Group B 1st & 2nd Sem (SESSION 2024 onwards)

B. Tech (Electrical Engineering)

SEMESTER –I

Sl. No. Course Course Title Hours Per Week Total

Code Lecture Tutorial Practical Credits
Engineering Physics
1. 100110 3 0 0 3
2. 100102 Engineering Mathematics-I 3 1 0 4
3. 100111 Programming for Problem Solving 3 0 0 3
4. 100106 Basic Electrical Engineering 3 0 0 3
5. 100112 Workshop Practices 2 0 0 2
6. 100115P Swachha Bharat Mission 0 0 2 1
7. 100110P Engineering Physics Lab 0 0 2 1
8. 100111P Programming for Problem Solving Lab 0 0 2 1
2 1
9. 100106P Basic Electrical Engineering Lab 0 0
2 1
10. 100112P Workshop Practices Lab 0 0
TOTAL 20

SEMESTER –II

Sl. No. Course Course Title Hours Per Week Total

Code Lecture Tutorial Practical Credits
Engineering Chemistry
1. 100215 3 0 0 3
2. 100202 Engineering Mathematics-II 3 1 0 4

3. 100216 Communicative English 3 0 0 3

4. 100220P Sports/Yoga/NCC/NSS 0 0 2 1

5. 100209 Basic Electronics 3 0 0 3

6. 100217 Engineering Graphics & Design 1 0 0 1
7. 100215P Engineering Chemistry Lab 0 0 2 1
8. 100216P Communicative English Lab 0 0 2 1
Basic Electronics Lab
9. 100209P 0 0 2 1

10. 100217P Engineering Graphics & Design Lab 0 0 4 2

TOTAL 20
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100110 Engineering Physics 3003

Unit- 1.0
1. Frame of Reference: 2 hrs
Non-Inertial frame of reference, rotating coordinate system, centripetal and Coriolis acceleration
and its application in weather system.
2. Oscillations: 3 hrs
Harmonic Oscillator, Damped Harmonic motion – overdamped, critically Damped and lightly
damped oscillators, Force Oscillators and Resonance.
Unit- 2.0
1. Optics: 4 hrs
Huygens’s Principle, Superposition of Waves and interference of Light by wave front-splitting
and amplitude-splitting; Young’s double slit experiment, Michelson interferometer, Fraunhofer
diffraction from single slit and circular aperture, Diffraction Grating and their resolving power
2. LASER: 4 hrs
Einstein’s theory of matter-radiations interaction, Einstein’s Coefficients (A and B),
Amplification by population inversion, Different types of lasers – Gas Laser, Helium-Neon
Laser, Solid State Laser (Ruby, Neodymium), Semiconductor Laser.
Unit- 3.0
1. Quantum Mechanics: 5 hrs
Compton Effect, Photoelectric Effect, Wave Particle duality, de Broglie’s hypothesis,
Heisenberg’s Uncertainty Principle, Wave function and wave packets, phase and group
velocities, Schrodinger’s Wave Equation, Normalization, Expectation values, Eigenvalues and
Eigenfunction.
2. Applications in One dimensions: 2 hrs
Application of Schrodinger Wave Equation for particle in one dimensional box – its
wavefunction and eigenvalue of energy and momentum.
Unit- 4.0
1. Vector Calculus: 2 hrs
Gradient, Divergence and Curl, Line, Surface and Volume integrals, Gauss’s Divergence
theorem and Stokes’ theorem in Cartesian Coordinate.
2. Electrostatics: 4 hrs
Gauss’s Law and its applications, Divergence and Curl of Electrostatic fields, Electrostatic
Potential, Boundary Conditions, Poisson’s and Laplace’s equations, Dielectrics, Polarization,
Bound Charges, Electric displacement, Boundary Conditions in dielectrics.
Unit- 5.0
1. Magnetostatics: 4 hrs
Lorentz force, Biot-Savart and Ampere’s circuital laws and their applications, Divergence and
Curl of Magneto static fields, Magnetic vector potential, Force and torque on a magnetic dipole,
Magnetic Materials, Magnetization, Bound currents, Boundary conditions.
2. Electrodynamics and Electromagnetic Waves: 4 hrs
Ohm’s law, Motional EMF, Faraday’s Law, Lenz’s law, Self and mutual inductance, Energy
stored in magnetic field, Maxwell’s equations in vacuum and nonconducting medium, Continuity
Equation, Poynting Theorem, Wave Equations: plain electromagnetic wave in vacuum and their
transverse nature and Polarization.
Unit- 6.0
1. Introduction to Solids and Semi-Conductors: 3 hrs
Free electron theory of metal, fermi level, Bloch’s theorem for particle in a periodic Potential,
Kroning-Penney model and origin of energy band.
2. Electronic Materials: 3 hrs
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Metals, semiconductors and insulators, intrinsic and extrinsic semiconductors,Carriertransport,

diffusion and drift, P-N junction.
Text/ Reference:-
1. Quantum Physics of Atoms, Molecules, Solids, Nuclei and Particles, R. Eisberg R.
Resnick, Wiley India Pvt. Ltd ISBN 978-81-265-0818-1
2. Theory of Vibration with Application, W.T. Thomson M. D. Dahleh, Pearson India ISBN
978-81-317-0482-0
3. Introduction to Electrodynamics, D.J. Griffiths, Pearson India, ISBN 978-93-325-5044-5
4. Electromagnetism, I.S. Grant, W. R. Phillips, Wiley India Pvt. Ltd ISBN 978-04-719-
2712-9
5. The Feynman Lectures on Physics, R.P. Feynman R. B. Leighton, Pearson India ISBN
978-00-710-7458-2
6. Optics, Ajay Ghatak ,McGraw Hill ISBN 978-93-901-1359-0
7. Physics of Vibration and Waves, H. J. Pain, Wiley India Pvt. Ltd, ISBN 978-04-700-
1296-3
8. Concept of Modern Physics, Arthur Beiser, McGraw Hill ISBN 978-93-513-4185-7
9. Introduction to Solid State Physics, C. Kittle , Wiley India Pvt. Ltd, ISBN 978-81-265-
7843-6
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100102 Engineering Mathematics–I 3104

Unit- 1.0: Linear Algebra-I 7 hrs
Elementary Row operations, Gauss -Jordan Method for finding the inverse of Matrix, Complex
Matrix : Hermitian , Skew Hermitian and Unitary Matrix, Vector space, Sub Spaces, Linear
dependence and Independences of Vectors, Linear Span, Basis, Dimension, Extension of basis of
subspace, The rank of a matrix, Row and column space, Solvability of system of linear
equations.
Unit- 2.0: Linear Algebra-II 7 hrs
Linear Transformations, Kernel and Range of linear transformation, Matrix Representation of a
linear transformation, Rank-Nullity Theorem, Eigen Value and Eigen Vectors, Properties of
Eigen vectors, Eigen Bases, Orthogonal Transformation, Similarity Transformation, Matrix
Diagonalization, Cayley- Hamilton Theorem.
Unit- 3.0: Calculus for single variable 7 hrs
Inderminate form, L’Hospital Rule, Rolle’s Theorem, Mean Value Theorem, Expansion of
function (single variable), Taylor and Maclaurin Series, Riemann Integration, Riemann Sum,
Improper Integrals, Beta and Gamma function and their properties.
Unit- 4.0 : Multivariable Calculus (Differentiation) 7 hrs
Function with two or more variable, Limit, continuity and Partial differentiation, Total
Differentiation
Taylor’s series and Maclaurin’s series for function with two variable, Jacobian, Maxima and
Minima, Method of Lagrange’s multiplier.
Unit-5.0: Multivariable Calculus (Integration) 7 hrs
Double Integral, change of order of integration, Triple integral, Change of Variable in a Double
and Triple Integrals, Change to polar coordinate, Change to cylindrical coordinate, Change to
spherical polar coordinate, Application to area and volume using double and triple integral
Unit- 6.0: Vector Calculus 7 hrs
Scalar and vector fields, Gradient, Directional derivative, Divergence, Curl and their properties,
Line integral, Green’s theorem in plane (without proof), Surface integral, Stoke’s theorem
(without proof), Volume Integral, Gauss-Divergence’ theorem (without proof).

Text/ Reference:-
1. AICTE’s Prescribed Textbook: Mathematics-I (Calculus & Linear Algebra), ReenaGarg,
Khanna Book Publishing Co. ISBN-10 9391505171
2. Advanced Engineering Mathematics, Chandrika Prasad &ReenaGarg, Khanna Book
Publishing Co., 2021. ISBN 10: 9386173522 / ISBN 13: 9789386173522.
3. Higher Engineering Mathematics, B.V. Ramana, Tata McGraw Hill New Delhi, 11th
Reprint, 2010,ISBN-10 007063419X ISBN-13978- 0070634190.
4. Advanced Engineering Mathematics, SrkIyengarRk Jain,Narosa,5thEdition,ISBN-10
8184875606I
SBN-13978-8184875607
5. Advanced Engineering Mathematics, Erwin Kreyszig, 9th Edition, John Wiley & Sons,
2006.
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100111 Programming for Problem Solving 3003

Unit- 1.0
Introduction to Programming 6 hrs
Introduction to components of a computer system (disks, memory, processor, where a program
is stored and executed, operating system, compilers etc.). Idea of Algorithm: steps to solve
logical and numerical problems. Representation of Algorithm: Flowchart/ Pseudo code with
examples. From algorithms to programs; source code, variables (with data types) variables and
memory locations, Syntax and Logical Errors in compilation, object and executable code.
Unit- 2.0
Operators, Conditional Branching and Loops 8 hrs
Arithmetic expressions/arithmetic operators, relational operators, logical operators, bitwise
operators and [Link] and evaluation of conditionals and consequent branching,
Iteration and loops.
Unit- 3.0
Arrays and String 6 hrs
Array declaration & initialization, bound checking arrays (1-d, 2-d), character arrays and strings.
Unit- 4.0
Function, Recursion and Pointers 9 hrs
Functions (including using built in libraries), Parameter passing in functions, call by value,
passing arrays to functions: Recursion, as a different way of solving problems. Example
programs, such as Finding Factorial, Fibonacci series, Ackerman function etc. Idea of pointers,
Defining pointers, Use of Pointers in self- referential structures, idea of call by reference.
Unit- 5.0
User defined Data Types and File handling 8 hrs
Structure- defining, declaring, initializing; accessing structure members, processing of structure,
array of structures, structures within structure, structure and function, type definition; Union—
definition, declaration, accessing union members, initializing union. Introduction, file
declaration, opening and closing a file, working with text and binary files, I/O operations on file,
error handling, random access to files
Unit- 6.0
Basic Algorithms 5 hrs
Searching, Basic Sorting Algorithms (Bubble, Insertion and Selection), Finding roots of
equations, notion of order of complexity through example programs (no formal definition
required)
Text/ Reference:-
1. Programming in ANSI C 4th Ed,EBalagurusamy, McGraw Hill Education India
Private Limited, ISBN-978-9339219666, 7th Edition
2. The C Programming Language 2e,W. Kernighan / Dennis Ritchie,Pearson Education
India, 978-9332549449, 2nd Edition
3. Computer Fundamentals and Programming in C,ReemaThareja,Oxford University Press,
ISBN- 978-9354977893, 3rd Edition
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100106 Basic Electrical Engineering 3003

Unit- 1.0 8 hrs
DC Circuit Analysis and Network Theorems: Concepts of Network, Active and Passive
elements, voltage and current sources, concept of linearity and linear network, unilateral and
bilateral elements. R L and C as linear [Link] Transformation. Kirchhoff’s Law, loop
and nodal methods of analysis; star – delta transformation; Network Theorems: Superposition
Theorem, Thevenin’s Theorem, Norton’s Theorem, Maximum Power Transfer Theorem.
(Simple Numerical Problems)
Unit- 2.0 5 hrs
Magnetic Circuit: Magnetic circuit concepts, analogy between Electric & Magnetic circuits,
Magnetic circuits with DC and AC excitation, Magnetic leakage. B-H curve, Hysteresis and
Eddy Current losses, Magnetic circuit calculations.
Unit- 3.0 8 hrs
Steady State Analysis of Single-Phase AC Circuits: Sinusoidal, Square and Triangular
waveforms–average and effective values, form and peak factors, concept of phasors, phasor
representation of sinusoidally varying voltage and current. Analysis of series, parallel, and series
– parallel RLC Circuits: Apparent, Active & Reactive Powers, Power factor, causes and
problems of low power factor, power factor improvement. Resonance in Series and Parallel
Circuits. (Simple Numerical Problems)
Unit- 4.0 5 hrs
Three Phase AC Circuits: Three Phase System – its necessity and advantages, meaning of phase
sequence and star and delta connections, balanced supply and balanced load, line and phase
voltage/ current relations, three phase power and its measurement. (Simple Numerical Problems)
Unit- 5.0 10 hrs
Introduction to DC Machines:Principal, Operation, Construction, and types of DC machines,
e.m.f. equation of generator and torque equation of motor.
Single Phase Transformer: Principle of Operation, Construction, e.m.f. equation, losses in
transformer, efficiency.
Three Phase Induction Motor:Principal, Operation, and Construction (Simple Numerical
Problems)
Unit- 6.0 6 hrs
Soldering- Soldering and desoldering techniques, breadboard wiring, general-purpose PCB
soldering/wiring.
Wiring-Types of residential and commercial wiring systems, general rules and guidelines for
installation, loadcalculation and sizing of wire, rating of main switch, distribution board.
Text/ Reference:-
1. Basic Electrical Engineering, D.P. Kothari et al,McGraw-Hill Education 4th Edition,2019
2. Electrical and Electronic Technology Edward Hughes, 12th edition, 2016
3. Principles Electrical Engineering and Electronics, V.K Mehata, Rohit Mehta, S Chand
and Company 2nd edition, 2015
4. Basic Electrical Engineering, J. B. Gupta, Katson Publication
5. A textbook of Electrical Technology B. L. Thereja, A. K. Thereja Vol. 1, 2, and 3 S
Chand Publication
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100112 Workshop Practices 2002

Unit-1
Sheet Metal Working: 6 hrs
Sheet material: GI sheets, aluminium, tin plate, copper, brass etc; Tools: steel rule, verniercallipers,
micrometer, sheet metal gauge, scriber, divider, punches, chisels, hammers, snips, pliers, stakes etc.;
operations: scribing, bending, shearing, punching etc; Product development: hexagonal box with cap,
funnel etc.
Unit-2
Joining: 6 hrs
Classifications of joining processes; Brazing, Soldering, and Mechanical Joints, Arc welding, Gas
welding etc.
Unit-3
Pattern Making and Foundry Practice: 6 hrs
Pattern material: wood, cast iron, brass, aluminium, waxes etc.; Types of patterns: split, single piece,
match plate etc; Tools: cope, drag, core, core prints, shovel, riddle, rammer, trowel, slick, lifter, sprue pin,
bellow, mallet, vent rod, furnace etc. Moulding sands: green sand, dry sand, loam sand, facing sand etc.,
Sand casting: Sand preparation, mould making, melting, pouring, and cleaning
Unit-4
Fitting Shop 10 hrs
Introduction to Fitting; Fitting Tools: Files and their classification, Holding Tools, Cutting Tools,
Measuring and Marking Tools, Thread Making Tools, Various Fitting Power Tools; Methods Of Filing:
Cross Filling and Draw Filing, Other associated operations Marking. Sawing and Chipping; Safety and
Precautions in Fitting Shop.
Unit-5
Carpentry Shop 7 hrs
Introduction to Carpentry Shop; Types of Wood; Seasoning of Wood: Ty[es of Seasoning Methods;
Defects in wood; Structure of Wood; Car[entry Tools; Measuring Tools, Marking Tools, Cutting Tools,
Planning Tools, Drilling and Boring Tools, Holding Tools, Striking Tools, Auxiliary tools and materials
used in Carpentry; Wood working Processes; Carpentry joints; wood Working Machines: Wood Working
Lathe, Circular Saw, Thickness Planer, Band sawSafety and precautions in Carpentry Shop.
Unit-6
Smithy Shop 5 hrs
Introduction to Smithy Sho; Forging Tools and Equipment; Forging Operations: Drawing, Upsetting,
Swaging, Punching, Drifting, Fullering, Bending; Hot Working Processes: Rolling, Drop Forging, Press
Forging, Hot Extrusion, Hot Drawing, Cold Working Process, Safety and Precautions in Smithy Shop.
Text/ Reference:-
1. HajraChoudhury S.K., HajraChoudhury A.K. And Nirjhar Roy S.K., “ElementsOf Workshop
Technology”, Vol. I 2008 And Vol. Ii 2010, Media PromotersAnd Publishers Private Limited,
Mumbai.
2. Kalpakjian S. And Steven S. Schmid, “Manufacturing Engineering AndTechnology”, 4th Edition,
Pearson Education India Edition, 2002.
3. Gowri P. HariharanAnd A. Suresh Babu,”Manufacturing Technology – I”Pearson Education,
2008.
4. Roy A. Lindberg, “Processes And Materials Of Manufacture”, 4th Edition,Prentice Hall India,
1998.
5. Rao P.N., “Manufacturing Technology”, Vol. I And Vol. Ii, Tata McgrawhillHouse, 2017.
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100115P Swatch Bharat Mission 0021

Objectives:
1. Understanding the importance of cleanliness and sanitation: The course could aim to create
awareness about the significance of cleanliness and sanitation in maintaining personal health,
environmental sustainability, and community well-being. It could cover topics such as waste
management, sanitation practices, and the impact of poor sanitation on public health.
2. Developing skills for effective waste management: The course could provide training on
various waste management techniques, such as waste segregation, composting, recycling,
and proper disposal of hazardous waste. It could also emphasize the importance of reducing
waste generation and promoting sustainable waste management practices.
3. Promoting behavioural change towards cleanliness: The course could focus on influencing
positivebehavioural change among individuals and communities towards cleanliness. It could
include modules on promoting good hygiene practices, creating awareness about the harmful
effects of littering and open defecation, and encouraging responsible waste disposal habits.
4. Creating awareness about Swachh Bharat Mission initiatives: The course could provide
information about the Swachh Bharat Mission initiatives and campaigns launched by the
Government of India to promote cleanliness and sanitation, such as SwachhSurvekshan,
Swachh Bharat Abhiyan, and Clean India Campaign. It could also discuss the progress made,
challenges faced, and future prospects of the Swachh Bharat Mission.
5. Engaging in community participation and advocacy: The course could emphasize the
importance of community participation in the Swachh Bharat Mission and provide tools and
strategies for engaging with local communities to promote cleanliness and sanitation. It could
also encourage advocacy for policy changes and innovations to address sanitation-related
issues at the community, regional, and national levels.
6. Pre-requisite: Nil
7. Course Outcome:
8. Increased awareness and knowledge about cleanliness and sanitation: Participants of the
course may gain a deeper understanding of the importance of cleanliness and sanitation,
including the impact on personal health, environmental sustainability, and community well-
being. They may learn about various waste management techniques, hygiene practices, and
the initiatives of the Swachh Bharat Mission.
9. Enhanced skills for effective waste management: Participants may acquire practical skills
related to waste management, such as waste segregation, composting, recycling, and proper
disposal of hazardous waste. They may also develop skills in reducing waste generation and
promoting sustainable waste management practices in their communities or workplaces.
10. Positive behavioral change towards cleanliness: The course may influence participants to
adopt positive behavioral changes towards cleanliness, such as avoiding littering, practicing
good hygiene habits, and promoting responsible waste disposal. Participants may develop a
sense of responsibility towards maintaining cleanliness in their surroundings and actively
contribute towards creating a cleaner environment.
11. Increased community participation and advocacy: Participants may become actively
engaged in community participation and advocacy efforts related to cleanliness and
sanitation. They may collaborate with local communities, government bodies, and non-
governmental organizations (NGOs) to raise awareness, implement cleanliness initiatives, and
advocate for policy changes or innovations to address sanitation-related issues.
12. Contribution towards Swachh Bharat Mission objectives: Participants may contribute
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

towards the objectives of the Swachh Bharat Mission, such as promoting cleanliness, ensuring
proper waste management, and eliminating open defecation. They may actively participate in
Swachh Bharat Mission campaigns, initiatives, and activities, and make a positive impact on
their communities and society at large.
13. List of Reports:
14. Any topics related to Swatch Bharat Mission
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100110P Engineering Physics Lab 0021

Perform any 10 Experiments
1. Determination of the capacitance and permittivity of the given material.
2. Determination of e/m of electron.
3. Determination of Planck’s constant and Photoelectric Work Function using Photoelectric cell.
4. Verification of inverse square law using photocell.
5. Determination of Wavelength of (He-Ne) LASER using Diffraction Grating Method.
6. Calculation of Energy Band Gap of a semiconductor.
7. Determination of Dielectric constant using resonance method.
8. Determination of Wavelength of Sodium light by measuring the diameter of the Newton’s
Ring.
9. Determination of curvature of convex surface of a lens by Newton’s ring.
10. Verification of existence of Bohr’s Energy level with Frank-Hertz apparatus.
11. Determination of the Earth’s horizontal magnetic field intensity and magnetic Moment of a
magnet by employing magnetometer.
12. Verification of Faraday’s Law and Lenz’s Law of Electromagnetic Induction.
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100111P Programming for Problem Solving Lab 0021

Perform any 10 Experiments
1. Tutorial 1: Problem solving using computers:
Lab1: Familiarization with programming environment
2. Tutorial 2: Variable types and type conversions:
Lab 2: Simple computational problems using arithmetic expressions
3. Tutorial 3: Branching and logical expressions:
Lab 3: Problems involving if-then-else structures
4. Tutorial 4: Loops, while and for loops:
Lab 4: Iterative problems e.g., sum of series
5. Tutorial 5: 1D Arrays: searching, sorting:
Lab 5: 1D Array manipulation
6. Tutorial 6: 2D arrays and Strings
Lab 6: Matrix problems, String operations
7. Tutorial 7: Functions, call by value:
Lab 7: Simple functions
8. Tutorial 8 &9: Numerical methods (Root finding, numerical differentiation, numerical
integration):
Lab 8 and 9: Programming for solving Numerical methods problems
9. Tutorial 10: Recursion, structure of recursive calls
Lab 10: Recursive functions
10. Tutorial 11: Pointers, structures and dynamic memory allocation
Lab 11: Pointers and structures
11. Tutorial 12: File handling:
Lab 12: File operations
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100106P Basic Electrical Engineering Lab 0021

Perform any 10 Experiments

1. Verification of Kirchhoff’s laws.

2. Verification of Superposition Theorem.
3. Verification of Thevenin’s Theorem.
4. Verification of Norton’s Theorem.
5. Verification of Maximum Power Transfer Theorem.
6. Measurement of power in 3 – Ø circuit by Two Watt meter method and determination of its
power factor.
7. Star to Delta and Delta to Star conversion of the three circuit.
8. Determination of Efficiency by load test of a 1 – Ø Transformer.
9. To study the typical BHK house wiring
10. Study of safety precautions while working on electrical installations and necessity of earthing
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100112P Workshop Practices Lab 0021

Perform all Experiments
List of Practical:
1. Learn and apply of different fitting tools –like work holding, marking, measuring, cutting,
finishing and miscellaneous. Student will also prepare the report with sketch, specifications and
applications of fitting tools demonstrated.
2. Prepare one simple and another male-female type fitting jobs as per given drawings- 2 jobs
3. Learn and apply of different tin smithy tools. Student will also prepare the report with sketch,
specifications and applications of tin smithy tools demonstrated.
4. Learn and apply of welding equipments and making minimum one model.
5. Learn and apply of foundry tools and making minimum one model.
6. Learn and apply of carpentry tools and making minimum one model.
7. Learn and apply of Sheet Metal tools and making minimum one model.
8. Learn and apply of Lathe Tools & operations for making a job.
9. Learn and apply the application of measuring tools.
10. Learn and apply any casting process for making a model
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100215 Engineering Chemistry 3003

Unit 1.0- Atomic and Molecular Structure 8 hrs

Electromagnetic radiations, Dual nature of electron and Heisenberg uncertainty
[Link] effect, Planck's [Link] for the combination of atomic orbitals to
form a molecular diagram of molecular [Link]'s rule, VSEPR theory (typical example) co-
ordination numbers and geometries. Isomerism in transition metal compounds. Metal Carbonyls;
Synthesis and Structure.
Unit 2.0- Spectroscopy 6 hrs
Principle of rotational and vibrational spectroscopy, selection rule for application in diatomic
molecules, elementary idea of electronic spectroscopy, UV-VIS spectroscopy with related to
rules and its applications. Basic Principle of nuclear Magnetic resonance spectroscopy with
applications.
Unit 3.0 -Electrochemistry and Fuels 6 hrs
Nernst equation, EMF and electrochemical cell, the introduction of corrosion, corrosion
mechanism, types of corrosion, water line corrosion, stress corrosion, pitting corrosion, Lead
acid storage cell, leclanche cell. Calorific value of fuels, proximate and ultimate analysis of
coals, fuel cells, Bio fuels.
Unit 4.0- Water Chemistry 8 hrs
Hardness of water, estimation of water hardness by EDTA and Alkalinity [Link] of
the hardness of water- soda lime process, zeolite process, Ion exchange process, Boiler problem,
sludge, and scale formation, priming and foaming, Boiler corrosion, and Caustic embrittlement.
Unit 5.0 - Polymer and Plastics 8 hrs
Polymerization techniques (free radical, ionic, and co-ordination mechanism)Preparation
properties, and technical application of phenol-formaldehyde resins, elastomers, synthetic
rubbers (Buna-S, Buna-N, neoprene). Inorganic polymers, Silicones, adhesives, epoxy resins. the
structural difference between thermoplastic and thermosetting Plastics, the Importance of
commercially important thermoplastics and thermosets; Poly ethylene, Polyvinyl chloride,
Polystyrene.
Unit 6.0- Organic Reactions and Synthesis of A Drug Molecul 6 hrs
Introduction to intermediate and reaction involving Substitution, addition, elimination, oxidation-
reduction. Diels Elder cyclization and epoxide ring opening reactions, synthesis of commonly
used drug molecules like aspirin.

Text/ Reference:-
1. University Chemistry, B.H. Mahan,Pearson
2. Chemistry, principles and application, M.J. Sienko and R.A. Plane, McGraw Hill
International
3. Fundamentals of molecular Spectroscopy, C.N. Banwell , McGraw Hill International
4. Engineering Chemistry (NPTEL Web- Book), B.L. Tembe, Kamaluddin and M.S.
Krishnan, NPTEL
5. Physical Chemistry, P.W. Atkins, Oxford University Press
6. A text book of engineering chemistry, S. Chawala, DhanpatRai Publication
7. General Chemistry Part 1, R. Sarkar, New Central Book agency
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100202 Engineering Mathematics– II 3104

Unit- 1.0 Complex Analysis – I 6 hrs
Functions of complex variable, limit, Continuity, Differentiability, Analytic function, Cauchy-
Riemann Equations in Cartesian and polar form, harmonic function and harmonic conjugate.
Unit- 2.0 Complex Analysis – II 8 hrs
Line Integral, contour integrals, Cauchy theorem, Cauchy’s Integral formula(without proof),
Taylors series, zero of analytic functions, singularities, Laurent’s series, residue, Cauchy residue
theorem(without Proof) and its applications.
Unit- 3.0 Ordinary Differential Equations 8 hrs
Linear differential equations of nth Order with constant coefficients, solution of Homogeneous
and Non-Homogeneous Equations, Equations with variable coefficients, Cauchy- Euler
Equations, Method of Variation of Parameters.
Unit- 4.0 Sequence and Series 6 hrs
Introduction of Sequence and Series, Nature of series Tests of convergence of Series:
Comparison test, D’Alembert ratio test, Cauchy’s Root test, Raabe’s test, Logarithmic test,
Cauchy’s condensation test.
Unit- 5.0 Laplace Transform 8 hrs
Laplace Transform, Existence theorem, properties of Laplace Transform, Laplace Transform of
Periodic functions, Inverse Laplace Transform, convolution theorem. Application of Laplace
Transform to solve Ordinary differential equations.
Unit- 6.0 Fourier Series 6 hrs
Fourier Series, Fourier Series for odd and even functions, Half range sine and cosine series,
Parseval’s theorem.
Text/ Reference:-
1. Advanced Engineering Mathematics, Kreyszig Erwin, John Wiley and Sons,10th
Edition,2020 ISBN:978-0470-45836-5
2. Advanced Engineering Mathematics, Dass H.K., S Chand and Company [Link].,22nd
Edition,2018 ISBN:978-93-5283-718-2
3. Higher Engineering Mathematics, Grewal B.S., Khanna Publishers,44th Edition,2023
ISBN:9788174091154
4. Complex Variables (Theory and Applications), Kasana H.S., PHI,2nd Edition.2015
ISBN:978-81-203-2641-5
5. A Text Book of Engineering Mathematics, Bali N.P., Goyal Manish Laxmi
Publications,9th Edition,2014
6. Higher Engineering Mathematics, Ramana B.V., Tata McGraw Hill New Delhi, 11th
Reprint, 2010, ISBN-10 007063419X ISBN-13 978- 0070634190
7. Differential Equations, Ross S.L.,Wiley Publications,3rd edition,2016 ISBN:978-81-
265—1537-0
8. Advanced Differential Equations, Raisinghania M.D., [Link] and Company
[Link].,18th Edition,2015 ISBN:978-81-219-0893-1
9. Schaum’s Outlines Complex Variables, Spiegel Murray R, Lipschutz Seymour, Schiller J
John and Spellman Dennis, MC Graw Hill Education Private Ltd.2nd Edition,2010
ISBN:978-0-07-008538-1
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100216 Communicative English 3003

Unit-1.0: Vocabulary Building 7 hrs

Nature of Word Formation; Root Word and Morpheme; Prefix and Suffix; Foreign Expressions
in English; Synonym and Antonym; Homophone and Homograph; Abbreviation and Acronym.
Unit-2.0: Basic Writing Skills 7 hrs
Parts of Speech: Types of Words; Structures of Sentence; Kind of Sentence; Phrase and Clause;
Punctuation Marks; Capitalization; Tenses: Present, Past and Future; Voices: Active and Passive;
Formation of Questions using Primary Auxiliaries, Modals and Wh-Words.
Unit-3.0: Common Errors in English 7 hrs
Articles; Prepositions; Modifiers; Subject-Verb Agreement; Noun-Pronoun agreement;
Redundancies; Cliches; Spelling Error.
Unit-4.0: Principles of Appropriate Writi 7 hrs
Defining: Describing, Classifying and Exemplifying; Introduction, Body, and Conclusion;
References, Quotations and Illustrations; Organizing the Paragraphs in a Document; 7Cs of the
Professional Writing: Clear, Concise, Concrete, Correct, Coherent, Complete and Courteous.
Unit-5.0: Practices of Formal Writing 7 hrs
Formal Letter: Cover-Letter and Application; Resume Writing; Report Writing; Minutes of
Meeting; Memorandum; Notice; Essay Writing: Personal and Impersonal; Email Writing
Etiquettes; Article Writing; Writing for Current Social Media.
Unit-6.0: Comprehension of Written English 7 hrs
Of Studies (Essay) by Sir Francis Bacon; The Sun Rising (Poem) by John Donne; The Last Leaf
(Story) by O Henry; Unseen/Untaught Passage.

Text/ Reference:-
1. English language and communication skills for engineers, Sanjay Kumar,Pushplata,
Oxford university Press
2. Communicative English for Technical student, Dr. BijayBhadur Singh and Dr.
KalpanaSinha, Foundation publishing House (FPM)
3. Communication Skill (As per VRV syllabus 2018),Sanjay Kumar and Pushplata, Oxford
University Press
4. A course in Listening & Speaking, V. Sasi Kumar ,P. KiranmaiDutt and
GeethaRajeevan, Foundation Books
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100220P Sports/Yoga/NCC/NSS 0021

Course Objectives:
(a) Encouraging creativity and innovation: The course could aim to foster a culture of creativity
and innovation among engineering students. It could provide opportunities for students to
generate and develop new ideas, think critically, and come up with innovative solutions to real-
worldproblems. This objective could be achieved through brainstorming sessions, design
thinking exercises, and hands-on projects.
(b) Enhancing problem-solving skills: The course could focus on enhancing the problem-solving
skills of engineering students. It could provide training on various problem-solving techniques,
such as root cause analysis, critical thinking, and decision-making. Students may learn how to
identify and analyse complex problems, develop feasible solutions, and implement them
effectively.
(c) Developing project management skills: The course could aim to develop project management
skills among engineering students. It could cover topics such as project planning, scheduling,
budgeting, and risk management. Students may learn how to manage resources, communicate
effectively, and work collaboratively in a project-based environment.
(d) Promoting interdisciplinary collaboration: The course could encourage interdisciplinary
collaboration among engineering students. It could provide opportunities for students from
different engineering disciplines to work together on innovative projects. This could foster cross-
disciplinary learning, encourage diverse perspectives, and promote teamwork and collaboration
skills.
(e) Facilitating practical application of engineering concepts: The course could focus on the
practical application of engineering concepts and principles. It could provide students with
opportunities to apply their theoretical knowledge to real-world projects, prototypes, or
simulations. Students may learn how to translate engineering theories into practical solutions and
develop hands-on experience in implementing innovative projects.
Pre-requisite: Nil
Course Outcome:
1. Developed innovative projects: Students may have successfully developed innovative projects
that demonstrate their creativity, problem-solving skills, and technical competence. These
projects could be prototypes, models, simulations, or practical solutions to real-world problems,
showcasing their ability to apply engineering concepts in a creative and innovative manner.
2. Improved critical thinking and problem-solving skills: Students may have honed their critical
thinking and problem-solving skills through various course activities, such as brainstorming,
design thinking, and project development. They may have learned to analyse complex problems,
identify viable solutions, and make informed decisions based on technical, economic, and social
considerations.
3. Enhanced project management and teamwork skills: Students may have gained practical
experience in managing projects, including planning, scheduling, budgeting, and risk
management. They may have learned how to work effectively in a team, collaborate with diverse
team members, and communicate project progress and results professionally.
4. Increased interdisciplinary knowledge and collaboration: Students may have gained exposure
to interdisciplinary concepts and collaborated with peers from different engineering disciplines.
They may have learned to appreciate diverse perspectives, leverage interdisciplinary knowledge,
and work collaboratively to develop innovative solutions that integrate multiple domains of
engineering.
5. Cultivated a mindset of innovation and entrepreneurship: Students may have developed a
mindset of innovation and entrepreneurship, recognizing the importance of creativity,
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

adaptability, and continuous improvement in engineering practice. They may have learned to
identify opportunities, think critically, and take risks to develop and implement innovative
projects with commercial or societal potential.
List of Reports:
Any topics related to innovative project.
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100209 Basic Electronics 3003

Unit- 1.0
Semiconductor diode 9 hrs
Intrinsic and extrinsic types, energy band in intrinsic and extrinsic Semiconductor, equilibrium carrier
concentration Direct and indirect band-gap semiconductor. Ideal diode Construction, p-n junction under
open circuit, drift, and diffusion current, built in potential, forward bias, and reverse bias condition. Effect
of temperature, static and dynamic resistance, breakdown mechanism in diode, Junction
[Link] diode Working, VI characteristics Light emitting Diode, Photodiode, Solar cell.
Unit- 2.0
Diode Applications 7 hrs
Half wave rectifiers, Full wave rectifiers & Rectifier with filters, Zener diode application as voltage
regulator, Clipping and Clamping circuits, Voltage doubler (includes numerical on rectifier, filter, and
Zener regulator)
Unit- 3.0
Bipolar Junction Transistor 8 hrs
BJT introduction: Construction, Symbol, and types (PNP and NPN), working of BJT, BJT configuration
and characteristics, Load line analysis, Operating point, Need for Biasing, different Biasing circuits, Bias
stability. BJT as a switch &Amplifier, low frequency small signal model of BJT, CE amplifier with and
without feedback
Unit- 4.0
Field Effect Transistor 6hrs
General characteristics of FET; Comparison between FET & BJT; JFET: Construction, Principle of
Operation, Shockley equation. Outputand transfer characteristics; Depletion & Enhancement Type
MOSFET: Construction, Principle of operation. Output and transfer characteristics;
Unit- 5.0
Operational Amplifier 6 hrs
Block diagram of an Operational amplifier, schematic symbol, characteristics of an ideal and practical
operational amplifier, concept of virtual ground, Inverting and non-inverting amplifier, voltage follower,
adder, subtractor, integrator and differentiator.
Unit- 6.0
Fundamental of Digital Electronics 6 hrs
Introduction to number system: octal, Hexadecimal, Binary numbers, Binary addition using 1’s and 2’s
complement method. logic gates, Universal gates, Boolean Algebra, De Morgan’s theorems,
Simplification, and realization of Boolean expression using basic gates and NAND gates.
Text/ Reference:-
1. Electronic Device & Circuit theory Boylestad and Nashelsky Pearson
2. Electronic Principles Albert Malvino& Davis J. Bates TMH
3. Digital logic and computer design M. Morris Mano PHI
4. Electronic Devices and Circuit David A Bell Oxford
5. Microelectronic Circuit: Theory and Application Sedra and Smith Oxford
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100217 Engineering Graphics and Design 1001

Unit- 1.0: Introduction to Engineering Drawing 7hrs
Principles of Engineering Graphics and Their Significance, Usage of Drawing Instruments,
Lettering, Conic Sections including the Rectangular Hyperbola (General Method Only); Cycloid,
Epicycloid, Hypocycloid and Involute; Scales Plain, Diagonal and Vernier Scales
Unit- 2.0 Orthographic Projections 7hrs
Principles of Orthographic Projections - Conventions -Projections of Points and Lines Inclined to
Both Planes; Projections of Planes Inclined Planes Auxiliary Planes.
Unit- 3.0 Projections of Regular Solids 7hrs
Types of Solids, Projects of Solids (Prism, pyramids, cone, and cylinder): Inclined to Both the
Planes- Auxiliary Views; Draw Simple Annotation, Dimensioning and Scale.
Unit- 4.0 Sections and Sectional Views of Right Angular Solids 7hrs
Section of Solids (Prism, Cylinder, Pyramid, Cone), Auxiliary Views; Development of Surfaces
Of Right Regular Solids- Prism, Pyramid, Cylinder And Cone; Draw The Sectional Orthographic
Views of Geometrical Solids, Objects From Industry And Dwellings (Foundation To Slab Only).
Unit- 5.0 Isometric Projections 7hrs
Isometric Views, Compound Solids; Principles of Isometric Projection Isometric Scale,
Conventions; Isometric Views of Lines, Planes, Simple and Conversion of Isometric Views
toOrthographic Views And Vice-Versa, Conventions.
Unit- 6.0 Overview of Computer Graphics 7hrs
Listing the Computer Technologies that Impact on Graphical Communication, Demonstrating
Knowledge of the Theory of CAD Software [Such As: The Menu System, Toolbars (Standard,
Object Properties, Draw, Modify And Dimension), Drawing Area (Background, Crosshairs,
Coordinate System), Dialog Boxes And Windows, Shortcut Menus (Button Bars), The
Command Line (Where Applicable), The Status Bar, Different Methods of Zoom as Used in
CAD, Select and Erase Objects.; Isometric Views of Lines, Planes, Simple And Compound
Solids.

Text/ Reference:-
1. Engineering Drawing, N.D. Bhatt, Charotar Publishing House, 53rd Edition, ISBN: 978-
9380358277
2. A Textbook of Engineering Drawing, R.K. Dhawan, S. Chand Publishing, Revised
Edition, ISBN: 978-8121929571
3. Engineering Drawing and Graphics, K. Venugopal, V. Prabhu Raja, New Age
International Publishers, 3rd Edition, ISBN: 978-8122430120
4. Engineering Graphics with AutoCAD, D.M. Kulkarni, A.P. Rastogi, A.K. Sarkar, PHI
Learning Pvt. Ltd., 1stEdition, ISBN: 978-8120337834
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100215P Engineering Chemistry Lab 0021

Perform any 10 Experiments

1. To estimate hardness of water by alkalinity method

2. To estimate hardness of water by EDTA method
3. To remove hardness of water by ion exchange method
4. Determination of pH of a given acid solution using a standard sodium hydroxide solution
5. Determination of surface tension and viscosity
6. Chemical analysis of salt (Acid radical and basic radical)
7. Adsorption of acetic acid by charcoal
8. Test of adulteration of fat butter, sugar, turmeric powder, chilli powder and pepper
9. Saponification/ acid value of an oil
10. Identification of organic substances and their functional groups
11. Potentiometric determination of redox potentials and emf
12. Synthesis of drug/ polymer like ASPRIN/ Urea- formaldehyde resin
13. Thin layer chromatography
14. Analysis of flue gas by orsatapparatus
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100216P Communicative English Lab 0021

Perform any 10 Experiments

Introduction: Language Lab of English includes Listening Comprehension, Reading
Comprehension, Speaking Skills: Phonetics, International Phonetic Alphabet Symbols (IPAS),
Sounds: Vowels and Consonants, Pronunciation, Intonation, Stress and Rhythm, Just A Minute
Technique (JAM), Communication: Verbal and Non-Verbal; Ethical Usage of Artificial
Intelligence, Self-Introduction: Social, Academic and Professional; Interview: Online and
Offline; Oral Presentation, Debate, Group Discussion, Group-Activities, and Brainstorming
Vocabulary Activities.
1. Listening Comprehension and Speed (Software)
2. Reading Comprehension and Speed (Software)
3. Pronunciation: Learning and Test (Software)
4. Self-Introduction: Social, Academic and Professional
5. English Typing: Microsoft Word Document (MS Word), and Microsoft Power Point
Presentation (PPT)
6. Oral Presentation
7. Interview: Online and Offline
8. Just A Minute Technique (JAM) and Extempore
9. Debate
10. Group Discussion
11. Activities: Role Play, Peer Activities, and Group Activities
12. Anchoring and Addressing: an Assembly, a Meeting, a Seminar, a Party
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100209P Basic Electronics Lab 0021

Perform any 10 Experiments
1. Study of Cathode Ray Oscilloscope (CRO) (a) Measurement of amplitude, time period and
frequency of unknown continuous signals.
2. Identification of active and passive component.
3. Study the characteristics of P-N junction diode under (a) Forward bias, and (b) Reverse bias.
4. Study of clipping circuits and clamping circuits.
5. To recognize a half -wave rectifier and full-wave rectifier using sinusoidal voltage.
6. Study of Full wave rectifier using Capacitor filter.
7. To recognize voltage regulator using Zener diode.
8. Study of the input and output characterization of common base (CB) bipolar junction transistor.
9. Study the input and output characterization of common emitter (CE) bipolar junction transistor.
10. Study the output and transfer characteristics of JFET (Junction field effect transistor)
11. Study of operational amplifier as (i) Inverting (ii) Non-inverting amplifier.
12. Study of operational amplifier as (i) Integrator (ii) Differentiator.
13. Construction and verification of all other gate (AND, OR, NOT, XOR) using only a) NOR gate b)
only NAND gate.
 Group B 1st & 2nd Sem (SESSION 2024 onwards)

Course Code-100217P Engineering Graphics and Design Lab 0042

Perform any 10 Experiments

1. (Which includes dimensioning methods, different types of line, construction of different

polygon, divide the line and angle in parts, use of stencil)
2. Construction of Plane, Diagonal &Vernier Scales.
3. Construction of Ellipses, Parabolas, and Hyperbolas using the general method.
4. Construction of cycloid, epicycloid, hypocycloid, and involute of a circle.
5. Projection of Points and Lines inclined to both planes.
6. Projections of Planes (e.g., rectangular, triangular) in inclined positions.
7. Projection of Solids (prisms,pyramids, cones, and cylinders)
8. Drawing of Sections of Prisms, Cylinders, Pyramids, and Cones.
9. Development of Surfaces for prisms, pyramids, cylinders, and cones.
10. Construction of Isometric views of lines, planes, and simple solids.
11. Introduction to CAD Software.
12. Use of CAD software to draw basic geometric shapes, apply dimensions, and modify
objects.