Code Compliance Research Report
CCRR-0464
Issue Date: 09-27-2022
Revision Date: 09-14-2025
Renewal Date: 09-30-2026
DIVISION: 07 00 00 – THERMAL AND MOISTURE PROTECTION • Water-resistive barrier
Section: 07 25 00 – Weather Barriers • Air barrier material
Section: 07 27 00 – Air Barriers • Drainage efficiency
• Surface-burning characteristics
REPORT HOLDER:
Veer Plastics Private Limited 1.3 VHouse HP and VHouse HP Max Breathable
104 Sardar Patel Colony, Stadium Road Housewraps have been evaluated for the following uses
Navjivan, Ahmedabad 380014 (see Table 1):
India
• Under the 2024 and 2021 IBC and IRC, use as a water-
91-79-27681159
resistive barrier referenced in IBC Sections 1403.2 and
[Link]
2510.6, and IRC Sections R703.2 and R703.7.3.
• Under the 2018 IBC and IRC, use as an alternative to
REPORT SUBJECT:
water-resistive barriers referenced in IBC Section
VHouse HP and VHouse HP Max Breathable Housewraps
1403.2 and IRC Section 703.2.
• Use as an air barrier material under IRC Section
ADDITIONAL LISTEE:
N1102.5.1 and IECC Sections C402.[Link].
Cameron Ashley Building Products
979 Batesville Road, Suite A
2.0 STATEMENT OF COMPLIANCE
Greer, SC 29651
[Link]
VHouse HP and VHouse HP Max Breathable Housewraps
comply with the Codes listed in Section 1.1, for the
ADDITIONAL LISTEE SUBJECT:
properties stated in Section 1.2, and uses stated in Section
Canopy Max and Canopy Premium Drainable Breathable
1.3, when installed as described in this report, including the
Housewraps
Conditions of Use stated in Section 6.0.
1.0 SCOPE OF EVALUATION
3.0 DESCRIPTION
1.1 This Research Report addresses compliance with the
3.1 VHouse HP Breathable Housewrap is a multi-layered
following Codes:
building wrap with a UV stabilized nonwoven on the
• 2024, 2021, and 2018 International Building Code® (IBC) exposed side, laminated to a nonwoven layer on the
• 2024, 2021, and 2018 International Residential Code® sheathing side. At 13 mil thickness, it comes in custom
(IRC) widths of 36 to 120 inches, and roll lengths of 100 and
• 2024, 2021, and 2018 International Energy Conservation 150 feet.
Code® (IECC)
VHouse HP Breathable Housewrap is labeled as Canopy
NOTE: This report references the most recent Code Max Breathable Housewrap for Cameron Ashley Building
editions noted. Section numbers in earlier editions may Products.
differ.
3.2 VHouse HP Max Breathable Housewrap is a multi-
1.2 VHouse HP and VHouse HP Max Breathable layer building wrap with a UV stabilized nonwoven on the
Housewraps have been evaluated for the following exposed side, laminated to a nonwoven layer on the
properties (see Table 1): sheathing side and has a textured exterior for drainage
• Physical properties
545 E. Algonquin Road • Arlington Heights • Illinois • 60005
[Link]/building
PCA-101
Version: 11 November 2024 SFT-BC-CCRR-OP-19a Code Compliance Research Report
Code Compliance Research Report CCRR-0464 Page 2 of 3
purposes. At 22 mil thickness, it comes in custom widths one layer of the housewrap must be installed in
of 36 to 120 inches and roll lengths of 100 and 150 feet. accordance with IBC Sections 2510.6.1, 2510.6.2 or IRC
Section 703.7.3.
VHouse HP Max Breathable Housewrap is labeled as
Canopy Premium Housewrap for Cameron Ashley Building For use in Types I, II, III, or IV construction under the IBC,
Products. the housewraps are limited to use in walls which the
water-resistive barrier is the only combustible component
4.0 PERFORMANCE CHARACTERISTICS and the exterior wall has a wall covering of brick, concrete,
stone, terra cotta, stucco or steel, with minimum
4.1 VHouse HP and VHouse HP Max Breathable thicknesses in accordance with Table 1404.2.
Housewraps meet the requirements of ICC-ES AC38.
6.0 CONDITIONS OF USE
4.2 VHouse HP and VHouse HP Max Breathable
Housewraps meet the requirements of ASTM E2556, Type 6.1 Installation must comply with this Research Report,
II. the manufacturer’s published installation instructions,
and the applicable Code. In the event of a conflict, this
4.3 VHouse HP and VHouse HP Max Breathable report governs.
Housewraps have an air leakage rate no greater than
0.02 L/s-m2 at 75 Pa when tested in accordance with 6.2 The housewraps must be covered with an approved
ASTM E2178. exterior wall covering in accordance with the applicable
Code.
4.4 VHouse HP Max Breathable Housewrap has a
drainage efficiency rating of 90% or more, when tested in 6.3 VHouse HP and VHouse HP Max Breathable
accordance with ASTM E2273. Housewraps are manufactured by Veer Plastics Private
Limited and is under a quality control program with
4.5 VHouse HP and VHouse HP Max Breathable inspections by Intertek Testing Services NA, Inc.
Housewraps have a flame spread index of 25 or less and a
smoke developed index of 450 or less when tested in 7.0 SUPPORTING EVIDENCE
accordance with ASTM E84.
7.1 Reports of tests in accordance with ASTM E2178,
5.0 INSTALLATION ASTM E2273, ASTM E2556, AATCC 127, and ASTM E84.
5.1 General: VHouse HP and VHouse HP Max Breathable 7.2 Data in accordance with the ICC-ES Acceptance
Housewraps must be installed in accordance with the Criteria for Water-resistive Barriers (AC38), approved
manufacturer’s published installation instructions, the August 2016.
applicable Code, and this Research Report. A copy of the
manufacturer’s instructions must be available on the 7.3 Intertek Listing Report "Veer Plastics – VHouse HP
jobsite during installation. and VHouse HP Max Breathable Housewraps" on the
Intertek Directory of Building Products.
When used as a water-resistive barrier, VHouse HP and
VHouse HP Max Breathable Housewraps must be installed 7.4 Intertek Listing Report "Cameron Ashley Building
as described in IBC Section 1403.2, IRC Section R703.2, Products – Canopy Breathable Housewraps" on the
and N1102.5.1.1, and in accordance with the Intertek Directory of Building Products.
manufacturer’s published installation instructions.
8.0 IDENTIFICATION
VHouse HP and VHouse HP Max Breathable Housewraps
may be used as a water-resistive barrier in exterior stucco The VHouse HP and VHouse HP Max Breathable Housewraps
applications over wood-based sheathing, provided that are identified with the manufacturer’s name, the product
545 E. Algonquin Road • Arlington Heights • Illinois • 60005
[Link]/building
PCA-101
Version: 11 November 2024 SFT-BC-CCRR-OP-19a Code Compliance Research Report
Code Compliance Research Report CCRR-0464 Page 3 of 3
name, the Intertek Mark as shown below, the Intertek 10.1 Approval of building products and/or materials can
Control Number, and the Code Compliance Research Report only be granted by a building official having legal authority
number (CCRR-0464). in the specific jurisdiction where approval is sought.
10.2 Code Compliance Research Reports shall not be
used in any manner that implies an endorsement of the
product by Intertek.
10.3 Reference to the [Link] is
recommended to ascertain the current version and status
9.0 OTHER CODES of this report.
This section is not applicable.
10.0 CODE COMPLIANCE RESEARCH REPORT USE
TABLE 1 – PROPERTIES EVALUATED
2024 IBC 2024 IRC 2021 IBC 2021 IRC 2021 IECC
PROPERTY
SECTION1 SECTION1 SECTION1 SECTION1 SECTION1
1403.2 R703.2 1403.2 R703.2
Water-resistive Barrier NA
2510.6 R703.7.3 2510.6 R703.7.3
Exterior Walls of Types I-IV
1402.6 N/A 1402.5 N/A NA
Construction
N1102.5.1 N1102.5.1
Air Barrier NA NA C402.[Link]
N1102.5.1.1 N1102.5.1.1
1
Section numbers may be different for earlier versions of the IBC, IRC, and IECC
This Code Compliance Research Report (“Report”) is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and
its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to
the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this Report. Only the Client is authorized to permit
copying or distribution of this Report and then only in its entirety, and the Client shall not use the Report in a misleading manner. Client further agrees and
understands that reliance upon the Report is limited to the representations made therein. The Report is not an endorsement or recommendation for use of the
subject and/or product described herein. This Report is not the Intertek Listing Report covering the subject product and utilized for Intertek Certification and
this Report does not represent authorization for the use of any Intertek certification marks. Any use of the Intertek name or one of its marks for the sale or
advertisement of the tested material, product or service must first be approved in writing by Intertek.
545 E. Algonquin Road • Arlington Heights • Illinois • 60005
[Link]/building
PCA-101
Version: 11 November 2024 SFT-BC-CCRR-OP-19a Code Compliance Research Report
