Mercedes-Benz trucks

2423K
Heavy Truck
c Load capacity, power, torque, greater durability, facilitate operation and maintenance in hard-to-reach locations
speed in diagnostics and lower maintenance demand. such as construction sites, providing greater
Decisive factors for choosing a vehicle like the Mercedes- visibility, maneuverability and comfort for the driver.
Benz 2423 K. c The safety is ensured by the service brake with pressure of
c Primarily destined for the construction markets 10 bar work, combined with the exclusive Top Brake engine brake.
In mining, this truck has a power take-off in the transmission, These and other equipment show the constant concern
dispensing adaptation by third parties in the installation of scales. The from Mercedes-Benz with the well-being of those who work with the
chassis, with double beams, combines robustness with resistance, trucks of the brand.
making the 2423 K ideal for severe working conditions. c Mercedes-Benz 2423 K. For those looking for strength, quality,
c A compact vehicle, with an advanced cabin designed to performance and economy.
Motor Performance curves of the OM-906 LA engine

Model MB OM-906 LA, with electronic management Values according to NBR ISO 1585.
Emission indices according to Proconve P-5 (Euro III).
Tipo 6 vertical inline cylinders, turbocooler Net max. power: 170 kW (231 hp) at 2200 rpm
Maximum power, according to NBR ISO1585 170 kW (231 hp) at 2200 rpm Maximum torque: 810 Nm (83 mkgf) from 1200 to 1600 rpm
Maximum torque, according to NBR ISO 1585 810 Nm (83 mkgf) from 1200 to 1600 rpm Minimum specific consumption: 195 g/kWh (143 g/cvh) at 1500 rpm
Specific consumption 195 g/kWh (143 g/cvh) at 1500 rpm
Alternator (V/A) 28/80
Battery (quantity x Ah/V) 2 x135/12

Transmission
Clutch Ø 395 mm; monodisc; servo-assisted
Gearbox Eaton FS 6209 A
Synchronized marches 8 (+1 super-reduced)
Power take-offs Hydrocar, type 2266 in the gearbox

Axes
Front axle MB VL 3/8 D - 6.5
1st rear axle MB HD 4/02 DG - 10
2nd rear axle MB HD 4/02 D - 10

Reductions 5,857 (41:7)

5,714 (40:7)
4.3 (43:10)* Emissions in compliance with Proconve P-5 (Euro III)

Chassis
Frame/Type staircase, riveted
Profile dimensions 255 mm x 74 mm/espessura:7,0 mm
Material LNE 50
Front suspension Trapezoidal springs, with double-acting telescopic dampers and stabilizer bar
Rear suspension Type 'boogie', with inverted semi-elliptical springs and centrally articulated
Rings 7.50 x 22 7.50 x 20*
Tires 10.00 - 20 PR16 10.00 R20 PR16*
Power steering ZF 8097
Fuel tank 210 plastic

Vehicle Performance
2423 K, with Eaton FS 6209 A gearbox and 10.00 - 20 PR16 tires
Reduction i= 5,857 (41:7)
Maximum speed (km/h) 82
Ramp climbing capacity (in motion): with 23,000 kg (%) 55
with 26.500 kg (%) 46
with 32,000 kg (%) 37
Ramp climbing ability (starting on a ramp): with 23,000 kg (%) 39
with 26.500 kg (%) 32
with 32,000 kg (%) 26

Weights and Capacities (kg) Brakes

Vehicle without load, in operational condition Service Brake compressed air, two circuits, drum on the wheels
Front axle 3.220 front and rear
1st rear axle 1.865 Total braking area: front axle 2.129 cm2
2nd rear axle 1.865 1st rear axle 2.129 cm2
Total 6.950 2nd rear axle 2.129 cm2
Maximum useful load (technical/legal) 1.9550/16.050 total 6.387 cm2

Technically/Legally Admissible Weights Parking Brake

Front axle 6,000/6,000 Type spring accumulator chamber, pneumatically activated,
1st rear axle 10.250/8.500 with performance in the rear wheels
2nd rear axle 10.250/8.500
Total Gross Weight (TGW) 26.500/23.000 Additional Brake – Engine
Maximum Traction Capacity (MTC) 32,000 Type Top Brake (+ engine brake)
Activation electropneumatic, being able to operate together
(*) Optional with the service brake

Dimensions (mm)
Chassi com cabina, sem carroçaria ou implemento
A -Wheelbase 3,600 2423 K
B - Total length 7.617 P

C - Width 2.485
D - Height: loaded 2.696
O
discharged 2.750 D
E - Bitola - front axle 1969
F - Bitola - rear axle 1880
G - Front balance 1.379 L M I

H - Rear balance 1.288 E

I Clearance – front axle 283 G A N H
J Free span - rear axle 256 B
K - Vehicle turning circle, Ø m 16.6
L - Entry angle: loaded 25°12'
downloaded 27°54’ K

M - Exit angle: loaded 34°45’

discharged 36°58’
N - Distance between rear axles 1.350 J

O - Height from the cabin to the chassis 1.713 F

P - Distance from the front axle to the beginning of the body 440 C

Some items mentioned or shown in this brochure are optional and may not be immediately available. specifications and the designs of the products without prior notice. The quality of
available for service. Visit a Mercedes-Benz Dealer and discover the multiple The environment is respected by the technology of Mercedes-Benz products. For
settings offered by the most complete line of commercial vehicles in the country. In the interest for more information, call 0800 970 90 90You access [Link].