ESTIMATE WORK SHEET Frame Type : CS E.

H (M) :
PROJECT : Warehouse Width (M): 20 Length (M):
Q230067/21 Bldg 1 Area 2 Live Load (KN/m2) on purlins : 0.57 On frame :
Rev: 00 Base on PIF Rev/CO: 00 Collateral on frame (KN/m2): On roof:
34.5kN/cm2 (BU); 45.0kN/cm2 (CF) Occupancy category: II Explosure:
YIELD GRADE:
24.5kN/cm2 (HR) Seismic: None Bays spacings: 1@7m+2@8m+1@7m
Done BY: Thuan Building Area (WidthXLength) (M2) =
Chk. By: Nguyen Total weight (Kg) =
Date: 11-Dec-25 Weight per Square Meter =

PART#01 : MAIN MATERIAL

1 2 3 4 5 6

Line Piece
Description of Material Type
No. Quantity Measure PEUnit
1 Main Frames:
2 BUilt up frames including connections BU 1 7952.5 Kg
3 Strut tubes 150x150x2.5 HR2 9 7.0 M
4 Flange Brace CF 160 2.5 Kg
5 Purlins
6 Purlins 200Z1.8@900 0.755M lap for all bays CF 10 37.3 M
7 Eave Purlins 250Z2.0 CF 2 37.3 M
8 Side Wall Girts
9 Girts 200Z1.5@900 1M lap for end bays CF 10 17.6 M
10 Girts 2500Z1.5@900 0.755M lap for other bays CF 10 20.2 M
11 End Wall Girts
12 Girts 200Z1.5@900 0.755M lap for all bays CF 24 70.9 M
13 Sheeting
14 Roof Panel 0.5mm HiRibs-32 RS1 1 625.3 M2
15 Side Wall Panel 0.5mm HiRibs-32 WS 1 186.7 M2
16 End Wall Panel 0.5mm HiRibs-32 WS 1 73.2 M2
17 Frame Openings
18 Frame opening (width=1.6M x height=1.4M) CF 22 37.1 M
19 Frame opening (width=1.5M x height=2.5M) CF 1 6.6 M
20 Canopy (REW, Qty=1,W=4m,L=7m,Eave Trim)
21 Canopy Purlins 250Z1.8@900 no lap CF 6 8.2 M
22 Add. Girts 200Z1.5 CF 1 8.2 M
23 Roof Panel 0.5mm HiRibs-32 RS1 1 28.6 M2

QF-DES-07/02 (8/12/2016)
PART#02 :SPECIAL STRUCTURE
1 2 3 4 5 6

Line Piece
Description of Material Type
No. Quantity Measure PEUnit

PART#03: ACCESSORIES MATERIAL

1 2 3 4 5 6

Line Piece
Description of Material Type
No. Quantity Measure PEUnit
1 Miscellanoueus for Main Frames:
2 Mechine Bolts MB 1 296.6 Kg
3 High Bolts HB 1 131.6 Kg
4 Anchor Bolts-Hot dip galvanized AB 10 4.4 Set
5 Cable Bracing 16mm diameter M24 CB 13 2.0 Set
6 Sag arrestor purlin block /Clip SAR 12 21.1 M
7 Sag arrestor sidewall block /Clip SAR 12 6.3 M
8 Sag arrestor endwall block /Clip SAR 9 3.7 M
9 Uni-Steel Ridge Sign 1 02 Nos
10 Sheeting Accessories
11 Eave Angle, Gable angle, Base Angle/Ridge angle/Sheeting angle EA 1 222.8 M
12 Trim type 1: <= 600mm TR 1 291.8 M
13 Foam closure FCL 1 583.6 M
14 Eave Gutter 0.6mm EG 2 30.6 M
15 PVC Down Spouts PVC 10 4.1 M
16 Insulation Fiberglass 50mm IS1 2 330.6 M2
17 Additional Items
18 Single personal door (1.5M x 2.5M) SPD 1 3.8 M2

MATERIAL FORECAST Weight of Built up (kgs):

BUILT-UP COLD-FORMED HOT-ROLLED Weight of Built up 1 (kgs):
Thk(mm) Weight(kg) Section Weight(kg) Section Weight(kg) Weight of Built up 2 (kgs):
4.00 200Z1.5 L50x50x 4 Weight of Built up 3 (kgs):
5.00 …… L63x63x 5 Weight of Built up 4 (kgs):
6.00 …… L75x75x 6 Weight of Built up 5 (kgs):
8.00 …… L90x90x 8 Weight of Built up 6 (kgs):
10.00 …… L120x120x10 Weight of Built up 7 (kgs):
14.00 L100x100x10 Weight of Built up 8 (kgs):
16.00 …… L100x100x11 Weight of DSW (kgs):
20.00 …… Tube 150x150x4.5 Weight of CR (kgs):
Total(Kg) 0 0.00 0.00 Weight of SP1 (kgs):
STEEL FACE Weight of SP2 (kgs):
BUILT UP (M2) 0 HR(M2) 0 Weight of HR1 (kgs):
Weight of HR2 (kgs):
Weight of HR3 (kgs):
Weight of HR4 (kgs):
Weight of roof sheeting (kgs):
Weight of wall sheeting (kgs):
Weight of decking (kgs):
Weight of cold form (kgs):
Weight of Non-Discountable(kgs):

Note:

QF-DES-07/02 (8/12/2016)
 4 Roof slope:
30 1.0/10
0.3 Wind Speed (kM/Hr) :280
Enclosure condition:
B Enclosed

628
35,182
56.02

7 8 9
Weight Weight
Unit
Piece (kg) (Kg)

Kg 7952
12.98 Kg 818
Kg 400

5.13 Kg 1914
5.68 Kg 424

4.29 Kg 755
4.29 Kg 866

6.78 Kg 11545

4.71 Kg 2945
4.71 Kg 879
4.71 Kg 345

4.29 Kg 3504
4.29 Kg 28

6.12 Kg 303
4.29 Kg 35
4.71 Kg 135
32,848

QF-DES-07/02 (8/12/2016)
 7 8 9
Weight Weight
Unit
Piece (kg) Total (kg)

7 8 9
Weight Weight
Unit
Piece (kg) Total (kg)

Kg 297
Kg 132
2.20 Kg 44
26.00 Set
1.30 Kg 329
1.30 Kg 98
1.30 Kg 43
0.00 No.

2.50 Kg 557
2.00 Kg 584
583.64 M
4.10 Kg 251
40.80 M
661.13 M2

3.75 M2
2,334

up (kgs): BU 7,952
up 1 (kgs): BU1 0
up 2 (kgs): BU2 0
up 3 (kgs): BU3 0
up 4 (kgs): BU4 0
up 5 (kgs): BU5 0
up 6 (kgs): BU6 0
up 7 (kgs): BU7 0
up 8 (kgs): BU8 0
(kgs): DSW 0
kgs): CR 0
(kgs): SP1 0
(kgs): SP2 0
(kgs): HR1 0
(kgs): HR2 818
(kgs): HR3 0
(kgs): HR4 0
sheeting (kgs): RS 3,080
sheeting (kgs): WS 1,224
ing (kgs): PD 0
form (kgs): CF 19,774
Discountable(kgs): Other 2,334
Total 35,182

QF-DES-07/02 (8/12/2016)
 [Link]: QF-DES-07/02
ENGINEERING
Page 01 of 01
Issue Date : 0 08-12-2016
COMPLEXITY CHART
This form is a checklist sheet used to identify the complexity of a job

Quote No : Q230067/21 Entry Date : Job Name :

Rev. No : 00 Rev. Date : Bldg. Name :
Bldg No. : 1 Area No : Bldg. W.T :
Bldg Size : See PIF
COMPLEXITY MULTIPLE BUILDING
Item COMPLEXITY DESCRIPTION
FACTOR CONDITIONS COMPLEXITY
Doom, stadium, special shape building
1 Doom, sân vận động, tòa nhà hình dạng đặc biệt X 0

2 Chiều rộng nhịp mo-dun 1.5 1 1.5

Additional Roof Concentrated Loads - Non Moving
3 Tải trọng tập trung bổ sung trên mái- Không di chuyển 0.2 1 0.2

Tải trọng động đất cho tòa nhà 1 tầng

4 Tải trọng động đất từ 2 tầng trở lên 0.4 1 0.4
Special Design Code (Other than IBC,MBMA )
5 Mã thiế kế đặc biệt 0.6 0 0
Follow Customer Specifications
6 Tuân theo thông số kỹ thuật của khách hàng 0.4 0 0
Clip for Purlin/ Girt
7 Cái kẹp (nẹp) cho xà gồ mái / xà gồ vách 0 1 0
Fixed Base Columns
8 Cột liên kết ngàm 0.4 0 0
Single slope building
9 Nhà mái đơn 0.3 0 0
10 Unsymmetrical Frames ( Offset Rigde, Base Displacement, etc) - Bất đối xứng 0.3 1 0.3
11 0.1 1 0.1
12 0.3 1 0.3
13 0.5 1 0.5
14 Roof extension / Canopy with width Less than 4M (add 1 per type) 0.4 1 0.4
15 Roof extension / Canopy with width grearter than 4M (add 1 per type) 0.5 0 0
16 Rolled up door/ Slide Door (Multiply by [Link] Different Sizes) 0.2 0 0
17 Lean-to w/Main Building (Multiply by [Link] Different Sizes) 0.4 1 0.4
18 Gable Sheeting Only - Bao che đầu hồi 0.3 1 0.3
19 Horizontal panel- Bảng ngang 0.6 1 0.6
20 0.3 0 0
21 0.2 0 0
22 0.3 0 0
23 Longitudinal Expansion Joint - Khớp nối mở rộng theo chiều dọc 0.3 1 0.3
24 Partitions (Multiply by No. of Different Sizes) - Ngăn vách 0.3 1 0.3
25 Jack Beams, Jack Portal - Dầm chính, Dầm phụ 1 1 1
26 Soldier Column - Cột không có kèo nằm giữa 2 khung chính 0.5 1 0.5
Roof Drops/Special Framing (Multiply by No. of Different Sizes)
27 Mái giọt nước/ Khung đặc biệt 0.8 0 0
Mezzanine-Design and Supply (Double if More than Two)
28 Sàn-thiết kế và cung cấp 1.1 0 0
Mezzanine have many holes for machines
29 Sàn có nhiều khoảng trống cho máy móc 1 1 1
Pipe Rack/Catwalk/Roof platform (Double if More than Two)
30 Giá đỡ ống/Đường đi ống/Bề dày dưới mái 0.5 1 0.5
31 Staircase - Cầu thang 1 1 1
Non standard cage ladder (having landing)
32 Thang lồng không tiêu chuẩn ( có chiếu nghỉ) 1 1 1
33 Jib Cranes (Double if More than One Size) - Cần Cẩu 1 1 1
Monorails/Underhung Cranes (Double if More than Two)
34 Cần cẩu 1 đường ray/ chạy dưới đường ray 0.6 1 0.6
35 Other Cranes (Double if More than Two) 0.7 0 0
36 "A" Frames/Truss Girder /Open Web Joist/Box Column (Multiply by No. of Different Sizes) 1 0 0
37 Multiple sidewall Bay Spacing 0.5 1 0.5
38 Endwalls that have different Bay Spacing 0.5 1 0.5
39 Roof Framed Openings, Dormers, Cupola's (per each) 0.2 0 0
Hipped Buildings with Valley's (each [Link])
40 Tòa nhà có mái che với máng xối 1 1 1
Skewed Walls ( for each skewed wall)
41 Tường lệch 1 1 1
T-Hangers, Bi-Fold, Sliding Door type Buildings
42 Cửa : móc chữ T, gập lại, trượt 0.5 0 0
43 Potato, onion,Grain, etc. Storage Buildings - Nhà kho chứa nông sản 2 0 0
44 More than one typ. R.F (Multiply by No. of different frames -1) 0.5 0 0
45 Gable extensions 0.3 1 0.3
46 Additional complexity for Japanese customer & international consultant like Tebodin /Archetype/ royal haskoning e 2 1 2
47 Others (consult Design supervisor for deciding complexity factor for non-std case) 0 0 0
Sub Total: 17.5
Complexity Category Scale
Quy mô loại phức tạp Complexity Category : Be
Ae 1.5 - 10
Be >10 AND <20
Ce >=20
De Building type like Doom, stadium, special shape building
 [Link]: QF-DES-07/02
MANUFACTURING
Page 01 of 01
Issue Date : 08-12-2016
COMPLEXITY CHART
This form is a checklist sheet used to identify the complexity of a job

Quote No : Q230067/21 Entry Date : Job Name :

Rev. No : 00 Rev. Date : Bldg. Name :
Bldg No. : 1 Area No : Bldg. W.T :
Bldg Size : See PIF
COMPLEXITY MULTIPLE
Item COMPLEXITY DESCRIPTION
FACTOR CONDITIONS
1 Doom, stadium, special shape building X 0
2 Module Span Width<=20m 3.5 1.00
3 Additional Roof Concentrated Loads - Non Moving 0.1 0
4 Seismic load for more than or equal 2 storey building 0.4 1.00
5 Special Design Code (Other than IBC,MBMA ) 0.6 0
6 Follow Customer Specifications 0.4 0
7 Clip for Purlin/ Girt 0.6 1.00
8 Fixed Base Columns 0.4 0
9 Single slope building 0.0 0
10 Unsymmetrical Frames ( Offset Rigde, Base Displacement, etc) 0.3 1.00
11 Cable, Rod Bracing 0.8 0.00
12 Standard Ridge Vent(RV 1.5, RV 3.0, RV 5.0, RV 7.0) 2.3 0.00
13 Standard Fascia / Parapet (Multiply by No. of Different Sizes) (height ≤ 2m) 5.0 0.00
14 Roof extension / Canopy(Multiply by [Link] Different Sizes) 6.0 0.00
15 Rolled up door/ Slide Door (Multiply by [Link] Different Sizes) 0.3 0
16 Lean-to w/Main Building (Multiply by [Link] Different Sizes) 3.5 0.00
17 Gable Sheeting Only 1.0 0
18 Horizontal panel 0.6 0
19 Roof OR Wall Transition 0.5 0
20 Liner Panel on Wall or Roof 0.5 0
21 Valley Gutter 0.5 0
22 Longitudinal Expansion Joint 1.0 0
23 Partitions (Multiply by No. of Different Sizes) 1.0 0.1
24 Jack Beams, Jack Portal 1.0 0.1
25 Soldier Column 0.3 0.1
26 Roof Drops/Special Framing (Multiply by No. of Different Sizes) 2.4 0
27 Mezzanine-Design and Supply (Double if More than Two) 2.2 0.00
28 Mezzanine have many holes for machines 0.5 1.00
29 Pipe Rack/Catwalk/Roof platform (Double if More than Two) 9.0 0.00
30 Staircase 6.0 0
31 Non standard cage ladder (having landing) 12.5 0
32 Jib Cranes (Double if More than One Size) 2.1 0.00
33 Monorails/Underhung Cranes (Double if More than Two) 2.1 0.00
34 Other Cranes (Double if More than Two) 2.1 0.00
35 "A" Frames/Truss Girder /Open Web Joist/Box Column (Multiply by No. of Different Sizes) 10.0 0
36 Multiple sidewall Bay Spacing 1.0 0.1
37 Endwalls that have different Bay Spacing 1.0 0.1
38 Roof Framed Openings, Dormers, Cupola's (per each) 8.0 0
39 Hipped Buildings with Valley's (each [Link]) 8.0 0.00
40 Skewed Walls ( for each skewed wall) 1.0 0.1
41 T-Hangers, Bi-Fold, Sliding Door type Buildings 5.0 0
42 Potato, onion,Grain, etc. Storage Buildings 2.0 0
43 More than one typ. R.F (Multiply by No. of different frames -1) 0.2 0.00
44 Gable extensions 1.0 0.1
45 Additional complexity for Japanese customer & international consultant like Tebodin /Archetype/ royal haskoning et 1.0 1
46 Others (consult Design supervisor for deciding complexity factor for non-std case) 0.0 0
Sub Total:
Complexity Cartegory Scale Complexity Category :
Af >0 AND <= 3
Bf >3 AND <=5
Cf >5
Df Building type like Doom, stadium, special shape building
sheet used to identify the complexity of a job

BUILDING
COMPLEXITY

3.5
0.0
0.4
0.0
0.0
0.6
0.0
0.0
0.3
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.1
0.1
0.0
0.0
0.0
0.5
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.1
0.1
0.0
0.0
0.1
0.0
0.0
0.0
0.1
1.0
0.0
6.9
Cf
 80
204 124