PROJECT DOCUMENTATION

REFRACTORY LINING
Project No.: Doc. No.: 09
Project Code: Rev.: 0

Revision: 0
Date of issue: 20.04.2001

KONTIBLOCK 170 / 1430

Classification Stacked Fiber - Modules

Main raw material component Ceramic Fiber - Blanket
Type of bond Mechanical
Main application Insulation

Classification temp. 1.400 °C ENV 1094-3

Chemical composition

Al2O3 SiO2 ZrO2

35,0 % 50,0 % 14,0 %

Note: Determination on ignited substance (1050°C) acc. to DIN 51001

Physical characteristics
used for purpose intended by RHI DINARIS GmbH and must not be copied or made

Bulk density 170 kg/m3 ENV 1094-7

For this document we reserve all rights, especially the copyrights. It must only

available to third parties without our written consent. Offenders are liable to

Thermal conductivity (400°C) 0,12 W/mK DR. KLASSE

Thermal conductivity (600°C) 0,17 W/mK DR. KLASSE
Thermal conductivity (800°C) 0,24 W/mK DR. KLASSE
Thermal conductivity (1000°C) 0,31W/mK DR. KLASSE
Thermal conductivity (1200°C) 0,40W/mK DR. KLASSE

The indicated values are standard values, i.e. values taken over a longer representative period of time according to
either valid test standards or internal test methods of the company. They may not be regarded as committed
specifications and therefore not as guaranteed properties. We reserve the right to further technical developments and
new editions of technical product information.
payment of damages

Page: 3/19
 PROJECT DOCUMENTATION
REFRACTORY LINING
Doc. No.: 09
Project Code: Rev.: 0

Revision: 1
Date of issue: 13.12.1999

KONTIBLOCK 170 / 1260

Classification Stacked Fiber - Modules

Main raw material component Ceramic Fiber - Blanket
Type of bond Mechanical
Main application Insulation

Classification temp. 1.250 °C ENV 1094-3

Chemical composition

Al2O3 SiO2
47,0 % 52,0 %

Note: Determination on ignited substance (1050°C) acc. to DIN 51001

Physical characteristics

Bulk density 170 kg/m3 ENV 1094-7

Thermal conductivity (400°C) 0,12 W/mK DR. KLASSE

Thermal conductivity (600°C) 0,15 W/mK DR. KLASSE
Thermal conductivity (800°C) 0,21 W/mK DR. KLASSE
Thermal conductivity (1000°C) 0,30W/mK DR. KLASSE

The indicated values are standard values, i.e. values taken over a longer
representative period of time according to either valid test standards or internal test methods of the company. They may
used for purpose intended by RHI DINARIS GmbH and must not be copied or made

not be regarded as committed specifications and therefore not as guaranteed properties. We reserve the right to further
For this document we reserve all rights, especially the copyrights. It must only

technical developments and new editions of technical product information.

available to third parties without our written consent. Offenders are liable to
payment of damages

Page: 4/19
 PROJECT DOCUMENTATION
REFRACTORY LINING
Doc. No.: 09
Rev.: 0

Revision: 1
Date of issue: 13.12.1999

SUPETHERM 2000

Classification block insulation

Main Raw Material Component calcium silicate
Type of Bond hydrothermal
Main Application insulation

Classification temp. 1.050 °C ENV 1094-3

Chemical composition

Al2O3 SiO2 CaO Fe2O3 MgO Na2O+K2O

0,7 % 52,0 % 46,0 % 0,2 % 0,8 % 0,2 %

Note: Determination on ignited substance (1050°C) acc. to DIN 51001

Physical characteristics

Bulk density 260 kg/m3 ENV 1094-7

Pressure 1,5 N/mm² -
for compression of 5 % -

Permanent lin. change 1,40 % ENV 1094-7

at temperature 700 °C -

Thermal conductivity (400°C) 0,10 W/mK DR. KLASSE

Thermal conductivity (600°C) 0,12 W/mK DR. KLASSE
used for purpose intended by RHI DINARIS GmbH and must not be copied or made

Thermal conductivity (800°C) 0,16 W/mK DR. KLASSE

For this document we reserve all rights, especially the copyrights. It must only

available to third parties without our written consent. Offenders are liable to

The indicated values are standard values, i.e. values taken over a longer
representative period of time according to either valid test standards or internal test methods of the company. They may
not be regarded as committed specifications and therefore not as guaranteed properties. We reserve the right to further
technical developments and new editions of technical product information.
payment of damages

Page: 5/19
 PROJECT DOCUMENTATION
REFRACTORY LINING
Doc. No.: 09
Rev.: 0

Revision: 4
Date of issue: 30.04.2002

SUPETHERM 1500

Classification block insulation

Main Raw Material Component calcium silicat
Type of Bond hydrothermal
Main Application insulation

Classification temp. 1.000 °C ENV 1094-3

Chemical composition

Al2O3 SiO2 CaO L.O.I.

0,2 % 44,0 % 43,0 % 11,50 %

Note: Determination on ignited substance (1050°C) acc. to DIN 51001

Physical characteristics

Bulk density 240 kg/m3 ENV 1094-7

Cold crushing strength 1,4 N/mm² EN 1094-5

Permanent lin. change 0,20 % ENV 1094-7

at temperature 1.000 °C -

Thermal conductivity (200°C) 0,07 W/mK DR. KLASSE

Thermal conductivity (400°C) 0,10 W/mK DR. KLASSE
Thermal conductivity (600°C) 0,14 W/mK DR. KLASSE
Thermal conductivity (800°C) 0,17 W/mK DR. KLASSE
used for purpose intended by RHI DINARIS GmbH and must not be copied or made
For this document we reserve all rights, especially the copyrights. It must only

available to third parties without our written consent. Offenders are liable to

The indicated values are standard values, i.e. values taken over a longer representative period of time according to
either valid test standards or internal test methods of the company. They may not be regarded as committed
specifications and therefore not as guaranteed properties. We reserve the right to further technical developments and
new editions of technical product information.
payment of damages

Page: 6/19
 PROJECT DOCUMENTATION
REFRACTORY LINING
Doc. No.: 09
Rev.: 0

Revision: 3
Date of issue: 18.05.2001

PYROSTOP BLANKET 96 / 1430

Classification fiber blankets

Main raw material component ceramic fibers
Main application heat insultion

ISO-classification temperature1.400°C

Chemical composition

Al2O3 SiO2 ZrO2

35,0 % 50,0 % 14,0 %

Note: Determination on ignited substance (1050°C) acc. to DIN 51001

Physical characteristics

Bulk density 96 kg/m3 ENV 1094-7

Thermal conductivity (400°C) 0,11 W/mK DR. KLASSE

Thermal conductivity (600°C) 0,16 W/mK DR. KLASSE
Thermal conductivity (800°C) 0,23 W/mK DR. KLASSE
Thermal conductivity (1000°C) 0,32W/mK DR. KLASSE

The indicated values are standard values, i.e. values taken over a longer representative period of time according to
either valid test standards or internal test methods of the company. They may not be regarded as committed
specifications and therefore not as guaranteed properties. We reserve the right to further technical developments and
new editions of technical product information.
used for purpose intended by RHI DINARIS GmbH and must not be copied or made
For this document we reserve all rights, especially the copyrights. It must only

available to third parties without our written consent. Offenders are liable to
payment of damages

Page: 7/19
 PROJECT DOCUMENTATION
REFRACTORY LINING
Project No.: Doc. No.: 09
Project Code: Rev.: 0

Revision: 2
Date of issue: 01.02.2000

PYROSTOP BLANKET 96/1260

Classification fibre mat

Main Raw Material Component ceramics fibers
Main Application thermal insulation

Classification temp. 1.250 °C ENV 1094-3

Chemical composition

Al2O3 SiO2
47,0 % 52,0 %

Note: Determination on ignited substance (1050°C) acc. to DIN 51001

Physical characteristics

Bulk density 100 kg/m3 ENV 1094-7

Permanent lin. change -3,00 % ENV 1094-7

at temperature 1.160 °C -

Thermal conductivity (400°C) 0,12 W/mK DR. KLASSE

Thermal conductivity (600°C) 0,18 W/mK DR. KLASSE
Thermal conductivity (800°C) 0,22 W/mK DR. KLASSE

The indicated values are standard values, i.e. values taken over a longer representative period of time according to
either valid test standards or internal test methods of the company. They may not be regarded as committed
specifications and therefore not as guaranteed properties. We reserve the right to further technical developments and
used for purpose intended by RHI DINARIS GmbH and must not be copied or made

new editions of technical product information.

For this document we reserve all rights, especially the copyrights. It must only

available to third parties without our written consent. Offenders are liable to
payment of damages

Page: 8/19
 PROJECT DOCUMENTATION
REFRACTORY LINING
Project No.: Doc. No.: 09
Project Code: Rev.: 0

Revision: 1
Date of issue: 24.08.2000

PYROSTOP FORM 1260

Classification vacuum-shaped products

Main Raw Material Component ceramic fibers

Classification temp. 1.250 °C ENV 1094-3

Chemical composition

Al2O3 SiO2
44,0 % 54,0 %

Note: Determination on ignited substance (1050°C) acc. to DIN 51001

Physical characteristics

Bulk density 260 kg/m3 ENV 1094-7

Permanent lin. change -2,50 % EN 1094-6

at temperature 1.150 °C -
used for purpose intended by RHI DINARIS GmbH and must not be copied or made
For this document we reserve all rights, especially the copyrights. It must only

Thermal conductivity (400°C) 0,09 W/mK DR. KLASSE

available to third parties without our written consent. Offenders are liable to

Thermal conductivity (600°C) 0,12 W/mK DR. KLASSE

Thermal conductivity (800°C) 0,15 W/mK DR. KLASSE
Thermal conductivity (1000°C) 0,18W/mK DR. KLASSE

The indicated values are standard values, i.e. values taken over a longer representative period of time according to
either valid test standards or internal test methods of the company. They may not be regarded as committed
specifications and therefore not as guaranteed properties. We reserve the right to further technical developments and
new editions of technical product information.
payment of damages

Page: 9/19
 PROJECT DOCUMENTATION
REFRACTORY LINING
Project No.: Doc. No.: 09
Project Code: Rev.: 0

Revision: 1
Date of issue: 24.08.2000

PYROSTOP FORM 1400

Classification vacuum-shaped products

Main Raw Material Component ceramic fibers
Type of Bond organic, inorganic
Main Application starting tube

Classification temp. 1.400 °C ENV 1094-3

Chemical composition

Al2O3 SiO2 ZrO2

51,0 % 37,0 % 21,0 %

Note: Determination on ignited substance (1050°C) acc. to DIN 51001

Physical characteristics

Bulk density 230 kg/m3 ENV 1094-7

Thermal conductivity (400°C) 0,09 W/mK DR. KLASSE

Thermal conductivity (600°C) 0,11 W/mK DR. KLASSE
Thermal conductivity (800°C) 0,16 W/mK DR. KLASSE
Thermal conductivity (1000°C) 0,19W/mK DR. KLASSE
used for purpose intended by RHI DINARIS GmbH and must not be copied or made
For this document we reserve all rights, especially the copyrights. It must only

available to third parties without our written consent. Offenders are liable to

The indicated values are standard values, i.e. values taken over a longer
representative period of time according to either valid test standards or internal test methods of the company. They may
not be regarded as committed specifications and therefore not as guaranteed properties. We reserve the right to further
technical developments and new editions of technical product information.
payment of damages

Page: 10/19
 PROJECT DOCUMENTATION
REFRACTORY LINING
Project No.: Doc. No.: 09
Project Code: Rev.: 0

Revision: 2
Date of issue: 15.09.2000

PYROSTOP LD MATTE 35/1600

Classification fiber mats without binder

Main Raw Material Component poly crystallic fibres
Main Application stuffing, filling or filter material
for high temperatures

Classification temp. 1.600 °C ENV 1094-3

Chemical composition

Al2O3 SiO2
95,0 % 5,0 %

Note: Determination on ignited substance (1050°C) acc. to DIN 51001

Physical characteristics

Bulk density 35 kg/m3 ENV 1094-7

Thermal conductivity (400°C) 0,13 W/mK DR. KLASSE

Thermal conductivity (600°C) 0,15 W/mK DR. KLASSE
Thermal conductivity (800°C) 0,17 W/mK DR. KLASSE
Thermal conductivity (1000°C) 0,22W/mK DR. KLASSE
used for purpose intended by RHI DINARIS GmbH and must not be copied or made

Thermal conductivity (1200°C) 0,28W/mK DR. KLASSE

For this document we reserve all rights, especially the copyrights. It must only

available to third parties without our written consent. Offenders are liable to

The indicated values are standard values, i.e. values taken over a longer representative period of time according to
either valid test standards or internal test methods of the company. They may not be regarded as committed
specifications and therefore not as guaranteed properties. We reserve the right to further technical developments and
new editions of technical product information.
payment of damages

Page: 11/19
 PROJECT DOCUMENTATION
REFRACTORY LINING
Project No.: Doc. No.: 09
Project Code: Rev.: 0

Revision: 2
Date of issue: 15.09.2000

SUPETHERM EXTRA

Classification block insulation

Main Raw Material Component special glassfibres, mineralfibres
Type of bonding organic/anorganic
Main application isolation

Classification temp. 1.100 °C ENV 1094-3

Chemical composition

Al2O3 SiO2 Fe2O3 Na2O CaO+MgO

13,0 % 57,0 % 0,5 % 1,4 % 28,0 %

Note: Determination on ignited substance (1050°C) acc. to DIN 51001

Physical characteristics

Bulk density 320 kg/m3 ENV 1094-7

Pressure 0,2 N/mm² -
for compression of 10 % -

Permanent lin. change -1,00 % EN 1094-6

at temperature 1.000 °C -

Thermal conductivity (400°C)0,08 W/mK DR. KLASSE

Thermal conductivity (600°C)0,12 W/mK DR. KLASSE
Thermal conductivity (800°C)0,16 W/mK DR. KLASSE
used for purpose intended by RHI DINARIS GmbH and must not be copied or made

The indicated values are standard values, i.e. values taken over a longer representative period of time according to
For this document we reserve all rights, especially the copyrights. It must only

either valid test standards or internal test methods of the company. They may not be regarded as committed
available to third parties without our written consent. Offenders are liable to

specifications and therefore not as guaranteed properties. We reserve the right to further technical developments and
new editions of technical product information.
payment of damages

Page: 12/19
 PROJECT DOCUMENTATION
REFRACTORY LINING
Project No.: Doc. No.: 09
Project Code: Rev.: 0

Revision: 3
Date of issue: 30.04.2002

PYROSTOP PAPIER 1260

Classification paper
Main Raw Material Component ceramic fibers

Classification temp. 1.250 °C ENV 1094-3

Chemical composition

Al2O3 SiO2
47,0 % 53,0 %

Note: Determination on ignited substance (1050°C) acc. to DIN 51001

Physical characteristics

Bulk density 210 kg/m3 ENV 1094-7

Thermal conductivity (200°C) 0,06 W/mK DR. KLASSE

Thermal conductivity (400°C) 0,09 W/mK DR. KLASSE
Thermal conductivity (500°C) 0,11 W/mK DR. KLASSE
Thermal conductivity (600°C) 0,13 W/mK DR. KLASSE
Thermal conductivity (800°C) 0,20 W/mK DR. KLASSE

The indicated values are standard values, i.e. values taken over a longer representative period of time according to
either valid test standards or internal test methods of the company. They may not be regarded as committed
used for purpose intended by RHI DINARIS GmbH and must not be copied or made

specifications and therefore not as guaranteed properties. We reserve the right to further technical developments and
For this document we reserve all rights, especially the copyrights. It must only

new editions of technical product information.

available to third parties without our written consent. Offenders are liable to
payment of damages

Page: 13/19
 PROJECT DOCUMENTATION
REFRACTORY LINING
Project No.: Doc. No.: 09
Project Code: Rev.: 0

Revision: 1
Date of issue: 10.11.1998

DIDURITAL 140 W COR 0–6

Classification premanufactured parts

made of unshaped products
Main Raw Material Component dense, low in iron fireclay
Type of Bond hydraulic

Chemical composition

Al2O3 SiO2 CaO Fe2O3 K2O

51,0 % 39,0 % 4,0 % 0,6 % 2,5 %

Note: Determination on ignited substance (1050°C) acc. to DIN 51001

Physical characteristics

Original condition:

Bulk density 2,28 g/cm³ EN 993-1

Cold crushing strength 100,0 N/mm² EN 993-5
Apparent porosity 13,0 vol% EN 993-1

Temp. limit for application 1.400 °C -

used for purpose intended by RHI DINARIS GmbH and must not be copied or made
For this document we reserve all rights, especially the copyrights. It must only

available to third parties without our written consent. Offenders are liable to

The indicated values are standard values, i.e. values taken over a longer representative period of time according to
either valid test standards or internal test methods of the company. They may not be regarded as committed
specifications and therefore not as guaranteed properties. We reserve the right to further technical developments and
new editions of technical product information.
payment of damages

Page: 14/19
 PROJECT DOCUMENTATION
REFRACTORY LINING
Project No.: Doc. No.: 09
Project Code: Rev.: 0

Revision: 5
Date of issue: 29.03.2001

DIDOTECT 150 V 0-0,5

Classification refractory wet mortar

VDEh-Code 842013452098
Grain Size 0-0,5 mm
Main Raw Material Component bauxite, fireclay
Type of Bond air hardening-chemical
Storage Limit 12 months
Packing plastic drum
Working Method trowelling, mortaring

Amount of material 1,95 t/m³

Chemical composition

Al2O3 SiO2 Fe2O3 TiO2 C Na2O

50,5 % 42,0 % 0,9 % 1,8 % 1,1 % 2,6 %

Note: Determination on ignited substance (1050°C) acc. to DIN 51001

Temp. limit for application1.500 °C

The indicated values are standard values, i.e. values taken over a longer representative period of time according to
either valid test standards or internal test methods of the company. They may not be regarded as committed
specifications and therefore not as guaranteed properties. We reserve the right to further technical developments and
new editions of technical product information.
used for purpose intended by RHI DINARIS GmbH and must not be copied or made
For this document we reserve all rights, especially the copyrights. It must only

available to third parties without our written consent. Offenders are liable to
payment of damages

Page: 15/19
 PROJECT DOCUMENTATION
REFRACTORY LINING
Project No.: Doc. No.: 09
Project Code: Rev.: 0

Revision: 1
Date of issue: 12.04.2000

LEGRAL 35 / 8

Classification insulating refractory bricks

ISO 135 L-0,80
Main Raw Material Component light fireclay
Type of Bond ceramic
Main Application insulation

Classification temp. 1.380 °C EN 1094-2

Chemical composition

Al2O3 SiO2 CaO Fe2O3 MgO TiO2 K2O Na2O

33,0 % 60,0 % 0,4 % 1,6 % 0,5 % 0,8 % 2,8 % 0,3 %

Note: Determination on ignited substance (1050°C) acc. to DIN 51001

Physical characteristics

Bulk density 0,80 g/cm³ EN 1094-4

Cold crushing strength 3,0 N/mm² EN 1094-5
Apparent porosity 68,0 vol% EN 1094-4

Lin. therm. expansion 0,60 % -

at temperature 1.000 °C -
Permanent lin. change -1,60 % EN 1094-6
at temperature 1.350 °C -

Thermal conductivity (400°C) 0,25 W/mK DR. KLASSE

Thermal conductivity (600°C) 0,27 W/mK DR. KLASSE
used for purpose intended by RHI DINARIS GmbH and must not be copied or made

Thermal conductivity (800°C) 0,31 W/mK DR. KLASSE

For this document we reserve all rights, especially the copyrights. It must only

Thermal conductivity (1000°C) 0,33W/mK DR. KLASSE

available to third parties without our written consent. Offenders are liable to

The indicated values are standard values, i.e. values taken over a longer
representative period of time according to either valid test standards or internal test methods of the company. They may
not be regarded as committed specifications and therefore not as guaranteed properties. We reserve the right to further
technical developments and new editions of technical product information.
payment of damages

Page: 16/19
 PROJECT DOCUMENTATION
REFRACTORY LINING
Project No.: Doc. No.: 09
Project Code: Rev.: 0

Revision: 1
Date of issue: 12.04.2000

LEGRIT 110–0,9 0-4

Classification insulating refractory castable

VDEh-Code 201686250910, 201486251010,
201386250910
Grain Size 0 - 4 mm
Main Raw Material Component Vermiculit, light fireclay
Type of Bond hydraulic
Storage limit 12 months
Packing paper bags
Working Method rodding , spraying, casting

Amount of material 0,95 t/m³

Water addition (mean value) 44,00 %

Chemical composition

Al2O3 SiO2 CaO Fe2O3 MgO TiO2 K2O

26,0 % 37,0 % 17,0 % 11,0 % 4,5 % 1,2 % 2,2%

Note: Determination on ignited substance (1050°C) acc. to DIN 51001

Physical characteristics

Cold crushing strength (110°C) 8,0N/mm² EN 993-5

Cold crushing strength(1000°C) 4,0N/mm² EN 993-5

Thermal conductivity (400°C) 0,27 W/mK DR. KLASSE

used for purpose intended by RHI DINARIS GmbH and must not be copied or made

Thermal conductivity (600°C) 0,27 W/mK DR. KLASSE

Thermal conductivity (800°C) 0,28 W/mK DR. KLASSE
For this document we reserve all rights, especially the copyrights. It must only

Thermal conductivity (1000°C) 0,29W/mK DR. KLASSE

available to third parties without our written consent. Offenders are liable to

Thermal expansion (1000°C) 0,50 % DIN 51045-4

PLC (1000°C) -1,50 % EN 993-10
Temp. limit for application 1.100 °C -

The indicated values are standard values, i.e. values taken over a longer representative period of time according to
either valid test standards or internal test methods of the company. They may not be regarded as committed
specifications and therefore not as guaranteed properties. We reserve the right to further technical developments and
new editions of technical product information.
payment of damages

Page: 17/19
 PROJECT DOCUMENTATION
REFRACTORY LINING
Project No.: Doc. No.: 09
Project Code: Rev.: 0

Revision: 2
Date of issue: 30.04.2002

L 2300

Classification insulating refractory bricks

ISO 125 L-0,50/ASTM 23
Main Raw Material Component light fireclay
Type of Bond ceramic

Classification temp. 1.250 °C EN 1094-2

Chemical composition

Al2O3 SiO2 CaO Fe2O3 K2O Na2O

37,0 % 44,0 % 12,0 % 1,3 % 1,5 % 0,3 %

Note: Determination on ignited substance (1050°C) acc. to DIN 51001

Physical characteristics

Bulk density 0,55 g/cm³ EN 1094-4

Cold crushing strength 1,5 N/mm² EN 1094-5

Permanent lin. change -1,50 % EN 1094-6

at temperature 1.250 °C -

Thermal conductivity (200°C) 0,14 W/mK DR. KLASSE

Thermal conductivity (400°C) 0,16 W/mK DR. KLASSE
Thermal conductivity (600°C) 0,18 W/mK DR. KLASSE
Thermal conductivity (800°C) 0,21 W/mK DR. KLASSE
used for purpose intended by RHI DINARIS GmbH and must not be copied or made

Thermal conductivity (1000°C) 0,25W/mK DR. KLASSE

For this document we reserve all rights, especially the copyrights. It must only

available to third parties without our written consent. Offenders are liable to

The indicated values are standard values, i.e. values taken over a longer representative period of time according to
either valid test standards or internal test methods of the company. They may not be regarded as committed
specifications and therefore not as guaranteed properties. We reserve the right to further technical developments and
new editions of technical product information.
payment of damages

Page: 18/19
 PROJECT DOCUMENTATION
REFRACTORY LINING
Project No.: Doc. No.: 09
Project Code: Rev.: 0

Revision: 2
Date of issue: 25.10.2000

MAXIAL 330

Classification fireclay bricks FC 35

Main Raw Material Component fireclay
Type of Bond ceramic
Main Application checkerwork of hot blast stoves

Chemical composition

Al2O3 SiO2 CaO Fe2O3 MgO TiO2 K2O

35,0 % 60,0 % 0,2 % 1,2 % 0,1 % 1,7 % 0,7%

Note: Determination on ignited substance (1050°C) acc. to DIN 51001

Physical characteristics
Bulk density 2,25 g/cm³ EN 993-1
Cold crushing strength 55,0 N/mm² EN 993-5
Apparent porosity 15,0 vol% EN 993-1
Refractoriness under load T0,5 1350°C EN 993-8
Creep in compression 0,100 % EN 933-9
at test temperature 1.200 °C -
with load 0,200 N/mm² -
with heating up rate 5 K/min -
test period 5-25 -
Thermal expansion (1100°C) 0,75 % DIN 51045-4
PLC (1400°C) 0,00 % EN 993-10
Thermal conductivity (400°C) 1,20 W/mK DR. KLASSE
Thermal conductivity (700°C) 1,30 W/mK DR. KLASSE
Thermal conductivity (1000°C) 1,40W/mK DR. KLASSE
Specific heat (1000°C) 1,06 kJ/kgK -
used for purpose intended by RHI DINARIS GmbH and must not be copied or made

Res. to thermal shocks (water) 20 Zyklen DIN 51068/1

For this document we reserve all rights, especially the copyrights. It must only

available to third parties without our written consent. Offenders are liable to

The indicated values are standard values, i.e. values taken over a longer representative period of time according to
either valid test standards or internal test methods of the company. They may not be regarded as committed
specifications and therefore not as guaranteed properties. We reserve the right to further technical developments and
new editions of technical product information.
payment of damages

Page: 19/19