Page 1 of 7
MATERIAL SAFETY DATA SHEET
Genesol 704
Section 01 - Product And Company Identification
Product Identifier …………………….... Genesol 704
Product Use …………………………...... Membrane cleaner.
Supplier Name……………………….…. ClearTech Industries Inc.
1500 Quebec Avenue
Saskatoon, SK. Canada
S7K 1V7
Prepared By................……………..…... ClearTech Industries Inc. Technical Department
Phone: 800-387-7503
24-Hour Emergency Phone…………... 800-387-7503
Section 02 - Hazard Identification
Inhalation...................………….….... May cause coughing, tightness of the chest and irritation of the respiratory
system.
Skin Contact / Absorption…….….... Causes irritaton and burns when in contact with skin.
Eye Contact................………….….... Causes severe irritation and burns when in contact with eyes. Causes
serious eye damage.
Ingestion.....................………………. Product causes irritation and burns if ingested.
Page 2 of 7
Exposure Limits……………………... None established.
Section 03 - Composition / Information on Ingredients
Ingredients........................................... Tetrasodium EDTA 10-20 % w/w
Sodium Hydroxide 10-20 % w/w
CAS Number...................…….……..... Tetrasodium EDTA 64-02-8
Sodium Hydroxide 1310-73-2
Synonym (s)...................……………... None
Section 04 - First Aid Measures
Inhalation....................……………….. Remove victim to fresh air. Give artificial respiration only if breathing has
stopped. If breathing is difficult, give oxygen. Seek immediate medical
attention.
Skin Contact / Absorption………….. Remove contaminated clothing. Wash affected area with soap and water.
Seek medical attention if irritation occurs or persists.
Eye Contact..................…………….... Contact lenses should never be worn when working with this product.
Flush immediately with water for at least 20 minutes. Forcibly hold eyelids
apart to ensure complete irrigation of eye tissue. Seek immediate medical
attention.
Ingestion......................………………. Do not induce vomiting. If patient is conscious, drink plenty of water and
rinse mouth out with water. Seek immediate medical attention.
Additional Information.....…………... Not available.
Section 05 - Fire Fighting Measures
Conditions of Flammability……….... Not determined.
Means of Extinction........…………..... Use as appropriate: Carbon dioxide [CO2], dry chemical, foam.
Flash Point....………………………….. Not applicable.
Auto-ignition Temperature…………. Not available.
Upper Flammable Limit …………….. Not determined.
Page 3 of 7
Lower Flammable Limit...……….…... Not determined.
Hazardous Combustible Products... Not available.
Special Fire Fighting Procedures..... Wear NIOSH-approved self-contained breathing apparatus and protective
clothing.
Explosion Hazards………………….... Not available.
Section 06 - Accidental Release Measures
Leak / Spill................….……………... Wear appropriate personal protective equipment. Ventilate area. Only enter
area with PPE. Stop or reduce leak if safe to do so. Prevent material from
entering sewers. Avoid raising dust. Flush with water to remove any
residue. Larger spills should be isolated and absorbed onto sand or similar
inert material. Contain in labelled, plastic containers and dispose at an
approved waste site.
Deactivating Materials...……….…... Not available.
Section 07 - Handling and Storage
Handling Procedures.......…………... Use proper equipment for lifting and transporting all containers. Use
sensible industrial hygiene and housekeeping practices. Wash thoroughly
after handling. Avoid all situations that could lead to harmful exposure.
Storage Requirements......……...….. Store in a cool, dry place, away from acids. Keep container closed when
not using product.
Section 08 - Exposure Controls and Personal Protection
Protective Equipment
Eyes.………………………….………... Chemical goggles, full-face shield, or a full-face respirator is to be worn at
all times when product is handled. Contact lenses should not be worn; they
may contribute to severe eye injury.
Respiratory…………………………...... A NIOSH/MSHA approved respirator equipped with dust, mist, and fume
cartridges is recommended.
Gloves………………………………...... Impervious gloves of chemically resistant material (rubber or PVC) should
be worn at all times. Wash contaminated clothing and dry thoroughly
before reuse.
Page 4 of 7
Clothing………………………..……..... Body suits, aprons, and/or coveralls of chemical resistant material should
be worn at all times. Wash contaminated clothing and dry thoroughly before
reuse.
Footwear……………………………...... Impervious boots of chemically resistant material should be worn at all
times. No special footwear is required other than what is mandated at
place of work.
Engineering Controls
Ventilation Requirements………...... Mechanical ventilation (dilution or local exhaust), process or personnel
enclosure and control of process conditions must be provided in
accordance with all fire codes and regulatory requirements. Supply
sufficient replacement air to make up for air removed by exhaust systems.
Other………………………………….... Emergency shower and eyewash must be available and tested in
accordance with regulations and be in close proximity.
Section 09 - Physical and Chemical Properties
Physical State.......……....………….... Solid
Odor and Appearance…..………….... White powder/granules.
Odor Threshold....……………............ Not available.
Specific Gravity (Water=1)………….. Not available.
Vapor Pressure (mm Hg, 20oC)….…. Not applicable.
Vapor Density (Air=1)..…………….... Not applicable.
Evaporation Rate........……..…….….. Not applicable.
Boiling Point...............………….…..... Not applicable.
Freeze/Melting Point....…………….... Not applicable.
pH............................……………….….. 11.5-12.5 @ ~1% solution
Water/Oil Distribution Coefficient.... Not applicable.
Bulk Density..............…………….…... ~ 1.3-1.4 g/cm 3
% Volatiles by Volume………..……... Not applicable.
Solubility in Water...………………..... Soluble.
Page 5 of 7
Molecular Formula......………….….... Not available.
Molecular Weight........……………..... Not available.
Section 10 - Stability and Reactivity
Stability.................…………....……………. Stable under normal storage conditions.
Incompatibility..............…………..……….. Alkali metals, aluminum, strong acids, strong bases, strong oxidizing
agents, zinc.
Hazardous Products of Decomposition.. Burning produces irritating, toxic, and obnoxious fumes.
Polymerization...........…………….…….…. Not available.
Section 11 - Toxicological Information
Irritancy.................……..………….…. Causes burns to skin and eyes. Causes serious eye damage.
Sensitization........…….......…………. No sensitization effects reported.
Chronic/Acute Effects……...……….. Not available.
Synergistic Materials...……....……... Not available.
Animal Toxicity Data......…..………... Not available.
Carcinogenicity......……......………... Not available.
Reproductive Toxicity..…...………... Not available.
Teratogenicity..........….....…………... Not available.
Mutagenicity...........…….....…………. Not available.
Section 12 - Ecological Information
Fish Toxicity..................……………... Not available.
Biodegradability.............……….….... Not available.
Environmental Effects………………. Not available.
Page 6 of 7
Section 13 - Disposal Considerations
Waste Disposal...........…...…………... Dispose in accordance with all federal, provincial, and/or local regulations
including the Canadian Environmental Protection Act.
Section 14 - Transport Information
TDG Classification
Shipping Name................................... Genesol 704
Class……………..………………..….... 8
Group...............…………….......……... II
PIN Number.................……..……….... UN 3262
Other…………………………………..... Secure containers (full and/or empty) with suitable hold down devises
during shipment and ensure all caps, valves, or closures are secured in the
closed position.
PRODUCT CLASSIFICATION: This product has been classified on the preparation date specified at section
16 of this MSDS / SDS, for transportation in accordance with the requirements of part 2 of the
Transportation of Dangerous Goods Regulations. If applicable, testing and/or published test data
regarding the classification of this product are listed in the references at section 16 of this MSDS / SDS.
Section 15 - Regulatory Information
WHMIS Classification.......………….... E
NOTE: THE PRODUCT LISTED ON THIS MSDS HAS BEEN CLASSIFIED IN ACCORDANCE WITH THE
HAZARD CRITERIA OF THE CANADIAN CONTROLLED PRODUCTS REGULATIONS. THIS MSDS CONTAINS
ALL INFORMATION REQUIRED BY THOSE REGULATIONS.
Section 16 - Other Information
Version #................................................ One
Preparation Date.........…………….…... September 12, 2014
Revision Date.........…………….…........
Revision Note.........…………….…........
Page 7 of 7
Note: The responsibility to provide a safe workplace remains with the user. The user should consider the health
hazards and safety information contained herein as a guide and should take those precautions required in an
individual operation to instruct employees and develop work practice procedures for a safe work environment. The
information contained herein is, to the best of our knowledge and belief, accurate. However, since the conditions of
handling and use are beyond our control, we make no guarantee of results, and assume no liability for damages
incurred by the use of this material. It is the responsibility of the user to comply with all applicable laws and
regulations.
Attention: Receiver of the chemical goods / MSDS coordinator
As part of our commitment to the Canadian Association of Chemical Distributors (CACD) Responsible Distribution ®
initiative, ClearTech Industries Inc. and its associated companies require, as a condition of sale, that you forward
the attached Material Safety Data Sheet(s) to all affected employees, customers, and end-users. ClearTech will
send any available supplementary handling, health, and safety information to you at your request.
If you have any questions or concerns please call our customer service or technical service department.
ClearTech Industries Inc. - Locations
Corporate Head Office: 1500 Quebec Avenue, Saskatoon, SK, S7K 1V7
Phone: 800-387-7503
Fax: 888-281-8109
[Link]
Location Address Postal Phone Number Fax Number
Code
Richmond, B.C. 12431 Horseshoe Way V7A 4X6 800-387-7503 888-281-8109
Port Coquitlam 2023 Kingsway Avenue V3C 1S9 800-387-7503 888-281-8109
Calgary, AB. 5516E - 40th St. S.E. T2C 2A1 800-387-7503 888-281-8109
Edmonton, AB. 12020 - 142nd Street T5L 2G8 800-387-7503 888-281-8109
Saskatoon, SK. North Corman Industrial Park S7K 1V7 800-387-7503 888-281-8109
Regina, SK. 555 Henderson Drive S42 5X2 800-387-7503 888-281-8109
Winnipeg, MB. 340 Saulteaux Crescent R3J 3T2 800-387-7503 888-281-8109
Mississauga, ON. 355 Admiral Blvd Unit #1 L5T 2N1 800-387-7503 888-281-8109
24 Hour Emergency Number - All Locations - 800-387-7503