<?xml version="1.0" encoding="utf-8"?

>
<!DOCTYPE eagle SYSTEM "[Link]">
<eagle version="9.0.1">
<drawing>
<settings>
<setting alwaysvectorfont="no"/>
<setting verticaltext="up"/>
</settings>
<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1"
display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
<layers>
<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
<layer number="2" name="Route2" color="1" fill="3" visible="no" active="yes"/>
<layer number="3" name="Route3" color="4" fill="3" visible="no" active="yes"/>
<layer number="4" name="Route4" color="1" fill="4" visible="no" active="yes"/>
<layer number="5" name="Route5" color="4" fill="4" visible="no" active="yes"/>
<layer number="6" name="Route6" color="1" fill="8" visible="no" active="yes"/>
<layer number="7" name="Route7" color="4" fill="8" visible="no" active="yes"/>
<layer number="8" name="Route8" color="1" fill="2" visible="no" active="yes"/>
<layer number="9" name="Route9" color="4" fill="2" visible="no" active="yes"/>
<layer number="10" name="Route10" color="1" fill="7" visible="no" active="yes"/>
<layer number="11" name="Route11" color="4" fill="7" visible="no" active="yes"/>
<layer number="12" name="Route12" color="1" fill="5" visible="no" active="yes"/>
<layer number="13" name="Route13" color="4" fill="5" visible="no" active="yes"/>
<layer number="14" name="Route14" color="1" fill="6" visible="no" active="yes"/>
<layer number="15" name="Route15" color="4" fill="6" visible="no" active="yes"/>
<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
<layer number="20" name="Dimension" color="24" fill="1" visible="yes"
active="yes"/>
<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>
<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>
<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>
<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>
<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>
<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>
<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>
<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>
<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>
<layer number="39" name="tKeepout" color="4" fill="11" visible="yes" active="yes"/>
<layer number="40" name="bKeepout" color="1" fill="11" visible="yes" active="yes"/>
<layer number="41" name="tRestrict" color="4" fill="10" visible="yes"
active="yes"/>
<layer number="42" name="bRestrict" color="1" fill="10" visible="yes"
active="yes"/>
<layer number="43" name="vRestrict" color="2" fill="10" visible="yes"
active="yes"/>
<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>
<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>
<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>
<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>
<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>
<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>
<layer number="51" name="tDocu" color="7" fill="1" visible="yes" active="yes"/>
<layer number="52" name="bDocu" color="7" fill="1" visible="yes" active="yes"/>
<layer number="88" name="SimResults" color="9" fill="1" visible="yes"
active="yes"/>
<layer number="89" name="SimProbes" color="9" fill="1" visible="yes" active="yes"/>
<layer number="90" name="Modules" color="5" fill="1" visible="yes" active="yes"/>
<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>
<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>
<layer number="93" name="Pins" color="2" fill="1" visible="yes" active="yes"/>
<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>
<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>
<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>
<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>
<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>
</layers>
<library>
<packages>
<package name="SOT23-6">
<smd name="1" x="-0.95" y="-1.0625" dx="0.355" dy="0.575" layer="1"/>
<smd name="2" x="0" y="-1.0625" dx="0.355" dy="0.575" layer="1"/>
<smd name="3" x="0.95" y="-1.0625" dx="0.355" dy="0.575" layer="1"/>
<smd name="4" x="0.95" y="1.0625" dx="0.355" dy="0.575" layer="1"/>
<smd name="5" x="0" y="1.0625" dx="0.355" dy="0.575" layer="1"/>
<smd name="6" x="-0.95" y="1.0625" dx="0.355" dy="0.575" layer="1"/>
<wire x1="-1.25" y1="0.56" x2="1.25" y2="0.56" width="0.127" layer="21"/>
<wire x1="1.25" y1="0.56" x2="1.25" y2="-0.56" width="0.127" layer="21"/>
<wire x1="1.25" y1="-0.56" x2="-1.25" y2="-0.56" width="0.127" layer="21"/>
<wire x1="-1.25" y1="-0.56" x2="-1.25" y2="0.56" width="0.127" layer="21"/>
<circle x="-0.8765" y="-0.188" radius="0.128315625" width="0" layer="21"/>
<text x="-3.303" y="1.9985" size="1.27" layer="25">&gt;NAME</text>
<text x="-3.483" y="-3.1375" size="1.27" layer="27">&gt;VALUE</text>
</package>
</packages>
<symbols>
<symbol name="PIC10F200/202">
<pin name="GP3/!MCLR!/VPP" x="27.94" y="12.7" length="middle" rot="R180"/>
<pin name="VDD" x="27.94" y="0" length="middle" direction="pwr" rot="R180"/>
<pin name="GP2/T0CKI/FOSC4" x="27.94" y="-12.7" length="middle" rot="R180"/>
<pin name="GP0/ICSPDAT" x="-27.94" y="12.7" length="middle"/>
<pin name="VSS" x="-27.94" y="0" length="middle" direction="pwr"/>
<pin name="GP1/ICSPCLK" x="-27.94" y="-12.7" length="middle"/>
<wire x1="-22.86" y1="22.86" x2="22.86" y2="22.86" width="0.254" layer="94"/>
<wire x1="22.86" y1="22.86" x2="22.86" y2="-22.86" width="0.254" layer="94"/>
<wire x1="22.86" y1="-22.86" x2="-22.86" y2="-22.86" width="0.254" layer="94"/>
<wire x1="-22.86" y1="-22.86" x2="-22.86" y2="22.86" width="0.254" layer="94"/>
<text x="-5.08" y="-20.32" size="1.27" layer="97">PIC10F200/202</text>
<text x="-22.86" y="25.4" size="1.27" layer="95">&gt;NAME</text>
<text x="-22.86" y="-27.94" size="1.27" layer="96">&gt;VALUE</text>
</symbol>
<symbol name="PIC10F204/206">
<pin name="GP3/!MCLR!/VPP" x="30.48" y="12.7" length="middle" rot="R180"/>
<pin name="VDD" x="30.48" y="0" length="middle" direction="pwr" rot="R180"/>
<pin name="GP2/T0CKI/COUT/FOSC4" x="30.48" y="-12.7" length="middle" rot="R180"/>
<pin name="GP0/ICSPDAT/CIN+" x="-30.48" y="12.7" length="middle"/>
<pin name="VSS" x="-30.48" y="0" length="middle" direction="pwr"/>
<pin name="GP1/ICSPCLK/CIN-" x="-30.48" y="-12.7" length="middle"/>
<wire x1="-25.4" y1="22.86" x2="25.4" y2="22.86" width="0.254" layer="94"/>
<wire x1="25.4" y1="22.86" x2="25.4" y2="-22.86" width="0.254" layer="94"/>
<wire x1="25.4" y1="-22.86" x2="-25.4" y2="-22.86" width="0.254" layer="94"/>
<wire x1="-25.4" y1="-22.86" x2="-25.4" y2="22.86" width="0.254" layer="94"/>
<text x="-5.08" y="-20.32" size="1.27" layer="97">PIC10F204/206</text>
<text x="-25.4" y="27.94" size="1.27" layer="95">&gt;NAME</text>
<text x="-25.4" y="-27.94" size="1.27" layer="96">&gt;VALUE</text>
</symbol>
<symbol name="PIC10F220/222">
<pin name="GP3/!MCLR!/VPP" x="30.48" y="12.7" length="middle" rot="R180"/>
<pin name="VDD" x="30.48" y="0" length="middle" direction="pwr" rot="R180"/>
<pin name="GP2/T0CKI/FOSC4" x="30.48" y="-12.7" length="middle" rot="R180"/>
<pin name="GP0/AN0/ICSPDAT" x="-30.48" y="12.7" length="middle"/>
<pin name="VSS" x="-30.48" y="0" length="middle" direction="pwr"/>
<pin name="GP1/AN1/ICSPCLK" x="-30.48" y="-12.7" length="middle"/>
<wire x1="-25.4" y1="22.86" x2="25.4" y2="22.86" width="0.254" layer="94"/>
<wire x1="25.4" y1="22.86" x2="25.4" y2="-22.86" width="0.254" layer="94"/>
<wire x1="25.4" y1="-22.86" x2="-25.4" y2="-22.86" width="0.254" layer="94"/>
<wire x1="-25.4" y1="-22.86" x2="-25.4" y2="22.86" width="0.254" layer="94"/>
<text x="-25.4" y="27.94" size="1.27" layer="95">&gt;NAME</text>
<text x="-25.4" y="-27.94" size="1.27" layer="96">&gt;VALUE</text>
<text x="-7.62" y="-20.32" size="1.778" layer="97">PIC10F220/222</text>
</symbol>
<symbol name="PIC10(L)F320/322">
<pin name="RA3/!MCLR!/VPP" x="30.48" y="12.7" length="middle" rot="R180"/>
<pin name="VDD" x="30.48" y="0" length="middle" direction="pwr" rot="R180"/>
<pin name="RA2" x="30.48" y="-12.7" length="middle" rot="R180"/>
<pin name="ICSPDAT/RA0" x="-30.48" y="12.7" length="middle"/>
<pin name="VSS" x="-30.48" y="0" length="middle" direction="pwr"/>
<pin name="ICSPCLK/RA1" x="-30.48" y="-12.7" length="middle"/>
<wire x1="-25.4" y1="22.86" x2="25.4" y2="22.86" width="0.254" layer="94"/>
<wire x1="25.4" y1="22.86" x2="25.4" y2="-22.86" width="0.254" layer="94"/>
<wire x1="25.4" y1="-22.86" x2="-25.4" y2="-22.86" width="0.254" layer="94"/>
<wire x1="-25.4" y1="-22.86" x2="-25.4" y2="22.86" width="0.254" layer="94"/>
<text x="-25.4" y="27.94" size="1.27" layer="95">&gt;NAME</text>
<text x="-25.4" y="-27.94" size="1.27" layer="96">&gt;VALUE</text>
<text x="-10.16" y="-20.32" size="1.778" layer="97">PIC10(L)F320/322</text>
</symbol>
</symbols>
<devicesets>
<deviceset name="PIC10F200" prefix="MCU" uservalue="yes">
<description>&lt;h3&gt;Microchip PIC10F200&lt;/h3&gt;
The PIC10F200 device from Microchip
Technology are low-cost, high-performance, 8-bit,
fully-static, Flash-based CMOS microcontrollers. They
employ a RISC architecture with only 33 single-word/
single-cycle instructions. All instructions are single
cycle (1 s) except for program branches, which take
two cycles. The PIC10F200 device
deliver performance in an order of magnitude higher
than their competitors in the same price category. The
12-bit wide instructions are highly symmetrical,
resulting in a typical 2:1 code compression over other
8-bit microcontrollers in its class. The easy-to-use and
easy to remember instruction set reduces development
time significantly.
&lt;br /&gt;&lt;br /&gt;
Location: MCU/MICROCHIP</description>
<gates>
<gate name="G$1" symbol="PIC10F200/202" x="0" y="0"/>
</gates>
<devices>
<device name="SMD" package="SOT23-6">
<connects>
<connect gate="G$1" pin="GP0/ICSPDAT" pad="1"/>
<connect gate="G$1" pin="GP1/ICSPCLK" pad="3"/>
<connect gate="G$1" pin="GP2/T0CKI/FOSC4" pad="4"/>
<connect gate="G$1" pin="GP3/!MCLR!/VPP" pad="6"/>
<connect gate="G$1" pin="VDD" pad="5"/>
<connect gate="G$1" pin="VSS" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
<deviceset name="PIC10F202" prefix="MCU" uservalue="yes">
<description>&lt;h3&gt;Microchip PIC10F202&lt;/h3&gt;
The PIC10F202 device from Microchip
Technology are low-cost, high-performance, 8-bit,
fully-static, Flash-based CMOS microcontrollers. They
employ a RISC architecture with only 33 single-word/
single-cycle instructions. All instructions are single
cycle (1 s) except for program branches, which take
two cycles. The PIC10F202 device
deliver performance in an order of magnitude higher
than their competitors in the same price category. The
12-bit wide instructions are highly symmetrical,
resulting in a typical 2:1 code compression over other
8-bit microcontrollers in its class. The easy-to-use and
easy to remember instruction set reduces development
time significantly.

&lt;br /&gt;&lt;br /&gt;

Location: MCU/MICROCHIP</description>
<gates>
<gate name="G$1" symbol="PIC10F200/202" x="0" y="0"/>
</gates>
<devices>
<device name="SMD" package="SOT23-6">
<connects>
<connect gate="G$1" pin="GP0/ICSPDAT" pad="1"/>
<connect gate="G$1" pin="GP1/ICSPCLK" pad="3"/>
<connect gate="G$1" pin="GP2/T0CKI/FOSC4" pad="4"/>
<connect gate="G$1" pin="GP3/!MCLR!/VPP" pad="6"/>
<connect gate="G$1" pin="VDD" pad="5"/>
<connect gate="G$1" pin="VSS" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
<deviceset name="PIC10F204" prefix="MCU" uservalue="yes">
<description>&lt;h3&gt;Microchip PIC10F204&lt;/h3&gt;
The PIC10F204 device from Microchip
Technology are low-cost, high-performance, 8-bit,
fully-static, Flash-based CMOS microcontrollers. They
employ a RISC architecture with only 33 single-word/
single-cycle instructions. All instructions are single
cycle (1 s) except for program branches, which take
two cycles. The PIC10F204 device
deliver performance in an order of magnitude higher
than their competitors in the same price category. The
12-bit wide instructions are highly symmetrical,
resulting in a typical 2:1 code compression over other
8-bit microcontrollers in its class. The easy-to-use and
easy to remember instruction set reduces development
time significantly.

&lt;br /&gt;&lt;br /&gt;

Location: MCU/MICROCHIP</description>
<gates>
<gate name="G$1" symbol="PIC10F204/206" x="0" y="0"/>
</gates>
<devices>
<device name="SMD" package="SOT23-6">
<connects>
<connect gate="G$1" pin="GP0/ICSPDAT/CIN+" pad="1"/>
<connect gate="G$1" pin="GP1/ICSPCLK/CIN-" pad="3"/>
<connect gate="G$1" pin="GP2/T0CKI/COUT/FOSC4" pad="4"/>
<connect gate="G$1" pin="GP3/!MCLR!/VPP" pad="6"/>
<connect gate="G$1" pin="VDD" pad="5"/>
<connect gate="G$1" pin="VSS" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
<deviceset name="PIC10F206" prefix="MCU" uservalue="yes">
<description>&lt;h3&gt;Microchip PIC10F206&lt;/h3&gt;
The PIC10F206 device from Microchip
Technology are low-cost, high-performance, 8-bit,
fully-static, Flash-based CMOS microcontrollers. They
employ a RISC architecture with only 33 single-word/
single-cycle instructions. All instructions are single
cycle (1 s) except for program branches, which take
two cycles. The PIC10F206 device
deliver performance in an order of magnitude higher
than their competitors in the same price category. The
12-bit wide instructions are highly symmetrical,
resulting in a typical 2:1 code compression over other
8-bit microcontrollers in its class. The easy-to-use and
easy to remember instruction set reduces development
time significantly.

&lt;br /&gt;&lt;br /&gt;

Location: MCU/MICROCHIP</description>
<gates>
<gate name="G$1" symbol="PIC10F204/206" x="0" y="0"/>
</gates>
<devices>
<device name="SMD" package="SOT23-6">
<connects>
<connect gate="G$1" pin="GP0/ICSPDAT/CIN+" pad="1"/>
<connect gate="G$1" pin="GP1/ICSPCLK/CIN-" pad="3"/>
<connect gate="G$1" pin="GP2/T0CKI/COUT/FOSC4" pad="4"/>
<connect gate="G$1" pin="GP3/!MCLR!/VPP" pad="6"/>
<connect gate="G$1" pin="VDD" pad="5"/>
<connect gate="G$1" pin="VSS" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
<deviceset name="PIC10F220" prefix="MCU" uservalue="yes">
<description>&lt;h3&gt;Microchip PIC10F220&lt;/h3&gt;
The PIC10F220 device from Microchip
Technology are low-cost, high-performance, 8-bit, fully-
static Flash-based CMOS microcontrollers. They
employ a RISC architecture with only 33 single-word/
single-cycle instructions. All instructions are single-
cycle (1 s) except for program branches, which take
two cycles. The PIC10F220 devices deliver perfor-
mance in an order of magnitude higher than their com-
petitors in the same price category. The 12-bit wide
instructions are highly symmetrical, resulting in a
typical 2:1 code compression over other 8-bit
microcontrollers in its class. The easy-to-use and easy
to remember instruction set reduces development time
significantly.
&lt;br /&gt;&lt;br /&gt;
Location: MCU/MICROCHIP</description>
<gates>
<gate name="G$1" symbol="PIC10F220/222" x="0" y="0"/>
</gates>
<devices>
<device name="SMD" package="SOT23-6">
<connects>
<connect gate="G$1" pin="GP0/AN0/ICSPDAT" pad="1"/>
<connect gate="G$1" pin="GP1/AN1/ICSPCLK" pad="3"/>
<connect gate="G$1" pin="GP2/T0CKI/FOSC4" pad="4"/>
<connect gate="G$1" pin="GP3/!MCLR!/VPP" pad="6"/>
<connect gate="G$1" pin="VDD" pad="5"/>
<connect gate="G$1" pin="VSS" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
<deviceset name="PIC10F222" prefix="MCU" uservalue="yes">
<description>&lt;h3&gt;Microchip PIC10F222&lt;/h3&gt;
The PIC10F222 device from Microchip
Technology are low-cost, high-performance, 8-bit, fully-
static Flash-based CMOS microcontrollers. They
employ a RISC architecture with only 33 single-word/
single-cycle instructions. All instructions are single-
cycle (1 s) except for program branches, which take
two cycles. The PIC10F222 devices deliver perfor-
mance in an order of magnitude higher than their com-
petitors in the same price category. The 12-bit wide
instructions are highly symmetrical, resulting in a
typical 2:1 code compression over other 8-bit
microcontrollers in its class. The easy-to-use and easy
to remember instruction set reduces development time
significantly.
&lt;br /&gt;&lt;br /&gt;
Location: MCU/MICROCHIP</description>
<gates>
<gate name="G$1" symbol="PIC10F220/222" x="0" y="0"/>
</gates>
<devices>
<device name="SMD" package="SOT23-6">
<connects>
<connect gate="G$1" pin="GP0/AN0/ICSPDAT" pad="1"/>
<connect gate="G$1" pin="GP1/AN1/ICSPCLK" pad="3"/>
<connect gate="G$1" pin="GP2/T0CKI/FOSC4" pad="4"/>
<connect gate="G$1" pin="GP3/!MCLR!/VPP" pad="6"/>
<connect gate="G$1" pin="VDD" pad="5"/>
<connect gate="G$1" pin="VSS" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
<deviceset name="PIC10F320" prefix="MCU" uservalue="yes">
<description>&lt;h3&gt;Microchip PIC10F320&lt;/h3&gt;
6-Pin Flash-Based, 8-Bit Microcontroller
&lt;br /&gt;&lt;br /&gt;
Location: MCU/MICROCHIP</description>
<gates>
<gate name="G$1" symbol="PIC10(L)F320/322" x="0" y="0"/>
</gates>
<devices>
<device name="SMD" package="SOT23-6">
<connects>
<connect gate="G$1" pin="ICSPCLK/RA1" pad="3"/>
<connect gate="G$1" pin="ICSPDAT/RA0" pad="1"/>
<connect gate="G$1" pin="RA2" pad="4"/>
<connect gate="G$1" pin="RA3/!MCLR!/VPP" pad="6"/>
<connect gate="G$1" pin="VDD" pad="5"/>
<connect gate="G$1" pin="VSS" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
<deviceset name="PIC10LF320" prefix="MCU" uservalue="yes">
<description>&lt;h3&gt;Microchip PIC10LF320 eXtreme Low-Power&lt;/h3&gt;
6-Pin Flash-Based, 8-Bit Microcontroller
&lt;br /&gt;&lt;br /&gt;
Location: MCU/MICROCHIP</description>
<gates>
<gate name="G$1" symbol="PIC10(L)F320/322" x="0" y="0"/>
</gates>
<devices>
<device name="SMD" package="SOT23-6">
<connects>
<connect gate="G$1" pin="ICSPCLK/RA1" pad="3"/>
<connect gate="G$1" pin="ICSPDAT/RA0" pad="1"/>
<connect gate="G$1" pin="RA2" pad="4"/>
<connect gate="G$1" pin="RA3/!MCLR!/VPP" pad="6"/>
<connect gate="G$1" pin="VDD" pad="5"/>
<connect gate="G$1" pin="VSS" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
<deviceset name="PIC10F322" prefix="MCU" uservalue="yes">
<description>&lt;h3&gt;Microchip PIC10F322&lt;/h3&gt;
6-Pin Flash-Based, 8-Bit Microcontroller
&lt;br /&gt;&lt;br /&gt;
Location: MCU/MICROCHIP</description>
<gates>
<gate name="G$1" symbol="PIC10(L)F320/322" x="0" y="0"/>
</gates>
<devices>
<device name="SMD" package="SOT23-6">
<connects>
<connect gate="G$1" pin="ICSPCLK/RA1" pad="3"/>
<connect gate="G$1" pin="ICSPDAT/RA0" pad="1"/>
<connect gate="G$1" pin="RA2" pad="4"/>
<connect gate="G$1" pin="RA3/!MCLR!/VPP" pad="6"/>
<connect gate="G$1" pin="VDD" pad="5"/>
<connect gate="G$1" pin="VSS" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
<deviceset name="PIC10LF322" prefix="MCU" uservalue="yes">
<description>&lt;h3&gt;Microchip PIC10LF322 eXtreme Low-Power&lt;/h3&gt;
6-Pin Flash-Based, 8-Bit Microcontroller
&lt;br /&gt;&lt;br /&gt;
Location: MCU/MICROCHIP</description>
<gates>
<gate name="G$1" symbol="PIC10(L)F320/322" x="0" y="0"/>
</gates>
<devices>
<device name="SMD" package="SOT23-6">
<connects>
<connect gate="G$1" pin="ICSPCLK/RA1" pad="3"/>
<connect gate="G$1" pin="ICSPDAT/RA0" pad="1"/>
<connect gate="G$1" pin="RA2" pad="4"/>
<connect gate="G$1" pin="RA3/!MCLR!/VPP" pad="6"/>
<connect gate="G$1" pin="VDD" pad="5"/>
<connect gate="G$1" pin="VSS" pad="2"/>
</connects>
<technologies>
<technology name=""/>
</technologies>
</device>
</devices>
</deviceset>
</devicesets>
</library>
</drawing>
</eagle>