globalsales@[Link] I [Link].
tr
MBD350
Diesel Generator Set
Kva 350
STAND BY
Kw 280
Kva 320
PRIME
Kw 256
GENERATING SET ALTERNATOR DATA
Output Ratings PRIME STAND BY Make LEROY SOMER TAL 046G
400/230V-3 Phase, 50Hz/1500 rpm (kVA / kW) 320/256 350/280 Frequency / Voltage 50Hz, 230/400 Volt
Power Factor 0,8
Standby / Prime (kVA/kW) 350 / 280
No. of Bearings and Rotor Single Bearing
DIESEL ENGINE TECHNICAL DATA
Engine Make BAUDOUIN Insulation Class H
Engine Model 6M16G350/5^ Total Harmonic Content 2%
Governing Type Electronic Efficiency 89,20%
[Link] Cylinder 6 Ingress Protection IP23
Cylinder Arrangement In Line Overloading Capacity 110% for 1 hour.
Bore and Stroke (mm) 126 X 130 Connection Type Star
Displacement (Cubic Capacity in Liters) 9,726 Excitation System Self Excitation
Injection System Direct PMG excitation system is available as option.
Aspiration System Turbo A-A
Compression Ratio 14.5:1
Rotation Counter Clockwise
STANDARD REFERENCE CONDITIONS
Cooling System Water Cooled
Motor Devri (rpm) 1500 Output ratings are presented at 25°C air inlet temperature,
barometric pressure 100 kPa, relative humidity 30%.
This generating set is designed to operate at high ambient
Stand By Gross Engine Power (kW / Hp) 320 / 428,8 temperatures (up to 55°C), humidity (up to 99%) and higher
Fuel Consumption @ 50% Load (L/h) 34,3 altitudes. De-ration may apply, please consult your dealer for
@ 75% Load (L/h) 51,5 specific site ratings.
@ 100% Load (L/h) 68,6
Some of the specifications are not standard on all Genset models.
Total Coolant Capacity Including Radiator (L) 51,4
Exhaust Gas Temperature (C°) 640
Radiator Cooling Air Flow / min (m3/min) 377
Combustion Air Flow (m3/min) 75,4
Exhaust Gas Flow (m3/min) 64,8
Fuel Tank Capacity ( Open Type / Canopied) (L) 700
Manufacturer reserves the right to make changes in model, technical specifications, color,
equipment and accessories without prior notice.
1 Bursa Serbest Bölgesi Ata Mah. Gelincik Cad. No:9 16600 GEMLİK / BURSA TURKIYE
globalsales@[Link] I [Link]
"YOUR POWER PARTNER"
STANDARD SPECIFICATIONS
1. ENGINE :
BAUDOUIN four stroke heavy duty high performace industrial type diesel engine.
2. ENGINE FILTRATION SYSTEM :
* Air Filter, Fuel Filter, Full Flow Oil Filter. All filters have replaceable elements.
3. COOLING RADIATOR :
Radiator and cooling fan, complete with safety guards, designed to cool the engine at high ambient temperatures.
(consult your dealer for de-ration factors)
4. EXHAUST SYSTEM :
Heavy duty Industrial Exhaust Silencer
Silencer noise reduction level 22 (dB)
Maximum allowable back pressure 10.0 (kPa)
5. BUSBAR :
Alternator power output is connected busbar panel board.
6. YAKIT SİSTEMİ :
On Generating Sets up to 700 KVA, the baseframe design is in¬corporated with an integral fuel tank with a capacity of approx.
8 hours running at Full Load. The tank is supplied complete with fill cap breather, fuel feed and return lines to the Engine and drain plug.
7. ALTERNATOR :
7.1. INSULATION SYSTEM :
* The insulation system is Class H.
* All windings are impregnated in either a triple dip thermoset¬ting liquid, oil and acid resisting polyester varnish or vacuum pressure
impregnated with a special polyester resin.
* Heavy coat of antitracking varnish additional protection against moisture or condensation.
7.2. AUTOMATIC VOLTAGE REGULATOR (AVR) :
The fully sealed Automatic Voltage Regulator maintains the Vol¬tage Regulation at ±0.5%. Nominal adjustment by means of a trim pot
incorporated on the AVR.
7.3. MOTOR STARTING :
An overload capacity equivalent to 300% of the Full Load impedan¬ce at zero Power Factor can be sustained for 10 seconds, when
AREP option is fitted.
8. MOUNTING ARRANGEMENT :
8.1. BASEFRAME : The complete Generating Set is mounted as a whole on a heavy duty fabricated steel baseframe.
8.2. COUPLING : The Engine and Alternator directly coupled by means of an SAE flange. Engine flywheel is flexibly coupled to the Alternator rotor.
8.3. ANTI VIBRATION MOUNTING PADS : Anti-Vibration pads are affixed between the Engine / Alternator feet and the Baseframe thus ensuring
complete vibration isolati¬on of the rotating assembly.
8.4. SAFETY GUARDS : The Fan & Fan Drive along with the Battery Charging Alternator are Safety Guard protected for personnel protection.
9. FACTORY TESTS :
The Generating set is load tested before dispatch. All protective devices control functions and site load conditions are simulated.
The generator and it’s systems are checked before dispatch.
10. PACKING :
Custom packaging solutions from MASTERPOWER offer maxi¬mum protection for both your investment and the enviroment alike.
11. DOCUMENTATION :
Operation & Maintenance manual, Circuit wiring diagrams and Commissioning / Fault Finding instruction leaflets are accompanied with
the generator .
12. QUALITY STANDARDS :
The equipment meets the following standards: BS4999, BS5000, BS5514 IEC 60034, VDE0530, NEMA MG 1.22 and ISO 8528.
13. WARRANTY :
All of the Generating Sets are covered under a warranty policy for a period of 12 months or 1000 running hours which is come first.
Warranty of the equipment is in line with manufacturers warranty terms & conditions.
(Check warranty statement for more details, as it may vary for different countries)
In line with continuous product development, we reserve the right to change specifications without notice.
RATING DEFINITIONS
PRIME POWER STANDBY POWER
These ratings are applicable for supplying continuous electrical These ratings are applicable for supplying continuous electrical
power (at variable load) in lieu of commercially purchased power (at variable load) in the event of a utility power failure. No
power. 10% overload power is available for 1 hour in 12 hours overload is permitted on these ratings.
continuous operation.
Manufacturer reserves the right to make changes in model, technical specifications, color, Aydıntepe Mah. Alkan Sk. No:7/A TR-34947 Tuzla / İSTANBUL TURKİYE
equipment and accessories without prior notice.
2 Bursa Serbest Bölgesi Ata Mah. Gelincik Cad. No:9 16600 GEMLİK / BURSA TURKIYE
globalsales@[Link] I [Link]
"YOUR POWER PARTNER"
ADVANCED GENSET COTROLLERS
The Genset Control Unit is an Auto Start Control Module for single genset applications. It includes a backlit LCD display which clearly shows the status of the
engine all the times. This module can either be pro-grammed using the front panel or by using the AMF configuration suite PC software.
D500 - MK2 DATAKOM DSE 6620 DEEPSEA
METERING & ALARM INDICATORS COMMUNICATIONS
• Generator frequency • Ethernet , GSM-GPRS
• Underspeed, Overspeed • Internal GPRS modem (optional)
• Generator volts (L-L, L-N) • Embedded web server
• Generator current • Web monitoring, Web programming
• Engine oil pressure • GSM-SMS
• Engine coolant temperature • E-mail
• Fuel level (Warning or shutdown) - Optional • Modbus RS-485, Modbus TCP/IP
• Hours run counter • SNMP
• Battery volts • USB Host (optional)
• Fail to start/stop • USB Device
• Emergency stop • RS-485,
• Failed to reach loading voltage / frequency • RS-232 (optional)
• Charge fail • Micro SD card slot (optional)
• Loss of magnetic pick-up signal - Optional • J1939-CANBUS
Masterpower uses next generation genset control units like Datakom and Deepsea, combining multi-functionality and wide communication possibilities
together with a reliable and low cost design. These units complies and mostly exceeds world’s tightest safety, EMC, vibration and environmental
standards for the industrial category. Software features are complete with easy firmware upgrade process through USB port.
The Windows based PC software allows monitoring and programming through USB, RS-485, Ethernet and GPRS. The PC based Scada softwares allows
monitoring and control of an unlimited number of gensets from a single central location.
FUNCTIONALITIES :
AMF unit with uninterrupted transfer
ATS unit with uninterrupted transfer
Remote start controller
Manual start controller
Engine controller
Remote display & control unit
Waveform display of V & I
Harmonic analysis of V & I
CTs at genset or load side
Manufacturer reserves the right to make changes in model, technical specifications, color, equipment Aydıntepe Mah. Alkan Sk. No:7/A TR-34947 Tuzla / İSTANBUL TURKİYE
and accessories without prior notice.
3 Bursa Serbest Bölgesi Ata Mah. Gelincik Cad. No:9 16600 GEMLİK / BURSA TURKIYE
globalsales@[Link] I [Link]
"YOUR POWER PARTNER"
OPEN TYPE DIMENSIONS AND WEIGHT
Length (mm) 3300
Width (mm) 1500
Height (mm) 1950
Weight (Dry) (Kg) 3150
SOUNDPROOF TYPE DIMENSIONS AND WEIGHT
Length (mm) 4500
Width (mm) 1500
Height (mm) 2410
Weight (Dry) (Kg) 3804
OPTIONS
We offer a range of optional features and accessories to tailor our generating sets to meet your power needs.
OPTIONS ACCESSORIES
A variety of generating set control and synchron panels Genuine spare parts
Additional protection alarms and shutdowns Load banks
Water fuel seperator Auxiliary fuel tanks
Water jacket heater Manual & automatic transfer switches
Battery charger
Circuit Breaker 3 / 4 Poles
Distributed And Serviced By :
HEAD OFFICE : FACTORY :
MASTERPOWER JENERATOR SAN. VE TIC. A.S. MASTERPOWER JENERATOR SAN. VE TIC. A.S. BURSA SERBEST BÖLGE ŞUBESİ
Aydıntepe Mah. Alkan Sk. No:7/A TR-34947 Tuzla / İSTANBUL TURKİYE Bursa Serbest Bölgesi Ata Mah. Gelincik Cad. No:9 16600 GEMLİK / BURSA
Tel : +902164946484 Fax : +902164946485 TURKIYE
"AN INSPIRED DESIGN TO MEET YOUR NEEDS"
Manufacturer reserves the right to make changes in model, technical specifications, color,
equipment and accessories without prior notice.
4 Bursa Serbest Bölgesi Ata Mah. Gelincik Cad. No:9 16600 GEMLİK / BURSA TURKIYE
