Revision History

T37/T39/T76 ROM Family

Models Supported: HP EliteBook 830 G8 Notebook PC

HP EliteBook 840 G8 Notebook PC
HP EliteBook 850 G8 Notebook PC
HP ZBook Firefly 14 inch G8 Mobile Workstation PC
HP ZBook Firefly 15.6 inch G8 Mobile Workstation PC
HP EliteBook 840 Aero G8 Notebook PC

- Provides the following drivers and firmware for T37 systems:

EC/SIO Firmware, version 58.17.00 (TI PD: v7.9)
Intel GOP EFI Driver, version 17.0.1053
Management Engine (ME) Firmware, version 15.0.50.2633

- Provides the following drivers and firmware for T39 systems:

RealTek Power Delivery Firmware, 8.1 (P017PH-B2B)
EC/SIO Firmware, version 56.19.00
Intel GOP EFI Driver, version 17.0.1053
Management Engine (ME) Firmware, version 15.0.50.2633

- Provides the following drivers and firmware for T76 systems:

Cypress Power Delivery (PD) Firmware (CCG6), version 2.9 (P011Q9-B2H)
EC/SIO Firmware, version 30.57.00
Intel GOP EFI Driver, version 17.0.1053
Management Engine (ME) Firmware, version 15.0.50.2633

Version 01.21.00

ENHANCEMENTS:
- Addresses security vulnerabilities CVE-2023-48267, CVE-2023-48366, CVE-2023-
49603, CVE-2023-49615, CVE-2023-49618, CVE-2024-36262, CVE-2024-45332, CVE-2025-
20054, and CVE-2025-20109.

FIXES:
- General bug fixes.

PCR0 (TPM2.0) = T76 :

B473E8111200A92A7B341332E75D305DEEA021C646984CB9E6D8E9316087C1EE
T37 :
4E4C788192F99A01D13B5C156C7CD189AE6484760F3E451DE2B0B55232C346BA
T39 :
D8BCE7EF6EBFB1F0B5939368408140F0AFDC162510E67D8EBC5B5281A4BF6AAD

Version 01.20.00

ENHANCEMENTS:
- Addresses security vulnerabilities CVE-2021-39301, CVE-2024-26021, CVE-2024-
28956, and CVE-2024-30211.

FIXES:
For T39 systems only:
- Fixes an issue where the USB-C ports on the system do not detect certain USB-C
devices properly.

For T37 systems only:

- Fixes an issue where certain USB-C ports do not charge properly when connected to
certain docks.
PCR0 (TPM2.0) = T76 :
B9A5BF5FC2FFBCA9B75F75567C84D1F660D4A77D1413F7A4B15DE162CD27E6F0
T37 :
23C51C6285DA95BFD64EA41C131F0D783C733B99C88B89471151941F3541866B
T39 :
E2C04DCEBE005623120EDF1B2B46B9822B2AC9E66D640928B20992F47E1D1C68

Version 01.19.00

ENHANCEMENTS:
- Adds Enhanced Sign-in Security support for the fingerprint reader and the IR
camera on the system.
- Improves storage management when the BIOS firmware is updated.

For T76 systems only:

- Improves Smart Cover Support.

FIXES:
- Fixes an issue where a dock connected to the system cannot be detected when the
system is disconnected from AC power.
- Fixes an issue where the Generic Superspeed USB Hub is not listed in Device
Manager after the Hi-Res setting is disabled in the boot up settings while the
system is connected to a docking device.
- Fixes an issue where a USB-C device connected to the system disconnects
continuously and causes the system to display an error message requesting more
power.

PCR0 (TPM2.0) = T76 :

DCCB21BB8E0812D081A123F3C4FE497AF304D60A942421CCAA9B83CA755DB85A
T37 :
BEDD362F957E2376EA22671060BC40377FB039A0E224475CAC7330E83BAA6636
T39 :
57A542A1427499F5A049EB5B003FEA488839B7A5654D326EA979BB8021FCA577

Version 01.18.00

ENHANCEMENTS:
- Addresses security vulnerabilities CVE-2023-22351, CVE-2023-23904, CVE-2023-
25546, CVE-2023-34424, CVE-2023-38655, CVE-2023-40067, CVE-2023-41833, CVE-2023-
48361, CVE-2024-21844, CVE-2024-24853, CVE-2024-24853, CVE-2024-24968, and CVE-
2024-24968.
- Updates the names of all options in the Battery Health Manager settings.
- Updates Smart Discharge to version 2.2.

For T39 systems only:

- Updates the Realtek Type-C Power Delivery firmware to version V7.9.

FIXES:
For T37 systems only:
- Fixes an issue where the battery charge LED remains orange, indicating that the
battery is still charging, after the system exits shipping mode.
- Fixes an issue where the USB-C port does not function properly after the BIOS is
updated.

For T39 systems only:

- Fixes an issue on a system connected to a dock where the USB-C port no longer
detects the dock after a power surge occurs.
- Fixes an issue where the battery icon continues to indicate that battery (DC)
power is being used after the system is connected to an AC power source.
- Fixes an intermittent issue where the RealTek USB Type-C power delivery port
stops functioning after a BIOS update is run.
- Fixes an issue where the Intel Thunderbolt Retimer Firmware Update fails to
install when a BIOS update is run while the system is connected to a power delivery
(PD) monitor.

PCR0 (TPM2.0) = T76 :

7C854E2CCF6667071B6C3F1279EAD6092481594B4B27433D55C8C85B7710160B
T37 :
32F91AFF4F98B9451E9E86CD71EFDF0716D3116F4801886C9A4B175E0F63FF0D
T39 :
5DA834FAB5FBFC6F8CD9208D8F4554939BED584D735AA9AA4603DBEB851A6B50

Version 01.17.01

ENHANCEMENTS:
- Implemented smart discharge v2.1
- Add MINIMIZE BATTERY HEALTH MANAGEMENT option to F10 and HPX for user can
disabled BHM in BIOS
- Implemented new F10 and HPX menu option to disable BHM permanent step-down

FIXES:
- Fixes an issue the keyboard or mouse are jumpy and delayed in the BIOS menu when
connect D6000 dock to host

For T76 systems only:

- Fixes an issue Monitor can't display after resume from S4 with HP USB-C Dock G5

For T39 systems only:

- Fixes an issue the 740PM monitor can�t display after off/on the monitor AC

PCR0 (TPM2.0) = T76 :

86F1A938599355E402B58AE8C99A2865537FB355B667D6EA124DFEC181927DFA
T37 :
6A9D42F670F4B817A7CAB950C65EC7BBC10777AB2A152E7BBC0C0595AD0946E9
T39 :
84966167124486169726414C450E04AD51372F6AFCE0AE6BA6E3A77990750161

Version 01.16.00

ENHANCEMENTS:
- Addresses security vulnerabilities CVE-2023-23583, CVE-2023-27502, CVE-2023-
27504, CVE-2023-28383, CVE-2023-28389, CVE-2023-28402, CVE-2023-32282, and CVE-
2023-32633.
- Reserves a 32 GB partition on the hard drive for Sure Recover Partition-Based
Recovery use.
- Adds the item, Measure additional DMA settings, to prevent the system from
entering BitLocker recovery mode after the DMA Protection setting is disabled.
- Updates the RealTek 8153/8156 UEFI driver to version 2.043.
- Improves the display processing mechanism.

FIXES:
- Fixes an issue where the incorrect characters are generated when the internal
keyboard is used.
- Fixes an issue where certain options that are present in UefiBIOSConfig file are
not present in the [Link] file.

For T39 systems only:

- Fixes an issue on a system connected a USB-C dock where the system no longer
functions after Windows Update is run.
- Fixes an issue where an external monitor connected to dock remains blank after
the system resumes from sleep mode.
- Fixes an issue where the battery of a system connected to a 15W USB-C adapter
cannot charge while the system is in a sleep, hibernate, or shutdown state.
- Fixes an issue where a USB-C dock connected to the system cannot be detected
after a BIOS update is run.

PCR0 (TPM2.0) = T76 :

A9C3B259DA0584CA8BE3C5F28A44210734E0728793B0DC82745D17A5BC9DA224
T37 :
EE20C05451745818F728D2EA6D036C8D962C080B06CD46D1CE2513BB1AD57726
T39 :
E8F017A4C1EF643AD33FEF107A9DD7BF80BE24EBC1CFAE2159CF169A21079CAC

Version 01.15.02

ENHANCEMENTS:
- Provides the BIOS update. NOTE: HP strongly recommends updating the system BIOS
to address a potential issue with HP Sure Start that can cause some devices to
experience a SecureBoot error at boot.
- Addresses security vulnerabilities CVE-2023-22329 and CVE-2023-25756.
- Updates the message that is displayed when a Non-HP Battery is detected.
- Updates the Intel UEFI Wi-Fi driver to version 2.2.24.23283.
- Updates the Intel MCU to enhance compatibility.
- Adds HTTPS support for Sure Recover in the pre-boot environment for operating
system recovery.
- Provides support for the 5.15-5.35 GHz band.
- Provides support for the SMBIOS type1 version string for db addition.
- Adds Android Ready Support to the BIOS for Windows-to-Android Conversion on
Android Ready computer models.

FIXES:
- Fixes an issue that occurs while flashing the BIOS which causes the system to
display the message, Intel Thunderbolt Retimer Firmware Update failed.
- Fixes an issue on a system connected to a network through an HP Thunderbolt G4
Dock where the network is not recognized in the pre-OS environment.
- Fixes an issue where Power-On Authentication using the fingerprint reader does
not function properly.
- Fixes an issue that occurs after the EBAM and BIOS admin passwords are set where
flashing the BIOS with the correct password causes the Firmware Update and Recovery
Utility interface to display the message, Incorrect password was entered.
- Fixes an issue where the fan fails UEFI diagnostics when the fan when fan speed
is set to 100%.

T37 systems only:

- Fixes an issue on a system running in battery mode with less than 5% battery
capacity remaining where the system fails to power on after High Resolution mode is
enabled in the BIOS setup menu.

T39 systems only:

- Fixes an issue the USB-C port does not function and an error symbol (yellow bang)
is displayed on USB Connector Manager.

PCR0 (TPM2.0) = T76 :

A3D1980E44788FD9E0A094EC969416BCFD1827FFC1926BF155A50904CD335CA9
T37 :
1A3B2753B8E55F218C1C4FC194FD1A3968A25FF54A27B185865EB5764BEECB8E
T39 :
C9F25AA7791770868ADA26FB08C297312F48C6E99C86BE5F9B866D72FCE0560C

Version 01.15.01

ENHANCEMENTS:
- HP strongly recommends updating system BIOS to address a potential issue with HP
Sure Start that can cause some devices to experience a SecureBoot error at boot.
- Addresses security vulnerabilities CVE-2023-22329 and CVE-2023-25756.
- Updates the message that is displayed when a Non-HP Battery is detected.
- Updates the Intel UEFI Wi-Fi driver to version 2.2.24.23283.
- Updates the Intel MCU to enhance compatibility.
- Adds HTTPS support for Sure Recover in the pre-boot environment for operating
system recovery.
- Provides support for the 5.15-5.35 GHz band.
- Provides support for the SMBIOS type1 version string for db addition.
- Adds Android Ready Support to the BIOS for Windows-to-Android Conversion on
Android Ready computer models.

FIXES:
- Fixes an issue that occurs while flashing the BIOS which causes the system to
display the message, Intel Thunderbolt Retimer Firmware Update failed.
- Fixes an issue on a system connected to a network through an HP Thunderbolt G4
Dock where the network is not recognized in the pre-OS environment.
- Fixes an issue where Power-On Authentication using the fingerprint reader does
not function properly.
- Fixes an issue that occurs after the EBAM and BIOS admin passwords are set where
flashing the BIOS with the correct password causes the Firmware Update and Recovery
Utility interface to display the message, Incorrect password was entered.
- Fixes an issue where the fan fails UEFI diagnostics when the fan when fan speed
is set to 100%.

T37 systems only:

- Fixes an issue on a system running in battery mode with less than 5% battery
capacity remaining where the system fails to power on after High Resolution mode is
enabled in the BIOS setup menu.

T39 systems only:

- Fixes an issue the USB-C port does not function and an error symbol (yellow bang)
is displayed on USB Connector Manager.

PCR0 (TPM2.0) = T76 :

051D0CB0FE509DE9F22187E01471B306552368B8C32B288FC83D34F61F008D6C
T37 :
989BA825EEAD34B350431D43419CD0503D0117515C35132B6085698714ED8587
T39 :
B65DD6D8E22B4BC6717EE08398F7BAF477D815BEEDF10AD58F046127A54A0730

Version 01.14.00

ENHANCEMENTS:
- Addresses security vulnerabilities CVE-2022-29871 and CVE-2022-36392.
- Addresses security vulnerabilities CVE-2022-44611.
- Updates the Intel MCU to enhance compatibility.
- Adds UEFI Video Port I/O Check in the HP PC Hardware Diagnostics.
- Updates the Infineon TPM EFI Driver to version 02.02.3776.00.
- Provides a feature under the Security tab in F10, Clear BIOS Passwords on RTC
Battery Removal.

FIXES:
- Fixes a potential security issue where the system does not ask for the BitLocker
key when Direct Memory Access (DMA) protection is disabled, even though BitLocker
is enabled.
- Fixes an issue where an external monitor connected through an HP Thunderbolt G4
Dock is not detected after the system resumes from a hibernation state.
- Fixes an issue where the system battery level drops after an HP 4K USB-C
multiport Hub is connected through a 65W USB-C adapter.
- Fixes an issue where the battery does not recharge correctly when the Maximize my
battery health option is set.
- Fixes an issue where the BIOS cannot be updated when Enhanced BIOS Authentication
Mode (EBAM) is enabled.

T37 systems only:

- Fixes an issue where a system connected to a USB-C DisplayPort alt mode dock does
not power on properly when running on AC only with High-Resolution mode is enabled.

T39 systems only:

- Fixes an issue which causes a UCSI driver failure with error code 43 when a
system is connected to a USB-C docking station.

PCR0 (TPM2.0) = T76 :

71FB20B6F59505A8B98FA2C70C7C918A67D04F314A15032A8F32EA0739ABE9BE
T37 :
6FB746FC82A49DE4C33B261A73EBAC96FB5B5403373748FBE9D3946D7CD74DAD
T39 :
7AF64E0DF85422661356E4DCA1E403B34046BC8D1D823DDC7272BAD6BB05BDCE

Version 01.13.01

ENHANCEMENTS:
- Addresses security vulnerabilities CVE-2022-27635, CVE-2022-36351, CVE-2022-
38076, CVE-2022-40964, and CVE-2022-46329.
- Provides support for the USB Audio Offload setup option to avoid the issue, USB
headsets aren't recognized by Skype for Business on recent Intel platforms.
- Provides support for PXE boot with an FIT0798 ethernet module.
- Improves the help message translation of Thunderbolt Mode in the BIOS setup menu.
- Provides support to PXE boot with an i-Tec USB Ethernet dongle.
- Provides support for a new feature that displays a QR code and the URL to the
correct HP Support documentation after a POST error.
- Updates the Intel i225-V EFI Driver to version 0.10.5.
- Updates the Intel silicon reference code to enhance compatibility.
- Updates the Intel silicon MCU.
- Updates HP Diagnostics Driver to version [Link].
- Adds support for Extended DHCP Timeout in the BIOS setup menu.
- Improves charging stability in Windows 11.

FIXES:
- Fixes an issue where an HP Z38c Monitor does not display properly after
disconnecting and reconnecting the monitor while the system is in a hibernation or
shutdown state.
- Fixes an issue where the screen does not display properly when the system is
connected to a HP USB-C/A Dock G2.
- Fixes an issue where deselecting the Thunderbolt Type-C Ports setting in the BIOS
setup menu causes a blue screen event to occur with the error message,
ACPI_BIOS_ERROR.
- Fixes an issue where a system connected to a network through a USB-C to RJ45
dongle randomly drops the network connection.
- Fixes issue where a POST Power-On Password cannot be set after a BIOS
Administrator Password is set in Enhanced BIOS Authentication Mode.
- Fixes an issue where LAN connections do not function properly when the source is
switched.

For T37 systems only:

- Fixes an issue on a system that enters and resumes from hibernation while
charging through an HP USB-C Essential Power Bank where the system displays the
message, PC is not charging.
- Fixes an issue which causes a USB-C power surge error when the system is
connected to a USB-C Iiyama Prolite XUB2492HSN monitor.

For T39 systems only:

- Fixes an issue on a system that enters and resumes from hibernation while
charging through an HP USB-C Essential Power Bank where the system displays the
message, PC is not charging.
- Fixes an issue where a USB drive cannot be detected after a Type-C adapter is
disconnected and then an HP USB-C to USB 3.0 Adapter is connected through the same
port.
- Fixes an issue where an external monitor cannot be detected in Device Manager
after Thunderbolt Mode is changed to enable or disable in the BIOS through an HP
Elite USB-C Multi Port Hub connected to the system.

PCR0 (TPM2.0) = T76 :

E6FFD16A08C5758DC5273DECE6CE9E3C595B5DEC14BBC5D350334AD08B6E99F8
T37 :
FEACA690E0C00B49E176053C287DBB2C710585937289A4B09295EFFF9AF9B4BC
T39 :
C8BD9A35B4FE0DC76013EDF505D18D51415B561641A267BE710E08173BA98E72

Version 01.12.10

ENHANCEMENTS:
- Enhancement to support "USB Audio Offload" setup option to avoid the problem of
"USB headsets aren't recognized by Skype for Business on recent Intel platforms"

FIXES:

PCR0 (TPM2.0) = T76 :

B0775B16C424A6D4EFF3A482098993AA1B8817B334E3DA8F7ABD1C5BE4B9F7C6
T37 :
733CC13CB427A717F0335607CA08A32D2405476A59C38B7E9AC269A5BCF01CC5
T39 :
0987E81A64304CA824FA945075AECF0C6D7F73BB56CA27BF262866FF8A128753

Version 01.12.00

ENHANCEMENTS:
- Enhancement to update Intel UEFI Wi-Fi Driver to 2.2.17.22362
- Updates the thermal management algorithm to improve fan noise
- Enhancement to address security vulnerabilities CVE-2022-30704
- Updates the Intel silicon reference code for compatibility enhancement
- Adds BIOS F10 menu charging setting to disable sets Type-C ports to sink only
when thne system in s4 hibernate and s5 shutdown and change it back to dual role
when system power on.
- Enhancement to support PXE boot with Dell and Lenovo USB Ethernet dongles or
Docking station
- Enhancement to implement code to handle post error map to corresponding URL.
- Enhancement to add URL and QR code links for DT SMART error 30D~312.
- Enhancement to port Implementation of Drivelock Event Logging.
- Enhancement to integrate Sure Run Service Release v5.0.1.13.a.1.
- Updates basic HP PC Hardware Diagnostics utility to [Link].
- Enhancement for failure when trying to recover HP Image via network.
- Enhancement the experience of modern standby

FIXES:
- Fixes an issue where the system auto resume from hibernate and shutdown, when
launches Tile Mobile App to find the Laptop Tile
- Fixes an issue where system pops up message "PC isn't charging" after reboot with
the 15W USB-C PD adapter connected

T76 only
- Fixes an issue where system shows not charging when plug in HP USB-C/A Dock G2,
HP USB-C Dock G5 or HP Docking Station
- Fixes an issue where the system didn't reconnect to the Tech Pulse server after
erasing using Tech Pulse then re-installing OS.

T39 only
- Fixes an issue where system shows charging, but actually not charging when plug
in Chicony 65 Watt nPFC Standard USB type C Straight 1.8m (Ceto)

T37 only
- Fixes an issue where system shows charging, but actually not charging when plug
in Chicony 65 Watt nPFC Standard USB type C Straight 1.8m (Ceto)
- Fixes up an issue where 'Generic SuperSpeed USB Hub' does not exist in 'Device
Manger' after disable Hi-Res with Comm Accy Placeholder connected USB-C monitor

PCR0 (TPM2.0) = T76 :

1CB08107A90832F46D5527F260CD5BC7BDC0D569C5F4D2FCBD2F9E08BED01EEA
T37 :
3E31CAFA6767F0470D83381AB8B7BED1DE81E1EEC1FF1F0B590CDA8EDCC5C776
T39 :
7C8032AB29CF9B888869A453960CCDCB1A07819E2EBEF06A7D27F13CE8A02B36

Version 01.11.00

ENHANCEMENTS:
- Enhancement to address security vulnerabilities CVE-2022-21198.
- Enhancement to support new Micron 32GB memory
- Enhancement to address security vulnerabilities CVE-2022-26845, CVE-2022-29893,
CVE-2022-27497, CVE-2022-33159.
- Updates the Preboot Wifi driver to v2.2.15.22272.
- Updates the CPU microcode for Intel processors for stability enhancement.
- Retrieving data. Wait a few seconds and try to cut or copy again.
- Updates HP Sure Run Agent to v5.0.1.11 for compatibility and stability
enhancement.
- Updates basic HP PC Hardware Diagnostics utility to [Link].
- Enhancement to address security vulnerabilities CVE-2022-27538, CVE-2022-27541,
CVE-2022-27539, CVE-2022-43777, CVE-2022-43778, CVE-2022-27540.

T76 only
- Enhanced the stability of USB-C connection on Windows 11 22H2

FIXES:
- Fixes an issue where system auto wake up second time after wake up on lan(WOL)
via HP USB-C Dock G5 and and HP USB-C/A Dock G2.

T76 only
- Fixes an issue where Chicony 65W Ceto USBC adaptor shows charging ,but actually
not charging.
T39 only
- Fixes an issue that the 2nd external monitor resolution cannot reach 2550*1440
when attach 4K+2K DP monitor on USB-C Dock G5

PCR0 (TPM2.0) = T76 :

DF344B8E6C964816D797520CC7571800E391F31C299F3C64BD5EF81408A54E9C
T37 :
0A8D0767CD4A76CD8883BD6EC15CAF4A4CE7E256BEFCA5F36FC94C82E5FFC63E
T39 :
133B27F881334A94FB2807885EFD5F88519A5BA86D73F6ACB6B784EB54AD31D1

Version 01.10.00

ENHANCEMENTS:
- Addresses security vulnerabilities CVE-2021-23223, CVE-2021-37409.
- Addresses security vulnerabilities CVE-2022-31644, CVE-2022-31645, CVE-2022-
31646, CVE-2022-27537.
- Addresses security vulnerabilities CVE-2022-31643.
- Improves background brightness on the camera.
- Provides dynamic adjustment of the battery charge level based on usage patterns
to improve battery health.
- Provides improved Sure Admin security to bind QR-code metadata to the Sure Admin
PIN for local administration.
- Improves the error message displayed when flashing a USB-C controller fails.
- Improves connection stability when HP Sure Recover is run.
- Updates HP Sure Run Agent to version 5.0.0.38894 for compatibility and stability
enhancement.
- Provides support for a new Samsung memory module.
- Adjusts the max fan speed in the HP Diagnostics UEFI to not exceed 100%.

FIXES:
- Fixes an issue where the system does not completely display the feature, HP will
balance your battery health and battery duration [Enabled].
- Fixes an issue where an incorrect Windows Security button message is displayed on
the Windows lock screen.
- Fixes an issue on a system with Lock BIOS Version enabled in the F10 setup where
a BIOS update can be enabled using the ESC Startup menu.
- Fixes an intermittent issue where the speed of a USB3 device decreases to USB2
speeds.
- Fixes an issue where the system does not recharge through a USB Type-C 90W
adapter after the system enters critical hibernate (power options default is 4%).
- Fixes an issue that occurs when MultiKey is permanently disabled, the HP Find,
Lock & Wipe feature is also disabled.
- Fixes an issue where keypresses are unexpectedly repeated when the system is
connected to a wired keyboard through the USB-C Dock G5.

PCR0 (TPM2.0) = T76 :

E0C8A0F43E6BFA3879126ECCA4B2CEA519E0ACDA83D467BE92E283C8A8E7B6BC
T37 :
C0EB5AD8E3348CEF0C762376E46B7E4C525A222D880F30A3EBD4D43B2C69ECC1
T39 :
D19C25F9B2C11353A74422971B1082209F59C243699067200506103487632813

Version 01.09.10

ENHANCEMENTS:
- Enhancement to address security vulnerabilities CVE-2022-31635, CVE-2022-31636,
CVE-2022-31637, CVE-2022-31638, CVE-2022-31639.
- Enhancement to address security vulnerabilities CVE-2022-31640, CVE-2022-31641,
CVE-2022-31642.

FIXES:
- Fixes an issue where system hang during restoring factory default settings.

PCR0 (TPM2.0) = T76 :

F7B51E7FADFBBA956EE79C3FE90ADDE43AE958E19D0698EE8A4EDE73A4EEF726
T37 :
DCFC9BB4908D4383AD7C5915BF2766F481BE9828F75B372239DD490134CB3F87
T39 :
160453892DDFCCA255DA61DC3647C7F336279A6C86A5A8093DF2E581BBF006B0

Version 01.09.01

ENHANCEMENTS:
- Addresses security vulnerabilities CVE-2021-33122.
- Addresses security vulnerabilities CVE-2021-33103, CVE-2021-33123, CVE-2021-
33124.
- Addresses security vulnerabilities CVE-2022-0004.
- Addresses security vulnerabilities CVE-2022-21123.
- Addresses security vulnerabilities CVE-2022-23924, CVE-2022-23925, CVE-2022-
23926, CVE-2022-23927, CVE-2022-23928, CVE-2022-23929, CVE-2022-23930, CVE-2022-
23931, CVE-2022-23932, CVE-2022-23933, CVE-2022-23934.
- Addresses security vulnerabilities CVE-2022-23953, CVE-2022-23954, CVE-2022-
23955, CVE-2022-23956, CVE-2022-23957, CVE-2022-23958.
- Adds a feature to control the display of the BIOS Admin login based on the
setting, BIOS Administrator visible at power-on authentication, when Enhanced BIOS
Authentication Mode (EBAM) is set.
- Provides support for the Intel WLAN AX201 802.11ax in Russia and Indonesia on the
WLAN 5.15-5.35 GHz band.
- Improves the stability of the face auto exposure feature of the camera.
- Updates the splash screen with Protected by Sure Start bitmaps.
For T37 systems only:
- Updates the USB Type-C Power Delivery (PD) Firmware to version 7.5.
For T39 systems only:
- Adds a new BIOS family to support additional USB Type-C Controllers.

FIXES:
- Fixes an issue where the system does not boot properly after switching between
two different saved boot stores.
- Fixes an issue where the PXE boot option is not available when the system is
connected to an HP Thunderbolt Dock G4.
- Fixes an issue on a system with Intel Wireless-AC 9560 where the pop-up message
warning that Bluetooth is disabled is not displayed when the WLAN is disabled.
- Fixes an issue where the system continuously attempts to recover the Management
Engine driver when the recovery image is deployed through a third-party
application.
- Fixes an issue where the clickpad controller firmware update does not install
properly.
- Fixes an issue on a system connected to a network through a USB Type-C
dongle/dock where the system disconnects from the network after a BIOS/firmware
update.
For T39 systems only:
- Fixes an issue where the Type-C LAN dongle does not function properly after the
BIOS is updated to version 01.06.02.
For T76 systems only:
- Fixes an issue that occurs when the BIOS is updated by the Firmware Update and
Recovery Utility (FUR) where a logo is incorrectly displayed when the system
restarts.

PCR0 (TPM2.0) = T76 :

11C3484F9155F8B1E5DF671ED6AFF2AE4BAED14A124AE996C557D573763776BA
T37 :
79CE62EABFB2E82FD7C1774947588BAEFD47DC532F21D72ABBD89D82848053F1
T39 :
DA64EFECC098F9D77DF6C1EBDDA43239840F980CD8E81853ADFAD45095520034

Version 01.09.00

ENHANCEMENTS:
- Enhancement to improve face auto exposure stability
- Enhancement to address security vulnerabilities CVE-2022-21123
- Enhancement to address security vulnerabilities CVE-2021-33122.
- Enhancement to address security vulnerabilities CVE-2021-23223, CVE-2021-37409.
- Enhancement to extend Intel WLAN AX201 (Harrison Peak2) 802.11ax support in
Russia and Indonesia WLAN 5.15-5.35 GHz band.
- Enhancement to improve face auto exposure stability.
- Enhancement to address security vulnerabilities CVE-2021-33123, CVE-2021-33124,
CVE-2021-33103.
- Enhancement to address security vulnerabilities CVE-2022-23924, CVE-2022-23925,
CVE-2022-23926, CVE-2022-23927, CVE-2022-23928, CVE-2022-23929, CVE-2022-23930,
CVE-2022-23931, CVE-2022-23932, CVE-2022-23933, CVE-2022-23934.
- Enhancement to address security vulnerabilities CVE-2022-23953, CVE-2022-23954,
CVE-2022-23955, CVE-2022-23956, CVE-2022-23957, CVE-2022-23958.
- Adds a feature to control display of BIOS Admin login based on BIOS Administrator
visible at power-on authentication when Enhanced BIOS Authentication Mode (EBAM) is
set.
- Enhancement to address security vulnerabilities CVE-2022-0004, CVE-2021-33159.
- Update splash screen with Protected by Sure Start bitmaps.
For T37 only:
- PD F/W update to v7.5 with fixes an issue where need to charge for about 15
minutes before boot to os after the battery level drain out to 0% when connect the
monitor to unit via USB-C cable.
For T39 only
- Adds new BIOS family for new USB Type-C Controller support.

FIXES:
- Fixes an issue where there is no pop up message for Bluetooth disablement when
disable WLAN with Intel?Wireless-AC 9560.
- Fixes an issue where system attempt to recover ME infinitely if customer deploy
recover image via 3-party application
- Fixes an issue where there is no PXE boot option when connect to HP Thunderbolt
Dock G4.
- Fixes an issue where system failure to update clickpad controller firmware.
- Fixes an issue where network connected via USB Type-C dongle/dock loses
connection after BIOS/firmware update.
- Fixes issue where system failure to boot after switching between two different
saved bootstores.
For T39 only
- Fixes an issue where Bios update to 01.06.02 the Type-C Lan dongle was not
function.
For T76 only
- Fixes an issue where FUR Bios update from 01.07.02 to 01.08.00 new HP Logo is
shown and the boot loop starts
PCR0 (TPM2.0) = T76 :
71E268791110A9D44D1A014FE373A9BB7A7F69B3C6B6A4C2DAAC79A359412EF8
T37 :
81C0F18B42BE98661523E0DE0894C4DC623023409A1DBE434E225605B26AC2BB
T39 :
B51F6594CF60885F12FB6CC63F29F6C522B5C1AB83A9066EC15507F8619E8E5D

Version 01.08.20

ENHANCEMENTS:
- Enhancement to address security vulnerabilities CVE-2022-23924, CVE-2022-23925,
CVE-2022-23926, CVE-2022-23927, CVE-2022-23928, CVE-2022-23929, CVE-2022-23930,
CVE-2022-23931, CVE-2022-23932, CVE-2022-23933, CVE-2022-23934.
- Enhancement to address security vulnerabilities CVE-2022-23953, CVE-2022-23954,
CVE-2022-23955, CVE-2022-23956, CVE-2022-23957, CVE-2022-23958.
- Adds a feature to control display of BIOS Admin login based on BIOS Administrator
visible at power-on authentication when Enhanced BIOS Authentication Mode (EBAM) is
set.

FIXES:
- Fixes issue where system failure to boot after switching between two different
saved bootstores.

PCR0 (TPM2.0) = T76 :

347A7153B67EFD154D50053731DABEDD0C6FC57D69CDEA90D83FC61F50F038FE
T37 :
9646D40EA7EFF6A91DA5671049DD5F7B7D27FB1526030AB078EC033CC39DA1EE

Version 01.08.00

ENHANCEMENTS:
- Addresses security vulnerabilities CVE-2021-39297, CVE-2021-39299, CVE-2021-
39300, CVE-2021-39301.
- Updates the splash screen with Protected by Sure Start bitmaps.
- Updates the Intel Thunderbolt retimer firmware to version [Link].
- Provides support for the Hynix 32GB memory module.
- Provides support for the Realtek audio codec.

FIXES:
- Fixes an issue where the system displays the incorrect unlock screen message when
the system screen is locked.
- Fixes an issue where system battery does not recharge properly through the HP
Thunderbolt Dock G4r.
- Fixes an issue where a system that attempts to update firmware via FTP server
with proxy from the F10 setup interface reports the error, Failure during data
transfer (maximum downloaded content size exceeded).
- Fixes an issue where an unsupported Thunderbolt Dock is displayed in the BIOS
Config Utility.
- Fixes an issue where the audio replay volume is lower than expected after the
BIOS is updated.

PCR0 (TPM2.0) = 70EE7804465E4706A4C891043A17448835886BC11BBAE74BCD94E935DFBFBBA8

Version 01.07.02

ENHANCEMENTS:
- Enhancement to address security vulnerabilities CVE-2021-0145.
- Enhancement to address security vulnerabilities CVE-2021-0157, CVE-2021-0156.
- Enhancement to address security vulnerabilities CVE-2021-0107, CVE-2021-0111,
CVE-2021-0114, CVE-2021-0115, CVE-2021-0116, CVE-2021-0117, CVE-2021-0118, CVE-
2021-0119, CVE-2021-0124, CVE-2021-0125.
- Update camera Firmware Management to enhance camera firmware flash stability
- Update HP Sure Run Agent to v5.0.0.26569 for compatibility and stability
enhancement.
- Adds Windows11 operating system support.
- Enhancement to address security vulnerabilities CVE-2021-0107, CVE-2021-0111,
CVE-2021-0114, CVE-2021-0115, CVE-2021-0116, CVE-2021-0117, CVE-2021-0118, CVE-
2021-0119, CVE-2021-0124, CVE-2021-0125.
- Enhancement to address security vulnerabilities CVE-2021-33113, CVE-2021-33115.
- Correct help string for F10 "Special Keys mapped to Fn+Keypress"
- Correct POST error message for "300-Confguration change warning" on Traditional
Chinese

FIXES:
- Fixes an issue where Thunderbolt grahpic card doesn�t work properly after
restarting unit.
- Fixes an issue where can't adjust brightness by FN+F3/F4 when Privacy Panel
brightness turned on in F10
- Fixes an issue where charge LED from amber change to white when battery charging
to 88%
- Fixes an issue where it showes yellow bang in device manager on UCSI item.
- Fixes an issue where mobile hotspot doesn�t work properly when a device connects
to 5GHz channel.
- Fixes issue where HP Sure Run failure to enable with error message "Operation
failed with the following error code:4" when "Remote Device Management" permanently
disabled.
- Fixes issue where option in F10 setup menu does not match option get from BIOS
Configuration Utility when HP Cloud Managed is permanently disabled.
- Fixes issue where some F10 settings or help message display incomplete when
change to non-English language."
- Fixes an issue where HP logo doesn't appear when system triggers ME recovery.

PCR0 (TPM2.0) = 2A382FFFAA90861C18C45568BDFB25A7EDA5915D6561DACA2689EBA7EE17378A

Version 01.06.02

ENHANCEMENTS:
- Addresses security vulnerabilities CVE-2021-0072, CVE-2021-0161, CVE-2021-0164,
CVE-2021-0165, CVE-2021-0166, CVE-2021-0168, CVE-2021-0170, CVE-2021-0076, CVE-
2021-0183.
- Updates the power-on battery warning message when the battery capacity is low.
- Updates the battery capacity icon display when Maximize My Battery Health is set
in the F10 settings and the battery is fully charged.
- Provides support for the Apple USB-C 87W adaptor.
- Provides support for a new camera module.
- Updates the Realtek USB UEFI PXE driver to v2.035.
- Updates HP Sure Run Service Agent to enhance compatibility and stability.
- Delays the response of the power button on the keyboard to avoid accidental
activation of the power button during sanitization mode while HP Easy Clean is
used.
- Provides support for the Soft Start feature.
- Provides support for the Apple XDR display.
- Updates the Intel reference code to provide enhanced stability and compatibility.
- Adds support for a new memory module.
- Improves power management on systems running multiple Type-C ports.

NOTE: Due to the enhanced security features included in this update, the BIOS
cannot be downgraded to an earlier version after this package is installed.

FIXES:
- Fixes an issue on a system with Sure Admin enabled where the Power-On Password
cannot be cleared after the defaults are restored using Restore Security Settings
to Factory Defaults.
- Fixes an issue where the CTRL+ALT+Insert key combination does not function in the
Fn unlock mode.
- Fixes an issue where the current and new version numbers in the HP Firmware
Update and Recovery tool are reversed.
- Fixes an issue where the touchscreen does not function in the F10 menu.
- Fixes issue where the HP Sure Recover page is not displayed correctly in the F10
setup menu after the display language is changed to a non-English language.
- Fixes an issue where the system cannot charge the battery when battery is in
shipping mode.
- Fixes an issue where the HP Thunderbolt G2 dock disconnects from the system
unexpectedly.

PCR0 (TPM2.0) = 9E4BD2BEE9B44D6E74744FA8BCE34B946E6B0BD0ECAA3C0727762D52EE2ABB1D

Version 01.04.01

ENHANCEMENTS:
- Addresses security vulnerabilities CVE-2021-0069, CVE-2021-0071, and CVE-2021-
0075.
- Addresses security vulnerabilities CVE-2020-12359.
- Addresses security vulnerabilities CVE-2020-8700, CVE-2020-8703, CVE-2020-24507
and CVE-2020-24516.
- Addresses security vulnerabilities CVE-2020-24489, CVE-2020-24511, and CVE-2020-
24512.
- Improves Customer Experience when a 3rd party device is used to charge the system
through the USB-C port.
- Updates the UEFI Wi-Fi Driver to version 1.2.4.2193 to enhance connection
stability in the pre-boot environment.
- Adds camera firmware update capability for additional supported camera devices.
- Improves the performance of the clickpad firmware update process.
- Enhances cursor movement when the clickpad is used.
- Enhances cursor movement when a Bluetooth mouse is used.
- Provides enhanced stability when an external monitor is connected to the system
using an HP USB-C Dock G5.
- Updates the Intel Sensor Hub firmware to version 5.4.300.4468.

FIXES:
- Fixes an issue where the keyboard Fn key LED does not power off when the system
is in hibernation.
- Fixes an issue on a system connected to an HP dock that enters hibernation where
the system restarts or shuts down during Wake on LAN.
- Fixes an issue that occurs on a system connected to an external monitor using an
HP Docking station where the speaker on the monitor does not function properly
function after the system resumes from a hibernate or system off state while the
lid is closed.
- Fixes an issue on a system with the lid closed where the system cannot power on
with external monitor connected though HP Docking station.

PCR0 (TPM2.0) = 4A0024313F0A692D5D4ED2F8C2BFC2425B758C8AC87AD22403DE0D42582367F7

Version 01.01.32
- Fixes an issue where a system connected to a dock monitor stops functioning
(hangs) when a BIOS update is performed.

- Fixes an issue where an external monitor connected to the system using VGA or
DisplayPort displays a black screen after the system is powered on (cold boot)
while the lid is closed and BitLocker is enabled.

- Fixes an issue where the F1 through F12 keys do not function properly.

- Fixes an issue where the system cannot boot to PXE from an IPv4/IPV6 network
after Custom/system address is enabled in the F10 menu.

- Fixes an issue which causes an error to occur when the HP Sure Admin QR Code is
used on a system when Intel AMT (Active Management Technology) is disabled and Pre-
boot WiFi is enabled.

- Fixes an issue where the SSD ID string is incomplete in Secure Erase in the F10
menu.

- Fixes an issue where system continues to boot to the USB recovery partition and
not the USB image partition after the USB drive is selected from the boot menu.

- Fixes an issue where the system does not boot successfully after the A/C power
adapter is disconnected from the system during a capsule BIOS update on EMMC
systems.

- Improves the resume time from Modern Standby time when the system is running in
DC mode.

- Improves the Modern Standby (MSC) experience when the system transitions from AC
to DC power mode while the lid is closed.

- Enables the second source ELAN Clickpad Firmware update.

- Enables Brightness hotkey support for Linux Ubuntu.

- Adds the Permanent Configuration of Boot Order for external network devices.

- Limits system power when the system is running in DC mode and the battery
temperature is below 10C.

PCR0 (TPM2.0) = 48A46D5C8AD10C3F55E5A1423C700CC519A0A4F1902EAC2C5EC20DE3C6187BD5

Version 01.01.04

PCR0 (TPM2.0) = 8D09D72E59E783817DD6847FECDA9CFE2B8C8B71DEEE02472555271ADB1AA69E