IGN400 BIOS Manual

[Link]
Main Page 2

Advanced Page 5
Advanced Page > Boot Configuration 5
Advanced Page > SATA Configuration 5
Advanced Page > Chipset Configuration (Intel PTT) 6
Advanced Page > ACPI Table/Features Control 6
Advanced Page > CPU Configuration 8
Advanced Page > System Agent (SA) Configuration > Graphics Configuration 17
Advanced Page > PCH-IO Configuration > PCI Express Configuration 21
Advanced Page > PCH-IO Configuration > PCI Express Configuration > PCI
Express Root Port Settings 22
Advanced Page > PCH-IO Configuration > SATA and RST Configuration 23
Advanced Page > PCH-IO Configuration > HD Audio 25
Advanced Page > PCH-FW Configuration 26
Advanced Page > PCH-FW Configuration > AMT Configuration 29
Advanced Page > PCH-FW Configuration > ASF Support > CIRA Configuration 30
Advanced Page > PCH-FW Configuration > ASF Support > ASF Configuration 31
Advanced Page > PCH-FW Configuration > ASF Support > Secure Erase
Configuration 32
Advanced Page > PCH-FW Configuration > ASF Support > MEBx Resolution Settings
33
Advanced Page > PCH-FW Configuration > Firmware Update Configuration 34
Advanced Page > Thermal Configuration 34
Advanced Page > SIO NCT5524D 39
Advanced Page > SIO NCT5524D CHIP > UART Port X Configuration 40
Advanced Page > SIO NCT5524D CHIP > Fan Control (Manual) 41
Advanced Page > SIO NCT5524D CHIP > Fan Control (Thermal Cruise) 42
Advanced Page > SIO NCT5524D CHIP > Fan Control (Speed Cruise) 44
Advanced Page > SIO NCT5524D CHIP > Fan Control (Smart Fan IV) 46
Advanced Page > SIO NCT5524D CHIP > Hardware Monitor 49

Security Page 50

Boot Page 52

Exit Page 54

1
NOTE:​ to access the BIOS on IGN400, hold the ‘Delete’ key on your keyboard.

Main Page
InsydeH2O Version
Type Information

Found on BIOS Page Main Page

Description Displays current InsydeH2O version

BIOS Version
Type Information

Found on BIOS Page Main Page

Description Displays current BIOS version

Build Date
Type Information

Found on BIOS Page Main Page

Description Displays the build date in MM/DD/YYYY

Processor Type
Type Information

Found on BIOS Page Main Page

Description Displays current processor

CPU Speed
Type Information

Found on BIOS Page Main Page

Description Displays CPU rated speed

2
Number of Processors
Type Information

Found on BIOS Page Main Page

Description Displays number of cores and threads

PCH SKU
Type Information

Found on BIOS Page Main Page

Description Displays PCH SKU

Total Memory
Type Information

Found on BIOS Page Main Page

Description Displays total memory installed in system

Channel A
Type Information

Found on BIOS Page Main Page

Description Displays memory installed in Channel A

Channel B
Type Information

Found on BIOS Page Main Page

Description Displays memory installed in Channel B

Memory Speed
Type Information

Found on BIOS Page Main Page

Description Displays clock speed of memory

3
Language
Type Information

Found on BIOS Page Main Page

Description Select the current default language used by the InsydeH2O

System Time
Type Information

Found on BIOS Page Main Page

Description Display the time in HH:MM:SS. Valid range is from 0 to 23, 0

to 59, 0 to 59. Use +/- to increase/reduce

System Date
Type Information

Found on BIOS Page Main Page

Description Display the date in MM:DD:YYYY. Valid range is from 1 to

12, 1 to 31, 2000 to 2099. Use +/- to increase/reduce

4
Advanced Page
Boot Configuration
Type Configurable Setting

Found on BIOS Page Advanced Page

Description Configures boot settings

Advanced Page > Boot Configuration

Numlock
Type Configurable Setting

Found on BIOS Page Advanced Page > Boot Configuration

Description Selects Power-on state for numlock. Possible values:

Off/On, default value: Off

SATA Configuration
Type Configurable Setting

Found on BIOS Page Advanced Page

Description Select the SATA controller and hard disk drive type installed
in your system

Advanced Page > SATA Configuration

SATA ATA Port X
Type Information

Found on BIOS Page Advanced Page > SATA Configuration

Description Displays SKU of device currently installed in SATA Port

5
Chipset Configuration (Intel PTT)
Type Configurable Setting

Found on BIOS Page Advanced Page

Description Advanced chipset configuration options

Advanced Page > Chipset Configuration (Intel PTT)

Platform Trust Technology
Type Information

Found on BIOS Page Advanced Page > Chipset Configuration (Intel PTT)

Description Enable/Disable Platform Trust Technology.

Default value: Enabled

ACPI Table/Features Control

Type Configurable Setting

Found on BIOS Page Advanced Page

Description Configure ACPI Table/Features settings

Advanced Page > ACPI Table/Features Control

Enable Hibernation
Type Configurable Setting

Found on BIOS Page Advanced Page > ACPI Table/Features Control

Description Enables or Disables system ability to hibernate (OS/S4

sleep state). This option may not be effective with some
OSs. Default value: [X]

6
ACPI S3 Support
Type Configurable Setting

Found on BIOS Page Advanced Page > ACPI Table/Features Control

Description Enable or Disable ACPI S3 Support. Default value: Enabled

Native PCIE Enable

Type Configurable Setting

Found on BIOS Page Advanced Page > ACPI Table/Features Control

Description Enable or Disable Native PCIE. Default value: Enabled

Native ASPM
Type Configurable Setting

Found on BIOS Page Advanced Page > ACPI Table/Features Control

Description Enable or Disable Native ASPM. Enabled - OS controlled

ASPM, Disabled - BIOS controlled ASPM.
Default value: Auto

Low Power S0 Idle Capability

Type Configurable Setting

Found on BIOS Page Advanced Page > ACPI Table/Features Control

Description Enable or Disable ACPI Lower Power S0 Idle Capability

(mutually exclusive with Smart Connect). While this is
enabled, it also disables 8254 timer for SLP_S0 support.
Default value: Disabled

7
CPU Configuration
Type Configurable Setting

Found on BIOS Page Advanced Page

Description CPU configuration

Advanced Page > CPU Configuration

Type
Type Information

Found on BIOS Page Advanced Page > CPU Configuration

Description Lists CPU type

ID
Type Information

Found on BIOS Page Advanced Page > CPU Configuration

Description Lists CPU ID

Speed
Type Information

Found on BIOS Page Advanced Page > CPU Configuration

Description Lists CPU speed

L1 Data Cache
Type Information

Found on BIOS Page Advanced Page > CPU Configuration

Description Lists amount of L1 data cache

8
L1 Instruction Cache
Type Information

Found on BIOS Page Advanced Page > CPU Configuration

Description Lists amount of L1 instruction cache

L2 Data Cache
Type Information

Found on BIOS Page Advanced Page > CPU Configuration

Description Lists amount of L2 data cache

L3 Data Cache
Type Information

Found on BIOS Page Advanced Page > CPU Configuration

Description Lists amount of L3 Data Cache

L4 Data Cache
Type Information

Found on BIOS Page Advanced Page > CPU Configuration

Description Lists amount of L4 Data Cache

VMX
Type Information

Found on BIOS Page Advanced Page > CPU Configuration

Description Lists if VMX is supported

SMX/TXT
Type Information

Found on BIOS Page Advanced Page > CPU Configuration

Description Lists if SMX/TXT is supported

9
Intel (VMX) Virtualization Technology
Type Configurable Setting

Found on BIOS Page Advanced Page > CPU Configuration

Description Enable or Disable Intel VMX Virtualization Technology.

When enabled, a VMM can utilize the additional hardware
capabilities provided by Vanderpool Technology.
Default value: Enabled

Active Processor Cores

Type Configurable Setting

Found on BIOS Page Advanced Page > CPU Configuration

Description Set number of cores to enable in each processor package

Hyper-Threading
Type Configurable Setting

Found on BIOS Page Advanced Page > CPU Configuration

Description Enable or Disable Hyper-Threading. Default value: Enabled

AES
Type Configurable Setting

Found on BIOS Page Advanced Page > CPU Configuration

Description Enable or Disable AES (Advanced Encryption Standard).

Default value: Enabled

10
Power & Performance
Type Configurable Setting

Found on BIOS Page Advanced Page

Description Power and performance

Boot Performance Mode

Type Configurable Setting

Found on BIOS Page Advanced Page > Power & Performance

Description Select the performance state that the BIOS will set starting
from reset vector. Possible values: Max Non-Turbo
Performance / Max Battery / Turbo Performance.
Default value: Max Non-Turbo Performance

Intel(R) SpeedStep(tm)
Type Configurable Setting

Found on BIOS Page Advanced Page > Power & Performance

Description Allows more than two frequency ranges to be supported.

Default value: Enabled

Intel(R) Speed Shift Technology

Type Configurable Setting

Found on BIOS Page Advanced Page > Power & Performance

Description Enable or Disable Intel(R) Speed Shift Technology support.

Enabling will expose the CPPC v2 interface to allow for
hardware controlled P-states. Default value: Enabled

Turbo Mode
Type Configurable Setting

Found on BIOS Page Advanced Page > Power & Performance

Description Enable or Disable processor Turbo Mode (requires Intel

Speed Step or Intel Speed Shift to be available and
enabled). Default value: Enabled

11
Configurable TDP Settings
Type Configurable Setting

Found on BIOS Page Advanced Page

Description Configurable TDP settings

Configurable TDP Boot Mode

Type Configurable Setting

Found on BIOS Page Advanced Page > Configurable TDP Settings

Description Configurable TDP Mode TDP selection. Deactivate option

will set MSR to Nominal and MMIO to Zero.
Possible values: Nominal / Down / Deactivate
Default value: Nominal

Configurable TDP Lock

Type Configurable Setting

Found on BIOS Page Advanced Page > Configurable TDP Settings

Description Configurable TDP Mode Lock sets the Lock bits on

TURBO_ACTIVATION_RATIO and CONFIG_TDP_CONTROL.
Note: When CTDP Lock is enabled Custom ConfigTDP Count
will be forced to 1 and Custom ConfigTDP Boot Index will
be forced to 0. Default value: Disabled

CTDP BIOS Control

Type Configurable Setting

Found on BIOS Page Advanced Page > Configurable TDP Settings

Description Enable or Disable CTDP control via runtime ACPI BIOS

methods. This “BIOS only” feature does not require EC or
driver support. Default value: Disabled

12
Memory Configuration
Type Configurable Setting

Found on BIOS Page Advanced Page

Description Memory Configuration Parameters

HOB Buffer Size

Type Configurable Setting

Found on BIOS Page Advanced Page > Memory Configuration

Description Set HOB buffer size. Possible values: Auto / 1B / 1KB / Max
(assuming 63KB total HOB size). Default value: Auto

ECC Support
Type Configurable Setting

Found on BIOS Page Advanced Page > Memory Configuration

Description Enable or Disable ECC Support. Default value: Enabled

Max TOLUD
Type Configurable Setting

Found on BIOS Page Advanced Page > Memory Configuration

Description Maximum value of TOLUD. Dynamic assignment would

adjust TOLUD automatically based on largest MMIO length
of installed graphic controller. Possible value: 1, 1.25, 1.5,
1.75, 2, 2.25, 2.5, 2.75, 3, 3.25, 3.5 (GB).
Default value: Dynamic

13
System Agent (SA) Configuration
Type Configurable Setting

Found on BIOS Page Advanced Page

Description System Agent (SA) Parameters

SA PCIe Code Version

Type Information

Found on BIOS Page Advanced Page > System Agent (SA) Configuration

Description Displays SA PCIe Code Version

VT-d
Type Information

Found on BIOS Page Advanced Page > System Agent (SA) Configuration

Description Lists VT-d support

Graphics Configuration
Type Configurable Setting

Found on BIOS Page Advanced Page > System Agent (SA) Configuration

Description Graphics configuration

Stop Grant Configuration

Type Configurable Setting

Found on BIOS Page Advanced Page > System Agent (SA) Configuration

Description Automatic/Manual stop grant configuration.

Default value: Auto

PCIe Spread Spectrum Clocking

Type Configurable Setting

Found on BIOS Page Advanced Page > System Agent (SA) Configuration

Description Allows disabling Spread Spectrum Clocking for compliance

testing. Default value: Enabled

14
VT-d
Type Configurable Setting

Found on BIOS Page Advanced Page > System Agent (SA) Configuration

Description Enable or Disable VT-d capability. Default value: Enabled

CHAP Device ([Link])

Type Configurable Setting

Found on BIOS Page Advanced Page > System Agent (SA) Configuration

Description Enable or Disable SA CHAP Device. Default value: Disabled

Thermal Device ([Link])

Type Configurable Setting

Found on BIOS Page Advanced Page > System Agent (SA) Configuration

Description Enable or Disable SA Thermal Device.

Default value: Disabled

GNA Device ([Link])

Type Configurable Setting

Found on BIOS Page Advanced Page > System Agent (SA) Configuration

Description Enable or Disable SA GNA Device. Default value: Disabled

CRID Support
Type Configurable Setting

Found on BIOS Page Advanced Page > System Agent (SA) Configuration

Description Enable or Disable CRID control for Intel SIPP.

Default value: Disabled

15
Above 4GB MMIO BIOS assignment
Type Configurable Setting

Found on BIOS Page Advanced Page > System Agent (SA) Configuration

Description Enable or Disable above 4GB MemoryMappedIO BIOS

assignment. This is enabled automatically when Aperture
Size is set to 2048MB. Default value: Disabled

X2APIC Opt Out

Type Configurable Setting

Found on BIOS Page Advanced Page > System Agent (SA) Configuration

Description Enable or Disable X2APIC_OPT_OUT bit.

Default value: Disabled

IPU Device ([Link])

Type Configurable Setting

Found on BIOS Page Advanced Page > System Agent (SA) Configuration

Description Enable or Disable SA IPU Device. Default value: Disabled

16
Advanced Page > System Agent (SA) Configuration > Graphics Configuration
Skip Scanning of External Gfx Card
Type Configurable Setting

Found on BIOS Page Advanced Page > System Agent (SA) Configuration >
Graphics Configuration

Description If Enabled, it will not scan for External Gfx Card on PEG and
PCH PCIE Ports. Default value: Disabled

Primary Display
Type Configurable Setting

Found on BIOS Page Advanced Page > System Agent (SA) Configuration >
Graphics Configuration

Description Select which of IGFX/PEG/PCI Graphics device should be

Primary Display or select SG for Switchable Gfx. Possible
values: Auto / IGFX / PEG / PCI / SG. Default value: Auto

Internal Graphics
Type Configurable Setting

Found on BIOS Page Advanced Page > System Agent (SA) Configuration >
Graphics Configuration

Description Keep IGFX enabled based on the setup options. Possible

values: Auto / Enabled / Disabled. Default value: Auto

GTT Size
Type Configurable Setting

Found on BIOS Page Advanced Page > System Agent (SA) Configuration >
Graphics Configuration

Description Select the GTT Size. Possible values: 8MB / 2MB / 4MB.
Default value: 8MB

17
Aperture Size
Type Configurable Setting

Found on BIOS Page Advanced Page > System Agent (SA) Configuration >
Graphics Configuration

Description Select the Aperture Size.

Note: Above 4GB MMIO BIOS assignment is automatically
enabled when selecting 2048MB aperture. To use this
feature, please disable CSM support. Possible values:
256MB / 128MB / 512MB / 1024MB / 2048MB.
Default value: 256MB

DVMT Pre-Allocated
Type Configurable Setting

Found on BIOS Page Advanced Page > System Agent (SA) Configuration >
Graphics Configuration

Description Select DVMT 5.0 Pre-Allocated (Fixed) graphics memory size

used by the Internal Graphics Device. Possible values: 0, 64,
4, 8, 12, 16, 20, 24, 28, 32/F7, 36, 40, 44, 48, 52, 56, 60 (M)
Default value: 32M

DVMT Total Gfx Mem

Type Configurable Setting

Found on BIOS Page Advanced Page > System Agent (SA) Configuration >
Graphics Configuration

Description Select DVMT 5.0 Total Graphic Memory size used by the
Internal Graphics Device. Possible values: 256M / 128M.
Default value: 256M

18
PCH-IO Configuration
Type Configurable Setting

Found on BIOS Page Advanced Page

Description PCH Parameters

PCI Express Configuration

Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration

Description PCI Express Configuration settings

SATA and RST Configuration

Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration

Description SATA Device Options Settings

HD Audio
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration

Description HD Audio Subsystem Configuration Settings

PCH LAN Controller

Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration

Description Enable or Disable the onboard NIC. Default value: Enabled

Wake on LAN Enable

Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration

Description Enable or Disable integrated LAN to wake the system.

Default value: Enabled

19
SLP_LAN# Low on DC Power
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration

Description Enable or Disable SLP_LAN# Low on DC Power.

Default value: Enabled

EFI Network
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration

Description Enable or Disable EFI Network support for onboard LAN or

WiFi module. Possible values: Disabled / Onboard NIC /
WiFi / Onboard NIC & WiFi. Default value: Disabled

Wake on WLAN and BT Enable

Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration

Description Enable or Disable PCI Express Wireless LAN and Bluetooth

to wake the system. Default value: Disabled

PXE ROM
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration

Description Enable or Disable PXE Option ROM execution.

Default value: Disabled

20
 Auto Power-On
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration

Description Specify what state to go to when power is reapplied after a

power failure (G3 state).
Enable: System will boot directly as soon as power is
applied.
Disable: System will remain in power-off state until the
power button is pressed. Default value: Disabled

Advanced Page > PCH-IO Configuration > PCI Express Configuration

PCI Express Clock Gating

Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration

Description Enable or Disable PCI Express Clock Gating.

Default value: Enabled

PCI Express Root Port

Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration > PCI Express
Configuration

Description PCIE Root Port Settings

PCI Express Root Port

Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration > PCI Express
Configuration

Description PCIE Root Port Settings

21
Advanced Page > PCH-IO Configuration > PCI Express Configuration > PCI Express
Root Port Settings
PCI Express Root Port
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration > PCI Express
Configuration > PCI Express Root Port Settings

Description Enable or disable the PCI Express Root Port.

Default value: Enabled

ASPM
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration > PCI Express
Configuration > PCI Express Root Port Settings

Description PCI Express Active State Power Management setting.

Possible values: Auto, Disabled, L0s, L1, L0sL1.
Default value: Auto

PCIE Speed
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration > PCI Express
Configuration > PCI Express Root Port Settings

Description Configure PCIe Speed. Possible values: Auto, Gen1, Gen2,

Gen3. Default value: Auto

Detect Timeout
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration > PCI Express
Configuration > PCI Express Root Port Settings

Description The number of milliseconds reference code will wait for link
to exit detect state for enabled ports before assuming
there is no device and potentially disabling the port.

22
Advanced Page > PCH-IO Configuration > SATA and RST Configuration
SATA Controllers
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration > SATA and RST
Configuration

Description Enable or Disable SATA Device. Default value: Enabled

SATA Mode Selection

Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration > SATA and RST
Configuration

Description Determines how SATA controller(s) operate. Possible

values: AHCI / RAID / Intel RST Premium With Intel Optane
System Acceleration. Default value: AHCI

Serial ATA Port X

Type Information

Found on BIOS Page Advanced Page > PCH-IO Configuration > SATA and RST
Configuration

Description Displays current population state of SATA port

Software Preserve
Type Information

Found on BIOS Page Advanced Page > PCH-IO Configuration > SATA and RST
Configuration

Description Displays if Software Preserve is supported

23
Port X
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration > SATA and RST
Configuration

Description Enable or Disable SATA Port. Default value: Enabled

Hot Plug
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration > SATA and RST
Configuration

Description Designates this port as Hot Pluggable.

Default value: Disabled

Configured as eSATA
Type Information

Found on BIOS Page Advanced Page > PCH-IO Configuration > SATA and RST
Configuration

Description Displays configured as eSATA

External
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration > SATA and RST
Configuration

Description Marks this port as external. Default value: Disabled

Spin Up Device
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration > SATA and RST
Configuration

Description If enabled for any port, Staggered Spin Up will be

performed and only the drives which have this option
enabled will spin up at boot. Default value: Disabled

24
 SATA Device Type
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration > SATA and RST
Configuration

Description Identify if SATA port is connected to Solid State Drive or

Hard Disk Drive. Possible values: Hard Disk Drive / Solid
State Drive. Default value: Hard Disk Drive

Topology
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration > SATA and RST
Configuration

Description Identify the SATA Topology if it is Default or ISATA or Flex or

DirectConnect or M2.

Advanced Page > PCH-IO Configuration > HD Audio

HD Audio
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-IO Configuration > HD Audio

Description Control Detection of the HD-Audio Device.

Disabled = HDA will be unconditionally disabled.
Enabled = HDA will be unconditionally enabled.
Default value: Enabled

25
Advanced Page > PCH-FW Configuration
ME Firmware Version
Type Information

Found on BIOS Page Advanced Page > PCH-FW Configuration

Description Displays ME firmware version

ME Firmware Mode
Type Information

Found on BIOS Page Advanced Page > PCH-FW Configuration

Description Displays ME firmware mode

ME Firmware SKU
Type Information

Found on BIOS Page Advanced Page > PCH-FW Configuration

Description Displays ME firmware SKU

ME Firmware Status 1
Type Information

Found on BIOS Page Advanced Page > PCH-FW Configuration

Description Displays ME firmware status 1

ME Firmware Status 2
Type Information

Found on BIOS Page Advanced Page > PCH-FW Configuration

Description Displays ME firmware status 2

26
ME State
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration

Description When Disabled ME will be put into ME Temporarily

Disabled Mode. Default value: Enabled

Manageability Features State

Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration

Description Enable or Disable Intel(R) Manageability features.

Note: This option disables/enables Manageability Features
support in FW. Platform must be in an unprovisioned state
before disabling ME support. Default value: Enabled

AMT BIOS Features

Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration

Description When disabled AMT BIOS Features are no longer supported

and user is no longer able to access MEBx Setup.
Note: This option does not disable Manageability Features
in FW. Default value: Enabled

AMT Configuration
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration

Description Configure Intel(R) Active Management Technology

Parameters

27
ME Unconfig on RTC Clear
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration

Description When Disabled ME will not be unconfigured on RTC Clear.

Default value: Enabled

Comms Hub Support

Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration

Description Enable or Disable support for Comms Hub.

Default value: Disabled

JHI Support
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration

Description Enable or Disable Intel(R) DAL Host Interface Service (JHI).

Default value: Disabled

Core BIOS Done Message

Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration

Description Enable or Disable sending Core BIOS Done Message to ME.

Default value: Enabled

Firmware Update Configuration

Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration

Description Configure Management Engine Technology Parameters

28
 PTT Configuration
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration

Description Configure PTT

Advanced Page > PCH-FW Configuration > AMT Configuration

ASF Support
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > ASF Support

Description Enable or Disable Alert Standard Format support.

Default value: Enabled

USB Provisioning of AMT

Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > ASF Support

Description Enable or Disable AMT USB Provisioning.

Default value: Disabled

CIRA Configuration
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > ASF Support

Description Configure Remote Assistance Process parameters

ASF Configuration
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > ASF Support

Description Configure Alert Standard Format parameters

29
 Secure Erase Configuration
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > ASF Support

Description Secure Erase Configuration menu

MEBx Resolution Settings

Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > ASF Support

Description Resolution settings for MEBx display modes

Advanced Page > PCH-FW Configuration > ASF Support > CIRA Configuration
Activate Remote Assistance Process
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > ASF Support >
CIRA Configuration

Description Trigger CIRA boot

Note: Network Access must first be activated from MEBx
Setup. Possible values :[ ] / [X]. Default value: [ ]

CIRA Timeout
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > ASF Support >
CIRA Configuration

Description OEM defined timeout for MPS connection to be

established.
0 - use the default timeout value of 60 seconds
255 - MEBx waits until the connection succeeds
Default value: 0 (Grayed out unless Activate Remote
Assistance Process enabled)

30
Advanced Page > PCH-FW Configuration > ASF Support > ASF Configuration
PET Progress
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > ASF Support >
ASF Configuration

Description Enable or Disable PET Events Progress to receive PET

Events. Default value: Enabled

WatchDog
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > ASF Support >
ASF Configuration

Description Enable or Disable the WatchDog Timer.

Default value: Disabled

OS Timer
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > ASF Support >
ASF Configuration

Description Set OS watchdog timer. Default value: 0 (Grayed out unless

watchdog enabled)

BIOS Timer
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > ASF Support >
ASF Configuration

Description Set BIOS watchdog timer. Default value: 0 (Grayed out

unless watchdog enabled)

31
 ASF Sensors Table
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > ASF Support >
ASF Configuration

Description Adds ASF Sensor Table into ASF ACPI Table.

Default value: Disabled

Advanced Page > PCH-FW Configuration > ASF Support > Secure Erase
Configuration
Secure Erase Mode
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > ASF Support >
Secure Erase Configuration

Description Change Secure Erase module behavior:

Simulated: Performs SE flow without erasing SSD
Real: Erase SSD
Default value: Simulated

Force Secure Erase

Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > ASF Support >
Secure Erase Configuration

Description Force Secure Erase on next boot. Default value: Disabled

32
Advanced Page > PCH-FW Configuration > ASF Support > MEBx Resolution
Settings
Non-UI Mode Resolution
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > ASF Support >
MEBx Resolution Settings

Description Resolution for non-UI text mode. Possible values: Auto /

80x25 / 100x31. Default value: Auto

UI Mode Resolution
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > ASF Support >
MEBx Resolution Settings

Description Resolution for UI text mode. Possible values: Auto / 80x25 /

100x31. Default value: Auto

Graphics Mode Resolution

Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > ASF Support >
MEBx Resolution Settings

Description Resolution for graphics mode. Possible values: Auto /

640x480 / 800x600 / 1024x768. Default value: Auto

33
Advanced Page > PCH-FW Configuration > Firmware Update Configuration
ME Firmware Re-Flash
Type Configurable Setting

Found on BIOS Page Advanced Page > PCH-FW Configuration > Firmware Update
Configuration

Description Enable or Disable ME FW Image Re-Flash function. Default

value: Disabled

Advanced Page > Thermal Configuration

Automatic Thermal Reporting
Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description Configure _CRT, _PSV and _AC0 automatically based on

values recommended in BWG’s Thermal Reporting for
Thermal Management settings. Set to Disabled for manual
configuration. Default value: Disabled

Critical Trip Point

Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description This value controls the temperature of the ACPI Critical Trip
Point - the point at which the OS will shut the system off.
Note: 119C is the Plan Of Record (POR) for all Intel mobile
processors.
Possible values: 15, 23, 31, 39, 47, 55, 63, 71, 79, 87, 95, 100,
103, 111, 127 C
Default value: 119 C (POR)

34
Active Trip Point 0
Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description This value controls the temperature of the ACPI Active Trip
Point 0 - the point at which the OS will set the processor fan
to Active Trip Point 0 Fan Speed.
Possible values: 15, 23, 31, 39, 47, 55, 63, 71, 79, 87, 95, 100,
111, 127 C
Default value: 71 C

Active Trip Point 0 Fan Speed

Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description Active Trip Point 0 Fan Speed in percentage. Value must be

between 0 (Fan off) - 100 (Max fan speed). This is the speed
at which the fan will run when Active Trip Point 0 is crossed.
Possible values: 0 - 100
Default value: 100

Active Trip Point 1

Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description This controls the temperature of the ACPI Active Trip Point
1 - the point at which the OS will set the processor fan to
Active Trip Point 1 Fan Speed.
Possible values: 15, 23, 31, 39, 47, 63, 71, 79, 87, 95, 100,
103, 111, 119 (POR), 127 C
Default value: 55 C

35
Active Trip Point 1 Fan Speed
Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description Active Trip Point 1 Fan Speed in percentage. Value must be

between 0 (Fan off) - 100 (Max fan speed). This value must
be less than Active Trip Point 0 Fan Speed. This is the speed
at which the fan will run when Active Trip 1 is crossed.
Possible values: 0 - 100
Default value: 75

Passive Trip Point

Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description This value controls the temperature of the ACPI Passive

Trip Point - the point in which the OS will begin throttling
the processor.
Possible values: 15, 23, 31, 39, 47, 55, 63, 71, 79, 87, 100,
103, 111, 119 (POR), 127 C
Default value: 95 C

Passive TC1 Value

Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description This value sets the TC1 value for the ACPI Passive Cooling
Formula. Range 1-16. Default value: 1

Passive TC2 Value

Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description This value sets the TC2 value for the ACPI Passive Cooling
Formula. Range 1-16. Default value: 5

36
Passive TSP Value
Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description This item sets the TSP value for the ACPI Passive Cooling
Formula. It represents in tenths of a second how often the
OS will read the temperature when passive cooling is
enabled. Range 2-32. Default value: 10

Active Trip Points

Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description Enable or Disable Active Trip Points. Default value: Enabled

Passive Trip Points

Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description Enable or Disable Passive Trip Points. Default value: Disabled

Critical Trip Points

Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description Enable or Disable Critical Trip Points. Default value: Enabled

Active Trip Points

Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description Enable or Disable Active Trip Points. Default value: Enabled

37
PCH Temp Read
Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description PCH Temperature Read Enable

CPU Energy Read

Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description CPU Energy Read Enable

CPU Temp Read

Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description CPU Temperature Read Enable

Alert Enable Lock

Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description Lock all Alert Enable Settings. Default value: Disabled

CPU Temp
Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description Fail Safe temp that EC will use if OS is hung. Default value: 75

CPU Fan Speed

Type Configurable Setting

Found on BIOS Page Advanced Page > Thermal Configuration

Description Fan speed that EC will use if OS is hung. Default value: 65

38
Advanced Page > SIO NCT5524D
UART Port 1 Configuration
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip

Description UART configuration

UART Port 2 Configuration

Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip

Description UART configuration

Fan Control
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip

Description Fan control configuration

Hardware Monitor
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip

Description Monitor all hardware sensors like voltage/temperature/fan

speed

39
Advanced Page > SIO NCT5524D CHIP > UART Port X Configuration
UART Port X
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > UART Port X
Configuration

Description Configure UART Port using options:

[Disabled] Disable device
[Enabled] Enable device and use below settings
Default value: Enabled

Power Over Cable

Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > UART Port X
Configuration

Description COM port power over cable enable. Default value: Disabled

Power Source Select

Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > UART Port X
Configuration

Description COM port power source select. Possible values: 5V / 12V.

Default value: 5V

Mode Select
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > UART Port X
Configuration

Description COM port mode select.

Possible values: Pure RS-232, RS-422 Full Duplex, RS-485
Half Duplex (TX ENABLE Low Active), RS-485 Half Duplex (TX
ENABLE High Active), RS-422 Full Duplex (with termination
resistor and bias resistor), Pure RS-232 (co-exists with
RS485), RS-485 Half Duplex (with termination resistor and
bias resistor), Low Power Shutdown
Default value: Pure RS-232

40
Advanced Page > SIO NCT5524D CHIP > Fan Control (Manual)
SYSFANIN
Type Information

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control
(Manual)

Description Displays current Fan RPM

CPUTIN
Type Information

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control
(Manual)

Description Displays current CPU temperature

Mode
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control
(Manual)

Description Choose Control Mode. Possible values: Manual, Thermal

Cruise, Speed Cruise, Smart Fan IV. Default value: Manual

PWM/DC Output
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control
(Manual)

Description Select fan output signal. Possible values: PWM Duty Cycle
(%), DC Voltage (%). Default value: PWM Duty Cycle (%)

41
 Output Buffer Type
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control
(Manual)

Description Select output buffer type. Possible values: Open-Drain,

Push-Pull. Default value: Open-Drain

PWM Duty Cycle (%) / DC Voltage (%) (Changes based on selected output mode)
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control
(Manual)

Description Manually adjust PWM duty cycle [0-100]% / Manually adjust

DC Voltage [0-100]%. Default value: 100

Advanced Page > SIO NCT5524D CHIP > Fan Control (Thermal Cruise)
SYSFANIN
Type Information

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control
(Thermal Cruise)

Description Displays current Fan RPM

CPUTIN
Type Information

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control
(Thermal Cruise)

Description Displays current CPU temperature

42
Mode
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control
(Thermal Cruise)

Description Choose Control Mode. Possible values: Manual, Thermal

Cruise, Speed Cruise, Smart Fan IV. Default value: Manual

PWM/DC Output
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control
(Thermal Cruise)

Description Select fan output signal. Possible values: PWM Duty Cycle
(%), DC Voltage (%). Default value: PWM Duty Cycle (%)

Output Buffer Type

Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip >Fan Control
(Thermal Cruise)

Description Select output buffer type. Possible values: Open-Drain,

Push-Pull. Default value: Open-Drain

Target Temperature (°C)

Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control
(Thermal Cruise)

Description The fan will try to maintain a temperature within Target

Temperature ± Tolerance. Default value: 0

Tolerance (°C)
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control
(Thermal Cruise)

Description Temperature tolerance. Default value: 0

43
Advanced Page > SIO NCT5524D CHIP > Fan Control (Speed Cruise)
SYSFANIN
Type Information

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Speed
Cruise)

Description Displays current Fan RPM

CPUTIN
Type Information

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Speed
Cruise)

Description Displays current CPU temperature

Mode
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Speed
Cruise)

Description Choose Control Mode. Possible values: Manual, Thermal

Cruise, Speed Cruise, Smart Fan IV. Default value: Manual

PWM/DC Output
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Speed
Cruise)

Description Select fan output signal. Possible values: PWM Duty Cycle
(%), DC Voltage (%). Default value: PWM Duty Cycle (%)

44
Output Buffer Type
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Speed
Cruise)

Description Select output buffer type. Possible values: Open-Drain,

Push-Pull. Default value: Open-Drain

Target Fan Speed

Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Speed
Cruise)

Description The fan will try to keep the fan speed within Target Fan
Speed ± Tolerance. When the fan speed is in this range, fan
speed won’t change. If the fan speed is outside of this
range, the fan will speed up or slow down toward the
range. Default value: 0

Tolerance
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Speed
Cruise)

Description Fan Speed Tolerance. Default value: 0

45
Advanced Page > SIO NCT5524D CHIP > Fan Control (Smart Fan IV)
SYSFANIN
Type Information

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Smart
Fan IV)

Description Displays current Fan RPM

CPUTIN
Type Information

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Smart
Fan IV)

Description Displays current CPU temperature

Mode
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Smart
Fan IV)

Description Choose Control Mode. Possible values: Manual, Thermal

Cruise, Speed Cruise, Smart Fan IV. Default value: Manual

PWM/DC Output
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Smart
Fan IV)

Description Select fan output signal. Possible values: PWM Duty Cycle
(%), DC Voltage (%). Default value: PWM Duty Cycle (%)

46
Output Buffer Type
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Smart
Fan IV)

Description Select output buffer type. Possible values: Open-Drain,

Push-Pull. Default value: Open-Drain

Boundary 0 (°C)
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip >Fan Control (Smart
Fan IV)

Description This value controls the temperature at which the fan speed
will be set to Output 0. Default value: 30

Output 0 (%)
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Smart
Fan IV)

Description Output 0 fan speed. Value must be between 0 (Fan off) -

100 (Max fan speed). This is the speed at which the fan will
run when Boundary 0 is crossed. Default value: 25

Boundary 1 (°C)
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Smart
Fan IV)

Description This value controls the temperature at which the fan speed
will be set to Output 1. Default value: 40

47
Output 1 (%)
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Smart
Fan IV)

Description Output 1 fan speed. Value must be between 0 (Fan off) -

100 (Max fan speed). This is the speed at which the fan will
run when Boundary 1 is crossed. Default value: 50

Boundary 2 (°C)
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Smart
Fan IV)

Description This value controls the temperature at which the fan speed
will be set to Output 2. Default value: 50

Output 2 (%)
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Smart
Fan IV)

Description Output 2 fan speed. Value must be between 0 (Fan off) -

100 (Max fan speed). This is the speed at which the fan will
run when Boundary 2 is crossed. Default value: 75

Boundary 3 (°C)
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Smart
Fan IV)

Description This value controls the temperature at which the fan speed
will be set to Output 3. Default value: 60

48
 Output 3 (%)
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Fan Control (Smart
Fan IV)

Description Output 3 fan speed. Value must be between 0 (Fan off) -

100 (Max fan speed). This is the speed at which the fan will
run when Boundary 3 is crossed. Default value: 100

Advanced Page > SIO NCT5524D CHIP > Hardware Monitor

Refresh Cycle
Type Configurable Setting

Found on BIOS Page Advanced Page > SIO NCT5524D Chip > Hardware Monitor

Description 0: Stop updating

1-15: Seconds between sensor refresh
Default value: 1

49
Security Page
Current TPM Device
Type Information

Found on BIOS Page Security Page

Description Displays current TPM device

TPM State
Type Information

Found on BIOS Page Security Page

Description Displays current TPM state

TPM Active PCR Hash Algorithm

Type Information

Found on BIOS Page Security Page

Description Displays active PCR hash algorithm

TPM Hardware Supported Hash Algorithm

Type Information

Found on BIOS Page Security Page

Description Displays hardware supported hash algorithm

BIOS Supported Hash Algorithm

Type Information

Found on BIOS Page Security Page

Description Displays BIOS supported hash algorithm

50
TrEE Protocol Version
Type Configurable Setting

Found on BIOS Page Security Page

Description Select TrEE Protocol Version: 1.0 or 1.1. Possible values: 1.1,
1.0. Default value: 1.1

TPM Availability
Type Configurable Setting

Found on BIOS Page Security Page

Description When Hidden, don’t exposes TPM to 0. Possible values:

Available/Hidden. Default value: Available

TPM Operation
Type Configurable Setting

Found on BIOS Page Security Page

Description Select one of the supported operation to change TPM2

state. Possible values: Enable, SetPCRBanks(Algorithm),
LogAllDigests, SetPPRequiredForClear_True,
SetPPRequiredForClear_False,
SetPPRequiredForTurnOn_False,
SetPPRequiredForTurnOn_True,
SetPPRequiredForTurnOff_False,
SetPPRequiredForTurnOff_True,
SetPPRequiredForChangePCRs_False,
SetPPRequriedForChangePCRs_True,
SetPPRequiredForChangeEPS_False,
SetPPRequiredForChangeEPS_True, ChangeEPS
Default value: No Operation

Clear TPM
Type Configurable Setting

Found on BIOS Page Security Page

Description Remove all TPM context associated with a specific owner.

51
Set Supervisor Password
Type Configurable Setting

Found on BIOS Page Security Page

Description Install or Change the supervisor password.

Note: The password must be more than one character in
length.

Boot Page
Boot Type
Type Configurable Setting

Found on BIOS Page Boot Page

Description Select Dual boot type, Legacy boot type or UEFI boot type.
Possible values: UEFI Boot Type, Dual Boot Type, Legacy
Boot Type. Default value: UEFI Boot Type

Network Stack
Type Configurable Setting

Found on BIOS Page Boot Page

Description Network Stack Support:

Windows 8 BitLocker Unlock
UEFI IPv4/IPv6 PXE
Legacy PXE OPROM
Default value: Disabled

PXE Boot Capability

Type Configurable Setting

Found on BIOS Page Boot Page

Description Disabled: Support Network Stack

UEFI PXE: IPv4/IPv6
Possible values: Disabled, UEFI: IPv4, UEFI: IPv6, UEFI:
IPv4/IPv6. Default value: Disabled (Grayed out and Disabled
unless Network Stack is Enabled)

52
Add Boot Options
Type Configurable Setting

Found on BIOS Page Boot Page

Description Position in Boot Order for Shell, Network, and Removables.

Possible values: First, Last. Default value: First

USB Boot
Type Configurable Setting

Found on BIOS Page Boot Page

Description Disables or enables booting to USB boot devices.

Default value: Enabled

UEFI OS Fast Boot

Type Configurable Setting

Found on BIOS Page Boot Page

Description If enabled the system firmware does not initialize keyboard

and check for firmware menu key. Default value: Enabled

EFI
Type Configurable Setting

Found on BIOS Page Boot Page

Description EFI Boot Order Settings

53
Exit Page
Exit Saving Changes
Type Selectable

Found on BIOS Page Exit Page

Description Exit system setup and save your changes

Save Change Without Exit

Type Selectable

Found on BIOS Page Exit Page

Description Save your changes without exiting setup

Exit Discarding Changes

Type Selectable

Found on BIOS Page Exit Page

Description Exit system setup without saving your changes

Load Optimal Defaults

Type Selectable

Found on BIOS Page Exit Page

Description Load optimal defaults

Load Custom Defaults

Type Selectable

Found on BIOS Page Exit Page

Description Load custom defaults

54
Save Custom Defaults
Type Selectable

Found on BIOS Page Exit Page

Description Save custom defaults

Discard Changes
Type Selectable

Found on BIOS Page Exit Page

Description Discard changes

55