Telephone:
Fax:
VAT Registration No.:
Notes Specified value Measured value
Vehicle identification
No. of cylinders Type 4/DOHC
Capacity (Fiscal) cc 1397
Compression ratio :1 11,0
Suitable for unleaded petrol Yes
Minimum octane rating RON 95
Ignition system Make Bosch
Ignition system Type Motronic MEV17.4
Ignition system Description Map-DI
Trigger location Cam / Crankshaft
Fuel system Make Bosch
Fuel system Type Motronic MEV17.4
Fuel system Description MFI-s
Air metering Type MAP
Combined ignition and fuel ECM Yes
Diagnostic socket Yes
Ignition system
Ignition coil supply voltage + with ballast V 12,0
Firing order 1-3-4-2
Tuning and emissions
Ignition timing - basic BTDC °Engine/rpm Not adjustable
Ignition advance checks °Engine/rpm ECM Controlled
Idle speed rpm 700±50 Not adjustable
Oil temperature for CO test °C 80
CO level at idle speed - tailpipe Vol. % CO 0,2 Max Not adjustable
HC level at idle speed ppm 100
CO2 level at idle speed Vol. % CO2 14,5-16
O2 level at idle speed Vol. % O2 0,1-0,5
Increased idle speed for CO test rpm 2300-2700
CO content at increased idle speed Vol. % 0,2
Lambda at increased idle λ 0,97-1,03
Spark plugs
Spark plugs Original equipment Beru
Spark plug Type 12 ZR-6 SP03
Spark plugs Make Beru
Electrode gap mm 0,95
Spark plugs Make NGK
Spark plug Type PLZKBR7A-G
Manufacturer: Peugeot Model: 308 (07-14) 1,4 VTi (c) Autodata Limited 2013
Engine code: EP3 (8FS) Output: 70 (95) 6000 . 11/09/2025
Tuned for: R-Cat Year: 2007-11 V9.200-
Electrode gap mm 0,95
Fuel system
Fuel pump delivery pressure bar 3,5
Engine coolant temperature (ECT) sensor Ohm/°C 630/80
Service checks and adjustments
Valve clearance -INLET mm Hydraulic
Valve clearance -EXHAUST mm Hydraulic
Oil pressure bar/rpm 2,0/1000
Thermostat opens °C 82
Lubricants and capacities
Engine oil options
Ambient temperature range All temperatures
Engine oil grade SAE 5W-30 Synthetic
00000156 Engine oil classification OEM PSA B71 2290
00000155 Engine oil classification API/ACEA /C2
Engine with filter(s) litres 4,2
Other lubricants and capacities
Manual transmission oil grade SAE 75W-80 Synthetic
Manual transmission litres 1,8
Cooling system - total capacity litres 6,0
Brake fluid Type DOT 4
Brake fluid litres 1,0
Power steering fluid Type Total Fluide DA
Power steering fluid litres 1,2
Tightening torques
00000125 Cylinder head instructions
Cylinder head
Renew bolts Yes
Other engine tightening torques
Main bearings Renew bolts/nuts Yes
Main bearings Stage 1 30 Nm
Main bearings Stage 2 150°±5°
Big end bearings Renew bolts/nuts Yes
Big end bearings Stage 1 1)5 Nm 2)10 Nm
Big end bearings Stage 2 130°±5°
Oil pump to cylinder block 1)10 Nm 2)25 Nm
Sump bolts 12 Nm
Sump drain bolt 30 Nm
00000124 Flywheel/driveplate
00000119 Clutch pressure plate 20 Nm
00000096 Crankshaft pulley/damper centre bolt 50 Nm+180°
Crankshaft pulley/damper bolts 28 Nm
00000096 Camshaft sprocket/gear 20 Nm+180°
Camshaft/rocker cover 9 Nm
Inlet manifold to cylinder head 20 Nm
00000119 Exhaust manifold to cylinder head 25 Nm
00000119 Exhaust downpipe to manifold 25 Nm
Water pump 9 Nm
Spark plugs 25 Nm
Lambda sensor (Oxygen) 47 Nm
Manufacturer: Peugeot Model: 308 (07-14) 1,4 VTi (c) Autodata Limited 2013
Engine code: EP3 (8FS) Output: 70 (95) 6000 . 11/09/2025
Tuned for: R-Cat Year: 2007-11 V9.200-
Knock sensor (KS) 20 Nm
Engine oil pressure switch 20 Nm
Chassis tightening torques
00000119 Front hub 325 Nm
00000119 Rear hub 300±30 Nm
Steering wheel 33 Nm
00000119 Steering rack/box mounting 100 Nm
00000119 Steering track rod end 45 Nm
Brake disc to hub Front 10 Nm
00000119 Brake caliper to carrier Front 31 Nm
00000119 Brake caliper/carrier to hub Front 33 Nm+45°
00000119 Brake caliper to carrier Rear 34 Nm
00000119 Brake caliper/carrier to hub Rear 30 Nm+35°
ABS sensor Front 8 Nm
ABS sensor Rear 8 Nm
00000185 Road wheels 100 Nm
Starting and charging
Battery V/RC(Ah) 12
Brake disc and drum dimensions
Minimum disc thickness for replacement - ventilated Front 24 mm
Minimum disc thickness for replacement Rear 7 mm
Disc runout Front 0,05 mm
Disc runout Rear 0,05 mm
Minimum pad thickness Front 2 mm
Minimum pad thickness Rear 3 mm
Air conditioning
No. of AC service connectors 2
Air conditioning restrictor type Expansion valve
Compressor clutch/magnetic coupling No
Compressor variable displacement solenoid Yes
Air conditioning refrigerant Type R134a
Air conditioning refrigerant quantity grams 450±25
Air conditioning oil group PAG
Air conditioning oil Type Dens Oil 8
Air conditioning oil quantity cm³ 80
Air conditioning oil viscosity ISO 46
Autodata Note 96
Use new bolts.
Autodata Note 119
Use new nuts.
Autodata Note 124
Flywheel/driveplate
Manufacturer: Peugeot Model: 308 (07-14) 1,4 VTi (c) Autodata Limited 2013
Engine code: EP3 (8FS) Output: 70 (95) 6000 . 11/09/2025
Tuned for: R-Cat Year: 2007-11 V9.200-
Use new bolts.
1) 8 Nm
2) 30 Nm
3) 90°
Autodata Note 125
Cylinder head bolts
Tighten bolts in the following stages:
1) 1-10 = 30 Nm + 90° + 90°
2) 11-12 = 15 Nm + 90° + 90°
3) 13 = 25 Nm + 30°
Coat bolts with Molykote G Rapid Plus E3 or equivalent.
Autodata Note 155
Engine oil classification
→ RPO No. 11787 (→ 15.02.2009)
Autodata Note 156
Engine oil classification
Exceeds ACEA classification and can be used for all model years.
Autodata Note 185
Road wheels
Steel wheels:
After tightening slacken off 360°.
Retighten to specified torque.
Tightening sequence
Manufacturer: Peugeot Model: 308 (07-14) 1,4 VTi (c) Autodata Limited 2013
Engine code: EP3 (8FS) Output: 70 (95) 6000 . 11/09/2025
Tuned for: R-Cat Year: 2007-11 V9.200-