Batting Technique

Every time a batsman faces a ball he must decide what shot, if any, to play at it. This decision is usually made in a split second, while the ball is travelling down the pitch towards him from the bowler's hand - although in some cases a shot can be premeditated. The type of shot played depends on several factors:

The pace of the ball. The line of the ball. The length of the ball. The age of the ball. The state of the pitch, and if it has deteriorated noticeably, producing irregular bounce. The known style of bowling used by the bowler, including any variations to that style. Whether the batsmen can pick the particular variety of ball being bowled. The placement of the fielders. The batsman's estimation of his own skill. How played in the batsman is - whether he is beginning his innings or has settled into a comfortable batting rhythm. The state of the game, and whether it is more appropriate to take risks in an attempt to score quickly, or to defend. Instructions from the captain on whether to bat aggressively or defensively. The time of day, in terms of how much play is remaining in the current session of play. The batting skill of the non-striker and the number of balls remaining in the over.

Usually, the most important goal is to not get out. Scoring runs is secondary. This can change if the game is in a situation where runs must be scored at a certain rate to avoid defeat or ensure victory. In baseball, the batter plants his feet firmly and For a batsman, the primary method of accommodating to the vagaries of any does not move particular ball is footwork. Once the batsman has judged the line and length them as he swings of the ball, he will shift his weight on to either his front foot or back foot. He the bat. In cricket, usually takes a quick step with the foot first before putting his weight on it, to the batsman moves position himself either further from or closer to his wicket. This step can also his feet deliberately be used to move across the pitch, to the off or leg sides, to accomodate the to better position line of the ball. himself to either hit the ball or avoid it. The goal of this shifting is to position the batsman so that he can either hit the ball comfortably, avoid the ball hitting his body, or allow the ball to pass by without touching it. Once set in position, the batsman should be able to do either of these as the situation demands.

Footwork

Hitting the Ball

In baseball, the batter does not adjust his swing much to account for different ball trajectories or tactics. A bunt or a deliberate sacrifice fly Attempting to hit the ball is called playing a shot or stroke at the are examples, or a good ball. There are several different types of shot, designed to batter choosing to hit an accommodate whatever the ball does. They can be classified in outside ball into the ground different ways: for a single while swinging harder at an inside ball for an Front foot shots are played with the front foot extended attempted home run. In down the pitch toward the bowler and the weight on the cricket, the batsman has a front foot. much wider variety of Back foot shots are played with the back foot pushed back responses to the ball toward the wicket and the weight on the back foot. trajectory. Footwork allows Straight bat shots are played with the bat held vertically. him to position himself with Cross bat shots are played with the bat held horizontally. respect to the ball and the bat Attacking shots are designed to hit the ball through the field can be swung in several and score runs. differently angled arcs to hit Defensive shots are designed to prevent getting out. the ball deliberately in almost any direction.

Front Foot Shots

Moving on to the front foot is generally done when the length of the ball is such that it pitches relatively close to the batsman's crease - from about 0.5 to 3 metres from the crease. Moving forward brings the batsman's front foot near the point where the ball will bounce, so that he can hit it on the half volley, as it rises from the pitch. This gives the ball little chance to deviate from its line, so makes it easier to hit the ball cleanly.

Front foot defensive. This is played by moving the front foot forward down the pitch, placing the foot just inside the line of the ball. The back foot generally remains still and the front knee bends as the front foot takes the batsman's weight. The bat is brought down vertically, parallel to the front shin, and right next to it, in the line of the ball. The aim is not to swing the bat, but to place it as an obstacle to block the ball. The bat should be angled downwards so the ball bounces off it and drops straight down to the pitch, rather than bouncing up into the air where it might be caught. The hands grip the bat loosely to further absorb the impact of the ball and prevent it from bouncing in the air, a technique known as soft hands. The toe of the bat should be on or close to the pitch, because the ball will generally be low in its trajectory when it hits the bat. The front foot defensive is also known as a block. The front foot defensive is designed to prevent the ball from hitting the wicket and getting the batsman out bowled. The front leg is positioned right next to the bat so there is no appreciable gap between them. This is to prevent the ball deviating inwards and slipping between the bat and pad. There is some danger in this shot if the ball deviates from its line significantly. If the ball deviates inwards enough to miss the bat and strike the pad, the batsman could potentially be out LBW. If the ball deviates outwards enough to hit the edge of the bat it could fly behind the batsman to the wicket-keeper or slips fielders for a catch.

Drive. This is played with the same footwork as a front foot defensive, but the bat is swung at the ball in a vertical arc, rather then being placed stationary in the path of the ball. The

aim is to hit the ball into the field, avoiding any infielders, and score runs. The bat should be angled downwards so the ball is hit down into the ground and then bounces and rolls along the field, rather than being hit into the air where a fielder might catch it. The drive defends the wicket in the same way as a front foot defensive, but is designed to score runs. A drive is more risky than a front foot defensive, because swinging the bat gives a chance of mistiming the hit. If the shot is mistimed, the batsman could miss the ball completely, hit the ball into the air where a fielder may catch it, or inside edge the ball on to the wicket. As well as these, deviation of the ball from its line could result in an LBW or an inside or outside edge flying to the wicket-keeper or slips fielders for a catch. There are a few types of drive, named for the directions in which the ball is hit:
o o o o

On Drive is hit in the direction of mid on. Off Drive is hit in the direction of mid off. Cover Drive is hit in the direction of cover. Square Drive is hit square of the wicket, in the direction of point.

Generally the batsman will try to hit through the line of the ball. If the ball is travelling in to his body or down the leg side, he will most likely on drive. If the ball is travelling straight and he is well positioned, he will off drive. If the ball's line is significantly outside off stump or is moving away from the batsman, he will cover or square drive. Off and cover drives are the most common.

Lofted Drive. This is a drive in which the bat is not angled dowanwards but upwards, to deliberately hit the ball in the air. The batsman attempts to hit the ball so it will fall safely between fielders and not be caught. This shot can be used to hit over a ring of infielders and into an empty outfield. It can also be used with a lot of power to hit the ball over the boundary and score 6 runs. Sweep. This is a shot played to a slow ball pitching around the line of leg stump. The front foot is moved down the pitch so far that the batsman ends up kneeling on the knee of his back foot. The front shin is kept vertical, and directly in line with the path of the ball, but the front knee is bent to allow the kneeling pose. The batsman leans forward over his front knee and swings the bat horizontally in an arc from off to leg side. The aim is to hit the ball just as it bounces off the pitch and send it along the ground square or behind square on the leg side. The sweep is used to spin bowlers when they pitch the ball on the leg side. The horizontal arc of the bat can account for any sideways deviation of the ball, but the sweep can be risky if the height of the ball's bounce varies. If the ball bounces more than expected, it can catch the top edge of the bat and fly in the air. If the shot is mistimed or the ball bounces unexpectedly high or low, the ball can miss the bat and hit the pad, potentially for an LBW. The sweep is not used to fast bowlers, as it would be hard to hit the ball and physically dangerous for the batsman, whose body is directly in line with its trajectory.

Reverse Sweep. The reverse sweep is an unusual shot, seen rarely. It is essentially like a sweep, but the batsman turns his bat over in his hands and swings it in an arc from the leg to the off side. This hits the ball square or behind square on the off side. The reverse sweep can be played to balls pitching more to the off side than a regular sweep, but the time necessary to adjust the grip on the bat and backswing the bat on the leg side before the actual swing means that it can only be played to very slow bowling or by premeditating the shot and going into the motions before the ball is released.

Back Foot Shots

Moving on to the back foot is generally done when the length of the ball is such that it pitches far from the batsman's crease - more than about 4 metres from the crease - or very close to the crease within about 1 metre. In the former case, moving back allows the batsman to play the ball after it has risen to waist height or above and gives him time to watch the ball for any deviation after it bounces. In the latter case, moving back positions the batsman so he can hit the ball on the half volley. Note that there is a gap between the pitching distances suitable for front foot and back foot shots, from about 3 to 4 metres from the batsman's crease. This length makes it difficult for the batsman to commit effectively to either foot, since stepping forward would not produce a close half volley, while stepping back does not allow the ball to rise far enough to be played comfortably either. This is the sort of length that a bowler will often aim at producing, and is called a good length (from the bowler's perspective).

Back foot defensive. This is played by shifting the weight on to the back foot and holding the bat vertically in the path of the ball. Like the front foot defensive, the bat is angled downwards so the ball drops quickly to the pitch, but unlike it the toe of the bat is held well off the pitch, since the ball is bouncing higher by the time it hits the bat. This technique can handle the ball bouncing up as high as the waist or midriff. The back foot defensive is designed to defend the ball away from hitting the top of the wicket. If the ball is bouncing higher than the batsman's waist, ideally he would simply let it go since it would be too high to hit the wicket, but he may be committed to playing the shot by the time he recognises it is bouncing too high. In such cases, the batsman can have difficulty positioning his hands and bat high enough, and can be hit on the gloves, possibly deflecting the ball in the air for a fielder to catch. If the ball deviates sideways it can also catch the outside edge for a catch to the wicket-keeper or slips.

Cut. This is an aggressive attacking shot played at a ball pitched on a line outside the off stump. The batsman steps back and either towards or away from the line of the ball, the goal being to place about a metre of space between his body and the ball as it passes him. The bat is swung in a horizontal arc, connecting with the ball just after it has passed the batsman's body, hitting it square or behind square on the off side. As the bat hits the ball, the batsman rolls his wrists to make the blade of the bat angle downwards, so the ball is hit down into the ground, preventing it being caught by a fielder.

The cut is designed to hit the ball hard past the infielders fielding in the point and gully regions, and into the outfield or to the boundary for runs. Risks in playing the cut include: getting a top edge if the ball bounces higher than expected, making the ball fly high in the air for a possible catch; getting a bottom edge and playing the ball on to the wicket; or not rolling the wrists to direct the ball downward so that it flies through the air, presenting a catch to point or gully. If the batsman is skilled enough, he can play a cut shot with the ball well past his body. This makes the trajectory of the hit ball finer, and can be used to place the ball between the gully and any slips fielders. This is called a late cut. A cut can also be played on the front foot if the ball pitches short.

Pull. This is another attacking shot, this time played at a ball pitched on the line of the stumps or the batsman's body. The batsman steps back swings the bat in a horizontal arc, hitting the ball in front of this body as the bat swings to the leg side, "pulling" the ball around to the leg side. A pull can send the ball in almost any direction on the leg side, though most often to the midwicket or square leg regions. As with the cut, the batsman rolls his wrist as he hits the ball, to angle the bat blade downwards and make the ball fly down into the ground to avoid being caught. The pull is designed to penetrate the infield on the leg side and score runs. It can be an effective counter to medium-to-short pitched bowling directed at the stumps or body, as it deals with balls bouncing to waist or torso height. Risks are the same as for a cut: getting a top edge if the ball bounces higher than expected, making the ball fly high in the air for a possible catch; getting a bottom edge and playing the ball on to the wicket; or not rolling the wrists to direct the ball downward so that it flies through the air, presenting a catch to midwicket or square leg. Additionally, if the bat misses the ball the batsman can be struck on the body.

Hook. This is a very aggressive shot, played at balls pitched short on the line of the body, that bounce to around head height. The batsman steps back and brings his head just to the off side of the line of the ball. He swings the bat through a diagonal arc, up in front of his body, hitting the ball as it passes his head. This hits the ball high into the air over square leg or behind square on the leg side. A well-executed hook will hit the ball over the boundary for six runs. If the batsman does not have enough power, he may be able to direct the ball to land away from outfielders. The hook is designed to deal with aggressive bowling aimed at the batsman's head, and counter-attack by scoring runs. It is also a risky shot, because any mistiming of the shot can cause the ball to fly into the air for a catch. It can also be physically dangerous, because if the ball is missed or catches the edge of the bat it can hit the batsman's head. The hook is usually only played by skilful batsmen, and then rarely.

Leg Glance. This is a subtle scoring shot dealing with balls pitched on the line of the batsman's legs or slightly to the leg side. The batsman leans his weight on to the back foot, perhaps shuffling sideways to improve the relative line of the ball. He holds the bat

vertically and connects with the ball in front of his pads, with the bat angled back to the leg side. Any swing of the bat is minimal. The ball is deflected fine down the leg side behind the batsman. The leg glance is designed to score runs from balls pitched at the legs or down the leg side of the batsman. It is more commonly played to balls pitched further up than other back foot shots, so the ball is lower when hit - around knee height or even lower, rather than waist height. It is a relatively safe shot, the main risks being edging the ball fine enough for the wicket-keeper to catch it, flicking it to the (rarely occupied) leg slip or leg gully positions, or missing the ball and having it hit the pads. The pads being hit is usually not a problem because the ball is going down the leg side anyway and cannot result in a successful LBW. It is also possible to play the cut, pull, hook, and leg glance from the front foot if the batsman judges the length of the ball properly and can step forward to produce the appropriate height as the ball reaches his body. They are more commonly played from the back foot, though.

Yorkers and Full Tosses

There are two length categories we have not yet dealt with.

A yorker is a ball pitched on or near the batsman's crease. This is one of the most dangerous balls in the game if pitched on the line of the stumps. The batsman has two options: o Step on to the front foot and attempt to hit the ball just before it hits the pitch. This requires good timing and can be dangerous if the ball dips under the toe of the bat as it is swung. o Step on the back foot and bring the bat down quickly for a back foot defensive shot. The bat needs to travel rapidly from the normal backswing because it has to travel further than a normal back foot defensive, to block the ball right on the pitch. If the ball hits the pitch and bat together, it can squeeze through the gap under the bat unless the bat is held forcefully on the pitch. In either case, if the ball gets under the bat and is on the line of the wicket, the batsman will probably be bowled. A good yorker cannot effectively be hit for runs. The best the batsman can hope to do is defend and keep it away from his wicket. A yorker aimed at the batsman's feet (a sandshoe crusher) is particularly difficult to play, as the batsman will also be trying to get his feet out of the way as he blocks the ball. This can cause all sorts of problems, from being out bowled or LBW to falling over or breaking toes. The fact that batsmen can hit full tosses so easily is the source of an old joke about how easy it must be to hit home runs in baseball "Because the pitchers only ever throw full tosses!" Of course, baseball hitters have to contend with faster pitches, a narrower bat, and over 100 years of pitchers inventing ways to deceive batters without bouncing the ball.

A full toss is a ball which does not bounce on the pitch before reaching the batsman. Full tosses are generally easy to hit, and batsman relish the thought of being bowled one. The standard response is to step on to the front foot, swing

the bat through the line of the ball, and crash it through the field in precisely the direction the batsman desires. Full tosses are frequently hit to or over the boundary for 4 or 6. Bowlers try not to bowl full tosses, but occasionally they misjudge the length of an attempted yorker, or their fingers slip as they release the ball.

Not Hitting the Ball

If the ball is not pitched on the line of the stumps, or is pitched short enough to bounce over them, often the safest tactic is not to hit it at all or, in some cases, to actively evade it.

If the ball is close to the wicket, it is up to the batsman's judgement whether or not he thinks it will hit the wicket. Understandably, batsmen tend to err on the side of caution, and play at balls that will pass close to the wicket. If the ball is very wide to off or leg, or over head height, the batsman's job is easy. He can simply stand still as the ball passes. If the ball is far enough away, the umpire may even call it a wide. If the ball is outside off stump, the batsman can keep his bat at the top of his backswing and watch the ball go past to the wicket-keeper. If the ball is pitched short and aimed at the batsman's body at shoulder height or above, the batsman can bend or crouch to duck under it. If the ball is pitched short and aimed at the batsman from waist to shoulder height, more movement is needed to avoid being hit. The batsman may step backwards (to the leg side) to get inside the line and allow it to pass to his off side. (The other option here is a back foot defensive, using the bat to shield the body.) Balls aimed at this region can be difficult to either avoid or defend with the bat.

Not hitting the ball is a defensive tactic however, and if the batsman prefers to attack he can still attempt to hit the ball. This is where the full range of attacking shots comes into play: the cut, drive, leg glance, pull, and hook. These can be used to hit the ball through the infield and score runs. The danger in playing an attacking shot rather than letting the ball go is the risks associated with that shot - most often the chance of being caught by a fielder.