Page | 1

AURORA II HEATPUMP –
SPLIT SYSTEM SETTINGS AND
MANUAL

How to set up your heat pump

• Understanding heat differently

• Basic display operation

• Setting your heat curve

• APP and WIFI connection

• APP operation

CONTACT US
Phone: 01252 268 669
Email: info@[Link]
Web: [Link]
 Page | 2

Contents RETHINKING HEAT

Steady Heat
Rethinking Heat .........................................................................................................................2 Changing from a boiler to a heat pump requires
a rethink in the way you heat your home.
Basic Operation ........................................................................................................................ 4
A boiler burns fossil fuels to super-heat cold
Setting Time and Temp ...................................................................................................... 5 water to ~80°C rapidly, to do this a boiler burns
at roughly 1,200°C. This results in a yo-yo effect
Setting Temperature Curves ......................................................................................... 6 between the boiler and your thermostat turning
ON/OFF the boiler to try to maintain the
APP Download ............................................................................................................................. 7 temperature you desire.

Connecting APP and Heat Pump ................................................................................ 8 A heat pump, in contrast, maintains a constant
flow and changes the water temperature in a
APP Linking Flow ....................................................................................................................... 9 much more controlled way, one degree at a
time. This maintains a constant temperature in
APP Functionality .................................................................................................................. 10 your home.

Continuous Circulation
In our system your home becomes a thermal
store. Our weather compensation technology
monitors a range of temperatures, only turning
Safety
the main heat pump ON when your selected
Heat pumps involve both electrical and water
heating curve is met.
connections. Please read our safety instructions before
operating any part of the system. The rest of the time our state of art Grundfos
water pump circulates water around your house.
This takes very little energy to run and ensures
you never need to think about your heating
when the weather changes.
 Page | 3

HEATING CURVES
Selecting your heating curve lies at the heart of
your home’s resting temperature. You get to
choose between 16 settings which determine the
water temperature at different outdoor
temperatures. These graphs can be seen below.

Heating – High Water Temperature - HH1-HH8

Ambient Temperature (°C)

Heating – Low Water Temperature HL1-HL8

Ambient Temperature (°C)

 Page | 4

1. BASIC OPERATION
1.1 Unlock / Lock

When the lock Press this button for 2 Press again for 2 sec.
symbol is displayed, sec. to switch on the to switch off the heat
hold the power key heat pump. pump
for 5 sec. to unlock
the control panel.
NOTE: After 60 seconds of no operation, the display will automatically lock.

1.2 Change Mode Settings

No. Symbol Mode
1 DHW
Underfloor
2
heating
3 + DHW & Cooling
4 + DHW & Heating
DHW &
5 +
Press this button Underfloor
to switch between 6 Cooling
the different 7 Heating
modes.

1.3 Split System Selected Mode

With a split system you should only ever select heating or
cooling modes.
 Page | 5

2. SETTING TEMP & TIME

2.1 Manual Setting of the Temperature
To manually adjust the water temperature, you can use the arrows as
shown below; however, the recommendation for efficiency is to set a
heating curve,

Press this button to Press this button to

decrease the increase the
temperature. temperature.

2.1 Setting the Time

Setting the time is essential for night/day mode switching, and time settings.

Press 1 sec. Press the “clock” Press the arrow Press this Press the “clock” Press the arrow keys
press this button again. The keys button again to button again. The to adjust the value
button to set hour portion will to adjust the set the minute time will and finish with the
the current flash. value minutes. flash. “clock” key.
clock time.
 Page | 6

3. Climate Temperature Curve Heating – High Water Temperature - HH1-HH8

3.1 Set Climate Temperature Curve

When the climate temperature curve function is enabled, one of eight curves can
be selected per mode. The climate curve setting is assigned to the mode it is in. A

Target Temperature
combination mode can be changed by pressing the " " button, after which
both the relevant mode symbol and the display flash.

(°C)
* Curve 4 is the standard curve, curve 8 is the most Eco-friendly curve

Press 1 sec. The set Hold this button Enter the

press this temperature will for 5 sec. desired
arrow key to flash. pressed temperature
Ambient Temperature (°C)
open the curve using the
temperature arrow keys
setting screen.
Heating – Low Water Temperature HL1-HL8

Target Temperature
(°C)
Press 1 sec. press the Example: Curve 1 has been
arrow key to set successfully set
another desired
temperature curve.

Ambient Temperature (°C)

 Page | 7

4. APP Download

• Search for the “Smart Life” app in the App Store (iOS) or Play Store
(Android) and download + install it.

• Users without an account can log in by clicking on the “Create new user”
function on the login page.

• Create a new account → Enter your mobile phone number or email

address → receive the verification code → enter the verification code →
enter your password in → tap finish.
Google Play Store
• After the registration has been completed, you can optionally set up a
family, so that rights for use and/or management can be granted.

* Instructions above based on application version 4.5.0 (ANDROID) and 4.5.3

(iOS).

Apple App Store

 Page | 8

5. Connecting APP To Heat Pump

5.1 Control Panel Connection 5.2 Manual Connection in APP Mode

In the unlocked state, press and hold the power The Wi-Fi symbol will flash In the unlocked state, press and hold the The Wi-Fi symbol will
key + the up key at the same time to enter power key + the down key at the same time flash
pairing mode. to enter pairing mode.

STEP 1 STEP 1 & 2 – same as above.

Open the “Smart Life” APP, log in the main screen, click the “+” icon on the top
right corner to add devices “Add Device”, on the left side select “Large Home
Appliances” and tap “Smart Heat Pump (WiFi)”.

STEP 2 STEP 3
Select Smart Heat Pump (Wi-Fi) and enter your Wi-Fi network details (it must be Select Smart Heat Pump (Wi-Fi) and enter your Wi-Fi network details (it must
the same as the Wi-Fi connection the phone/tablet is connected to). Click “Next” be the same as the Wi-Fi connection the phone/tablet is connected to).
Click “Next” and confirm that the correct Wi-Fi network has been selected.
and confirm that the correct Wi-Fi network has been selected. The Wi-Fi symbol
The Wi-Fi symbol in the display will then flash quickly. Tap on “Confirm that
in the display will then flash quickly. Tap on “Confirm that the Wi-Fi symbol is
the Wi-Fi symbol is flashing. Click on the “+” icon to add the heat pump.
flashing. Click on the “+” icon to add the heat pump. Note: The icon flashes slowly
Note: The icon flashes slowly when the Wi-Fi module is connected to the Wi-
when the Wi-Fi module is connected to the Wi-Fi hotspot.
Fi hotspot.
STEP 3 STEP 4
The system will indicate “Device successfully added” and then it will be If the connection fails, manually re-enter the APP network configuration
connected to the Wi-Fi network. Click the icon in the APP to change device name, mode and repeat the previous steps to reconnect.
then select the installation location of the device (living room, bedroom). Tap
Finish to view the heat pump settings and data.
 Page | 9

6. APP Linking Flow

2.5 GHz to 5 GHz Troubleshooting

If you are having trouble connecting to the WIFI please check your internet connection is set to 2.4 GHz and not 5 GHz. 5 GHz can be disabled in your administrator settings
on your home internet admin page. After the heat pump is connected you can re-enable 5 GHz frequency.
 Page | 10

7. APP Functionality
5.1 ON/OFF 5.3 Settings

5.2 Selection of Heating or Cooling Mode 5.4 Heating Curve

Page | 11