Can a belt conveyor be started
with heavy load? Certainly.
DODGE CST (Controlled Start Transmission) H250K
CST H250K is a new product launched by the China DODGE mechanical transmission product
R&D team under ABB in 2014, which is an extension product with the lowest power range in the
CST family. Products of the existing CST family are mainly used for long-distance multi-points
driving belt conveyors, while H250K is used for short-distance single-point/double-points driving
belts. It inherits many advantages of CST, e.g.: reduce the motor’s demand for peak torque;
reduce slippage which may occur between roller and rubber belt; reduce the tensile stress and
vibration of rubber belt as well as impact load on all non-driven rollers and structures; reduce the
peak stress of belt by 15%, which largely saves the cost of belt conveyor; and shorten stroke of
tension to improve load distribution; in addition, H250K not only increases the waterproof
protection level of control panel but also adopts the simple and reliable ABB operating system to
make it more simple and reliable to operate.
Baldor Electric (Shanghai) Co., Ltd.
Address: No.160 Songsheng Road, Songjiang Industry Park, Shanghai, 201611
Tel.: (86 21) 57605335
Fax: (86 21) 57605336 57605338
E-mail: [Link]@[Link]
DODGE CST (Controlled Start Transmission) H250K
Product Features:
Different from existing CST products, H250K is mainly used for single-point and double-points driving
short-distance belt conveyors;
Simple and reliable ABB operating system ensures easy operation and high reliability;
Higher waterproof protection level of control panel;
High reliability, ensuring smooth running under different working conditions and reducing downtime;
Overload protection, setting the pressure of low-speed shaft clutch, which increases the service life of CST
and main motor;
High cost performance and excellent performance;
Improve belt tension and reduce belt pressure intensity;
S-type speed starting curve, reducing the instantaneous impact on motor and belt conveyor;
Mechanical transmission, easy to maintain, lowering running cost.
Product Parameters:
Technical parameters of H250K product Motor at input shaft RPM=1480
Gear ratio Output shaft RPM Max. power of input shaft kW (Safety factor=1.0)
15.7500 93.9683 389
16.3802 90.3529 374
17.0464 86.8217 360
17.7518 83.3716 345
18.5000 80.0000 331
19.2949 76.7041 318
20.1411 73.4815 304
21.0438 70.3297 291
22.0086 67.2464 278
23.0424 64.2294 266
24.1528 61.2766 254
25.3486 58.3860 242
26.6400 55.5556 230
28.0391 52.7835 219
29.5598 50.0680 207
31.5341 46.9333 194
33.3661 44.3564 184
35.3813 41.8301 173
