AirMagnet Survey PRO 9.2.

1
Release Notes
April 2018

Table of Contents
 Introduction .................................................................................................................................... 1
 Special Notes .................................................................................................................................. 1
 New Features in v9.2.1 .................................................................................................................. 2
 New Features in v9.2.0 .................................................................................................................. 4
 New Features in v9.1.1 .................................................................................................................. 5
 New Features in v9.1 ..................................................................................................................... 6
 New Features in v9.0 ..................................................................................................................... 8
 System Requirements ................................................................................................................... 9
 Supported Site Map Image Formats............................................................................................ 9
 Guideline for Use of Wi-Fi Adapters ............................................................................................ 9
 Limitations of Other Network Adapters.................................................................................... 10
 Bug Fixes ....................................................................................................................................... 10
 Known Issues ................................................................................................................................ 13
 Release History ............................................................................................................................. 13
 Technical Support ........................................................................................................................ 14

Introduction
AirMagnet Survey PRO is a powerful, easy-to-use WLAN site survey tool that empowers WLAN professionals
with everything they need to plan and survey any 802.11 a/b/g/n/ac wireless network.
This Release Notes highlights issues addressed in the 9.2.1 release in addition to the new features and major
known issues in the previous AirMagnet Survey PRO 9.x releases. It also provides basic instructions and
important notes regarding the installation and operation of the software.

Special Notes
 You must uninstall any previous version of AirMagnet Survey using the Control Panel before installing
the released version of Survey PRO/Planner 9.2.1. Do not use the ‘Repair’ function. Using Repair has
resulted in unreliable performance in some versions of Windows.
 Note when installing on Windows 7, 8, 8.1, or 10 it is highly recommended to install all available
Microsoft updates before installing and running AirMagnet Survey.

Page 1 of 14 AirMagnet Survey PRO 9.2.1

Release Notes
SVY-v9.2.1-4/27/2018
  Survey PRO 8.8 and later releases use the .svdx file extension for survey data files, which is different
from the .svd file extension used in all previous releases. It is important to note that you cannot
open .svdx files in any previous version of Survey PRO. If you’ve done a survey using Survey PRO
v8.8 or later, you MUST open the survey data (.svdx) file in Survey PRO 8.8 or later. You can still
open or import survey projects and data files saved in .svd format from earlier versions of the
application. However, when you open an .svd file for the first time in Survey PRO 8.8 or later, the
application will first convert the file to the new .svdx file format. The conversion may take longer than
just opening a file. You can view the progress of the conversion from the progress bar at the bottom
of the screen.
 Survey PRO 8.8 and later use a ‘tiling’ mechanism for determining the smallest ‘square’ of space to
color on a heatmap. The tile size is determined by the overall dimensions of the floorplan. For very
large sites, this may result in a blocky look to the heatmap when zoomed in to look at small areas.
To counteract this, a new feature has been added to display heatmaps with increased granularity.
This feature is covered in the New Features section below.
 For AP-on-a-stick surveys performed in previous versions of Survey, in which multiple surveys were
performed using the same AP, NETSCOUT recommends merging the survey files in Survey PRO 8.7.*
first and then converting them to .svdx format in Survey PRO 9.1 or later. This preserves AP alias names
as unique for each source survey.
 When using any of the USB wireless adapters, you may need to re-create the wireless profiles when
plugging the same adapter into a different USB port. This is because wireless profiles are stored based
on the port, not the adapter itself.
 You must have a Cisco “Plus” license to use the Cisco Prime Infrastructure feature.
 To use 802.11ac USB adapters with this AirMagnet Survey PRO 9.2.1 release, you must have the
following versions of the Microsoft Windows operating system:
 Microsoft® Windows 7 Enterprise/Professional/Ultimate 64-bit
 Microsoft Windows 8 Pro/Enterprise 64-bit
 Microsoft Windows 8.1 Pro/Enterprise 64-bit
 Microsoft Windows 10 Pro/Enterprise 64-bit
 When performing AP-on-a-stick active surveys with an 802.11ac adapter, NETSCOUT recommends the
following configuration scenarios:

Scenario AP Configuration Gateway Configuration Adapter Configuration

1 DHCP server Yes (using AP’s IP address) DHCP

2 DHCP server No, not configured DHCP

3 Not configured as DHCP server; No, not configured Static IP Address (within AP’s IP
static IP address assigned to AP address range)

New Features in v9.2.1

 Ability to Perform a Survey with any Windows based Wi-Fi Adapter...................................... 3
 Ability to Combine Multiple Parallel Walls Together with AWE ............................................... 3
 New Antenna Patterns .................................................................................................................. 3

Page 2 of 14 AirMagnet Survey PRO 9.2.1

Release Notes
SVY-v9.2.1-4/27/2018
Perform a Survey with any Windows-based Wi-Fi Adapter
This release adds the ability to perform a survey with any Windows-based Wi-Fi adapter.
When using these adapters, please be aware of the following:
• Noise and SNR measurements are not available on these adapters. Survey PRO will indicate -100 dB
when using these adapters.
• As USB 3.0 signaling is known to cause interference in the 2.4-GHz band, AirMagnet Survey PRO will
force adapters to USB 2.0 operation. Windows will occasionally take time to switch operating modes
and reload an adapter if the mode chosen is not the mode the card initially comes up as.
• PHY Data Rate Up is not available for an Active survey. PHY Data Rate Down is provided instead.
• These adapters will use the vendors’ drivers.
• These adapters have not been tested by NETSCOUT; thus, they may not work as expected or may
provide inaccurate information. It is important to note that NETSCOUT is not responsible for the
quality of the test results collected using these adapters.

Combine Multiple Parallel Walls Together with AWE

This release adds the ability to automatically combine multiple parallel walls together while using the
Automatic Wall Extraction (AWE) tool to extract the layers from a CAD drawing.

New Antenna Patterns

This Survey PRO 9.2.1 release adds the following antenna patterns.

Vendor Antenna Pattern

AccelTex ATS-OP-245-6-4RPTP-36
ATS-OP-245-13-4RPTP-36

Aerohive 550

Aruba AP-305

Meraki MR33
MR42
MR53
MR66 ANT-10
MR66 ANT-11
MR66 ANT-13
MR72 ANT-20
MR72 ANT-21
MR72 ANT-23
MR72 ANT-25

Ruijie AP530
AP130

WatchGuard AP325

Page 3 of 14 AirMagnet Survey PRO 9.2.1

Release Notes
SVY-v9.2.1-4/27/2018
New Features in v9.2.0
 Support for new 802.11ac USB adapters.................................................................................... 4
 New Antenna Patterns .................................................................................................................. 4

Support for new 802.11ac USB adapters

This release adds support for the following 802.11ac USB adapters:

Vendor Adapter Model

NETSCOUT  NETSCOUT AM/D1080

Proxim  Proxim Orinoco 9100

Edimax  Edimax EW-7833UAC AC1750

Alfa  Alfa AWUS1900

When using these adapters, please be aware of the following:

• Noise and SNR measurements are not available on these 802.11ac adapters. Survey PRO will not
indicate noise values when using these adapters accordingly.
• As USB 3.0 signaling is known to cause interference in the 2.4-GHz band, AirMagnet Survey PRO will
force the adapter to USB 2.0 operation. Windows will occasionally take time to switch operating modes
and reload an adapter if the mode chosen is not the mode the card initially comes up as.
• PHY Data Rate Up is not available for an Active survey. PHY Data Rate Down is provided instead.
• To utilize these adapters, installation of the NETSCOUT driver is required. After installing the
application, navigate to the chosen installation folder. You will find a sub-folder there titled
NTCTUSBDriverInstaller. Run setup.exe within that folder to install NETSCOUT’s preferred driver.

New Antenna Patterns

This Survey PRO 9.2.0 release adds the following antenna patterns.

Vendor Antenna Pattern

Fortinet FortiAP 221C

HP HP JG696A

Juniper WLA-ANT5007-OUT

Ruckus C110
H510
R610
T610
AT-2401-DP
AT-0005-VP
AT-1212-DP

Page 4 of 14 AirMagnet Survey PRO 9.2.1

Release Notes
SVY-v9.2.1-4/27/2018
 AT-2101-DP

TP-LINK EAP245

Watchguard AP322

New Features in v9.1.1

 AP Alias Enhancements ................................................................................................................. 5
 Merging Surveys Without Merging Spectrum Data ................................................................... 5
 New Antenna Patterns .................................................................................................................. 6

AP Alias Enhancements
AP Alias names are now tied to your project folder and can be easily transferred if you zip up a project folder
and share it with someone else. This eliminates the need to copy files into/out of your system directory if you
want to pass along alias names.
Additionally, when defining a user-friendly Alias for APs in a survey, you can now select from two options for
how Survey will treat this alias: Project or Survey. The Survey alias takes precedence over the Project alias.
A Project level alias will be applied to all APs with that MAC address found in any surveys in the project. This
is essentially the same as how AP Alias names worked in previous releases.
A Survey level alias will only be applied to APs with that MAC address in a single survey file. It will not apply
that alias to any other surveys within the same project. A survey level alias is most valuable when conducting
AP-on-a-Stick surveys where multiple surveys will have the same MAC but are being treated as separate
entities.
When merging AP-on-a-Stick surveys that have Survey level AP Alias names, the following sequences should
be followed:
1. Conduct the individual survey(s) for a specific location.
a. If more than one survey is conducted for a given ‘Stick’ location, these surveys should be
merged before any AP Alias is applied.
2. Apply an AP Alias for the AP in the location’s survey.
3. Repeat steps 1 and 2 as necessary until all ‘Stick’ locations have been completed.
4. Perform a single merge of all ‘Stick’ level surveys to create your merged site level AP-on-a-stick survey.
The individual unique survey AP Alias names will translate across to the merged survey.
Note that further merges of this final merge with other survey data may cause loss of AP Alias information. If
additional merging is necessary, it is recommended that a new component survey level merge (using all the
individual ‘Stick’ level surveys) be performed with any new survey data in a single merge to ensure AP Aliases
are correctly captured and persisted.

Merging Surveys Without Merging Spectrum Data

When AirMagnet Survey has Spectrum Integration turned on, a new option will be available when merging
surveys. There is now a check box in the merge dialog that asks if you would like to “Include spectrum data, if
available”. The option is on by default (the same as previous versions of AirMagnet Survey), but if turned off,
Page 5 of 14 AirMagnet Survey PRO 9.2.1
Release Notes
SVY-v9.2.1-4/27/2018
the resulting merge data will not merge and will not carry forward any spectrum data that may have been in
the component surveys. This can save time on merging in those cases where merged spectrum data is not
necessary for your analysis.

New Antenna Patterns

This Survey PRO 9.1.1 release adds the following antenna patterns.

Vendor Antenna Pattern

Aruba Aruba AP-ANT-40

Aruba AP-ANT-45

Aruba AP-ANT-48

Cisco Cisco AIR-ANT2588P3M-N

Cisco AIR-ANT2547VG-N
Cisco AIR-ANT2568VG-N
Cisco AIT-ANT5114P2M-N

Cisco Aironet 1810W

Mist Mist AP41

New Features in v9.1

• Automatic Wall Extraction .......................................................................................................................... 6
• Surveys without VoFi Analyzer ................................................................................................................... 6
• Display with Increased Granularity ........................................................................................................... 7
• New Antenna Patterns ................................................................................................................................ 7

Automatic Wall Extraction

Drawing walls in a floorplan can be a tedious and time-consuming task. AirMagnet Survey PRO release 9.1
allows you to automatically import walls from a CAD image of your building, dramatically reducing the time it
takes to prepare a floorplan.
Each CAD layer can be individually selected for extraction and given a unique attenuation type to get the most
accurate model possible for the site. Extraction allows you to choose as many or as few layers as needed. All
the same wall attenuation types that are available in Planner for manual wall placement are available for CAD
extracted walls.

VoFi Surveys without VoFi Analyzer

As of AirMagnet Survey PRO release 9.1, VoFi surveys can now be conducted without an installed copy of VoFi
Analyzer being present. VoFi surveys can be helpful in troubleshooting problem areas in a VoFi deployment;
they can provide details about the active call such as WiMOS, roaming frequency, and signal strength.
VoFi surveys gather data from an active connection between a wireless AP and a VoFi phone. To establish this
connection, you generate a call between two phones (one of which must be a VoFi phone; the other may be
VoFi or wired) before attempting to start the survey. Once Survey detects the call, you can start collecting the
Page 6 of 14 AirMagnet Survey PRO 9.2.1
Release Notes
SVY-v9.2.1-4/27/2018
survey data. With the differences between individual VoFi phones, you must provide some configuration
information in order to ensure that Survey can properly interpret the data received from VoFi surveys. This
process consists of you creating VoFi phone profiles within Survey’s phonebook that correspond to the types
of phones in use (or expected to be in use) on the VoFi deployment.
Be aware that Softphones may not be detected since they may not generate enough traffic to allow call
detection.
Refer to the User Guide for additional specific configuration information relative to conducting VoFi surveys.

Display with Increased Granularity

Survey PRO 8.8 and later use a ‘tiling’ mechanism for determining the smallest ‘square’ of space to color on a
heatmap. The tile size is determined by the overall dimensions of the floorplan. For very large sites, this may
result in a blocky look to the heatmap when zoomed in to look at small areas. Surveys of large sized sites
can now be opened in Increased Granularity mode to counteract this. The increased granularity will be
visible in the Display screen, as well as any reports generated while the survey is set to Increased
Granularity.
To open a survey in increased granularity, right click the survey in the survey list while in the Display screen
and select “Open with Increased Granularity”. The survey data will now be recalculated with a smaller tile
size. When using the Increased Granularity feature, please be aware of the following:
• Calculating heatmaps will take longer than with standard granularity and will be more pronounced
in some heatmaps over others. Channel Interference takes a large amount of memory to calculate
and may become slow to load when using Increased Granularity. If Survey generates an ‘Out of
Memory’ message, you will need to reload the survey in Standard Granularity to view that heatmap.
• If you enter AirWISE while your data is in Increased Granularity, you may see slightly different
percentage values than when in Standard Granularity. This is expected behavior as the increased
granularity can influence how much overall area meets a given cutoff value.
• DiffView and MultiView automatically re-open all projects in Standard Granularity. This will force you
to re-open your project in Increased Granularity when you return to Display. It is recommended that
any necessary Display work be done before moving to DiffView or MultiView to save time in
recalculating data.
• Simulation view is incompatible with Increased Granularity; the memory burden on most systems
results in severely deprecated performance. If you need to use Simulation, open the project in
Standard Granularity first.

New Antenna Patterns

This Survey PRO 9.1 release adds the following antenna patterns.

Vendor Antenna Pattern

AccelTex AccelTex ATS-OP-245-47-4RPSP-36

Aruba Aruba AP 320

Aruba AP 325 – Update

Aruba AP 225 – Update

Cisco Cisco AIR-ANT2566D4M-R

Cisco AIR-ANT2566P4M-R

Meraki ANT-21

Page 7 of 14 AirMagnet Survey PRO 9.2.1

Release Notes
SVY-v9.2.1-4/27/2018
 Vendor Antenna Pattern

Meraki ANT-20
Meraki ANT-23
Meraki ANT-25

Watchguard Watchguard AP 320

Watchguard AP 120

New Features in v9.0

 Survey Mobile ................................................................................................................................. 8
 CAD Layer Viewing ......................................................................................................................... 8
 Disable Headers / Footers in Reports ......................................................................................... 8
 Automatic AP Numbering ............................................................................................................. 8
 Improved Wall Selection ............................................................................................................... 8

Survey Mobile
AirMagnet Survey PRO release 9.0 provides you with NETSCOUT’S Android-based survey tool Survey Mobile.
Survey Mobile allows you to quickly and easily conduct surveys on Android phones or tablets. This allows data
to be collected on lower end BYOD/consumer grade devices to see how these devices will experience the
network. Once your survey is complete, just email the project from your handheld device, and open the
project (.svd file) in AirMagnet Survey PRO for deeper survey analysis and reporting.
You can find the .apk file for this software in your Survey PRO installation directory.

CAD Layer Viewing

When importing a DWG image, you can now select which specific layers within the CAD drawing you would
like to view within Survey. This can cut down on clutter and make CAD files much easier to work with.

Disable Headers/Footers in Reports

This release adds the ability to enable and disable the header and footer areas within a generated report.
This allows multiple reports to be combined to create a master report without having contradictory
header/footer information.

Automatic AP Numbering
This release adds an automatic renumbering feature to access points placed within Planner. If APs are deleted
or removed during the course of planning, the renumbering button now allows all APs to be renumbered
without missing AP numbers

Improved Wall Selection

Holding the shift key along with the select icon now allows you to select all wall objects that fall completely
within the selection area. These objects can then be moved or deleted as a group.

Page 8 of 14 AirMagnet Survey PRO 9.2.1

Release Notes
SVY-v9.2.1-4/27/2018
System Requirements
Laptop/Notebook PC/Tablet PC
 Operating Systems: Microsoft® Windows 7 Enterprise/Professional/Ultimate or Microsoft Windows 8
Pro/Enterprise 64-bit, Microsoft Windows 8.1 Pro/Enterprise 64-bit, or Microsoft Windows 10
Pro/Enterprise 64-bit.
 Intel® Core™ 2 Duo 2.00 GHz (Intel® Core™ i5 or higher recommended).
 4 GB memory or higher.
 800 MB free HDD or SSD space.
 AirMagnet-supported wireless network adapter(s).
 USB port or ExpressCard slot for external adapter use.
 When using multiple adapters, AirMagnet recommends the use of its multi-adapter kit. Otherwise,
multiple slots/ports in the PC are required.
 Optional AirMagnet Spectrum XT adapter and license for integrated spectrum survey on Survey PRO.
This is required for viewing spectrum data and heat map.
 Google Earth must be installed to export the GPS data for outdoor surveys to Google Earth (Survey
PRO only).

Apple® MacBook® Pro

 Operating Systems: MAC OS X v10.9 or higher running a supported Windows OS (as noted under the
Laptop/Notebook PC/Tablet PC section) using Boot Camp®.
 Intel®-based CPU 2.0 GHz or higher.
 4 GB memory or higher.
 800 MB free HDD or SSD space.
 USB port for external adapter use.
 AirMagnet-supported wireless network adapter(s).
 Optional AirMagnet Spectrum XT adapter and license for integrated spectrum survey on Survey PRO.
This is required for viewing spectrum data and heat map.
 Google Earth must be installed to export the GPS data for outdoor surveys to Google Earth (Survey
PRO only).
 When using multiple adapters, AirMagnet recommends the use of its multi-adapter kit. Otherwise,
multiple slots/ports in the MacBook® Pro are required.

Supported Site Map Image Formats

.bmp, .dib, .dwf, .dwg, dxf, .emf, .gif, .vsd, .jpg, .wmf, .vdx, and .png.

Guideline for Use of Wi-Fi Adapters

AirMagnet Survey/Planner requires that a Wi-Fi adapter be installed on the same computer running the
application to capture Wi-Fi data.

Page 9 of 14 AirMagnet Survey PRO 9.2.1

Release Notes
SVY-v9.2.1-4/27/2018
AirMagnet mobile products categorize Wi-Fi adapters into the following types:
 Preferred Adapters: These adapters have been tested by AirMagnet and are recommended for use
with AirMagnet products. Drivers have been customized for extended feature support. For a
complete, up-to-date listing of AirMagnet Preferred wireless adapters, visit
http://enterprise.netscout.com/products/airmagnet-survey.
 Other Adapters: These adapters can be used with AirMagnet Survey PRO but have not been tested
by AirMagnet. Drivers have not been customized, will provide limited features, and could provide
inaccurate data.
Note: When installing Intel® and USB adapters, it is important that you uncheck the option to install the
adapter’s client utility in addition to the driver software.

Limitations of Other Network Adapters

Any 802.11 adapter supported by Windows other than the Preferred Adapters falls into the Other network
adapters category. They can be used with AirMagnet Survey PRO to perform a survey but have not been tested
by AirMagnet. These adapters’ drivers have not been customized, provide limited feature support, and could
provide inaccurate information. It is important to note that NETSCOUT is not responsible for the quality
of the test results collected using these adapters.
The following are noted limitations of generic adapters in AirMagnet Survey.
 No ability to scan specific channels: all channels are scanned. There is no Scan or 802.11 tab under
the File>Configure menu.
 No noise or signal-to-noise ratio (SNR) measurements.
 Measured PHY data rates in the uplink and downlink directions are not separated. Only a single PHY
data rate for the connection is reported.
 No packet retry and loss measurements on active and Iperf surveys.
 Iperf throughput performance may vary, depending on the model of the generic adapter in use.
 Limitations in the wireless channels that they scan: They may only be able to scan channels that are
approved for wireless use in a specific country, and unable to scan channels assigned as Dynamic
Frequency Selection (DFS) channels.
 Only one 802.11ac adapter can be used when utilizing multiple adapters. Refer to “Utilizing Multiple
Adapters” in the AirMagnet Survey User Guide.
 There is no roaming control for active and Iperf surveys.
 Due to the inability to disable roaming on the adapter, only the “by SSID” (not by AP) method is
available for active and Iperf surveys.

Bug Fixes
This section covers the defects that have been fixed in this release.

Survey
Defect ID Description

DE16549 Reports languages: Mixed languages found in reports

Page 10 of 14 AirMagnet Survey PRO 9.2.1

Release Notes
SVY-v9.2.1-4/27/2018
DE17286 Active association issues with NETSCOUT driver

DE17435 Unable to get Garmin Etrex GPS to work with Survey

DE17284 Survey with spectrum integration enabled – application crash upon startup

DE16975 Intel 7260/7265: Positive Signal Strength Reported

DE17240 Atheros drivers error 52, digitally signed error / softload subsystem error

DE17468 No channel interference heatmap in Display Mode

DE17548 Active Survey report, WLAN Deployment Requirements: Incorrect Descriptions

DE17480 Overall Coverage Report by Channel: Incorrect Date/Time

DE17568 AirWISE not flushing Channel Interference cache when switching back to Display Mode

DE17633 Simulation Mode automatically powers Auto Positioned AP’s

DE17593 AirWISE: Refresh issue when using the band selection options

DE17648 Old driver installer included on the installation folder

DE16768 Legend switches from currently set to -70 dBm

DE16865 RF Spectrum report contains no heatmaps with VoFi Survey

DE16967 Inability to open Survey Projects using mapped networks drives in Windows 10

DE17086 Crash when moving placed AP’s

DE17091 Adding an AP in Simulation results in Measured UP data type in Display mode

DE17100 Legend for the Individual PHY Data Rate heatmaps is on the following page

DE17113 Adapter stops seeing traffic after performing multiple surveys

DE17136 By default, some DFS channels are not checked in the Scan tab under Configure setting

DE17170 Application crash when disabling heat map

DE17373 Unable to run VoFi report on merged VoFi files

Planner
Defect ID Description

DE17533 Duplicate MAC Address has been Detected

DE17536 No heatmap data shown for Channel Overlap 802.11ac when using two or more 802.11ac 20MHz AP’s

DE17005 Extract Wall objects from CAD function is missing some wall segments

DE17489 AWE: Diagonal, parallel, or vertically oriented lines not combining

Survey Mobile
Defect ID Description

DE16074 Survey Mobile: crash when starting Survey

DE17439 Wi-Fi throughput test fails with default URL

DE17448 Crash when starting Survey Mobile

DE17449 Need to disconnect from the AP before running Connection Test

Page 11 of 14 AirMagnet Survey PRO 9.2.1

Release Notes
SVY-v9.2.1-4/27/2018
DE17665 Online Audio Test in User Experience failed

DE17666 Cannot load image from LinkRunner G2 camera

Previous 9.x Releases

Defect ID Description

DE16655 “A digitally signed driver is required” message pop-up after installation

DE9339 Spectrum Interferers go missing from the Display view Interferer Power heatmap after changing the RF
propagation radius.

DE9974 The legend on the Reports page doesn’t match the color bar adjustment options you select.

DE10023 Survey data collected with Calibration not tagged accordingly.

DE10388 Report AP count does not display correctly when the AP Grouping is enabled.

DE14197 AP-on-a-stick  During a data merge, AP alias name is overwritten.

DE14215 When creating an AirWISE report, the application uses the filter selection from the AirWISE view which
may not match the filter shown in the Report view.
DE14395 Channel Interference is not shown correctly in AirWISE or Display with AP Grouping enabled

DE14861 In reports, occasionally first time running a report results in the wrong number of APs shown.

DE14943 A Different Max Signal is shown in filtered survey data than in the original merged source.

DE15102 Channel interference is shown incorrectly for 20MHz channel APs in the 5GHz band.

DE15213 Cisco Location Service heatmap displays incorrectly in AirWISE.

DE15230 The heatmap changes when enabling or disabling AP grouping.

DE15404 Reporting misses AirWISE sections on first run.

DE15471 Cannot perform Active / Iperf surveys to an SSID which contains the & (ampersand) character.

DE15824 Checkbox for Select All 2.4GHz and 5GHz in the tree view does not show heat map when 5GHz selected.

DE15809 Reports cover sheet image cannot be changed in Portrait oriented reports.

DE15822 Crash when adding a floor plan to a Survey Project.

DE15824 Checkbox for Select All 2.4GHz and 5GHz in the tree view does not show heat map when 5GHz selected.

DE15891 Crash when exporting a project for Survey PRO.

DE15918, Digitally signed driver needed for secure operation on Windows 10 OS.
DE15937

DE15969 In reports, total SSIDs in reports section of AP Detail Breakdown is not accurate.

DE16071 Alias name not applied as expected for active surveys.

DE16114, Antenna correction for Aruba 225 & 325.

DE16115,
DE16116,
DE16117

DE16123 Placed AP icons are missing after merging (AP-on-a-Stick).

DE16254 AirWISE saved areas are not visible.

DE16312 Crash during survey data collection in certain circumstances.

Page 12 of 14 AirMagnet Survey PRO 9.2.1

Release Notes
SVY-v9.2.1-4/27/2018
 Defect ID Description

DE16467 Newly created plans do not get saved unless you modify the plan.

DE16514 Path is shifted and the incorrect size when viewing a project which was exported from Survey Mobile

Known Issues
This section documents the major known issues with this AirMagnet Survey 9.2.1 release.

Defect ID Description

DE16046 User interface issues with high resolution displays.

Workaround: Lower the display resolution to 1920 x 1080.
DE16286 No data saved for AP or Station when the Locate Station option is enabled.
Workaround: Disable the Locate Station option.
DE16373 Not all AP’s are included on the heatmap while using the Channel tab option.
Workaround: Use the SSID tab to select the AP’s to be included on the heatmap.
DE15630 A change in Region/Language causes the floor plan to shift.
Workaround: Open a project using the same Region/Language on which it was created.

DE11882 Unable to enter number of users when using the Arbitrary Region tool on AirWISE.

DE15465 AP’s are being placed in Planner as using channel 0 for the 2.4 GHz and 5 GHz bands when an AP is set to
default.
Workaround: Change any AP setting and then change that AP to Default and the behavior goes back to
expected, with the correct channels.
DE16977 AP name not showing up Aruba AP325.
DE15473 Active iPerf survey speeds show as being lower than expected when compared to a stand-alone iPerf
server.
DE15696 On the reports, colors don’t match between the Signal Distribution heatmap and its legend.
Workaround: Filter the data just to the SSID in question then run the report.

Release History
Release Month Release Version

04/2018 AirMagnet Survey PRO 9.2.1

07/2017 AirMagnet Survey PRO 9.2.0 (Build 36843)

03/2017 AirMagnet Survey PRO 9.1.1 (Build 36696)

12/2016 AirMagnet Survey PRO 9.1 (Build 36631)

09/2016 AirMagnet Survey PRO 9.0.1 (Build 36460)

08/2016 AirMagnet Survey PRO 9.0 (Build 36354)

Page 13 of 14 AirMagnet Survey PRO 9.2.1

Release Notes
SVY-v9.2.1-4/27/2018
Technical Support
If you need help with this AirMagnet Survey PRO 9.2.1 release, contact NETSCOUT Enterprise Solutions, as
follows:

Contact Venue Description

Web: http://enterprise.netscout.com/contact

E-mail: [email protected]

Phone: 1-888-357-7667

Note: International and global support phone numbers are available at http://enterprise.netscout.com/contact

Page 14 of 14 AirMagnet Survey PRO 9.2.1

Release Notes
SVY-v9.2.1-4/27/2018