (OO
or PP).

GG/HH/II/JJ
OO/PP

KK/LL/MM/NN

8
Installation (continued)

10 Attaching the TV to the wall plate

unit 11 Securing the TV and wall mount in
place
□ Turn the handle clockwise until it stops (Fig. 1), and pull the
CAUTION: Use two or more people to complete this step. handle out from the wall mount (Fig. 2).
□ With the handle pulled out of the wall mount, turn the
□ Align the wall plate (A1) with the end of the wall plate unit handle counterclockwise (Fig. 3).
(A2) and slide the tab (1) on the wall plate (A1) onto the top □ Push the handle back into the wall mount (Fig. 4), and turn
edge of the wall plate unit (A2). it clockwise to continue fastening the wall mount
□ Attach the bottom end of the wall plate unit (A2) to the wall (Fig. 5). Repeat these steps until until the TV is secured
plate (A1) using the bolts you removed in step 3. tightly against the wall mount.
□ Use the bubble level (C) and angle the TV as necessary to
NOTE: Keep the handle parallel with the wall. Otherwise the
ensure the TV is level before tightening in the next step. handle may break as the TV is pushed back against the wall.
C
Fig. 1 Fig. 2 Fig. 3

1
A2
A1
Fig. 4 Fig. 5

RR

12 Adjusting the angle of the TV

□ Adjust the angle of the TV by loosening the handle (1) on
A

±90˚

various angle adjustments. Securely tighten the handle (1)

+5˚

±5˚ -15˚

9 [Link]
Please contact 1-877-527-0313 for further assistance.
Questions, problems, missing parts? Before returning to the store,
call Commercial Electric Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday, 9 a.m. - 6 p.m., EST, Saturday

1-877-527-0313

[Link]

For additional support, call the manufacturer at 1-800-747-6558.

Retain this manual for future use.