TR Series Stackpole Electronics, Inc.

TO-220 and TO-247 Style Power Resistor Resistive Product Solutions

Features: • TR20/30/35/50/50H comes in TO-220 style power package

• TR100 available in TO-247 style power package
• TR30/35/50H/100 has single screw mounting to heat sink
• Molded case for environmental protection
• Electrically isolated case
• Non-inductive package

Electrical Specifications
Power Rating (Watts) Power Rating Maximum Resistance
Package Ohmic Range (Ω) and Tolerance
Type / Code @ 25ºC with (Watts) Working Temperature
Style
Heat Sink (3) @ 25ºC Voltage (1) Coefficient 0.5% 1% 5% 10%
±50 ppm/ºC 10 - 10K 10 - 10K 10 - 10K 10 - 10K
TR20 TO-220 20W 3W
±100 ppm/ºC 10 - 10K 3.01 - 10K 3.3 - 10K 3.3 - 10K
350V ±200 ppm/ºC 10 - 10K 3.01 - 10K 3.3 - 10K 3.3 - 10K
TR30 TO-220 30W 2.25W
±300 ppm/ºC - 1.02 - 3 1.1 - 3 1.1 - 3
TR35 TO-220 35W 2.5W (2) - - 0.05 - 1 0.05 - 1
±50 ppm/ºC 10 - 10K 10 - 10K 10 - 10K 10 - 10K
TR50 TO-220 50W 3W 350V ±100 ppm/ºC 10 - 10K 3.01 - 10K 3.3 - 10K 3.3 - 10K
±200 ppm/ºC 10 - 10K 3.01 - 10K 3.3 - 10K 3.3 - 10K
±300 ppm/ºC - 1.02 - 3 1.1 - 3 1.1 - 3
TR50H TO-220 50W 2.25W 420V
(2) - - 0.1 - 1 0.1 - 1
±50 ppm/ºC - 10 - 10K 10 - 10K 10 - 10K
±100 ppm/ºC - 3.01 - 10K 3.3 - 10K 3.3 - 10K
TR100 TO-247 100W 3.5W 700V ±200 ppm/ºC - 3.01 - 10K 3.3 - 10K 3.3 - 10K
±300 ppm/ºC - 1.02 - 3 1.1 - 3 1.1 - 3
(2) - - 0.05 - 1 0.05 - 1
(1) Lesser of √PR or maximum working voltage
(2) Unspecified TCR. Contact Factory.
(3) The case temperature is to be used for the definition of the applied power limit. Refer to Power Derating Curve.

Environmental Characteristics
Specification
Test Item Test Method
TR20/30/35/50/50H TR100
2 times rated power with applied voltage not to exceed 1.5 times
Short Time Overload ∆R ± (0.3% + 0.001Ω) ∆R ± (0.5% + 0.001Ω)
maximum continuous operating voltage for 5 seconds
Load Life ∆R ± (1% + 0.001Ω) ∆R ± (1% + 0.001Ω) MIL-R-39009, 2000 hours at rated power
Moisture Resistance ∆R ± (0.5% + 0.001Ω) ∆R ± (0.5% + 0.001Ω) MIL-STD-202, Method 103B
Thermal Shock ∆R ± (0.3% + 0.001Ω) ∆R ± (0.5% + 0.001Ω) MIL-STD-202, Method 107G
Terminal Strength ∆R ± (0.2% + 0.001Ω) ∆R ± (0.2% + 0.001Ω) MIL-STD-202, Method 211, Condition A (Pull Test) 2.4N
Vibration, High Frequency ∆R ± (0.2% + 0.001Ω) ∆R ± (0.4% + 0.001Ω) MIL-STD-202, Method 204, Condition D
Dielectric Strength 1800VAC
Insulation Resistance 10GΩ min.

Operating Temperature Range: -65ºC to + 150ºC (TR20/TR30/TR50/TR50H)

-65ºC to + 175ºC (TR35/TR100)

Rev Date: 03/14/2012 1 [Link]

This specification may be changed at any time without prior notice marketing@[Link]
Please confirm technical specifications before you order and/or use.
TR Series Stackpole Electronics, Inc.
TO-220 and TO-247 Style Power Resistor Resistive Product Solutions

Mechanical Specifications
Type
TR20 TR30 TR35 TR50 TR50H TR100 Unit
Code
0.410 ± 0.010 0.410 ± 0.010 0.400 ± 0.010 0.410 ± 0.010 0.410 ± 0.010 0.620 ± 0.010 inches
A
10.41 ± 0.26 10.41 ± 0.26 10.16 ± 0.25 10.41 ± 0.26 10.41 ± 0.26 15.75 ± 0.26 mm
0.640 ± 0.010 0.640 ± 0.010 0.581 ± 0.010 0.640 ± 0.010 0.640 ± 0.010 0.815 ± 0.010 inches
B
16.26 ± 0.26 16.26 ± 0.26 14.75 ± 0.25 16.26 ± 0.26 16.26 ± 0.26 20.70 ± 0.26 mm
0.125 ± 0.010 0.125 ± 0.010 0.175 ± 0.015 0.125 ± 0.010 0.125 ± 0.010 0.195 ± 0.010 inches
C
3.18 ± 0.26 3.18 ± 0.26 4.44 ± 0.38 3.18 ± 0.26 3.18 ± 0.26 4.95 ± 0.26 mm
0.050 ± 0.005 0.050 ± 0.005 0.050 ± 0.005 0.050 ± 0.005 0.050 ± 0.005 0.143 ± 0.007 inches
D
1.27 ± 0.13 1.27 ± 0.13 1.27 ± 0.13 1.27 ± 0.13 1.27 ± 0.13 3.63 ± 0.18 mm
0.030 ± 0.004 0.030 ± 0.004 0.031 ± 0.003 0.030 ± 0.004 0.030 ± 0.004 0.060 ± 0.004 inches
E
0.76 ± 0.10 0.76 ± 0.10 0.78 ± 0.08 0.76 ± 0.10 0.76 ± 0.10 1.52 ± 0.10 mm
0.200 ± 0.010 0.200 ± 0.010 0.200 ± 0.010 0.200 ± 0.010 0.200 ± 0.010 0.400 ± 0.010 inches
F
5.08 ± 0.26 5.08 ± 0.26 5.08 ± 0.26 5.08 ± 0.26 5.08 ± 0.26 10.16 ± 0.26 mm
0.130 ± 0.030 0.130 ± 0.030 0.130 ± 0.030 0.130 ± 0.030 0.130 ± 0.030 0.110 ± 0.030 inches
G
3.30 ± 0.76 3.30 ± 0.76 3.30 ± 0.76 3.30 ± 0.76 3.30 ± 0.76 2.79 ± 0.76 mm
0.500 ± 0.050 0.500 ± 0.050 0.539 ± 0.039 0.500 ± 0.050 0.500 ± 0.050 0.570 ± 0.050 inches
H
12.70 ± 1.27 12.70 ± 1.27 13.70 ± 1.00 12.70 ± 1.27 12.70 ± 1.27 14.48 ± 1.27 mm
0.020 ± 0.004 0.020 ± 0.004 0.024 ± 0.003 0.020 ± 0.004 0.020 ± 0.004 0.032 ± 0.010 inches
J
0.50 ± 0.10 0.50 ± 0.10 0.62 ± 0.08 0.50 ± 0.10 0.50 ± 0.10 0.81 ± 0.26 mm
0.070 ± 0.010 0.070 ± 0.010 0.090 ± 0.010 0.070 ± 0.010 0.070 ± 0.010 0.095 ± 0.010 inches
K
1.78 ± 0.26 1.78 ± 0.26 2.28 ± 0.25 1.78 ± 0.26 1.78 ± 0.26 2.41 ± 0.26 mm
0.125 ± 0.004 0.144 ± 0.004 0.125 ± 0.004 0.143 ± 0.007 inches
M - -
3.18 ± 0.10 3.65 ± 0.10 3.18 ± 0.10 3.63 ± 0.18 mm
0.125 ± 0.010 0.116 ± 0.004 0.125 ± 0.010 0.210 ± 0.010 inches
N - -
3.18 ± 0.26 2.95 ± 0.10 3.18 ± 0.26 5.33 ± 0.26 mm
0.051 ± 0.004 inches
O - - - - -
1.30 ± 0.10 mm
0.240 ± 0.004 inches
P - - - - -
6.10 ± 0.10 mm

Mounting Note:
(1) When mounting ensure entire ceramic portion of case is mounted on a clean, flat heat sink with an
appropriate thermal interface, such as thermal grease. For screw mounting use of a compression washer
at a force of 150 to 300lbs (665 to 1330N) is recommended without exceeding mounting torque of 8 in-lbs
(0.9 N-m) to avoid package damage. For clip mounting use of a round or smooth clip in contact area is
recommended to avoid a concentrated hot spot on package.
(2) TR50/100 must be mounted to heat sink using proper mounting clip for efficient heat dissipation.

Rev Date: 03/14/2012 2 [Link]

This specification may be changed at any time without prior notice marketing@[Link]
Please confirm technical specifications before you order and/or use.
TR Series Stackpole Electronics, Inc.
TO-220 and TO-247 Style Power Resistor Resistive Product Solutions

Power Derating Curve:

100

80
Power Ratio (%)

60
TR20/TR30/TR50/TR50H
40
TR35/TR100

20

0
0 25 50 75 100 125 150 175
Case Temperature

How to Order
1 2 3 4 5 6 7 8 9 10 11

T R 2 0 F B D 1 K 0 0

Product Series Size Power Tolerance Packaging TCR Resistance Value

TR Standard 20 20W Code Tol Code Description Size Quantity Code ppm
Four characters with
30 30W D 0.5% 20, 30, 50, 50H 1,000 - unspecified
the multiplier used as
35 35W F 1% B Bulk 100 600(1) C 50
the decimal holder.
50 50W J 5% 35 500 D 100
50H 50W K 10% L 200 11 ohm = 11R0
100 100W M 300 1 Kohm = 1K00
10 Kohm = 10K0
(1) Contact Factory for smaller quantities.

Legacy Part Number (before January 3, 2011):

Nominal
SEI Type Code TCR Resistance Tolerance Packaging

TR 20 T1 1K 1% B
Type Description Code Wattage Code TCR Tolerance Style Qty Description Code
TR Standard 20 20W - Unspecified ±0.5% 20, 30, 50, 50H 1,000
30 30W T2 50 ppm ±1% 100 600(1) Box B
35 35W T1 100 ppm ±5% 35 500
50 50W T0 200 ppm ±10%
50H 50W
100 100W

(1) Contact Factory for smaller quantities.

Rev Date: 03/14/2012 3 [Link]

This specification may be changed at any time without prior notice marketing@[Link]
Please confirm technical specifications before you order and/or use.