Dressta Technet System

PARTS CATALOGUES AND

INFORMATION BULLETINS

USER MANUAL
DRESSTA TECHNET SYSTEM - PARTS CATALOGUES AND INFORMATION BULLETINS

Contents
I. INTRODUCTION – DRESSTA NET SYSTEM ............................................................................................... 3

II. CATALOGS - NAVIGATION BAR .............................................................................................................. 4

III. MACHINE VIEWER ................................................................................................................................ 5

IV. VIEWING THE CONTENTS OF THE SELECTED MACHINE DIRECTORY .................................................... 7

V. BASKET................................................................................................................................................. 13

VI. INFORMATION BULLETINS ................................................................................................................. 14

VII. TERMINATION THE OPERATION WITH THE SYSTEM ......................................................................... 17

2
DRESSTA TECHNET SYSTEM - PARTS CATALOGUES AND INFORMATION BULLETINS

I. INTRODUCTION – DRESSTA NET SYSTEM

Launch web browser
When you type the address of the page, https://www.net.dressta.com tap "Enter".
You'll see "Login Form" and after entering your "Login" or "e-mail" and "Password" press "Login".

The DRESSTA NET page starts. By default, the page opens in English. To open the page in a different language,
select the required language on the right side in the lower navigation bar.

Note! Before using the system, please refer to the instructions in the "HELP".

Depending on the need, click on the tab "DOCUMENTATION" containing Operator’s Manuals, Service Manuals
and other technical documents or on the "CATALOGS" tab containing the Catalogs of machines offered by
LIUGONG DRESSTA MACHINERY.

3
DRESSTA TECHNET SYSTEM - PARTS CATALOGUES AND INFORMATION BULLETINS

II. CATALOGS - NAVIGATION BAR – At the top right we have 4 tabs that appear on all pages of the part
catalog:
A. Language – allows you to select the language (translation) in the Parts Catalog.
B. Logged in – information about the currently logged-in user (the ability to manage his personal data and
the ability to change the password of access to TechNet System).
A B

C. Search – allows you to search for a part in all machine directories.

Selecting a part in the search window takes you to the machine, group, and selected part.
D. Basket – opens a window with a list of parts previously added to the Basket (detailed description of the
Basket handling in the following section). C D

4
DRESSTA TECHNET SYSTEM - PARTS CATALOGUES AND INFORMATION BULLETINS

III. MACHINE FINDER – part of the screen below the navigation bar

The click on the tab "CATALOGS" opens the web machine directory in a new browser tab. The screen is divided
into several parts. This allows for a preliminary, fast selection of machines according to several criteria:
1. Recommended machines, featured,

Selection depending on machine size and type:

2. Small dozers,
3. Medium dozers,
4. Large dozers,
5. Pipelayers and Belt Conveyor Shifters,
6. Wheel loaders
7. Crawler loaders,
8. Backhoe loaders,
9. Other.

2 3 4 5

6 7 8 9

5
DRESSTA TECHNET SYSTEM - PARTS CATALOGUES AND INFORMATION BULLETINS

10. Machine selection by Serial Number (S/N).

10

11. Filtering - search for the machine (machine group), after typing the complete or partial description of the
machine model.

11

6
DRESSTA TECHNET SYSTEM - PARTS CATALOGUES AND INFORMATION BULLETINS

IV. VIEWING THE CONTENTS OF THE SELECTED MACHINE DIRECTORY

When you select a Machine model, a list of Catalog Sections appears to the right.

The primary language is English, and when you change the language on the top right bar, you will add a
translation in selected language:

The icon “Basket” is active on all pages of the current parts catalog and opens a window with a list of parts
previously added to the “Basket” (detailed description of the” Basket” in the following Section).

7
DRESSTA TECHNET SYSTEM - PARTS CATALOGUES AND INFORMATION BULLETINS

When you select a machine model, the "Search" icon allows you to search for parts only in the current directory
of the selected machine, after entering the part number (P/N) or name (the whole P/N or several characters).

If you select a row in a table with the part you are looking for, System opens the directory group page with this
part.

When you select a Section, you'll be redirected to the page with Groups listing.

8
DRESSTA TECHNET SYSTEM - PARTS CATALOGUES AND INFORMATION BULLETINS

The filter bar allows you to search for groups by the data you enter:

To remove filter, you have to manually clear the filter bar from the data.

When you select a Group, you open a page with a list of the parts this Group consisted of – the RH Side with
drawing (s) on the LH Side

Note! A Group can include more than one drawing. This indicates the marking with the sheet number with the
active blue square below the drawing, the click of which opens the next sheet. (The transition between drawings
occurs when you click the tag below the drawing.)

9
DRESSTA TECHNET SYSTEM - PARTS CATALOGUES AND INFORMATION BULLETINS

Assemblies that are detailed in another group, item 1, (>06-03X1), have hyperlinks that allow you to move
directly to the group of that team.

The document icon (if any) allows you to open or save the Information Bulletin (pdf or doc) attached to the group,
with information about the changes made to the previous group.

The "Print" icon opens the drawing print window and the list of parts of the currently viewed catalog group.

10
DRESSTA TECHNET SYSTEM - PARTS CATALOGUES AND INFORMATION BULLETINS

The drop-down “Print” menu allows you to save a directory group in the selected format.
The “Envelope” icon (send email) allows you to send the current group by email. In the email we are sending, we
can choose the format of the document that will be sent.

Four icons (magnifying glass) on the right hand side allow you to change the print preview.

In the part line on the right (if any), there are designations U1, U2. that describe the notes for the part, reading
when the selected abbreviation is indicated by the cursor.

11
DRESSTA TECHNET SYSTEM - PARTS CATALOGUES AND INFORMATION BULLETINS

Selecting a part in the inventory on the RH side shows the location of all the items in the drawing (the red circle
around the Item number), and vice versa, by selecting the Item number on the drawing, the line of that part in the
inventory will be highlighted.

The blue "<" and ">" buttons allow you to move between adjacent groups, the previous and the
next catalog Group.

12
DRESSTA TECHNET SYSTEM - PARTS CATALOGUES AND INFORMATION BULLETINS

V. BASKET
The Basket is used to store the items of our selection in the form of a list of parts and assemblies, which we can
later print or send by e-mail.

To add a part to your Basket, press the "Basket" icon at the end of the line of the part to the right. You'll see a
message that you've added this part to your Basket.

The red icon with the "Open the Basket" tab allows you to open the basket, in which you can find all parts
attached earlier.

The Basket content can be printed, saved or sent by e-mail (e.g. for order) – see the icon on the right at the top of
the Basket opened window. The Basket content is printed by generating a pdf format (or other) content file and
then printing it.

In the Basket, you can also edit the quantity of ordered parts : when you click the edit, you can change quantity
and then save icon.
To remove a single part from the Basket, press the red button next to the part name, or to remove all contents of
the Basket, press Remove All (feature in preparation).
Return to browsing the directory by pressing the "Close Basket" button to the RH side , above the table.

13
DRESSTA TECHNET SYSTEM - PARTS CATALOGUES AND INFORMATION BULLETINS

VI. INFORMATION BULLETINS

The Information Bulletins describe the significant changes that have been made to the technical documentation
of the machines. These changes are introduced to machine catalogs by updating the Group(s). The new group is
given a new designation by "raising" the "X" index, e.g. Group 07-01X1.

Changes documented by the correct Information Bulletin are always marked in the old group (before the change)
next to the "Print" icon.

The bulletin on the basis of which the changes were made can be opened by pressing its symbol placed on the in
the upper RH corner of the specification.

Search for Information Bulletins

IMPORTANT: Bulletins include description only – without any attachments.

You can review and search for Information Bulletins you have to leave the "Dressta Catalogs" tab to the
"DresstaNet" tab and click on the "DOCUMENTATION" bookmark.

14
DRESSTA TECHNET SYSTEM - PARTS CATALOGUES AND INFORMATION BULLETINS

Then click on the "Information Bulletins" bookmark on the top LH side of the page. This will open a table of
bulletins that appear in all parts catalogs.

The bulletin data is contained in six columns:

-– Name -- means bulletin marking (see “Marking code for service bulletins” below),
-– Description – abbreviated topics (e.g. catalog Groups) the bulletin refers to ,
-– Date – date the bulletins are available in TechNet,
-– Language – information about the language in which the Bulletin is available,
-– Machine model – gives a machine type, the bulletin refers to,
-– The last column provides Internet links to Bulletins in rtf, doc or pdf format.

Marking code for service bulletins

Marking example:

1) A letter in the first position means, that bulletin refers to parts catalog,
B letter in the first position means, that bulletin refers to operator’s manual,
C letter in the first position means, that bulletin refers to service manual.
15
DRESSTA TECHNET SYSTEM - PARTS CATALOGUES AND INFORMATION BULLETINS

2. A letter in the second position means, that bulletin refers to wheeled machines,
B letter in the second position means, that bulletin refers to crawler dozers.

3. The third position tells the year the bulletin was issued.

4. Bulletin serial No.

Information bulletins” bookmark page servicing

When you enter the above page, you can review all bulletins at once due to the way the page defaulted set up.
Each column has the ability to sort, filter, and hide a column.
Either a single or double click on a selected column description will order the bulletins table by their respective
numbers in ascending order, while a second click(s) will provide descending bulletins ordering.
Entering letters or numbers in the window under the column name and approval with the mouse button or
"Enter" key, will filter the entire table according to filtered column.

NOTE: By default, the filtering method you set shows records that "contains"the typed sequence of characters.
Another way of filtering results is possible when you enter the drop-down menu..

By clicking on the dots to the RH side of the column name, we can open the drop-down menu, giving access to
the function as below:

a. Sort ascending, descending,,

b. Columns - hide or display a column,

c. Filter – multiple choice of filtering

parameters,

16
DRESSTA TECHNET SYSTEM - PARTS CATALOGUES AND INFORMATION BULLETINS

You can read the Bulletin content by clicking on the right side of the relevant Bulletin icon of your choice.

Depending on your browser settings, you have the option to view and/or store the viewed bulletin contents on
your computer hard disc.

Bulletins for which the "Machine Model" column is empty are not closely related to a particular type of machine
and their subject matter concerns general issues or documentation, not uniquely related to
the type of machine.

VII. TERMINATION THE OPERATION WITH THE SYSTEM

Completion of work at any time, in any case, must be preceded by logging out.

We finish working with the "Documentation" tab by clicking on "Log out".

Work with the "Catalogs" tab we finish work by clicking “X” to close the whole web page.

17