NAKODA ENGINEERS
TEST CERTIFICATE AS PER EN 10204 3.1
TC No.: 0700 Date: 18/06/2025
Customer: FLOWSERVE INDIA CONTROLS PRIVATE LIMITED Purchase order ref: 10124802 Date: 08/04/2025
Material Specification & Invoice/Delivery
year of edition ASTM A516-25 GR.70 chalan ref: NE/B/0700/25-26 Date: 18/06/2025
PART DETAILS
Item Code Size/Description No. of Plate no. Heat no. Mill supplier Mill TC reference
Plates
RETAINER PLATE 4" HRG955 01B0
A516GR.70
JINDAL STEEL & POWER
AR9563M-Y-4A7 121 G37187 0000260634
LIMITED
CHEMICAL ANALYSIS %
Specification value C S P Mn Si Cu Ni Cr Mo V Cb Ti CE
Minimum 0.000 0.000 0.000 0.790 0.130 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.000
Maximum 0.230 0.025 0.025 1.500 0.450 0.430 0.430 0.340 0.130 0.040 0.030 0.040 0.450
Mill TC value 0.141 0.001 0.002 1.490 0.300 0.006 0.016 0.021 0.002 0.001 0.015 0.012 0.390
Tested value 0.222 0.017 0.019 1.078 0.334 0.000 0.000 0.000 0.000 0.000 0.000 0.000 0.410
Chemical Test done at OMEGA INSPECTION & ANALYTICAL LABORATORY Lab TC ref: TC NO:OIAL/2024/11/01130 DATE:16.11.2024
MECHANICAL ANALYSIS
Yield Strength @ Impact at -50 Deg F
Specification value 0.2% offset method Tensile Strength Elongation in 2" RA Hardness (BHN) Min: 27 Joules Single specimen ; Avg : 27
Joules
Minimum 38 Ksi 70 Ksi 21% -
(260 Mpa) (485 Mpa)
Maximum - 90 Ksi - 233 BHN
(620 Mpa) 1 2 3 Average
Mill TC value 50.47 Ksi 78.03 Ksi 36% -
(348 Mpa) (538 Mpa)
82 88 94 88
Tested value 47 Ksi 79 Ksi 28% 160, 164, 157
(322 Mpa) (548 Mpa)
Mechanical Test done at OMEGA INSPECTION & ANALYTICAL Lab TC ref: TC NO:OIAL/2024/11/01130 DATE:16.11.2024
LABORATORY
Heat Treatment condition: Normalized at 900 to 920°C Cycle time: 1.4mins per mm thickness + 10minutes
NDE
Ultrasonic test conducted on Plates as per procedure: ASTM A578 LEVEL B and found to be satisfactory. No Recordable indications observed. Plates visually
inspected and found to be satisfactory. Free from Pitting marks and scales
Ultrasonic test conducted by: JINDAL STEEL & POWER LIMITED Certificate no. 0000260634
MARKING
The plates are marked as "A516 GR 70", "AR9563M-Y-4A7" (G37187/01B0).
The Material conforms to ASTM A516-25 Gr.70 , NACE MR0175-2021/ISO 15156-1:2020 and Flowserve Specification: 4A7 Rev.03.
We hereby certify that the items mentioned above have been Visually, Dimensionally Inspected, Tested and found to be in accordance with Specification requirements.
Supplier Quality (RAGUL.S) Approved by Supplier Quality Incharge (RAGUL.S) Customer/ TPI
