Key Programming Course for Technicians
Uploaded by
ScribdTranslationsKey Programming Course for Technicians
Uploaded by
ScribdTranslationsKEY PROGRAMMING COURSE, IMMOBILIZERS, CONTROLS
REMOTE KEYS, MECHANICAL KEY AND ELECTRONIC CARD IN PEUGEOT
RENAULT AND TOYOTA. MODULE 2
PROPOSAL
Cars that include an immobilizer system increasingly require technicians who are trained.
for the correct diagnosis and solution of problems that depend on this technology, but only
they will obtain it with the training JM Locksmiths in conjunction with MCE Training
Automotriz offers you the opportunity to train in these technologies, which
it will result in benefits for you and your clients as it will allow you to provide them with a solution to their problems
Technicians and this will be reflected in your Economy and Personal Growth.
COURSE OBJECTIVE
The participant will get to know the technology that operates in each of these brands, delving into
disarmament of electronic modules where the memory or micro-controller is located for the
obtaining the Code in the same way, you will learn the disassembly of some boards to identify
the immobilizer when it is found, likewise acquires the ability for the mastery of the
code extractors, will begin with the knowledge of the software and hardware used in the
Locksmith for converting binary language to hexadecimal to locate the Pin Code for the
Transponder key programming.
At the end of the course, the assistant will understand the technology and will have the ability to detect failures.
involve the immobilizer system, as well as program keys with transponder and will be taken
Digital information that will help you generate successful jobs.
Remember with us your investment is guaranteed you already know our capacity and professionalism
in the teaching of courses.
WE OFFER COURSES ON:
KEY PROGRAMMING WITH CHIP || KEY CUTTING WORKSHOP || AUTOMOTIVE LOCKSMITH WORKSHOP ||
AUTOMOTIVE ELECTRONICS || AUTOMOTIVE ELECTRICITY || MODULE PROGRAMMING AND MORE ...
CARR. MEX-PACHUCA KM. 29 LOCAL 3 ECATEPEC EDO. DE MEXICO C. P 55066
TEL. 01(55) 5931 7268 NEXTEL. 01(55) 1988 0191 ID 52*25502*1 CEL. 5534 0310 10
mcecursos@[Link] [Link]
TOPIC
1.-Presentation of the Instructor and the Participants.
2.-Feedback from the Technology with Transponder.
3.-Knowing the Technology in Peugeot, Operation of Parts and Components.
4.- Getting to Know Technology at Renault, Operation of Parts and Components.
5.-Knowing the Technology in Toyota, Operation Parts and Components.
6.-Knowing Hollow Keys, Original Keys, Keys with Electronic Head and
Card.
7.-Knowing different ways to obtain the Pin Code for
Programming.
8.- Knowing the Quick Guide for Key and Card Programming
Electronics.
9.-Tips for Successful Programming.
10.- Getting to know other programming teams for these brands.
11.-Knowing parts where the Immobilizer (ECU BCM) is located
BOARD).
12.- Learning Desoldering and Soldering Techniques, as well as care with the
temperature in tablets with memories and microcontrollers.
13.-Knowing the different types of Memories and Microcontrollers.
14.-Programming Practices with Simulators.
15.- Practices for Extracting Codes in ECUs, DASHBOARDS, BCM etc.
16.- Meeting UPA ORANGE WELLEM Memory Programmers
17.- Code Extraction in Astra, Zafira, Chevy, Jetta, Pointer, Chrysler type 1,
Attitude, Platina, Aprio, Clio, Renault Kangoo, Megane II Ecu Sagem, Peugeot for
BSI and more....
18.-Feedback on Module 1 of Programming, Questions and Comments.
19.-Topics, Questions, and Delivery of Recognitions.
IMPORTANT DETAILS
The course is taught in 20 hours (over four days).
Cost of $3,000.00, reserve your spot with 50%, call to provide you with the number of
account for deposit.
The assistant will carry a USB drive for the delivery of the Digital Folders.
The practices are real in simulators and in cars.
One Brand per day Peugeot, Renault and Toyota the last day Memories, Programmers and
Microcontrollers, Technologies and Practices of Soldering and Desoldering.
Atentamente
The General Directorate of MCE
WE OFFER COURSES ON:
CHIP KEY PROGRAMMING || KEY CUTTING WORKSHOP || AUTOMOTIVE PUNCH WORKSHOP ||
AUTOMOTIVE ELECTRONICS || AUTOMOTIVE ELECTRICITY || MODULE PROGRAMMING AND MORE ...
CARR. MEX-PACHUCA KM. 29 LOCAL 3 ECATEPEC STATE OF MEXICO C. P 55066
TEL. 01(55) 5931 7268 NEXTEL. 01(55) 1988 0191 ID 52*25502*1 CEL. 5534 0310 10
mcecursos@[Link] [Link]
