NRF-241-PEMEX-2010

Normalization Committee of TRANSMITTER INSTRUMENTS OF

Rev. 0
Mexican Petroleum and PRESSURE AND DIFFERENTIAL PRESSURE
Subsidiary Organisms PAGE 21 OF 24

12.2 Specification sheet for pressure and differential pressure transmitting instruments.

SPECIFICATION SHEET REV. For DATE REVIEW

CONTRACT DATE
TRANSMITTER INSTRUMENTS
OF PRESSURE / TRANSMITTERS
OF DIFFERENTIAL PRESSURE REQUISITION

(Page 1 of 2) I prepare a valid review

TRANSMITTER BODY PERFORMANCE CHARACTERISTICS

1.▲ Body Type/ Flange 34.▲ Test pressure
2.▲ Connection to Process 35.▲ Exactitud / Rangeabilidad
3.▲ Vent diameter / drain 36.▲ Repeatability
4.▲ Assembly 37.▲ Stability
Percentage of error by
5.▲ Body material / flange 38.n
ambient temperature
6.l Ventilation / drainage material 39.l Error due to shock and vibration
Error due to variations of
7.l Material of the bolts 40.l
operating pressure
Error due to variations in the
8.▲ Adapter material 41.l
electric supply
9.l Packaging material / ring 42.l Dead Band
Accessory material of
10.l
assembly
ACCESSORIES
SENSOR ELEMENT 43. Remote indicator
11.▲Type of sensor 44.▲ Handle/Material/Connections
12.l Measurement interval 'Span' 45. Portable manual configurator
13.▲Sensor material 46.▲ Others
TRANSMITTER SPECIAL REQUIREMENTS
Identification according to
14.▲Nominal Range 47.▲
project
15.▲Tipo de señal de salida 48.▲ Reference specification
Box Type or Classification
16.▲ 49.▲ Special preparation
Electric
Compliance with standards
17.▲Digital communication 50.▲
standard
18.▲Electrical Supply 51.l Software configuration
Local indication/Unit of
19.▲ 52.▲ Function blocks
measurement
20.n Load limitation 53.▲ Advanced Diagnostics
21.▲Certification/approval 54. NIS Level (SIL)
Botones de configuración
22.▲Zero Adjustment -Span 55.
local
23.l Diagnoses 56. Tiempo de respuesta
24.▲Material and IP grade of the box DIAPHRAGM SEAL
25.l Electric consumption 57.▲ Type of seal
PHYSICAL DATA 58. Connection to the instrument

26.n Weight 59.▲ Length of the capillary/diameter

27.n Dimensions 60. Diaphragm material
28.▲Electrical connection 61.▲ Material of the upper flange
Environmental Conditions 62.▲ Material of the lower flange
29.▲Atmospheric pressure 63.l Screw material
30.▲Ambient temperature 64.l Packaging material
31.▲Relative humidity 65. Filling liquid
Notes:
 NRF-241-PEMEX-2010
Normalization Committee of TRANSMITTER INSTRUMENTS OF
Rev. 0
Mexican Petroleum and PRESSURE AND DIFFERENTIAL PRESSURE
Subsidiary Organizations PAGE 22 OF 24

SPECFICATION SHEET
REV. FOR DATE REVIEW
PRESSURE TRANSMITTER INSTRUMENTS /
Differential Pressure Transmitters
(Page 2 of 2)

Pressure of TEMPERATURE OF
RANGE
IDENTIFICATION PROCESS PROCESS SERVICE NOTES
CALIBRATED
MAX. / NOR. / MIN. MAX. / NOR. / MIN.
▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲ ▲

Notes:
Symbol▲: For direct acquisition, the data must be provided by PEMEX; For IPC (Engineering) type projects.
search and construction), turnkey or public tender the data must be provided by the supplier or contractor.
SymbollData that may be provided by PEMEX, otherwise, must be provided by the
provider or contractor.
Symboln: Datos que deben ser proporcionados por el proveedor o, contratista.
 NRF-241-PEMEX-2010
Normalization Committee of TRANSMITTER INSTRUMENTS OF
Rev. 0
Mexican Petroleum and PRESSURE AND DIFFERENTIAL PRESSURE
Subsidiary Organizations PAGE 23 OF 24

12.3 Sensors for pressure and differential pressure transmitter instruments (Informative).

INTERVAL OF MATERIAL OF THE

APPLICATIONS SENSOR EXACTITUD MEASUREMENTEXIT SIGN WET PARTS
SPAN

Non-corrosive fluids:
Pressure
316 stainless steel.
manometric and
absolute
Monitoring of Capacitive cell: Corrosive fluids or
0-0.060 kg/cm2 4-20 mA/HART
pressure service bitter
0-0.35 kg/cm2
(manometric or Element 0.075% of the 'Span' Hastelloy-C.
0-2.1 kg/cm2 Foundation Fieldbus
absolute) in lines piezoresistive 0.065% of the 'Span'
0-10,68 kg/cm2
of process or Seawater: Monel.
0-21.38 kg/cm2 Profibus PA.
auxiliary services Resonant crystal:
0-57 kg/cm2
Fluids highly
0-285 kg/cm2
corrosives Monel
0-712.4 kg/cm2
Tantalum, Gold, Rhodium.

Non-corrosive fluids:
Pressure
stainless steel 316.
differential:
Corrosive fluids or
0-0.010 kg/cm2 4-20 mA/HART
service bitter
Monitoring of Capacitive cell: 0-0.35 kg/cm2
0.075% of the 'Span' Hastelloy-C.
differential pressure 0-63.5 cm of Foundation Fieldbus
0.065% of the "Span"
in teams Resonant crystal: water
Sea water: Monel.
0-635 cm of Profibus PA.
water
Fluids highly
0-163159.04 cm
corrosive Monel,
of water
Tantalum, Gold, Rhodium.
Pressure Non-corrosive fluids:
differential: stainless steel 316.

0-0.010 kg/cm2 Corrosive fluids or

4-20 mA/HART
Flow Monitoring 0-63.5 cm of service bitter
Capacitive cell:
(differential pressure 0.075% of the 'Span' water Hastelloy-C.
Foundation Fieldbus
in an element of 0.065% of the 'Span' 0-635 cm of
Resonant crystal:
flow measurement water Seawater: Monel.
Profibus PA.
0-2540 cm of
water Fluids highly
0-163159.04 cm corrosives Monel,
of water Tantalum, Gold, Rhodium.
Non-corrosive fluids:
Pressure
stainless steel 316.
differential:
Corrosive fluids or
0-63.5 cm of 4-20 mA/HART
service bitter
Capacitive cell: water
Level monitoring 0.075% of the "Span" Hastelloy-C.
0-635 cm of Foundation Fieldbus
in containers 0.065% of the "Span"
Resonant crystal: water
Sea water: Monel.
0-2540 cm of Profibus PA.
water
Fluids highly
0-163159.04 cm
corrosives Monel,
of water
Tantalum, Gold, Rhodium.
 NRF-241-PEMEX-2010
Normalization Committee of TRANSMITTING INSTRUMENTS OF
Rev. 0
Mexican Petroleum and PRESSURE AND DIFFERENTIAL PRESSURE
Subsidiary Organizations PAGE 24 OF 24

INTERVAL OF MATERIAL OF
APPLICATIONS SENSOR ACCURACY MEASUREMENT EXIT SIGN THE PARTS
SPAN DAMP
Pressure
manometric and
absolute: Fluids no
0-0.060 kg/cm2 corrosives steel
0-0.35 kg/cm2 stainless steel 316.
0-2.1 kg/cm2
0-10.68 kg/cm2 Corrosive fluids or
Capacitive cell: 4-20 mA/HART
Process control 0-21.38 kg/cm2 service bitter
2
variable Pressure 0-57 kg/cm Hastelloy-C.
Element 0.05% of the "Span" Foundation
(manométrica o 0-285 kg/cm2
piezoresistive 0.04% of the "Span" Fieldbus
absolute), variable 0-712.4 kg/cm2 Water of sea
Flow, variable Level Monel.
Resonant crystal: Profibus PA
Differential pressure:
0-0.35 kg/cm2 Highly fluids
0-63.5 cm of water corrosives: Monel,
0-635 cm of water Tantalio, Gold,
0-2540 cm of water Rodio.
0-101974.4 cm of
water
Pressure
manometric and
absolute
0-2,1 kg/cm2
Fluids no
Transfer of Capacitive cell: 0-10.68 kg/cm2 4-20 mA/HART
corrosive: steel
Custody and/or 0-21.38 kg/cm2 stainless steel 316.
Fiscal measurement Element 0.04% of the "Span" 0-57 kg/cm2 Foundation
variable Presión piezoresistive 0.0375% of the "Span" 0-285 kg/cm2 Fieldbus
Corrosive fluids or
(manometric) 0-712,4 kg/cm2
service bitter
variable Flow Resonant crystal. Profibus PA
Hastelloy-C.
Differential pressure:
0-63.5 cm of water
0-635 cm of water
0-2540 cm of water
Pressure
manometric and Fluids no
absolute corrosives steel
0-2.1 kg/cm2 stainless steel 316.
Systems
Capacitive cell: 0-10,68 kg/cm2
Instrumented with
0-21.38 kg/cm2 Corrosive fluids or
Security
Element 0.04% of the 'Span' 0-57 kg/cm2 service bitter
variable Pressure 4-20 mA/HART
piezoresistive 0.0375% of the 'Span' 0-285 kg/cm2 Hastelloy-C.
(manometric),
0-712,4 kg/cm2
variable Flow,
Resonant crystal: Highly fluids
variable Level
Differential pressure: corrosives: Monel,
0-63.5 cm of water Tantalio, Gold
0-635 cm of water Rodio.
0-2540 cm of water