Scribd
Upload
764 views13 pages

Arterial Line Setup and Monitoring Guide

This document provides guidance on setting up and monitoring arterial lines. It discusses the anatomy, indications, appropriate sites, and Allen's test for arterial line placement. It provides details on equipment needed, setup steps like ensuring all air is removed and inflating the pressure bag, and monitoring the arterial waveform and obtaining blood draws. Care and maintenance of the line is also covered, like assessing the extremity and re-zeroing the transducer with position changes.

Uploaded by

berhanubedassa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
764 views13 pages

Arterial Line Setup and Monitoring Guide

This document provides guidance on setting up and monitoring arterial lines. It discusses the anatomy, indications, appropriate sites, and Allen's test for arterial line placement. It provides details on equipment needed, setup steps like ensuring all air is removed and inflating the pressure bag, and monitoring the arterial waveform and obtaining blood draws. Care and maintenance of the line is also covered, like assessing the extremity and re-zeroing the transducer with position changes.

Uploaded by

berhanubedassa
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
  • Introduction: Explains what an arterial line is, its advantages, and associated risks.
  • Indications for Arterial Lines: Describes the medical conditions that justify the use of arterial lines.
  • Sites for Arterial Lines: Lists the common sites for arterial line placement.
  • Allen’s Test: Details the Allen’s Test procedure used to assess blood flow before arterial line placement.
  • Overview of Arterial Line Set Up: Outlines the equipment and steps required for setting up an arterial line.
  • Patient Monitoring: Provides instructions for monitoring patients with arterial lines, including obtaining pressures.
  • The Arterial Waveform: Explains what the arterial waveform represents and how to interpret it.
  • Arterial Line Blood Draws: Gives the procedure for drawing blood from an arterial line.
  • Care and Maintenance: Discusses the care and routine maintenance required to manage arterial lines safely.

1

Arterial Lines
Set Up & Monitoring
Union Hospital
Emergency Department
2
Objectives
Introduction and review of anatomy
Indications for arterial lines
Sites for arterial pressure monitoring
Allens Test
Overview of arterial line set up
Patient monitoring
The arterial waveform
Arterial Line blood draws
Care and maintenance
3
Introduction
What is it? A Teflon catheter inserted into an
artery that is connected to a pressure
transducer system.
Advantages-Continual beat to-beat
monitoring of blood pressure, and continual
vascular access for blood sampling.
Risks-Hemorrhage, Emboli-Air or Thrombus,
Tissue ischemia, Bacterial contamination.
NOT for use as an infusion port for ANY
medications!

4
Indications for Arterial Lines
Intra arterial blood pressure monitoring
is indicated for any major medical or
surgical condition that compromises
cardiac output, tissue perfusion, or fluid
volume status.
Examples-DKA, Fluid shifts after
surgical bowel resection, respiratory
failure.
5
Sites for Arterial Lines
Radial Artery(most frequently used)
Brachial Artery
Femoral Artery
6
Allens Test
Used to establish the presence of
collateral arterial blood flow through the
PALMAR ARCH via the ULNAR artery.
Used and documented positive or
negative when considering RADIAL
artery puncture or annulations by
physician or RT.
7
Overview of Arterial Line Set
Up
Equipment needed: Pressure bag, 500cc bag
0.9% NS, Transducer tubing, #20 angiocath,
dressing supplies, dead end caps.
Ensure ALL air removed from system to
include flush bag and stopcocks.
Inflate pressure bag to 300mm.
Purpose of pressure bag is to provide a
continuous saline flush at 3-6cc/hr that will
overcome the patients systolic blood
pressure.
8
Patient Monitoring
Place transducer in holder at mid-chest/aorta
level and secure.
ZERO the system by having transducer at
(phlebostatic axis) right atrium, open
stopcock to atmospheric pressure, Zero
monitor.
Once zeroed, turn stopcock back to patient
monitoring and replace cap.
A cuff pressure on extremity not used for Art.
Line should be obtained.
9
Patient Monitoring Contd.
A 5-20 mmHg difference between cuff
and arterial pressure is normal, with the
arterial pressure being the higher of the
two.
Arterial pressure should be documented
every 5 minutes until stable.
Obtain a strip of waveform.
10
The Arterial Waveform
Represents the ejection phase of the left
ventricular systole.
As the aortic valve opens, blood is ejected
and recorded as an increase in pressure in
the arterial system.
Highest point is systolic measurement.
Dicrotic notch represents aortic valve closure
and signifies the start of diastole.
Lowest point is the diastolic measurement.
11
Arterial Waveform

12
Arterial Line Blood Draws
Remove cap from proximal stopcock and
attach 5cc syringe.
Open stopcock to patient.
Draw 5cc blood for waste.
Attach appropriate size syringe for labs
ordered and draw blood.
Close stopcock and remove syringe.
Flush system and replace sterile dead end
cap.
13
Care and Maintenance
Assess color, movement, pulse,
temperature, and sensitivity of
extremity where line is in place.
Zero transducer with position changes.
Ensure transducer at phlebostatic axis.

You might also like