LINK69 Software

Management User Manual

 CONTENT
1 Software Installation .........................................................................................................................1
2 Device Manager..................................................................................................................................4
3 Label Editor..........................................................................................................................................7
4 PLU Information ..................................................................................................................................8
4.1 PLU Edit .......................................................................................................................................8
4.2 Package Type ...........................................................................................................................18
4.2.1. Default ............................................................................................................................18
4.2.2. Fixed Weight Mode.......................................................................................................18
4.2.3. Fixed Price Mode ..........................................................................................................19
4.2.4. Fixed Weight and Price Mode (Gift Baskets) ............................................................20
4.2.5. Fixed Weight Mode (Weight Range) .........................................................................21
4.2.6. Fixed Price Mode (Weight Range) .............................................................................22
4.3 Department ..............................................................................................................................23
4.4 Unit ............................................................................................................................................23
4.5 Category ...................................................................................................................................24
4.6 Discount ....................................................................................................................................25
4.7 Tare ............................................................................................................................................26
4.8 Custom Barcode ......................................................................................................................27
4.9 AI Picture Association (for AI scale) .....................................................................................28
4.10 Label Scale Hotkey ..............................................................................................................29
4.10.1 Label Scale Hotkey Edit ...............................................................................................29
4.10.2 Hotkey Sheet Installation ............................................................................................37
5 Notice Info ..........................................................................................................................................38
6 Message..............................................................................................................................................39
7 Cashier ................................................................................................................................................40
8 User Manager ....................................................................................................................................41
9 Download Schedule ........................................................................................................................42
10 Association File Download .....................................................................................................48
11 Cloud Scale Web Param Settings (for ZM3 model) ...........................................................49
12 Journal ..........................................................................................................................................50
13 Change Password .....................................................................................................................52
14 Update Label Scale Firmware ................................................................................................53
15 Update Label Scale Font .........................................................................................................54
16 Language & Software Version ...............................................................................................55
17 Windows ......................................................................................................................................56
18 Touch Scale Hotkey ...................................................................................................................57
19 Touch Scale Image Management .........................................................................................63
20 Appendix: Barcode Coding List .............................................................................................65
1 Software Installation
Double-click to open the program installation package , select language
needed, then click “确定”:

Click “Next” according to the prompts as shown below:

Click “Browse” to select the folder, then click “Next”:

1
After select the start menu folder, click “Next” according to the prompt:

Click “Install” to start the installation process:

2
Please wait while installing:

According to the prompt, if “Launch LINK69” is selected, the program will run automatically
after click “Finish”. The installation is complete.

3
2 Device Manager

1. Connect scale to PC:

Connect scale and PC through Ethernet cable:
Communication test

Double click to open the program “LINK69”

2 Click “Device Group”, the system will 1 Click “Device Manager”

automatically search device for connecting

3 This progress bar shows the status

of searching device

4 If the device not all in place, 5 If the devices still not all in place,
please click here to search again please click here to add device manually

6 Type the device segment

([Link].255) or a
known device IP
([Link].87) here and
then click “Search”

7 Device connected successfully

4
 8 Click “+Add Scale”

9 Add scale IP address or

segment of device where the
scale is located for automatic
search or manually add

If the status bar displays “Offline”, the communication failed. Please check if the network
is well connected, re-plug the network cable, and check if the device address is correct. If the
device address is incorrect, please click "Device Group" to re-add the device.
Note: The program can search for devices across network segments. As long as the computer
can PING device successfully, type the address of device [Link].255 in the device address
bar, and then click “Search” to search all the device address of XXX segments.
If the status bar displays “Online”, the communication succeeds. Data can be uploaded
or downloaded via LINK69. Click the device column to check the status, address, hotkey of the
device, or read/save device parameters, read configuration file, etc.
2. Scale Parameters:
① Scale already connected with PC:

PLU download:
①All PLU: Download all PLU regardless of department;
②Download PLU by department: Double click to select
the corresponding department and download PLU.

1 Select device, click “▼” to check or set device parameters

Note: Select a device and right-click to select “Empty” to clear all devices on LINK69.

5
 2 Click on the parameter information bar to change it

3 After modified, click “Write params”

② Scale does not connect with PC:

1 Click “Create Params” (Scale parameters can be

edited when LINK69 is not connected to the device)

2 Open saved parameters for scale

parameter editing

5 The edited parameter information

can be downloaded to each scale

4 Click here to save parameter after editing

3 Edit scale parameter here

6
3 Label Editor
1 Click “Label Editor” to enter label edit interface

2 Click “New” 6 Click here to download label to scale 11 Click here to upload label info from
scale to LINK69 and edit it

Any element’s properties of the label can

be modified such as font, size and other
properties in this Property edit area.

5 Click “Save” after editing 3 Select the label No. (1-32), width & height
(customizable, recommended 56*40 for 2”
printer), model and the label version (M3) in
this interface and then click “OK”

4 Choose label elements in this field →

click the mouse on the right blank label
→ select each label element for edition
on the right side “Property” column

Note: 2”printer: width ≤56, height ≤120

3”printer: width ≤72, height ≤120

7 Type IP address here

9 Select labels here

8 Or, select
Click “Select All” will batch download
scales here
labels that are opened in the editor interface
to load label
to the scale.
Note: The label No. of batch download
should not repeat, otherwise the label will
be overwritten and downloaded.

10 Click “Execute”

Note: Click this icon can open existing label on the PC.
Warning: Please refer to the default label template to custom label content to avoid
excessive print information and shorten the lifetime of printer head.
7
4 PLU Information
Click “PLU” to enter PLU edit interface Click “IP” to show the local IP address & QR Code

Note: Click here to check device and clear device data. This
operation only clear PLU data, Note 1/2/3/4 and Message
of scale, and it will not clear the hotkey data.
4.1 PLU Edit
There are three methods to import PLU to LINK69.
1. Import PLU Data from PC to LINK69
To import the edited PLU data from PC to LINK69, please click “Data Import” → “PLU
Info”, select the PLU file location, then to import the pre-set PLU information to LINK69.

Data Export: Export file from LINK69 to PC.

Data Import: Import existed data from PC to LINK69 for
convenience to download it to the scale.

1 Click “Data Import” → “PLU Info”

2 Select the file to import

3 Click “Open” to import

8
2. Upload PLU Data from Scale to LINK69
Click “Upload” in the PLU interface to upload PLU data from scale to LINK69:

1 Click “PLU” to enter

2 Click “Upload”
PLU edit interface

4 Type scale IP here

3 Check the data 5 Or, check the scale here

needed to upload

6 Click “Upload”

9
3. Custom Import Data

1 Click “Tool” →“Custom

Import Data”

3 Click “Select” 2 Set import mode, code format,

import row and decollator here

4 Select the file, then click

“Open” here to import data

10
 7 Select corresponding third-
party file column here

6 Click 69 Field needed here

8 Here shows the corresponding file column number

9 Edit Setting/Default value here

10 Click “Import Data” after association completed

11
Data import completed:

Click “Details” to check or edit

more information of PLU

Double-click the PLU column can edit PLU information.

Click drop-down box to select main (label

1)/auxiliary (label 2) label number. When
the auxiliary label is set to empty or 0, it
means to use scale default label.

12
Note: Note can be added here, and the Note is long information.

Click here to download it to the

scale after editing

Click here to choose discount mode

13
 After selecting the discount, click “Select”

Note: The discount schedule can be set in “Discount” interface, please refer to Chapter 4.6.

Note: If the Note Info are not enough, the

Additional Info can be used as a supplement. The
Additional Info is long information.

14
Right click PLU can setup column, add PLU, edit
PLU information, delete an item, select all items
for bulk editing, empty the PLU information or
download selected PLU/PLU image.

15
4. Columns Setup
Right click the PLU and click “Column Setup”, choose a caption on the pop-up window,
then click “Up” or “Down” to adjust the caption location. “Up” means to adjust the caption
to a prior location, and “Down” means to a next location. Click “Save” after setting.

5. Bulk Editing
Right click PLU → click “Select All” → right click PLU → click “Bulk Editing” on the
pop-up window → check behind item that needs to be modified and edit → click “Save”.

16
 1 Check item and then bulk
editing here

2 Click “Save” after editing

E.g.: Bulk editing PLU label number.

Enter bulk editing mode according to the
operation above, check “Label 1” (Main
label) and “Label 2” (Auxiliary label) to
choose the label number, then click “Save”

Note: When the auxiliary label No. is 0, it means not to print auxiliary label. When the main
label No. and auxiliary label No. is empty or 0, it means to use scale default label No.

1 Click “Note Info”, check “Note 1” to add

note here. The note is long information

2 Click “Save” after editing

17
4.2 Package Type

[Link]
If the package type is set to “Default”, the item will be sold without packaging.
[Link] Weight Mode
For the item that needs to be packaged and sold in fixed weight, it is necessary to set
the fixed weight mode in Package Type under LINK69.
E.g.: 1kg apples are sold in a fixed weight package, the unit price is 10＄/kg:
1. Click “PLU”, double-click the line where “apple” is to enter PLU edit mode;
2. Click “Details” → “Product Info”;
3. Set “Package Type” to “Fixed Weight Mode”, type the package weight “1” in the
“Package Weight”, and type the allowable error percentage, e.g., “5%” in the
“Package Range”;
4. Click “Save” after editing;
5. Click “Download” to download the edited PLU data to the scale;
6. Put the items within the set package error range on the scale to carry out fixed weight
packaging sales.

Note: The unit of packaging weight depends on the unit of the PLU.

18
[Link] Price Mode
For the item that needs to be packaged and sold in fixed price, it is necessary to set the
fixed price mode in Package Type under LINK69.
E.g.: 1kg apples are sold in a fixed price package, the unit price is 10＄/kg:
1. Click “PLU”, double-click the line where “apple” is to enter PLU edit mode;
2. Click “Details” → “Product Info”;
3. Set “Package Type” to “Fixed Price Mode”, type the package price “1” in the
“Package Price”, and type the allowable error percentage, e.g., “5%” in the “Package
Range”;
4. Click “Save” after editing;
5. Click “Download” to download the edited PLU data to the scale;
6. Put the items within the set package error range on the scale to carry out fixed price
packaging sales.

Note: The unit of packaging price depends on the unit of the PLU.

19
[Link] Weight and Price Mode (Gift Baskets)
For the items that needs to be sold with fixed weight and price packaging, that is, gift
baskets, it is necessary to set the fixed weight and price mode in Package Type under LINK69.
The Gift Baskets is suitable for processing gift boxes, gift baskets and platter sales.
1. Click “PLU”, select a line as the hotkey of “Gift Baskets”, double-click it to enter PLU edit
mode;
2. Click “Details”, set the name as “Gift Baskets”, and type “0” in the “Unit Price”;
3. Set “Package Type” to “Fixed Weight and Price Mode” under “Product Info”;
4. There are two types of settings in the “Package Weight”:
Type A: Each item in the basket is printed with a label during the weighing process, and
a summary label is printed at the end.
This type of “Package Weight” has three modes, which correspond to different weight
units, and can be set according to the actual PLU unit:
Package Weight Column Corresponding Unit
1 50g
0.001 Kg、lb
0.01 oz
Type B: No labels are printed for each item in the basket during the weighing process,
only a summary label is printed at the end.
The “Package Weight” of this type should be set to “0”;
5. Click “Save” after editing;
6. Click “Download” to download the edited PLU data to the scale;
7. Press “Gift Baskets” key, type LFCode (e.g.: 950002), then click “ENTER” to confirm;
8. Put the gift basket items on the scale in turn (for example: apples, oranges, grapes, etc.),
and press the corresponding hotkey for the item to weigh;
9. Press the "Gift Baskets" key again after weighing.
Note: In manual print mode, before weighing the next item, the “Print” key should be
pressed first after pressing the hotkey for each item placed.
Here takes the unit price “0”, unit “kg” and package weight “0.001” as an example:

20
[Link] Weight Mode (Weight Range)
For the item that needs to be packaged and sold in fixed weight (weight range), it is
necessary to set the fixed weight mode (weight range) in Package Type under LINK69.
E.g.: 1kg apples are sold in a fixed weight (weight range) package, the unit price is 10＄/kg:
1. Click “PLU”, double-click the line where “apple” is to enter PLU edit mode;
2. Click “Details” → “Product Info”;
3. Set “Package Type” to “Fixed Weight Mode (Weight Range)”, type the package weight
“1” in the “Package Weight”, and type the minimum weight/maximum weight allowed
in the “Weight Range”;
4. Click “Save” after editing;
5. Click “Download” to download the edited PLU data to the scale;
6. Put the items within the set weight range on the scale to carry out fixed weight (weight
range) packaging sales.

Note: The unit of packaging weight depends on the unit of the PLU.

21
[Link] Price Mode (Weight Range)
For the item that needs to be packaged and sold in fixed price (weight range), it is
necessary to set the fixed price mode (weight range) in Package Type under LINK69.
E.g.: 1kg apples are sold in a fixed price (weight range) package, the unit price is 10＄/kg:
1. Click “PLU”, double-click the line where “apple” is to enter PLU edit mode;
2. Click “Details” → “Product Info”;
3. Set “Package Type” to “Fixed Price Mode (Weight Range)”, type the package price “1”
in the “Package Price”, and type the minimum weight/maximum weight allowed in the
“Weight Range”;
4. Click “Save” after editing;
5. Click “Download” to download the edited PLU data to the scale;
6. Put the items within the set weight range on the scale to carry out fixed price (weight
range) packaging sales.

Note: The unit of packaging price depends on the unit of the PLU.

22
4.3 Department

1 Click “Department” to 4 Click “Download” to download

enter department edit data to the scale
interface

2 Click “Modify” or double click a bar to

modify department name

3 Or, to edit department information here

4.4 Unit

1 Click “Unit” to enter unit 5 Click “Download” to download

edit interface data to the scale

2 Click “Modify” or double click

a bar to modify unit name

4 To edit currency symbol here,

e.g.: ￥, ＄, €, ￡, etc.

Note: This setting is for the quantity unit

of LH51 model, and the operation
method is the same as that on the left
3 Or, to edit unit information here side, which will not be described here

23
4.5 Category

1 Click “Category” to enter

category edit interface

6 Click “Download” to download

data to the scale

5 Click “Save”
4 Select or delete
category picture here
2 Click “Modify” or double click a bar
to modify category name

3 Or, to edit category information here

Note: Parent category only available for Touch Scale.
One parent category can contain several categories.
Parent Category ＞ Category

E.g.: Set “Fruit” as the parent category, “Tropical Fruit” and “Special Fruit” as the
categories under the parent category. After editing the category information, please
download it to the touch scale, and the interface will show as below:

Categories

PLU in ‘Tropical Fruit’ category

Parent Category

24
4.6 Discount

1 Click “Discount” to enter discount

edit interface

6 Click “Save”

2 Click “Modify” or double click a

bar to modify discount table

3 Three types of discount mode for

editing
4 Check “Enable” to set
discount mode here

5 Set discount time range,

total price range and weight
range here

Note: The discount can be used in “Other Info” of PLU edit. Click the button shows as below
can callout discount table for choose.

Click this button to choose discount

25
4.7 Tare

1 Click “File” →
“Tare” to enter tare
edit interface

3 Click “Save” after editing 4 Click “Download” to download

data to the scale

2 Click “Modify” or double click a

bar to modify tare information

26
4.8 Custom Barcode

1 Click “Custom Barcode” to 7 Click “Download” to

enter barcode edit interface download data to the scale

6 Click “Save”

5 Click each dropdown box to select

corresponding barcode rules

3 Click “Modify”
or double click a
bar to modify
barcode info
4 Click each dropdown box to select
barcode type such as Weight, Unit
Price, Total price, etc.

2 Select barcode ID (150~250

code can be edited)

Note: The barcode can be selected in “Base Info” of PLU edit. ID 1-98 barcodes are the fixed
barcode type, and ID 150-250 are the custom barcode type.

27
4.9 AI Picture Association (for AI scale)

1 Click “AI Picture Association”

2 Select an association mode

based on actual requirements

3 Select upload interval

4 Check scale here

5 Click “upload and auto-associate”

6. The picture is automatically associated with PLU. Click the picture can adjust the association
when needed.
7. After the association is completed, click “Download” can download it to the scale.

28
4.10 Label Scale Hotkey

4.10.1 Label Scale Hotkey Edit

(The following operation take the double-line hotkey data as an example.)
1. Hotkey generates and downloads:

1 Click “Hotkey”

2 Click here to select

the hotkey needed
4 Click “Auto Generate”, select “All PLU Generate Double Line”
Note: There must have data exist in the PLU information in order
Note: Click here to upload hotkey to auto generate hotkey.
from scale to LINK69, meanwhile, the
scale’s PLU info should be upload to
LINK69 in order to display the hotkey.
3 Or, click “New Hotkey Sheet”
to select scale model to create
the hotkey

7 Double click the hotkey to 6 Edit hotkey name and

modify the hotkey PLU by hotkey display name here
modifying the LFCode
5 Hotkey generate
automatically

10 Click here to check scale in the popup window to download

this hotkey, then click “Download”, the hotkey will be
downloaded to the scale selected

29
 Select single, part or all PLU (hold and drag the mouse to select) → right click → click
“Upper Button” (or “Second Line of Key”, “Key” means both upper button and second line
of key) to edit it as below:

8 Hotkey Background, Color,

Font, PLU Select can be set here

9 Click “Function Key” to

customize the hotkey function
such as Temporary Change
PRICE, Cash Discount, Copy, etc.

30
2. Move and Insert PLU → Cover Original Hotkey

1 Click “Lemon”

2 Click “Move and Insert”

3 Select PLU needed

(support multi-choice)

4 Click “Select”

31
 5 Click “Cover”

6 The original hotkey already be

covered (Note: click the upper
part of the button to operate the
upper function key, and the lower
port of the key is the same)

32
3. Move and Insert → Supplant Original Hotkey

1 Click “beef”

2 Click “Move and Insert”

3 Select PLU needed

(support multi-choice)

4 Click “Select”

33
 5 Click “Supplant”

6 Hotkey postpone, and the last hotkey is

pushed to the next hotkey (Note: click the
upper part of the button to operate the upper
function key, and the lower port of the key is
the same.)

34
4. Exchange

2 Click the hotkey in the picture

3 Hotkey exchange complete (Note:

hotkey exchange allows interchange
between the upper part of keys, the
lower part of keys, and the upper part
and the lower part of keys.)

1 Click “Exchange”

5. Cover Original Hotkey

2 Click “Orange”

3 Click “Olive” 5 Move and cover original hotkey

completed (Note: Cover Original
Hotkey allows move and cover
between the upper part of keys, the
lower part of keys, and the upper
1 Click “Cover Original Hotkey”
part and lower part of keys.)

4 Click “OK”

35
6. Push Forward

2 Click “Pistachio”

3 Click “Pepper” 4 Hotkey push forward completed

(Note: forward only) (Push Forward allows push hotkey
forward between the upper part of
keys, the lower part of keys, and the
1 Click “Push Forward”
upper part and lower part of keys.)

5 Click “Print” after editing

36
4.10.2 Hotkey Sheet Installation
Cut the printed hotkey sheet with scissors or blade, and insert it under the keypad sheet.

No. Description Picture

1 Cut the hotkey sheet down.

Push up the keypad sheet from

2
bottom according to the arrow.

Insert the hotkey sheet into the

3
keypad sheet.

37
5 Notice Info

1 Click “File” → “Notice Info”

2 To edit Header Info/Footer Info/Notice/Label Ad Here.

The info can be used in label edit (Label Editor → Text)

38
6 Message

1 Click “File” → “Message”

2 Click “New” to add new message, click

“Modify” or double click a bar to modify
the message. Click “Save” after editing

3 The message can be edited here (up to 8 lines)

Note: The message can be selected in “Other Info” of PLU edit.

39
7 Cashier

1 Click “File” → “Cashier”

2 Click “New” to add new message, click

“Modify” or double click a bar to modify
the message. Click “Save” after editing

40
8 User Manager

1 Click “File” → “User Manager”

2 Click here to add user or modify

the authority management of
user existed

3 Check authority management

here, then click “Save”

41
9 Download Schedule
Click “Auto Download” or click “Tool” → “Download Schedule” to enter download
schedule interface.

1 Check “Import Third-party Intermediate Database”

2 Select “MySQL”, then click “OK”

42
3 Type server name, database 4 Click “Script Config”
name, login name and password,
click “Connection Test” to check
the connection

5 Click “Script Example”

43
 6 Edit script according to the example

7 If check this item, the memo field will 8 Copy the script after
appear in the script example editing, then click “Exit”

44
 9 Paste the SQL script edited
here, then click “Query Test”

10 Here will show detail info if

succeed, then click “OK”

11 Click “Import All Data” for first time using,

the system will auto-import all data

45
12 Download progress can be viewed after click “PLU”

13 View the download progress here

46
14 If check “Pop-up window shows the download progress
during automatic download” under “Param Settings”, the
download progress information can be displayed when
updates are automatically downloaded

15 Click “PLU Modification Log” under “Log”

to view the PLU modification information

16 Click “Scale Download Log”

under “Log” to view relevant
information of scale download

47
10 Association File Download

1 Click “Tool” → “Association

File Download”

3 Double-click here to select

PLU File or PLU Update File
2 Check scale here

4 Check Execution Mode here

Note: If the “Association File Download” is enabled when the “Download Schedule” is
running, the “Download Schedule” will be invalid.
48
11 Cloud Scale Web Param Settings (for ZM3 model)

1 Click “Tool” → “Cloud Scale

Web Param Settings”

2 Check scale here

3 Set basic parameters and MQTT

parameters here, then click
“Download param to scale”

49
12 Journal
1 Click “Report” → “Journal”

2 Click “Upload”

4 Check scale here

3 Check “Journal”

5 Click “Upload”

7 Click “Search” 9 Click “Statistics Statement”

6 The Journal shows as below

50
 8 Select sales time, IP and other
information here, then click “Query”
for details

10 Save statistics statement in text format,

download hot products or perform picture
association here

51
13 Change Password
1. Click “Tool” → “Change Password”;
2. Type original password and new password in the pop-up window, then click “OK”.

52
14 Update Label Scale Firmware
Please make sure that the PC is well-connected with Scale.

1 Click “Tool”

2 Click “Update Firmware”

3 Click “OK”

4 Select the program to update

5 Click “Open”

6 Check scale here

7 Click “Download”

Click “Complete” after downloading the program.

53
15 Update Label Scale Font
Please make sure that the PC is well-connected with Scale.

1 Click “Tool”

2 Click “Update Font”

3 Check scale here

4 Click “Download”

5 Click “Complete” after sync finished

54
16 Language & Software Version
Click “Help” → “Language” to switch language which including Simplified Chinese,
English, Spanish, etc.

Click “Help” → “About” to view the software version.

55
17 Windows
When update font or firmware, click blank area outside the update window can minimize
the update window. Click “Windows” can view the update progress.

56
18 Touch Scale Hotkey

1. Hotkey Description
Note: Make sure there are PLU data and Category data in the LINK69 before editing the hotkey.

1 Click “TSX Hotkey”

2 Check the scale, then click

“Upload” to upload hotkey
from scale to LINK69

Edit category info here

Function keys for auto generate hotkey,

rearrange PLU, clear current hotkey, open
saved hotkey and save the hotkey

Edit line & column of hotkey

4 Click here to choose category

for edit

3 Click here to generate

hotkey automatically

57
2. Delete Hotkey

1 Select the hotkey

to delete

2 Click “Delete”

3. Hotkey Exchange

2 Click the hotkey to exchange,

e.g.: “peer” and “chili”

1 Click “Exchange”. After clicking

“Exchange”, the word “Cancel”
appears. (If there is no need to
exchange PLU, please click “Cancel”.)

58
 3 Hotkey exchange completed

4. Move and Insert PLU → Cover Original Hotkey

1 Click “peer”

2 Click “Move and Insert PLU”

59
 3 Check PLU here

4 Click “Select”

5 Click “Cover”

6 The original hotkey

already been covered

60
5. Move and Insert PLU → Supplant Original Hotkey

1 Click “fish”

2 Click “Move and Insert PLU”

3 Check PLU here

4 Click “Select”

61
5 Click “Supplant”, here takes “Start from
the selected position” as an example

6 Hotkey postponed

62
19 Touch Scale Image Management
1 Click “Image Management” in PLU interface

2 Click “Import Gallery”

Note: Input LFCode/Item Number/Product

Name here can search the PLU directly

3 Select the image path, then click

here to import image

63
 4 Click PLU, e.g.: “apple”

5 Click corresponding image

6 Click “Associate”

9 After association, click here

to download image
7 After successfully
associated, the PLU font
color will turn to red, the
color of PLU image font 8 Check here to preview the
also will be red PLU image when clicking on
the PLU

Note: 1. If the name of PLU image is the same with PLU LFCode, the PLU will automatically associate with
image after import gallery.
E.g.: The LFCode of apple is “100001”, and the name of apple image is “[Link]”. After importing
gallery, the PLU of apple will automatically associate with the image named “[Link]”.
2. The PLU data and Category must be downloaded before downloading the hotkey data. The PLU image
must be downloaded after the hotkey is downloaded.
64
20 Appendix: Barcode Coding List
Barcode Type Department Article Number Total Price Weight Checksum
00~09: Ean13 code, the front two codes represent department code:
00 DD(2) IIIIIIIIII(10) X X C
01 DD(2) IIIIII(6) PPPP(4) X C
02 DD(2) IIIII(5) PPPPP(5) X C
03 DD(2) IIII(4) PPPPPP(6) X C
04 DD(2) III(3) PPPPPPP(7) X C
05 DD(2) IIIIII(6) X [Link](4) C
06 DD(2) IIIIII(6) X [Link](4) C
07 DD(2) IIIII(5) X [Link](5) C
08 DD(2) IIIII(5) X WWWW.W(5) C
09 DD(2) IIIII(5) X WWWWW(5) C
10~19: Ean13 code, the front two codes represent fixed code:
10 20(2) IIIIIIIIII(10) X X C
11 21(2) IIIIII(6) PPPP(4) X C
12 22(2) IIIII(5) PPPPP(5) X C
13 23(2) IIII(4) PPPPPP(6) X C
14 24(2) III(3) PPPPPPP(7) X C
15 25(2) IIIIII(6) X [Link](4) C
16 26(2) IIIIII(6) X [Link](4) C
17 27(2) IIIII(5) X [Link](5) C
18 28(2) IIIII(5) X WWWW.W(5) C
19 29(2) IIIII(5) X WWWWW(5) C
20: No print barcode
21~29: Ean13 code, the front one code represents department code:
21 D(1) IIIIIII(7) PPPP(4) X C
22 D(1) IIIIII(6) PPPPP(5) X C
23 D(1) IIIII(5) PPPPPP(6) X C
24 D(1) IIII(4) PPPPPPP(7) X C
25 D(1) IIIIIII(7) X [Link](4) C
26 D(1) IIIIIII(7) X [Link](4) C
27 D(1) IIIIII(6) X [Link](5) C
28 D(1) IIIIII(6) X WWWW.W(5) C
29 D(1) IIIIII(6) X WWWWW(5) C
30~35: 18 code, the front one code represents department code:
30&33 D(1) IIIIII(6) PPPPP(5) [Link](5) C
31&34 D(1) IIIIII(6) PPPPP(5) WWWW.W(5) C
32&35 D(1) IIIIII(6) PPPPP(5) WWWWW(5) C

Barcode Type Department Article Number Unit Price Weight Checksum

40~45: 18 code, the front one code represents department code:
40&43 D(1) IIIIII(6) UUUUU(5) WW．WWW(5) C

65
 41&44 D(1) IIIIII(6) UUUUU (5) WWWW.W(5) C
42&45 D(1) IIIIII(6) UUUUU (5) WWWWW(5) C

Barcode Type Department Article Number Total Price Weight Checksum

46: 18 code
46 DD(2) IIIIII(6) PPPPP(5) WWWWW(5) X
50~55: 8 code
50 X IIIIIII(7) X X C
51 D(1) IIIIII(6) X X C
52 DD(2) IIIII(5) X X C
53 X IIIIIIII(8) X X X
54 D(1) IIIIIII(7) X X X
55 DD(2) IIIIII(6) X X X

Barcode Type Department Article Number Total/Unit Price Weight Checksum

60~65: ISBN code, one kind of 18 code:
60 D(1) IIIIII(6) PPPPP(5) [Link](5) C
61 D(1) IIIIII(6) PPPPP(5) WWWW.W(5) C
62 D(1) IIIIII(6) PPPPP(5) WWWWW(5) C
63 D(1) IIIIII(6) [Link](5) [Link](5) C
64 D(1) IIIIII(6) [Link](5) WWWW.W(5) C
65 D(1) IIIIII(6) [Link](5) WWWWW(5) C

Barcode Type Department Article Number Quantity/Weight Total/Unit Price Checksum

79~85, 87: 18 code
79 DD IIIIII(6) [Link] PPPPP X
80 D IIIIII(6) [Link] PPPPP C
81 D IIIIII(6) WWWW.W PPPPP C
82 D IIIIII(6) WWWWW PPPPP C
83 D IIIIII(6) [Link] [Link] C
84 D IIIIII(6) WWWW.W [Link] C
85 D IIIIII(6) WWWWW [Link] C
87 DD IIIII(5) [Link] PPPPP C

Barcode Type Department Article Number Total Price Quantity/Weight Unit Price Checksum
90~95: 18 code, the front two codes represent department code:
90 DD(2) IIIIII(6) [Link] [Link](4) C
91 DD(2) IIIIII(6) WWWW.W [Link](4) C
92 DD(2) IIIIII(6) WWWWW [Link](4) C
93 D(1) IIIIII(6) PPPPP(5) [Link](5) C
94 DD(2) IIIII(5) PPPPP(5) [Link] C
95 DD(2) IIIIII(6) WWWWW [Link](4) C

66
 Barcode Type Department Article Number Quantity/Weight Total Price Unit Price Checksum
96 DD(2) IIIIII(6) [Link] PPPPP(5) C

Barcode Type Department Article Number Total Price Quantity/Weight Unit Price Checksum
97 DD(2) IIII(4) PPPPPP(6) [Link] C

Barcode Type Department Article Number Unit Price Quantity/Weight Total Price Checksum
98 DD(2) IIIII(5) UUUUU(5) [Link] C

Meaning of characters in the table:

C: Checksum
D: Department code
2: Fixed number“2”
I: Article number
L: LFCode
P: Total price
U: Unit price
R: Discount
W: Weight
X: No

Note:
1 Ean13 code = DEPARTMENT + CODE + [TOTAL PRICE] + [WEIGHT] + C
The items with [] indicates that this item is not available in some encoding modes.
2 For Ean13 code, the barcode type is usually 2 (or 22) for price barcode and 7 (or 27) for
weight barcode.
3 Checksum is automatically calculated by the scale, and the user does not need to type this
item in the software.
4 The difference between the 30-32 and 33-35 formats is that the calculation method of
CHECKSUM is different.
5 The difference between the 40-45 and 30-35 formats is that the price in 30-35 is total price
while in 40-45 is unit price.
6 60-65 are ISBN code.
7 The calculation method of EAN13 code check code Z:
(Sum of even digits*3) + Sum of odd digits + Z = Multiples of 10
8 Two calculation methods of 18code check code Z:
Method 1: Same as EAN13 (barcode type: 30-32, 40-42);
Method 2: (Sum of odd digits*3) + Sum of even digits + Z = Multiples of 10 (barcode type:
33-35, 43-45)

67