1. ALL DIMENSIONS ARE IN MILLIMETERS UNLESS OTHERWISE SHOWN ON THE DRAWINGS.

ALL MATERIALS TO BE USED IN THIS PROJECT SHALL BE APPROVED ABBREVIATION DESCRIPTION

PVC PIPE QUALITY, AND TO MATCH THE BASE BUILDING STANDARD
2. ANY AND ALL OTHER WORKS INVOLVED IN PROVIDING THE COMPLETE OPERATION OF THE COLD WATER SUPPLY SYSTEM, HOT PVC PIPE FOR ALL SOLID WASTELINE INDICATED IN THE PLAN, AS CB CATCH BASIN
WATER SYSTEM, SANITARY SEWER SYSTEM AND STORM DRAINAGE SHALL BE PROVIDED. WELL AS THE LIQUID WASTELINE. CO SANITARY CLEAN OUT
LAV LAVATORY
3. ALL PLUMBING WORKS SHALL BE CARRIED OUT IN ACCORDANCE WITH THE LATEST EDITION OF THE NATIONAL PLUMBING MAINTAIN A UNIFORM SLOPE OF 2% FOR ALL DRAIN PIPES HAVING A SHO SHOWER
DIAMETER OF 100 MM ( 4" ) OR SMALLER. USE 25 MM ( 1" ) DIAMETER
CODE OF THE PHILIPPINES AND LOCAL ORDINANCE OF THE CITY/MUNICIPALITY KS KITCHEN SINK
PIPE FOR MAIN NON POTABLE WATER SUPPLY LINE, WHILE FOR
WM WATER METER
THOSE PIPE SERVING POTABLE WATER USE 20 MM ( 1/2" ) DIAMETER
4. INSTALLATION OF ALL PLUMBING FIXTURES AND EQUIPMENT WITH STANDARD FITTINGS AND ACCESSORIES. OTHER FITTINGS PIPE CV CHECK VALVE
TRIMS AND ACCESSORIES TO MAKE THE INSTALLATION COMPLETE AND OPERATIONAL SHALL BE SUPPLIED AND INSTALLED BY GV GATE VALVE
THE NOMINATED CONTRACTOR GENERAL PLUMBING INSTALLATIONS SHALL BE UNDER THE DIRECT SS SOIL STACK
SUPERVISION OF A DULY LICENSED MASTER PLUMBER & SHALL VS VENT STACK
5. SUBMITTAL OF CERTIFICATE OF TEST ON ALL INSTALLED PIPING SYSTEM, PLUMBING FIXTURES AND EQUIPMENT. CONFORM TO A LOCAL ORDINANCE AND TO NATIONAL PLUMBING FD FLOOR DRAIN
CODE OF THE PHILIPPINES. CWL COLD WATER LINE
6. CHIPPING AND RESTORATION OF WALLS AND SLAB. DWV DRAIN, WASTE AND VENT

1 PLUMBING NOTES 2 MATERIAL SPECIFICATION 3 ABBREVIATION 4 LEGEND

PL-00 PL-00 PL-00 PL-00

OUTLET

INLET

5 RAIN WATER HARVESTING SCHEMATICS

PL-00

CATCH BASIN PLAN DETAIL

INLET OUTLET

THE SITE DIGESTIVE LEACHING LEACHING

CHAMBER WELL WELL

CATCH BASIN SECTION DETAIL

7 CATCH BASIN DETAIL

PL-00

8 SEPTIC TANK BLOW UP PLAN AND SECTION DETAIL

6 VICINITY MAP PL-00
PL-00

REPUBLIC ACT 9266 ARCHITECTURAL LAW 2004 OWNER PROJECT TITLE MASTER PLUMBER SHEET CONTENTS NO. DATE REVISIONS DRAWING No.
ARTICLE III SECTION 20 (5):
ALL ARCHITECTURAL DRAWINGS, PLANS, DESIGNS, SPECIFICATIONS
AR. CLIFFORD JAE NEBRES AND ARCHITECTURAL DOCUMENTS RELATIVE TO THE CONSTRUCTION
OF A BUILDING SHALL BEAR THE SEAL AND SIGNATURE ONLY OF AN
16 Sitio Gumamela 2, Phase 2 ARCHITECT REGISTERED AND LICENSED UNDER THE ACT. PLUMBING NOTES
Brgy. Sta. Cruz, Antipolo City
MATERIAL SPECIFICATION
PL-00
ARTICLE IV SECTION 33;
www.fordnebresarchitects.com DRAWINGS AND SPECIFICATIONS DULY SIGNED, STAMP OR SEALED CLIFFORD JAE O. NEBRES
AS INSTRUMENT OF SERVICES ARE INTELLECTUAL PROPERTIES AND
DOCUMENTS OF THE ARCHITECT. SPS. ALFONSO & VERONICA ALFONSO ALFONSO RESIDENCE MASTER PLUMBER ABBREVIATION
www.fordnebresarchitects.com
[email protected] REPUBLIC ACT 8293 SECTION 186:
PRC No: 0011534 DATE ISSUED: 01/05/2023
LEGEND
INTELLECTUAL PROPERTY LAW : COPYRIGHT IN THE ARCHITECTURAL WORKS
09266631818 OF AN ARCHITECT SHALL INCLUDE AND HAS RIGHT TO CONTROL ALL
CAINTA, RIZAL PTR No: 8677904 PLACED ISSUED: ANTIPOLO CITY
DRAWINGS.