Conversion Delphi DPS DP200 DP100 PDF
Conversion Delphi DPS DP200 DP100 PDF
8524A180X 8524A300W DPS V8861A190W-1 DP100 Ford 7830 tractor 400 cubic inches
8524A181X 8524A300X DPS V8861A190W-1 DP100 Ford 7830 tractor 400 cubic inches
8524A182X 8524A300Y DPS V8861A190W-1 DP100 Ford 7830 Tractor 400 cubic inches
8524A182Y 8524A301W DPS V8861A190W-1 DP100 Ford Tractor 7830 400 cubic inches
- 8524A301X DPS V8861A190W-1 DP100 Ford 7830 Tractor 400 cubic inches
8523A491Y 8523A641W DPS V8860A350W-1 DP100 Ford 6630 tractor 301 cubic inches
8523A492X 8523A641X DPS V8860A350W-1 DP100 Ford 6630 Tractor 301 cubic inches
8523A470X 8523A630W DPS V8860A350W-1 DP100 Ford 5630 tractor 268 cubic inches
8523A471Y 8523A631W DPS V8860A350W-1 DP100 Ford 5630 Tractor 268 cubic inches
8523A472X 8523A631X DPS V8860A350W-1 DP100 Ford 5630 tractor 268 cubic inches
8523A471Y 8523A631Y DPS V8860A350W-1 DP100 Ford 5630 tractor 268 cubic inches
8523A510X 8523A650W DPS V8860A380W-1 DP100 Ford 7630 tractor 301 cubic inches
8523A511Y 8523A651W DPS V8860A380W-1 DP100 Ford 7630 tractor 301 cubic inches
8523A512X 8523A651X DPS V8860A380W-1 DP100 Ford 7630 tractor 301 cubic inches
8523A513Y 8523A651Y DPS V8860A380W-1 DP100 Ford 7630 tractor 301 cubic inches
Important note: To replace the pumps below, the pump gearing on engine number Perkins 41115126 must be changed. This new injection pump consists of injection advance.
for cold start.
V3640F390T V3640F410G-1 DPA V3642F871G-1 DPA MF265E/MF265
V3640F410G-1 - DPA V3642F871G-1 DPA MF265E/MF265 3236/4000/4001
V3640F380W V3640F400G-2 DPA V3642F861G-2 DPA MF275/MX3000
V3640F400G-2 - DPA V3642F861G-2 DPA MF275/MX3000 3236/4000/4001
V3640F420G-2 - DPA V3642F831G-1 DPA MF5275/MF5335 3236/4000/4001
MF610/MF96/MF283/MF290/MF5285/
V3640F400G-1 - DPA V3642F891G-1 DPA 3236/4000/4001
MF5290/MF5340
Important: Due to the design of the DPA pump, it is necessary to adjust and/or replace the supply and return tubes of the bbas below, as the curvatures and lengths are different.
Important note: To replace the pump below, it is necessary to change the pump gearing on the engine number Valtra 836747864, and make some adjustments to the high and low pressure piping.
Important note: When these models of equipment have a Stanadyne pump, it is necessary to make some adjustments to the high and low pressure lines.
Stanadyne - - V3663F130G-1 DPS MF 660 1006.6T
Stanadyne - - V3663F140G-1 DPS MF 680 1006.6T
Stanadyne - - V3663F091G DPA MF299 MF 640 1006.6T
Important note: It is necessary to adjust according to the Bosch test plan and also to set the engine point (Flavio from Õrlandia/SP has already applied several bbas)
v8860....-e 4 cylinder
8921a245w replace v8861a220w-1
ANTIGUO NEW
ACTION AXIS 5139-041A 7123-657B
shock absorber of
same diaphragm of the pump cookie 7139-159B
advance
7180-869a 7185-041a