MSRF0059

30/01/2006
Brand: BRASTEMP
Model: BRM35AB
Subject: Launch of Frost Free Refrigerator

We inform you that starting from February 2006, we will begin the commercialization of
Frost Free Refrigerator Brastemp BRM35AB, produced in Joinville.
Derived from the BRM32A (which is no longer produced), this model is characterized by having
external handle on the doors, glass shelves, freezer temperature control with two
levels (normal and maximum) on the central console and damper in the refrigerator.

1. SPECIFICATION

1.1. Product identification

B R M 35 A B A NA where:

Marca:B= Brastemp
Linha/Família:R= Refrigerador Elétrico
Características:M= 2 portas em chapa
metallic, Frost Free
Volume:35= 350 litros (comercial)
Version: A= 1st version
Color: B= Branco
Tension: A= 127V
B= 220V
Market: NA = National
1.2. General Specifications
Heart Volume (litros) Weight (kg) Dimension (mm)
Refrigerator 260 Altura 1700
White Freezer 59 Unpacked 77 Width 620
Total 319 Depth 710

1.3. Technical Specifications

Tensão Nominal (V) 127 220
Permissible Oscillation (V) 104 to 140 198 to 242
Frequency (Hz) 60
Nominal Current (A) 2.1 0.9
Power (W) 131 126
Average Consumption (kWh/month) 48.0
Energy consumption classification Class B
Automatic Voltage Stabilizer 1000
Circuit Breaker Key (A) 10
Refrigerant gas R134a charge (± 5g) 90
High Pressure (Kpa) 1600
Low Pressure (KPa) 360
Freezing capacity (kg/24h) 4
EMBRACO Compressor EGY80HLP

1.4. Maximum weight on components (kg)

Quick Freezing Compartment 7.5
Freezer Door Shelves 5
Extra cold compartment 8
Glass shelves (each) 20
Vegetable Drawer Lid 20
Vegetable Drawer 15
Upper Shelf 2.5
Egg holder shelf 2.5
Intermediate Shelf (each) 5
Bottle Shelf 8

1.5. Warranty
The BRM35AB has a 1-year warranty against manufacturing defects.
Plastic, glass, and removable parts have a legal warranty of 90 days, as described in the
warranty term in the consumer manual that accompanies the product.

1.6. Embalagem
The product uses the 'shrink' packaging concept, utilizing a top, base, and sides made of Styrofoam.
(EPS) and shrinkable plastic bag.

1.7. Embedding
The minimum dimensions for embedding are:
10 cm on the sides and at the bottom (back);
- 15 cm at the top.

Page 2 MSRF0059 - Launch of Frost Free Refrigerator BRM35AB

2. AESTHETIC CHARACTERISTICS

2 12

3 13

4 14

5
15

6 16

7 15

8 16

9 17

10

11

18

Freezing compartment 10. Drawer Humidity Control

fast Legumes
Ice molds (2) 11. Vegetable Drawer
3. Freezer Temperature Control Freezer Door Shelf
4. Extra-cold Compartment Egg Holder
5. Wind Flow System 14. Upper Shelf
6. Refrigerator Temperature Control 15. Intermediate Shelf (2)
7. Lamp Bottle Separator (2)
8. Glass Shelf (3) Shelf Bottles
9. Vegetable Drawer Lid 18. Stabilizing Feet

Page 3 MSRF0059 - Launch of Frost Free Refrigerator BRM35AB

3. FUNCTIONAL CHARACTERISTICS

3.1. Lamp drive system

There is a 15 Watt bulb in the refrigerator (there is no bulb in the freezer) and its
The activation is through a switch located at the bottom of the crossbar console.
intermediate.

3.2. Electronic control system of the product

The product operates through an electronic control system that executes the various
functions. This electronic control system consists of the following items:
Power Module;
Temperature Sensor
Temperature selection switch (of the freezer).

The characteristics of the control system are described below:

Power Module
It is located at the back of the product inside a plastic box near the compressor.
Sua função é ligar/desligar o compressor e a resistência de degelo de acordo com a necessidade
(terms of use). The connection of the power module to the electrical network and power cable is
made through a connector, with a fit that does not allow for error.

Temperature Sensor
It is located in the freezer compartment near the evaporator. The sensor is responsible for
send signals to the power module, according to the internal temperature of the freezer, and it is
connected to the power board through the internal wiring in the cabinet.

Freezer temperature selection switch

Send the temperature range selection signal to the power module of the freezer.
(freezing) at two levels (normal and maximum). The switch is located on the console.

The various functions performed by the electronic system are as follows:

3.2.1. Temperature Control

The temperature inside the product depends on the amount of food stored and the
frequency of door openings. The temperature sensor that is responsible for monitoring the
freezer internal temperature, sends a signal to the power module whenever the
temperature in the freezer exceeds the selected temperature range, then the module of
power will turn on the compressor. When the sensor detects a temperature value lower than that of
selected band, the power module will turn off the compressor.

Temperature Range League temperature Shut-off temperature

MINIMUM - 15 ºC - 22 ºC
MAXIMUM - 18 ºC - 25 ºC

OBSERVATIONS
1) The product control system has a protection that only allows the compressor
be connected after 7 minutes have elapsed since your last deactivation. This prevents the
compressor tries to start while the system pressures have not yet equalized.
The temperature value is measured near the sensor and not in the center of the compartment.
freezer.

Page 4 MSRF0059 - Launch of Frost Free Refrigerator BRM35AB

3.2.2. Temperature in the refrigerator
In the refrigerator, the temperatures are controlled by the thermostatic damper that regulates the flow of
it is cold, yet it does not trigger or emit any signal for the module to activate or not
compressor; working independently, that is, it only opens or closes the passage of cold air
from the freezer to the refrigerator, increasing or decreasing the airflow, controlling it this way.
way, the temperature according to the selected graduation. See the table below for the temperatures:
Local Minimum Medium Maximum
Glass shelves 7 to 9ºC 4 a 6ºC -1 to 1°C
Vegetable drawer 13 a 15ºC 10 to 12ºC 7 a 9ºC

3.2.3. Operation of the fan

The fan operates independently of the compressor and is managed by the control system.
electronic as follows:
When the compressor turns on, the fan turns on after 15 seconds.
When the compressor turns off, the fan turns off after 50 seconds.
After a defrost, the Compressor restarts after 3 minutes and the fan restarts after 3 minutes.
of the Compressor operation.
The fan turns off every time the refrigerator door is opened.
The fan is fixed to the rear cover of the evaporator by a screw and is responsible for
forced air circulation inside the product.

3.2.4. Port management

Whenever the refrigerator door is opened, the following occurs:
It turns on the refrigerator light.
Turn off the fan motor.
When the refrigerator door remains open for 6 minutes, the electronic control system
turn off the lamp and turn on the fan motor (if the compressor is on). From there the
the product starts to cycle normally, even with the door open. When closing the refrigerator door
o sistema eletrônico volta a controlar o acionamento do ventilador.

OBSERVATIONS
The freezer door when opened will not turn off the fan.
because there is no activation switch in the freezer section.

3.2.5. Selection of the freezing level of the Freezer

Pressing the "FREEZER" button selects the freezing range (normal or maximum) of the
Freezer. When the button is not pressed, it indicates the normal freezing level; when
pressed, indicates the maximum level of freezing.

3.2.6. Defrosting System

The product has a defrosting system composed of the following components:
180 Watt defrost resistance,
Defrost thermostat / bimetal, opens at 15°C / closes at -6°C;
Drip tray;
Evaporation container (on the compressor).

OBSERVATIONS
The resistance is fixed to the defrost tray with aluminum tape to prevent ice formation in the area.
the bimetal is secured with a plastic strap to prevent it from coming loose during any movement.

Page 5 MSRF0059 - Launch of Frost Free Refrigerator BRM35AB

The defrost thermostat/bimetal will turn off the defrost heater as soon as the existing ice on
the evaporator has melted. The defrost heater, in turn, being surrounded by the entire
the evaporator extension thaws it more quickly.
We can call this melting system "intelligent", as it works as follows: The
the first defrost occurs after 7 hours of compressor operation, when then, this and the
The fan motors are turned off and the heater is activated. The standard time considered for
the duration of the thawing is 18 minutes. Depending on the consumer's usage habits, conditions
climatic factors etc., the amount of ice formed, as well as the duration of thawing, may
vary. Then, the product's electronic control system monitors the defrosting time and sets the
time needed for the next thaw to happen. Thus, under normal operation, the
The time between thaws is defined by the duration of the previous thaw. Given that between 2
the maximum thawing time is 24 hours. After the defrost / bimetal thermostat turns off the
resistance, the compressor takes 3 minutes to restart. This time is necessary for all
the melting water drains. After the compressor starts, the fan still waits for another 3 minutes
to start operation.
Problems that can occur during thawing: The duration of thawing SHOULD NEVER
it may exceed 40 minutes. If after 40 minutes the defrost thermostat STILL hasn't turned off the
resistance, the electronic control system does it. However, it considers this situation as a
"failure". If this "failure" repeats in 3 consecutive defrosts, the product disables the defrost function.
and raises the freezer temperature to a range of -5 to 0°C, alerting the consumer that the
the product is not functioning normally and you should call the Authorized Service. The product
it will only get out of this situation if it is unplugged. This means that there is some
problem with the components involved in defrosting (resistance, defrost thermostat, etc.), or
so from the electronic control system itself.
Similarly, if in 3 consecutive thaws, the duration of the thaw is less than 8
minutes, the electronic system will also interpret this as a "failure" and alert the consumer.
as described above.

3.3. Refrigerant fluid

The product uses R134a as a refrigerant fluid in its hermetic system. This gas is of the type
HFC (Hydrofluorocarbon), harmless to the ozone layer. In the polyurethane insulation of
In the cabinet, R141b is used. Similar to R134a, it also does not harm the ozone layer.

IMPORTANT
Only trained technicians in the reoperation of Sealed Units with HFC are authorized to
carry out maintenance on the product. Remember that the maintenance equipment and some
parts are exclusive for this type of refrigerant gas

3.4. Cabinet
The cabinet has an internal tube for heating the flange and sides, to avoid sweating.
in places where the relative humidity of the air is very high. In addition, there is a return duct
10 Watt resistance to prevent possible freezing in this region. This resistance comes from
factory linked. Therefore, the enclosure for the 220V product has a different code from the enclosure for
product 127V.

IMPORTANT
The electrical connectors of the defrost thermostat / bimetal, defrost heater and heater
The ducts are similar. Before disconnecting them, pay attention to the correct position of
assembly. If you have any questions, consult the electrical diagram.

Page 6 MSRF0059 - Launch of Frost Free Refrigerator BRM35AB

3.5. Injected suction line in the Cabinet
The suction line is injected into the cabinet and is not replaceable. Its connection to the evaporator is
through Lockring rings (see BTRF0010 of 08/07/2001).

3.6. Evaporator
The evaporator is sold for replacement. When it is necessary to replace the evaporator, it should be
use Lockring connection (see BTRF0010 from 08/07/2001).

3.7. Compressor
The product is assembled with the EMBRACO compressor model EGY80HLP prepared to operate.
only with R134a gas. It should only be replaced with one of the same type.

3.8. Capacitor
Along with the Compressor, a phase Capacitor is connected to improve the
compressor efficiency and improve product consumption. 127V products use Capacitor of
15uF and 220V products use a 5uF capacitor.
Descarregue o Capacitor ANTES de testá-lo (com duas chaves de fenda, provoque um curto).
Disconnect it from the circuit and check the continuity with a multimeter on the X10k scale; the pointer will
it will move to the end of the scale (tending to zero) and will return. If the pointer does not move
If you stay at the end of the scale, change the Capacitor.

3.9. Relay / Protector Set

The relay and/or the thermal protector of the compressor must be replaced together and only by
of the same kind.

3.10. Refrigerant gas filter

Due to working with refrigerant gas R134a, the gas filter uses a larger amount of element.
secant of what the filters used in products that operate with gas R12. Therefore, to
replace the gas filter, always use the one specified for this model.

3.11. Doors, Handles and Seals

The freezer and refrigerator doors have polyurethane insulation and are injected in
together with the door panel. The handles are screwed on and replaceable. The gasket is not.
injected together with the panel and door and not screwed, can be replaced very
ease. The fastening is such that the gasket is housed in an existing groove on the panel of
door. The doors do not come with their gaskets and are sold separately.

3.12. Bushing and Click Bushing

The freezer door uses a clicking stop bushing at the bottom to assist in closing.
door, locking its flap on the hinge when the door is being closed. This type of bushing
prevents the door from being left ajar in cases where the consumer has not noticed.
that the door didn't close. The refrigerator door does not use a click bushing, but rather a butt bushing.

Page 7 MSRF0059 - Launch of Frost Free Refrigerator BRM35AB

3.13. Reversal of the opening direction of the doors
The product is assembled in the factory with the doors opening to the right (hinges and bushings)
located on the right side, when looking at the product from the front). To reverse the direction of opening
the door, the right (lower right of the freezer door) clicking hinge bushing, hinge bushing
right (bottom right of the refrigerator door), and the right middle hinge is not
reused on the left side and must be replaced, as per the table below:
DESCRIPTION RIGHT SIDE IN THE REVERSION REPLACE WITH
Screw bushing 326039809 326041457
Clicking stop bushing 326039813 326041456
Intermediate hinge 326039826 326041455

Note: if preferred, use the reversal kit code 326041460.

To reverse the door opening direction, proceed as follows:

1) Remove the cover from the upper hinge;
2) With the help of a medium screwdriver, remove the display from the console;
3) Disconnect the electrical connectors that are connected to the button switch.
freezing and on the light switch located on the console;
4) To remove the doors, use an 8mm socket wrench to unscrew the bolts that secure the
dobradiça superior, dobradiça inferior, dobradiça intermediária e complemento da dobradiça
intermediate;
5) Install the lower hinge on the left side;
6) Install the left intermediate hinge and assemble the refrigerator door;
7) Remove the plugs from the left side of the upper hinge and transfer them to the right side;
8) Install the upper hinge on the left side;
9) Install the left side door;
10) Install the intermediate hinge attachment on the right side;
11) Install the console and reattach the cover of the upper hinge.

OBSERVATIONS
The first reversal of the door opening direction is free within the warranty period.
of the product of one year;

The hinge shims are reused in door reversal.

3.14. Vacuum breaker valve

The product has a vacuum break valve, located behind the vegetable drawer, which has the
objective of easing the door opening force, due to the formation of vacuum inside the product.

3.15. Casters and leveling feet

The product comes equipped with wheels on the compressor base that facilitate its movement.
to facilitate the cleaning of the kitchen and two leveling feet at the front. Level the product so that
he is leaning backwards.

3.16. Control of humidity in the vegetable drawer:

It allows regulating the air flow into the vegetable drawer, according to the
necessity. It is advisable to keep the regulator closed for the preservation of leafy vegetables.
is open for fruit preservation.

Page 8 MSRF0059 - Launch of Frost Free Refrigerator BRM35AB

4. TEST ROUTINE OF THE ELECTRONIC BOARD AND COMPONENTS

4.1 - Automatic product testing routine

Whenever the product is plugged in, it automatically enters a testing routine.
that lasts about eight minutes. This routine will automatically test all the loads
(components), connecting and disconnecting them in a specific sequence.
During these eight minutes, it is advisable that the client does not try to select the functions of
product, as it will only operate normally after the completion of the automatic testing routine.
Inform that this is not a defect and guide the consumer to always plug the product in
wait ten minutes to select any of the functions.

4.2. - Product testing routine intended for the technician

In addition to the testing routine described above, the product's electronic control system has a
Another testing routine intended for the technician, which allows detecting in the field, the existence of
defective components in the product. This testing routine is carried out as follows:
1. With the doors closed, unplug the product and plug it back in.
2. Open and close the refrigerator door slowly four times (approximately ten)
open for seconds and closed for ten seconds.
3. Press the 'FREEZER' button (temperature selection) five times.
4. Open and close the refrigerator door again.
5. To verify if the product has entered the testing routine, open both doors simultaneously.
At this moment, you will notice that the Fan Motor will turn on automatically and the Lamp
The refrigerator will be off, as the testing routine has already started. If the fan does not
activate, we will have a failure in this component.

Note. Wait with the fan motor on for approximately three minutes for the system to
equalizar e o Compressor possa ser testado (para que consiga partir) nos próximos passos.
6. Press the "FREEZER" button, then it will turn off the Fan Motor.
7. Press the "FREEZER" button again, then the compressor will turn on.
Note. If the product does not have sufficient temperature to maintain the Defrost Thermostat
(Bimetal) "closed", keep the Compressor running for approximately five minutes (time
necessary for the Evaporator to freeze the Bimetal and for it to close), because only then
we will be able to test the Defrost Resistance of the Evaporator in the next step.
8. Press the 'FREEZER' button again, then the Compressor will turn off.
9. Press the "FREEZER" button again, it will then turn on the Defrost Heater of the Evaporator.
Observe the increase in electric current (A) in the circuit with an ammeter.
it should be connected to the Power Cable via the White or Black wire before the Module of
Power.
10. Press the "FREEZER" button again, then the Defrost Heater will turn off, where
we can observe the electric current (A) reaching almost 'zero' (there will be a small
feeding in the system).
11. By pressing the "FREEZER" button again, the product will return to the automatic test routine.
from the factory (the one that lasts eight minutes), and then normal operation begins with the
temperature range of the Freezer in the "medium" position which can then be adjusted
according to the consumer's needs.

Page 9 MSRF0059 - Release of Frost Free Refrigerator BRM35AB

General Observations in this Routine
1. For the product to understand that it wants to enter the testing routine, the operations of items 1,
2, 3, and 4 cannot exceed two minutes. If it exceeds, it will be necessary to restart the
operations since item 1.
The maximum allowed time between each of the operations from items 5 to 11 is six minutes.
since after this time the testing routine will automatically cancel and the routine will start
factory test that lasts around 8 minutes.

5. TOOLS NEEDED FOR MAINTENANCE

All product maintenance can be performed with the tools below:
Socket wrench set;
Torks key set;
Philips screwdriver set;
Screwdriver Set.

6. ELECTRICAL SCHEME

Page 10 MSRF0059 - Launch of Frost Free Refrigerator BRM35AB

7 - DEFECT CORRECTION FRAME
Defect correction framework to assist the ATTENDANTS in contacting the consumer:
Claimed Defect Verify Solution
If the power cable is
Connect it.
connected.
If not, guide the consumer to
There is power in the outlet.
call an electrician.
If the circuit breaker is tripped
Rewire the circuit breaker, or guide the
It doesn't work. the fuse of the house
consumer to call an electrician.
queimado.
Very low voltage
(this can be observed by Guide the consumer to install a
luminosity oscillation of 1000 Watt automatic stabilizer.
light bulbs.
Guide consumers to respect the
If the installation is correct
minimum embedding distances
(heat sources, sunlight,
10cm on the sides and back and 15cm in
stuffing, etc.)
top).
Does not Refrigerate /
If the Damper button is in Consumer Orientation. Very hot days,
Cools little in
proper position. set the Damper button to maximum.
refrigerator.
If there are utensils blocking the
Unclog and guide the consumer.
outlet of cold air.
If there was excessive opening
Guide the consumer.
of doors or open doors.
If the utensils are
placed directly at the exit Reposition them and guide the consumer.
Freezing in the It's cold air.
refrigerator. If the position of the button of Guide the consumer. Very cold days,
The damper is appropriate. set the Damper button to minimum.
If the Damper button is in the correct position and guide the
proper position. consumer.
Internal greeting in If they were stored
refrigerator. still warm foods,
Guide the consumer.
unpacked or
unstamped
If the ambient temperature
Guide the consumer that in these
is above 30°It's with the external greeting conditions are normal.
high relative humidity of the air.
Guide consumers to respect the
If the
minimum embedding distances
minimum distances for
External greeting. 10cm on the sides and back and 15cm in
stuffing.
top).
If there is a heat source (stove,
heaters), near the Guide the consumer to the source
product or direct incidence of heat should be removed or withdrawn.
sunlight.
If the product is unlevel. Level and guide the consumer.
Fan motor noise. Guide the consumer that it is normal.
Noise Compressor noise when turning on
Guide the consumer that it is normal.
turn off.
Noises during the thaw. Guide the consumer that it is normal.
If the utensils and parts
Difficulty in closing Position them correctly and guide them.
internals are positioned
the doors. consumer.
correctly.

Page 11 MSRF0059 - Launch of Frost Free Refrigerator BRM35AB

 Claimed Defect Verify Solution
If the product is clean Guide the consumer to clean with water
internally. Soap and neutral soap.
They were stored
Smell or bad taste still warm foods
Guide the consumer.
in the food. unpacked or
unstamped.
Clean internally with warm water and
Smell of new product.
neutral soap and guide the consumer.
Sister in the food moisture regulator Adjust the humidity regulator to the
vegetable drawer. drawer closed. more open position.
Formation of ice in Moisture infiltration through Check if there is any object blocking the
freezer. door. closing the door.
Guide the consumer that when the
the refrigerator door has been open for more than 6
Lamp of The refrigerator door is
the refrigerator turned off. minutes after the lamp turns off,
open for more than 6 minutes.
to return the system to normal
just close the door.
Freezer lamp There is no lamp in the part of guiding the consumer that in the part of
does not light up. freezer. there is no bulb in the freezer.
Normal. Guide the consumer to
The fan does not The door switch of the
open the refrigerator door the fan
it works when it opens refrigerator on / off
turn it off. But when you open the door of
the door. fan. the freezer or the fan does not turn off.

Page 12 MSRF0059 - Launch of Frost Free Refrigerator BRM35AB

Defect correction chart to assist the TECHNICIANS:
Claimed Defect Verify Solution
Internal greeting at If the doors are closing Level the product. Check the gasket.
refrigerator correctly. Check the adjustment of the hinges.
External greeting There is a seal of the gasket. Replace it.
Difficulty in closing
If the product is leveled. Rank the product and guide the consumer.
the doors.
Difficulty to open If the vacuum break valve is
Unblock and guide the consumer.
doors. blocked.
Check if there is any object blocking the
Ice formation on Moisture infiltration through
closing of the door. If the gasket is
freezer. gate.
if defective, replace it.
Replace it. If the problem persists, take the ...
tests with the light switch.
The lamp does not light up. The lamp is burnt out.
If the problem persists, change the
light switch
If there are utensils placed
Reposition them and guide the consumer.
directly in the cold air outlet.
If the position of the button of Guide the consumer. Very cold days,
The damper is suitable. set the Damper button to minimum.
Freezing Foods Damper operation (not
no Refrigerator it may be stuck in the
open position). Check if Test the opening/closing of the Damper.
there are no objects (screw, tape In case of a freeze, not caused by
adhesive, ice, others, etc. external objects, replace it.
externals influencing your
functioning
Power cable
Replace it.
damaged.
Damper operation (not
it may be locked). Check
Test the opening/closing of the Damper.
if there are no objects (screw,
In case of freezing, that is not due to
adhesive tape, ice, others, etc
Does Not Refrigerate external objects, replace it.
Doesn't Freeze
externals influencing your
functioning.
Leakage / Clogging of
(Cause - Various) Reprocess Sealed Unit.
Sealed Unit
If the Blower Duct does not
Unclog the Blower Duct.
is obstructed.
Fan Motor Voltage
it has to be the corresponding one
If it is not the corresponding to
to the product).
product, replace it.
Reposition the Fan Blade if
Motor Positioning
is scraping / getting stuck with the Cover
Fan.
rear.
Does not Refrigerate / The Bimetal should not be fallen over the
Does not freeze Evaporator is fixed next to the tube of
Thermostat Positioning
evaporator inlet (capillary side).
from Degelo (Bimetal).
Ice Block If you find him fallen, tie him up with
no(s) Dutos) plastic love code 031630100.
Frozen Drain Clogged. Unclog Drain
The Sealing of the Gaskets/ Align / Regular the Doors. In case Gasket
Doors. defective / deformed, replace it.

Page 13 MSRF0059 - Launch of Frost Free Refrigerator BRM35AB

 Claimed Defect Verify Solution
Execute self-test routine for
check if it is working
normally. If not, assess whether
The Thaw Resistance is not
disconnected or burned. If
if necessary, replace it.
Evaluate the Defrost Thermostat (Bimetal),
if this is defective, replace it.
Note:
Operation of the Resistance Temperature greater than 10°C:
of the Evaporator De-Icing. Open bimetal and
Ohmic resistance = infinity
Temperature less than -6°C:
Closed bimetal and
Does not refrigerate / Ohmic resistance = zero
Does not freeze
Evaluate all items mentioned as causes
of blockage. Finding everything with
Ice Block normal operation, replace the
no(s) Pipe(s) Power Module.
After evaluating the items of the Resistance of
If the Ice Formation begins- Evaporator defrosting and not finding
if in the inner part of the Duct of no failure, connect the Resistance of
Return. Return Duct (which is located behind
from Back Cover - see BT0336)
Position Defrost Resistance of
Contact of the Resistance from a way that it is in physical contact
Thawing with the Thawing Gutter. with the Thawing Gutter. If necessary,
fix with Aluminum Tape.
Position / Fit Resistance of
Check contact of the Resistance
of the Dehumidifier with the Evaporator. Melting in such a way that it is in
physical contact with the Evaporator.
Evaporator Fins NO
they may be crushed Straighten the fins manually.
mainly at the bottom.
Very low voltage
(this can be observed by Guide the consumer to install a
Don't Call
fluctuation of the brightness of the 1000 Watt automatic stabilizer.
lamps).

Prepared by Adriano A Costa

Reviewed by Moises S Leao

Page 14 MSRF0059 - Launch of Frost Free Refrigerator BRM35AB