Web Sample Tools & Support
page & buy software & FAQ Document 1575-1
Shielded Power Inductors – XGL4030
Halogen • Industry’s lowest DCR and ultra low AC losses over a wide
Free frequency range
• AEC-Q200 qualified
• Superior current handling with soft saturation characteristics
• Wide inductance range up to 12 µH
AEC
Q200 +125°C
Core material Composite
Core and winding loss See [Link]/coreloss
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver (96.5/3.5) over copper. Other
terminations available at additional cost.
Weight: 0.27– 0.30 g
Operating voltage: 80 V7
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Packaging 500/7″ reel; 2000/13″ reel Plastic tape: 12 mm wide,
0.23 mm thick, 8 mm pocket spacing, 3.25 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Inductance2 DCR (mOhms)3 SRF typ4 Isat (A)5 Irms (A)6
Part number1 ±20% (µH) typ max (MHz) 10% drop 20% drop 30% drop 20°C rise 40°C rise
XGL4030-450ME_ 0.045 0.67 0.8 680 17.9 30.0 42.5 25.0 36.0
XGL4030-131ME_ 0.13 1.5 1.8 265 12.5 19.5 26.5 21.0 27.0
XGL4030-271ME_ 0.27 2.2 2.4 160 9.2 14.4 19.3 17.5 24.2
XGL4030-301ME_ 0.30 2.5 2.9 130 8.0 12.5 17.0 17.0 24.0
XGL4030-401ME_ 0.40 2.8 3.2 120 7.2 11.5 15.5 15.5 22.5
XGL4030-471ME_ 0.47 3.4 3.9 100 6.8 10.6 14.2 15.3 21.2
XGL4030-621ME_ 0.62 4.1 4.6 82 6.1 9.5 12.7 12.5 15.0
XGL4030-761ME_ 0.76 4.9 5.5 72 5.6 8.7 11.8 12.3 14.2
XGL4030-102ME_ 1.0 6.5 7.2 65 4.8 7.6 10.3 10.8 13.0
XGL4030-122ME_ 1.2 8.5 9.4 55 4.2 6.8 9.2 9.5 12.2
XGL4030-152ME_ 1.5 9.5 10.5 50 3.8 6.3 8.8 7.0 10.2
XGL4030-222ME_ 2.2 13.5 15.0 40 3.1 5.0 7.0 5.8 8.7
XGL4030-332ME_ 3.3 19.9 21.9 30 2.4 3.8 5.3 5.4 7.5
XGL4030-472ME_ 4.7 28.5 31.5 26 2.1 3.2 4.4 4.8 6.6
XGL4030-562ME_ 5.6 31.5 34.7 25 2.0 3.1 4.2 4.0 5.5
XGL4030-682ME_ 6.8 43.5 47.9 22 1.8 2.7 3.7 3.5 4.7
XGL4030-822ME_ 8.2 50.6 55.7 20 1.65 2.55 3.5 3.1 4.2
XGL4030-103ME_ 10.0 63.0 69.5 18.5 1.4 2.3 3.1 2.9 3.9
XGL4030-123ME_ 12.0 78.5 86.5 17.0 1.35 2.05 2.7 2.5 3.4
1. When ordering, please specify termination and packaging codes: 6. Current that causes the specified temperature rise from 25°C ambient.
This information is for reference only and does not represent absolute
XGL4030-123MEC maximum ratings. Click for temperature derating information.
Termination: E = RoHS compliant tin-silver over copper. 7. Voltage capability varies by part number and in many cases may be
Special order: T = RoHS tin-silver-copper higher than the listed voltage.
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37). 8. Electrical specifications at 25°C.
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
tape. Quantities less than full reel available: in tape
(not machine ready) or with leader and trailer ($25
charge). Irms Testing
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked. Irms testing was performed on 0.75 inch wide ×
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc. 0.25 inch thick copper traces in still air.
3. DCR measured on a micro-ohmmeter. Temperature rise is highly dependent on many factors
4. SRF measured using Agilent/HP 4395A or equivalent. including pcb land pattern, trace size, and proximity to
5. DC current at 25°C that causes the specified inductance drop from its other components. Therefore temperature rise should
value without current. be verified in application conditions.
Click for temperature derating information.
Specificationssales@[Link]
US +1-847-639-6400 subject to change without notice. Document 1575-1 Revised 06/27/25
Please check our
UK +44-1236-730595 website for latest information.
sales@[Link] © Coilcraft Inc. 2025
Taiwan +886-2-2264 3646 sales@[Link] This product may not be used in medical or high
risk applications without prior Coilcraft approval.
China +86-21-6218 8074 sales@[Link] Specification subject to change without notice.
Singapore + 65-6484 8412 sales@[Link] Please check web site for latest information.
Document 1575-2
Shielded Power Inductors – XGL4030
L vs Current
Inductance (µH)
Halogen
Free
AEC
Q200 +125°C Current (A)
0.20
Inductance (µH)
Inductance (µH)
0.10
Current (A) Current (A)
Inductance (µH)
Inductance (µH)
Current (A) Current (A)
Inductance (µH)
Inductance (µH)
Current (A) Current (A)
Inductance (µH)
Inductance (µH)
Current (A) Current (A)
US +1-847-639-6400 sales@[Link] Document 1575-2 Revised 06/27/25
UK +44-1236-730595 sales@[Link] © Coilcraft Inc. 2025
Taiwan +886-2-2264 3646 sales@[Link] This product may not be used in medical or high
risk applications without prior Coilcraft approval.
China +86-21-6218 8074 sales@[Link] Specification subject to change without notice.
Singapore + 65-6484 8412 sales@[Link] Please check web site for latest information.
Document 1575-3
Shielded Power Inductors – XGL4030
L vs Current
Inductance (µH)
Inductance (µH)
Halogen
Free
AEC
Q200 +125°C
Current (A) Current (A)
Inductance (µH)
Current (A) Inductance (µH)
Inductance (µH) Current (A)
Inductance (µH)
Current (A) Current (A)
Inductance (µH)
Inductance (µH)
Current (A) Current (A)
Inductance (µH)
Current (A)
US +1-847-639-6400 sales@[Link] Document 1575-3 Revised 06/27/25
UK +44-1236-730595 sales@[Link] © Coilcraft Inc. 2025
Taiwan +886-2-2264 3646 sales@[Link] This product may not be used in medical or high
risk applications without prior Coilcraft approval.
China +86-21-6218 8074 sales@[Link] Specification subject to change without notice.
Singapore + 65-6484 8412 sales@[Link] Please check web site for latest information.
Document 1575-4
Shielded Power Inductors – XGL4030
Typical L vs Frequency
Halogen
Free
AEC
Q200 +125°C
US +1-847-639-6400 sales@[Link] Document 1575-4 Revised 06/27/25
UK +44-1236-730595 sales@[Link] © Coilcraft Inc. 2025
Taiwan +886-2-2264 3646 sales@[Link] This product may not be used in medical or high
risk applications without prior Coilcraft approval.
China +86-21-6218 8074 sales@[Link] Specification subject to change without notice.
Singapore + 65-6484 8412 sales@[Link] Please check web site for latest information.
