OWNER’S MANUAL

Safety and Reference

LED TV*
* Disclaimer
LG LED TV applies LCD screen with LED backlights.

Please read this manual carefully before operating your set and retain it for
future reference.

[Link]
* MFL70265922*
(2001-REV00) Copyright © 2020 LG Electronics Inc. All Rights Reserved.
 India region only. (Below sentence is not applicable for above 1920 x 1080 resolution TV models.)

ATTENTION:
This product is qualified for the BEE Star rating in the ‘Home’ Mode.
ENGLISH

The Objectives of Star Labeling Program is designed to promote energy efficient products and practices.
When the television is initially set up, it is designed to meet the BEE Star Labeling requirements while maintaining optimum picture quality.
•• Changes to certain functionalities of this television (TV Guide, Picture/sound etc) may change the power consumption.
•• Depending upon such changed setting (eg., Retail mode), the power consumption may vary which possibly could exceed the stated
energy consumption.
To reset the television to Star rating qualified settings, select ‘Home’ mode from the initial set-up procedure in ‘factory settings’ under the
‘Set-up’ menu.

2
Warning! Safety Instructions •• Ventilation
-- Install your TV where there is proper ventilation. Do not install in
a confined space such as a bookcase.
-- Do not install the product on a carpet or cushion.
-- Do not block or cover the product with cloth or other materials

ENGLISH
CAUTION while unit is plugged in.
RISK OF ELECTRIC SHOCK •• Take care not to touch the ventilation openings. When watching
DO NOT OPEN the TV for a long period, the ventilation openings may become hot.
•• Protect the power cord from physical or mechanical abuse, such as
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT being twisted, kinked, pinched, closed in a door, or walked upon.
REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. Pay particular attention to plugs, wall outlets, and the point where
REFER TO QUALIFIED SERVICE PERSONNEL. the cord exits the device.
This symbol is intended to alert the user to the presence of •• Do not move the TV whilst the Power cord is plugged in.
uninsulated “dangerous voltage” within the product’s •• Do not use a damaged or loosely fitting power cord.
enclosure that may be of sufficient magnitude to constitute a risk •• Be sure to grasp the plug when unplugging the power cord. Do not
of electric shock to persons. pull on the power cord to unplug the TV.
This symbol is intended to alert the user to the presence of •• Do not connect too many devices to the same AC power outlet as
important operating and maintenance (servicing) this could result in fire or electric shock.
instructions in the literature accompanying the appliance. •• Disconnecting the Device from the Main Power
-- The power plug is the disconnecting device. In case of an
WARNING : TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK,
emergency, the power plug must remain readily accessible.
DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
•• Do not let your children climb or cling onto the TV. Otherwise, the
TV may fall over, which may cause serious injury.
•• TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER ITEMS •• Outdoor Antenna Grounding (Can differ by country):
WITH OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES. -- If an outdoor antenna is installed, follow the precautions below.
•• Do not place the TV and/or remote control in the following An outdoor antenna system should not be located in the vicinity
environments: of overhead power lines or other electric light or power circuits,
-- Keep the product away from direct sunlight. or where it can come in contact with such power lines or circuits
-- An area with high humidity such as a bathroom as death or serious injury can occur.
-- Near any heat source such as stoves and other devices that
Be sure the antenna system is grounded to provide some
produce heat.
protection against voltage surges and built-up static charges.
-- Near kitchen counters or humidifiers where they can easily be
exposed to steam or oil. Section 810 of the National Electrical Code (NEC) in the U.S.A.
-- An area exposed to rain or wind. provides information with respect to proper grounding of the
-- Do not expose to dripping or splashing and do not place objects mast and supporting structure, grounding of the lead-in wire
filled with liquids, such as vases, cups, etc. on or over the to an antenna discharge unit, size of grounding conductors,
apparatus (e.g., on shelves above the unit). location of antenna discharge unit, connection to grounding
-- Near flammable objects such as gasoline or candles, or expose electrodes and requirements for the grounding electrode.
the TV to direct air conditioning. Antenna grounding according to the National Electrical Code,
-- Do not install in excessively dusty places. ANSI/NFPA 70
Otherwise, this may result in fire, electric shock, combustion/
explosion, malfunction or product deformation.

3
 •• Grounding (Except for devices which are not grounded.) •• Never disassemble the AC adapter or power cord. This may result in
-- TV with a three-prong grounded AC plug must be connected to fire or electric shock.
a three-prong grounded AC outlet. Ensure that you connect the •• Handle the adapter carefully to avoid dropping or striking it. An
earth ground wire to prevent possible electric shock. impact could damage the adapter.
•• Never touch this apparatus or antenna during a lightning storm. •• To reduce the risk of fire or electrical shock, do not touch the TV
ENGLISH

You may be electrocuted. with wet hands. If the power cord prongs are wet or covered with
•• Make sure the power cord is connected securely to the TV and wall dust, dry the power plug completely or wipe dust off.
socket if not secured damage to the Plug and socket may occur and •• Batteries
in extreme cases a fire may break out. -- Store the accessories (battery, etc.) in a safe location out of the
•• Do not insert metallic or inflammable objects into the product. If a reach of children.
foreign object is dropped into the product, unplug the power cord -- Do not short circuit, disassemble, or allow the batteries to
and contact the customer service. overheat. Do not dispose of batteries in a fire. Batteries should
•• Do not touch the end of the power cord while it is plugged in. You not be exposed to excessive heat.
may be electrocuted. -- Caution : Risk of fire or explosion if the battery is replaced by an
•• If any of the following occur, unplug the product incorrect type.
immediately and contact your local customer service. •• Moving
-- The product has been damaged. -- When moving, make sure the product is turned off, unplugged,
-- If water or another substance enters the product (like an AC and all cables have been removed. It may take 2 or more people
adapter, power cord, or TV). to carry larger TVs. Do not press or put stress on the front panel
-- If you smell smoke or other odors coming from the TV of the TV. Otherwise, this may result in product damage, fire
-- When lightning storms or when unused for long periods of time. hazard or injury.
Even the TV is turned off by remote control or button, AC power •• Keep the packing anti-moisture material or vinyl packing out of the
source is connected to the unit if not unplugged in. reach of children.
•• Do not use high voltage electrical equipment near the TV (e.g., a •• Do not allow an impact shock, any objects to fall into the product,
bug zapper). This may result in product malfunction. and do not drop anything onto the screen.
•• Do not attempt to modify this product in any way without written •• Do not press strongly upon the panel with a hand or a sharp object
authorization from LG Electronics. Accidental fire or electric shock such as a nail, pencil, or pen, or make a scratch on it. It may cause
can occur. Contact your local customer service for service or repair. damage to screen.
Unauthorized modification could void the user’s authority to •• Cleaning
operate this product. -- When cleaning, unplug the power cord and wipe gently with a
•• Use only an authorized attachments / accessories approved by soft/dry cloth. Do not spray water or other liquids directly on the
LG Electronics. Otherwise, this may result in fire, electric shock, TV. Do not clean your TV with chemicals including glass cleaner,
malfunction, or product damage. any type of air freshener, insecticide, lubricants, wax (car,
industrial), abrasive, thinner, benzene, alcohol etc., which can
damage the product and/or its panel. Otherwise, this may result
in electric shock or product damage.

4
Preparing Separate Purchase

•
factory, initialization of the TV may take a few minutes.

ENGLISH
• items. These devices only work with certain models.
• The model name or design may be changed depending on the upgrade
shown in this manual. of product functions, manufacturer’s circumstances or policies.
•
or product model that you are using.
• New features may be added to this TV in the future.
Magic Remote Control
• The device must be easily accessed to a location outlet near the
MR20GA
Check whether your TV model supports Bluetooth in the Wireless
• The items supplied with your product may vary depending on the
model. Remote.
•
without prior notice due to upgrade of product functions. Wall Mounting Bracket
• For an optimal connection, HDMI cables and USB devices should
(Depending on model)
extension cable that supports USB 2.0 if the USB cable or USB Make sure to use screws and wall mount bracket that meet the VESA
standard. Standard dimensions for the wall mount kits are described in
the following table.
B B *A≦
*B≦ A
A A
B
•
•
or a connection error may occur.
• Recommended HDMI Cable Types
- Ultra High Speed HDMI®/™ cable (3 m or less)
43UN71* 49/55UN71*
• How to use the ferrite core (Depending on model) 43UN72* 49/55UN72*
- Use the ferrite core to reduce the electromagnetic interference in 43/50UN73* 49/55UN73*
the power cord. Wind the power cord on the ferrite core once. Model
43UN74* 49/55UN74*
50UN80* 55UN80*
(Wall side ) (TV side) 43/50UN81* 55UN81*
VESA (A x B) (mm) 200 x 200 300 x 300
Standard screw M6 M6
Number of screws 4 4
10 cm (+ / -2 cm)

5
 60/65UN71* • When transporting a large TV, there should be at least 2 people.
75UN71* • When transporting the TV by hand, hold the TV as shown in the
65UN72*
75UN72* following illustration.
65UN73*
Model 70UN73*
65UN74*
75/82/86UN80*
65UN80*
75/82/86UN81*
ENGLISH

65UN81*
VESA (A x B) (mm) 300 x 300 600 x 400
Standard screw M6 M8
Number of screws 4 4
• When transporting the TV, do not expose the TV to jolts or excessive
vibration.
• When transporting the TV, keep the TV upright, never turn the TV
on its side or tilt towards the left or right.
Lifting and moving the TV •
chassis as it may damage screen.
• When handling the TV, be careful not to damage the protruding
buttons.
Please note the following advice to prevent the TV from being scratched
or damaged and for safe transportation regardless of its type and size. • Avoid touching the screen at all times, as this may result in
• It is recommended to move the TV in the box or packing material damage to the screen.
that the TV originally came in. • When attaching the stand to the TV set, place the screen
• Before moving or lifting the TV, disconnect the power cord and all
cables. the screen from scratches.
• When holding the TV, the screen should face away from you to
avoid damage.
Mounting on the Table

1 Lift and tilt the TV into its upright position on a table.

• Leave a 10 cm (minimum) space from the wall for proper
• ventilation.
hold the transparent part, speaker, or speaker grill area.

10 cm
10 cm 10 cm
10 cm

10 cm

(Depending on model)
2 Connect the power cord to a wall outlet.

NOTE

accommodate TV base stand.

6
• Do not apply foreign substances (oils, lubricants, etc.) to Securing TV to the Wall
the screw parts when assembling the product. (Features may vary depending on models.)
(Doing so may damage the product.)
• If you install the TV on a stand, you need to take actions
to prevent the product from overturning. Otherwise, the

ENGLISH
product may fall over, which may cause injury.
• Do not use any unapproved items to ensure the safety and
product life span.
• Any damage or injuries caused by using unapproved items
are not covered by the manufacturer’s warranty.
• Make sure that the screws are inserted correctly and
(Depending on model)
fastened securely. (If they are not fastened securely
enough, the TV may tilt forward after being installed.) 1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back
Do not use too much force and over tighten the screws; of the TV.
otherwise screw may be damaged and not tighten • If there are bolts inserted at the eye-bolts position, remove the
correctly.
• 2 Mount the wall brackets with the bolts to the wall. Match the
location, it can be potentially hazardous due to falling. location of the wall bracket and the eye-bolts on the rear of the TV.
Many injuries, particularly to children, can be avoided by 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
taking simple precautions such as:
- Using cabinets or stands recommended by the
manufacturer of the television. • Use a platform or cabinet that is strong and large enough to
- Only using furniture that can safely support the support the TV securely.
television. • Brackets, bolts and ropes are not provided. You can obtain
- Ensuring the television is not overhanging the edge of additional accessories from your local dealer.
the supporting furniture.
- Not placing the television on tall furniture (for example,
cupboards or bookcases) without anchoring both the
furniture and the television to a suitable support.
- Not standing the televisions on cloth or other materials
placed between the television and supporting furniture. • Use a platform or cabinet that is strong and large enough to
- Educating children about the dangers of climbing on support the TV securely.
furniture to reach the television or its controls. • Brackets, bolts and ropes are not provided. You can obtain
additional accessories from your local dealer.

7
 Mounting to the Wall 75/86UN81*

Attach an optional wall mount bracket at the rear of the TV carefully

and install the wall mount bracket on a solid wall perpendicular to
ENGLISH

of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with
cables connected. When you do not use LG’s wall mount bracket, please
use a wall mount bracket where the device is adequately secured to the
wall with enough space to allow connectivity to external devices. It is

82UN81*

10 cm
10 cm 10 cm

10 cm
10 cm

(Depending on model)
• Do not use a sharp object when you detached the cable
CAUTION cover. This could damage the cable or the cabinet. It may
• Remove the stand before installing the TV on a wall mount also cause personal harm. (Depending on model)
by performing the stand attachment in reverse.
• For more information of screws and wall mount bracket,
refer to the Separate purchase.
• If you intend to mount the product to a wall, attach VESA
standard mounting interface (optional parts) to the back
of the product. When you install the set to use the wall

not to drop.
• When mounting a TV on the wall, make sure not to install
the TV by hanging the power and signal cables on the
back of the TV.
• Do not install this product on a wall if it could be exposed
to oil or oil mist. This may damage the product and cause
it to fall.

8
 • When installing the wall mounting bracket, it is recommended to Satellite dish
dust and insects. (Depending on model) Connect the TV to a satellite dish to a satellite socket with a satellite RF
cable (75 Ω). (Depending on model)

CI module

ENGLISH
View the encrypted (pay) services in digital TV mode. (Depending on
model)
• Check if the CI module is inserted into the PCMCIA card slot in
the right direction. If the module is not inserted properly, this can
Stand hole
cause damage to the TV and the PCMCIA card slot.
• If the TV does not display any video and audio when CI+ CAM is
connected, please contact to the Terrestrial/Cable/Satellite Service
Operator.

Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
HDMI
• When connecting the HDMI cable, the product and external devices

• Supported HDMI Audio format:

Connections (Depending on model)
True HD (48 kHz),
Dolby Digital / Dolby Digital Plus (32 kHz / 44.1 kHz / 48 kHz),
Connect various external devices to the TV and switch input modes to PCM (32 kHz / 44.1 kHz / 48 kHz / 96 kHz / 192 kHz)
select an external device. For more information of external device’s • → ••• → [Picture] → [Additional Settings] → [HDMI ULTRA
connection, refer to the manual provided with each device. HD Deep Colour]
(Only 82/86UN80*, 82/86UN81*)
Antenna/Cable - On : Support 4K @ 50/60 Hz ([Link], [Link], [Link]),
<3,4 port Only> 4K @ 100/120 Hz ([Link], [Link], [Link])
Connect the TV to a wall antenna socket with an RF cable (75 Ω). -
• Use a signal splitter to use more than 2 TVs. (Except for 82/86UN80*, 82/86UN81*)
• - On : Support 4K @ 50/60 Hz ([Link], [Link], [Link])
improve the image quality. -
• If the image quality is poor with an antenna connected, try to • If the device connected to Input Port also supports ULTRA HD Deep
realign the antenna in the correct direction. Colour, your picture may be clearer. However, if the device doesn’t
• An antenna cable and converter are not supplied. support it, it may not work properly. In that case, connect the
• For a location that is not supported with ULTRA HD broadcasting,
this TV cannot receive ULTRA HD broadcasts directly.

To see web manual USB

To obtain detailed User Guide information, please visit [Link]. Some USB Hubs may not work. If a USB device connected using a USB
Hub is not detected, connect it to the USB port on the TV directly.

9
 External Devices
Using Button
Available external devices are: Blu-ray player, HD receivers, DVD players,
VCRs, audio systems, USB storage devices, PC, gaming devices, and
other external devices. You can simply operate the TV functions, using the button.
ENGLISH

•• The external device connection may differ from the model.

•• Connect external devices to the TV regardless of the order of the
TV port.
•• If you record a TV program on a Blu-ray/DVD recorder or VCR, make
sure to connect the TV signal input cable to the TV through a DVD
recorder or VCR. For more information of recording, refer to the
manual provided with the connected device.
•• Refer to the external equipment’s manual for operating
instructions.
•• If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
•• In PC mode, there may be noise associated with the resolution,
vertical pattern, contrast or brightness. If noise is present, change
the PC output to another resolution, change the refresh rate to Basic functions
another rate or adjust the brightness and contrast on the [Picture]
menu until the picture is clear. Power On (Press)
•• In PC mode, some resolution settings may not work properly Power Off 1 (Press and Hold)
depending on the graphics card. Menu Control (Press 2)
•• If ULTRA HD content is played on your PC, video or audio may Menu Selection (Press and Hold 3)
become disrupted intermittently depending on your PC’s 1 All running apps will close, and any recording in progress will stop.
performance. (Depending on model) 2 You can access and adjust the menu by pressing the button when
•• When connecting via a wired LAN, it is recommended to use a CAT TV is on.
7 cable. (Only when port is provided.) 3 You can use the function when you access menu control.

Adjusting the menu

When the TV is turned on, press the button one time. You can adjust
the Menu items using the button.
Turns the power off.
Changes the input source.
Adjusts the volume level.
Scrolls through the saved programmes.

10
Using Remote Control To use the button, press and hold for more than 1 second.

(POWER) Turns the TV on or off.

(Depending on model)
Selects Radio, TV and DTV programme.

ENGLISH
The descriptions in this manual are based on the buttons on the remote , (SEARCH) Check for recommended content. (Some
control. Please read this manual carefully and use the TV correctly. recommended services may not be available in some countries.)
To replace batteries, open the battery cover, replace batteries (1.5 Search for content such as TV programmes, movies and other
V AAA) matching the and ends to the label inside the videos, or perform a web search by entering text in the search bar.
compartment, and close the battery cover. To remove the batteries, (Depending on model)
perform the installation actions in reverse. Recalls your preferred subtitle in digital mode.
Make sure to point the remote control toward the remote control sensor (Q. Settings) Accesses the Quick Settings.
on the TV. (INPUT) Changes the input source.
Number buttons Enters numbers.
Accesses the [Quick Help].
Accesses the saved programmes list.
, (MORE ACTIONS) Displays more remote control functions.
(Depending on model)
, Edits QUICK ACCESS. (Depending
on model)
-- QUICK ACCESS is a feature that allows you to enter a specified app
or Live TV directly by pressing and holding the number buttons.
Adjusts the volume level.
, Audio descriptions function will be enabled. (Depending
on model)
Accesses your favourite programme list.
Shows programme guide.
1 1 (MUTE) Mutes all sounds.
(MUTE) Accesses the [Accessibility] menu.
Scrolls through the saved programmes.
1, 1 Streaming Service buttons Connects to the Video
Streaming Service. (Depending on model)
(HOME) Accesses Home menu.
1 1 (HOME) Shows the previous history.
Returns to the previous level.
Clears on-screen displays and returns to TV viewing.
Navigation buttons (up/down/left/right) Scrolls through menus
or options.
(OK) Selects menus or options and confirms your input.
(Teletext buttons) These buttons are used for
teletext.
Accesses the Quick menus. (Depending on model)
(Some buttons and services may not be provided depending on models
, Starts to record and displays record menu. (Only Time
or regions.)
MachineReady supported model) (Depending on model)
(Control buttons) Controls media contents.
, , , These access special functions in some menus.

11
 Using Magic Remote Control To use the button, press and hold for more than 1 second.

(POWER) Turns the TV on or off.

(Depending on model)
(STB POWER) You can turn your set-top box on or off by adding
ENGLISH

The descriptions in this manual are based on the buttons on the remote the set-top box to the universal remote control for your TV.
control. Please read this manual carefully and use the TV correctly. Number buttons Enters numbers.
When the message [Magic Remote battery is low. Please change the Accesses the [Quick Help].
battery.] is displayed, replace the battery. (DASH) Inserts a between numbers such as 2-1 and 2-2.
To replace batteries, open the battery cover, replace batteries (1.5 V AA) Accesses the saved programmes list.
matching the and ends to the label inside the compartment, (MORE ACTIONS) Displays more remote control functions.
and close the battery cover. Be sure to point the magic remote toward
Edits QUICK ACCESS.
the remote control sensor on the TV. To remove the batteries, perform
the installation actions in reverse. -- QUICK ACCESS is a feature that allows you to enter a specified app
or Live TV directly by pressing and holding the number buttons.
Audio descriptions function will be enabled.
Adjusts the volume level.
(MUTE) Mutes all sounds.
(MUTE) Accesses the [Accessibility] menu.
Scrolls through the saved programmes.
(Voice recognition) Network connection is required to use the
voice recognition function.
Check for recommended content. (Some recommended services may
not be available in some countries.)
(Voice recognition) Speak while pressing and holding the
button to use the voice recognition feature.
(HOME) Accesses the Home menu.
** (HOME) Shows the previous history.
(Q. Settings) Accesses the Quick Settings.
(Q. Settings) Displays the [All Settings] menu.
Wheel (OK) Press the center of the button to select a menu.
You can change programmes by using the button.
(up/down/left/right) Press the up, down, left or right
button to scroll the menu. If you press buttons while the
pointer is in use, the pointer will disappear from the screen and Magic
1 1 Remote will operate like a general remote control. To display the
pointer on the screen again, shake Magic Remote to the left and right.
1 1 (BACK) Returns to the previous level.
(BACK) Clears on-screen displays and returns to last input
viewing.
Shows programme guide.
1 Streaming Service buttons Connects to the Video Streaming
Service.
(Some buttons and services may not be provided depending on models
or regions.)

12
 Shows the previous history. User Guide
(INPUT) Changes the input source.
(INPUT) Accesses the [Home Dashboard].
Displays the set-top box Home menu. (When you are not For more information about this TV, read the USER GUIDE embedded in
watching via a set-top box: the display changes to the set-top box the product.

ENGLISH
screen.) • To open the USER GUIDE → ••• → [Support] → [User Guide]
, , , These access special functions in some menus.
Runs the record function.
, (Control buttons) Controls media contents.

Registering Magic Remote Control

How to register the Magic Remote Control

1 Put batteries into the Magic Remote and turn the TV on.
2 Point the Magic Remote at your TV and press the Wheel (OK) on
the remote control.
* If the TV fails to register the Magic Remote, try again after turning
the TV and back on.
How to deregister the Magic Remote Control
Press the (BACK) and (HOME) buttons at the same time, for

* Pressing and holding the button will let you cancel and re-regis-
ter Magic Remote at once.

CAUTION

• Do not mix new batteries with old batteries. This may

cause the batteries to overheat and leak.
• Failure to match the correct polarities of the battery

personal injury, or ambient pollution.

• This apparatus uses batteries. In your community there
might be regulations that require you to dispose of these
batteries properly due to environmental considerations.
Please contact your local authorities for disposal or
recycling information.
• Batteries inside or inside the product shall not be exposed

• In Analogue TV and some countries, some remote control

buttons may not work.

13
 Troubleshooting Generated Sound
•• “Cracking” noise: A cracking noise that occurs when watching or
turning off the TV is generated by plastic thermal contraction due
Cannot control the TV with the remote control. to temperature and humidity. This noise is common for products
where thermal deformation is required.
ENGLISH

•• Check the remote control sensor on the product and try again.
•• Check if there is any obstacle between the product and the remote •• Electrical circuit humming/panel buzzing: A low level noise is
control. generated from a high-speed switching circuit, which supplies a
•• Check if the batteries are still working and properly installed ( large amount of current to operate a product. It varies depending
to , to ). on the product. This generated sound does not affect the
No image display and no sound is produced. performance and reliability of the product.
•• Check if the product is turned on.
•• Check if the power cord is connected to a wall outlet. •• When cleaning the product, be careful not to allow any
•• Check if there is a problem in the wall outlet by connecting other liquid or foreign objects to enter the gap between the
products. upper, left or right side of the panel and the guide panel.
The TV turns off suddenly. (Depending on model)
•• Check the power control settings. The power supply may be
interrupted.
•• Check if the auto-off function is activated on the settings related
time.
•• If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity. •• Make sure to wring any excess water or cleaner from the
When connecting to the PC (HDMI), no signal is detected. cloth.
•• Turn the TV off/on using the remote control. •• Do not spray water or cleaner directly onto the TV screen.
•• Reconnect the HDMI cable. •• Make sure to spray just enough of water or cleaner onto a
•• Restart the PC with the TV on. dry cloth to wipe the screen.

Abnormal Display
•• If the product feels cold to the touch, there may be a small “flicker”
when it is turned on. This is normal, there is nothing wrong with
product.
•• This panel is an advanced product that contains millions of pixels.
You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a
malfunction and does not affect the performance and reliability of
the product. This phenomenon also occurs in third-party products
and is not subject to exchange or refund.
•• You may find different brightness and colour of the panel
depending on your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel.
It is not related with the product performance, and it is not
malfunction.
•• Displaying a still image for a prolonged period of time may cause
image sticking. Avoid displaying a fixed image on the TV screen for
a long period of time.

14
Specifications

(Depending on country)

ENGLISH
Broadcasting Specifications

Digital TV Analogue TV
PAL B/B, PAL B/G, PAL D/K, PAL-I
DVB-T/T21
Television system SECAM B/G, SECAM D/K
DVB-T/T2/C/S/S22
NTSC-M
VHF, UHF
Programme coverage VHF, UHF, CATV
C-Band2, Ku-Band2
Maximum number of storable DVB-T/T2 & Analogue TV : 3,000
programmes DVB-S/S2 : 6,000
External antenna impedance 75 Ω
CI Module3 (W x H x D) 100.0mm x 55.0mm x 5.0mm
1 Only DVB-T2 support models. (Despite DVB-T2 model, DVB-T/T2 function does not apply in Philippines.)
2 Only DVB-T2/C/S2 support models.
3 Depending on model.

(Only 82/86UN80*, 82/86UN81*)

Wireless module (LGSBWAC92) specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency Range Output Power (Max.)
2,400 to 2,483.5 MHz 18 dBm
5,150 to 5,725 MHz 18 dBm
5,725 to 5,850 MHz 12 dBm
Bluetooth
Frequency Range Output Power (Max.)
2,400 to 2,483.5 MHz 8 dBm
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional
frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.
* IEEE 802.11ac is not available in all countries.

15
 (Except for 82/86UN80*, 82/86UN81*)
Wireless module (LGSBWAC02) specifications
Wireless LAN (IEEE 802.11a/b/g/n/ac)
Frequency Range Output Power (Max.)
ENGLISH

2,400 to 2,483.5 MHz 17 dBm

5,150 to 5,725 MHz 19 dBm
5,725 to 5,850 MHz 10.5 dBm
Bluetooth
Frequency Range Output Power (Max.)
2400 to 2483.5 MHz 8.5 dBm
As band channels can vary per country, the user cannot change or adjust the operating frequency. This product is configured for the regional
frequency table.
For consideration of the user, this device should be installed and operated with a minimum distance of 20 cm between the device and the body.
* IEEE 802.11ac is not available in all countries.

(Australia and New Zealand region only)

The use of the 5,150 – 5,350 MHz band is restricted to indoor use only. This restriction exists in the countries Australia (AU) and New Zealand (NZ).
(For Wi-Fi/Bluetooth built-in model or Wi-Fi built-in model)
“RF Radiation Exposure Statement
This equipment shall be installed and used at a minimum distance of 20 cm from the human body.”

Environment condition
Operating Temperature 0 °C to 40 °C
Operating Humidity Less than 80 %
Storage Temperature -20 °C to 60 °C
Storage Humidity Less than 85 %

•• The energy information provided with the product is indicated in accordance with the regulations of each country. (Depending on Country)
-- The Energy consumption is measured in accordance with IEC 62087.
•• Actual Energy consumption may vary depending on factors such as the type of video content being played and TV settings.
•• For information of the power supply and power consumption, refer to the label attached to the product. (Depending on Country)
-- The typical power consumption is measured in accordance with IEC 62087 or each country’s energy regulations.
* On some models, the label is inside the external device connection terminal cover.
* Depending on the model or country, the typical power consumption may not be on label.

16
Open Source Software Regulatory
Notice Information
WARNING!

ENGLISH
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit [Link] Never place a television set in an unstable location. A television set may
[Link]. fall, causing serious personal injury or death. Many injuries, particularly
to children, can be avoided by taking simple precautions such as:
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download. • Using cabinets or stands recommended by the manufacturer of the
television set.
LG Electronics will also provide open source code to you on CD-ROM
• Only using furniture that can safely support the television set.
for a charge covering the cost of performing such distribution (such
• Ensuring the television set is not overhanging the edge of the
as the cost of media, shipping, and handling) upon email request to
supporting furniture.
opensource@[Link].
• Not placing the television set on tall furniture (for example,
cupboards or bookcases) without anchoring both the furniture and
the television set to a suitable support.
• Not placing the television set on cloth or other materials that may
be located between the television set and supporting furniture.
Licenses • Educating children about the dangers of climbing on furniture to
reach the television set or its controls.
If your existing television set is being retained and relocated, the same
considerations as above should be applied.

Symbols

Refers to alternating current(AC).

Refers to direct current(DC).

(Magic Remote supported models only)
Refers to class II equipment.

Refers to stand-by.

Refer to “ON” (power).

Refers to dangerous voltage.

17
 Environmental information
(India region only)

Disposal of your old appliance (as per e-waste Rules)

ENGLISH

1 When this crossed out wheeled bin symbol is depicted on the product and its operator’s manual, it means the product is
covered by the e-waste Management and Handling Rules, 2011 and are meant to be recycled, dismantled, refurbished
or disposed off.
2 Do’s :
a. The product is required to be handed over only to the authorized recycler for disposal.
b. Keep the product in isolated area, after it becomes non-functional/unrepairable so as to prevent its accidental
breakage.
Don’t :
a. The product should not be opened by the user himself/herself, but only by authorized service personnel.
b. The product is not meant for re-sale to any unauthorized agencies/scrap dealer/kabariwalah.
c. The product is not meant for mixing into household waste stream.

sentence
LGE Internal Use Only d. Do not keep any replaced spare part(s) from the product in exposed area.
3 Any disposal through unauthorized agencies/person will attract action under Environment (Protection) Act 1986.
4 “This product is complied with the requirement of Hazardous Substances as specified under Rule 13 (1) & (2) of the E-Waste (Management &
Handling) Rules, 2011”.
5 To locate a nearest collection centre or call for pick-up (limited area only) for disposal of this appliance, please contact Toll Free No. 1800-315-
E _ Provided sentence LGE Internal Use
9999 / 1800-180-9999 OnlyAll collection centre and pick up facilities are done by third parties with LG Electronics India Pvt. Ltd.
for details.
Merely as a facilitator. For more detailed information, please visit : [Link]

( ( -- )
)

. -
“
, 18
ENGLISH

19
The model and serial number of the product are located
on the back and on one side of the product.
Record them below in case you ever need service.

Model

Serial No.