Aurora Flex RGB
Channel Letter Solutions
and a large spectrum of vibrant colours. lt's available in
"Domed"(bending horizontally)&"top view"(bending
IP65
UV AMBIENT SALTWATER FLAME
DIMMABLE
RESISTANT -20~+45° RESISTANT RESISTANT
NEON SPECIFICATIONS
Working mode Constant Voltage Technology Packaging 20Ft/Tray, 5Trays/Case
Max Mods (Series) Full 88W load
Viewing Angle 270° UL and cUL Recognized
CRI >70 Warranty 3 Years
-20°C to +45°C
Neon Dimension 0.67"W x 1.06"H spots or gaps in the tube.
Eco-friendly flexible LED PVC For use in place of exterior or interior border
tube with UV stabilizers.
NEON PRODUCT OPTIONS LIST
Neon Voltage Power Cut Intervals LED LED Qty Viewing Angle
Aurora Flex RGB 24VDC 4.4W/Ft 6.6" SMD 5050 21LED/Ft 270
NEON DIMENSIONS ACCESSORIES
0.67"
1.06"
0.45"
G2G NEON RGB Controller
RF 20 key LED RGB Controller
Controller adopts the advanced micro control unit, it is used for controlling a variety of LED light. For
instance, point source of light, flexible light strip, wall washer lamp and so on. It has many advantages
such as good appearance, easy connection and simplicity to use. Adopts RF 20 key remote control to
ON/OFF, choose colors, change dynamic modes. Especially, it is designed with synchronization function.
It is convenient to use RJ45 connector to connect the multiple controllers together, and achieve the
synchronization function of thousands meters led strips. In theory, they can be connected numerous.
Product Features:
Designed for RGB constant voltage LED lights, [Link]*8A.
Working voltage DC12-24V, it can be universal in this range.
Adopts PWM digital technology, signal frequency: 400Hz.
Multiple controllers can work synchronically when connected by network cable through the RJ45
connector, the network cable between 2 ports up to 80 meters.
RF 20-key wireless remote, RF frequency: 433.92MHz.
14 modes in total, including 8 static colors and 6 dynamic changes.
Warranty of this product is 2 year warranty, exclude the artificial situation of damaged or overload
working.
Technical Parameters
Controller
Working temperature -20-60 Supply voltage DC12V-24V
Static power consumption <1W Connecting mode common anode
Grayscale 256 levelsRG B each Speed stage 100 grade
External dimension L91*W88*H24 mm Packing size L108*W108*H50 mm
Net weight 220g Gross weight 255g
Output 3 channels Output current 8A(each channel)
Mode 14 Remote distance Up to 20M
PWM frequency 433.92Mhz Memory function support
Max. Output power 12V:<288W, 24V:<576W
Remote control
Working temperature -20~6 0 Supply voltage DC3V CR2025
Standby current <3.3uA Working current <12mA
Standby power 9.9uW Working power 36mW
Net weight 30g RF frequency 433.92MHz
External dimension L85 * W51*H6 mm RF distance
External Dimension
Packing box: L108*W108*H50 mm
Interface Specifications
RGB Connection .
Direction for use
Connect the load wire and sync-signal cable at first, following by the power wire.
Ensure short circuit can not occur before you turn on the power.
Adopt RF wireless remote control, 20 keys in total, function of each button as below
Brightness + Brightness - pause on/off
Static red Static green Static blue Static white
Static orange Static yellow Static cyan Static purple
Auto run three base color jumpy Three color gradually change speed +
Flash seven base color jumpy Seven color gradually change speed-
RF CODE
Receiver can be controlled by any one the same remote as factory default; remote control delivered with unique RF
code as factory default; if unique-control is needed, please matching the code before installation and using.
Matching code operation
Receiver and Remote Control are coded as default, matching them before using,if unique-control or
new-coded-remote is needed, pairing the remote and the receiver as below operation instruction before
using:
[Link] 1 FLASH
white as responding.
[Link] 2: FL ASH
will change as 25%-10%-back to preset level.
[Link] learning successfully, the receiver only can be controlled by the remote.
[Link] not, please re-operate from step 1 to 2.
Clear code operation
Back to factory default, wall-panel can be controlled by any one the same remote control.
[Link] 1: Pressing key JUMP7
white as responding.
[Link] 2: Pressing JUMP7 3times in 3 seconds ,corresponding to the operation, the LED’s brightness
will change as 25%-10%-back to preset level.
3. Code clearing successfully, the LEDs will be back to the status before the power off, and the receiver can
be controlled by any remote control(any one the same remote control can be used to clear the code).
[Link] not, please re-operate from step 1 to 2.
Typical Applications
Application Circuit 1:
Application Circuit 2: Synchronization function with network Line
