X360Key User Manual: Setup Guide
Uploaded by
ScribdTranslationsX360Key User Manual: Setup Guide
Uploaded by
ScribdTranslationsX360Key User Manual
We need the file "[Link]" (key) from our reader, which
we will directly copy to the root of the micro sd of our X360 Key,
renaming it to "[Link]" if our console is Xbox360 Fat or
leaving it in "[Link]" if we have an Xbox Slim.
NOTE: If we encounter the error E64 when starting the console, we need to spoof.
our [Link] with the corresponding stock firmware for the model of our
reader
We connect the outgoing data strip from our console to the USB Dongle.
blue part of the strap towards the female of the USB.
Next, we plug the USB Dongle into our Xbox in one of the
enabled ports.
We will download the firmware '01.06' of the X360Key and we will only use it.
file "[Link]", we will edit it and look for the option
“MENUISO=N” and we will change it to “MENUISO=Y”. This single file will
we will introduce it into a pendrive which we will connect to the USB dongle before
turn on the console. We turn on the console and observe that the pendrive
blinks until its light becomes stable, an indication that the file has been
updated and we proceed to shut down our console.
PREPARING OUR HARD DRIVE
To do this, we proceed to format it in NTFS and create a folder.
games (in lowercase). Inside this folder we will introduce all the
games in *.iso format (e.g.: [Link]). We add the [Link]
corresponding to our dashboard to be able to play XGD3 games.
We turn on the console and connect the hard drive that contains the games.
[Link]
NOTE: It is not recommended to turn on the console with the hard drive connected, as
it can cause damage to the X360Key or to the console itself.
We open the tray, which will not physically open and we will see the
message 'close tray', we close the tray and then
They will show the messages 'closing' - 'reading' and if everything goes correctly
it will appear 'disc with mixed content' indicating that everything is progressing with
normality.
Finally, to load the game image we will access the Library of
Images / Current Disk and on the right a folder will appear with the
hard drive name, we highlight and press A. Subsequently we
mostrará la carpeta “games” que creamos inicialmente en nuestro Disco
hard and inside another folder will appear (we keep opening until
aparecezca la lista de juegos) o directamente los juegos con iconos en blanco
or with the cover that we assigned to the game.
We select the game and press A and it will show us the cover or the image.
blank (if we haven't added an image to our hard drive), in that
moment we press the button to open the tray of the console and it will return us
in the image library (where Current Disc is shown), we will press B
y nos devolverá al dashboard.
If we have the auto-start option enabled, the game will start.
automatically, otherwise it will appear to us as if it were a DVD
normal and we will execute it manually.
PREPARING COVERS
If we want to add the covers to the games, we have to add them in the folder.
"games" the image we want to use with the same name as the game's iso
but with the .jpg extension, that is, for the game '[Link]' it is assigned
the image corresponds to "[Link]."
LINK TO NECESSARY FILES
[Link]
