User Datagram
Protocol
1
Figure 11.1 Position of UDP in the TCP/IP protocol suite
2
11.1 PROCESS-TO-PROCESS
COMMUNICATION
Before we examine UDP, we must first understand host-to-host
communication and process-to-process communication and the
difference between them.
3
Figure 11.2 UDP versus IP
4
Figure 11.4 IP addresses versus port numbers
5
Note:
The well-known port numbers are less
than 1024.
6
Table 11.1 Well-known ports used with UDP
7
Example 1
In UNIX, the well-known ports are stored in a file called
/etc/services. Each line in this file gives the name of the server
and the well-known port number. We can use the grep utility to
extract the line corresponding to the desired application. The
following shows the port for TFTP. Note TFTP can use port 69
on either UDP or TCP.
$ grep tftp /etc/services
tftp 69/tcp
tftp 69/udp
See Next Slide
8
Example 1 (Continued)
SNMP uses two port numbers (161 and 162), each for a
different purpose
$ grep snmp /etc/services
snmp 161/tcp #Simple Net Mgmt Proto
snmp 161/udp #Simple Net Mgmt Proto
snmptrap 162/udp #Traps for SNMP
9
11.2 USER DATAGRAM
UDP packets are called user datagrams and have a fixed-size header of 8
bytes.
10
Figure 11.7 User datagram format
11
Note:
UDP length =
IP length − IP header’s length
12
Figure 11.8 Pseudoheader for checksum calculation
13
Figure 11.9 Checksum calculation of a simple UDP user datagram
14
Figure 11.10 Encapsulation and decapsulation
15
Figure 11.11 Queues in UDP
16
Figure 11.12 Multiplexing and demultiplexing
17
11.6 UDP PACKAGE
To show how UDP handles the sending and receiving of UDP packets,
we present a simple version of the UDP package. The UDP package
involves five components: a control-block table, input queues, a
control-block module, an input module, and an output module.
18
Figure 11.13 UDP design
19
Table 11.2 The control-block table at the beginning of examples
20
Example 2
The first activity is the arrival of a user datagram with
destination port number 52,012. The input module searches for
this port number and finds it. Queue number 38 has been
assigned to this port, which means that the port has been
previously used. The input module sends the data to queue 38.
The control-block table does not change.
21
Example 3
After a few seconds, a process starts. It asks the operating
system for a port number and is granted port number 52,014.
Now the process sends its ID (4,978) and the port number to
the control-block module to create an entry in the table. The
module takes the first FREE entry and inserts the information
received. The module does not allocate a queue at this moment
because no user datagrams have arrived for this destination
(see Table 11.3).
See Next Slide
22
Table 11.3 Control-block table after Example 3
23
Example 4
A user datagram now arrives for port 52,011. The input
module checks the table and finds that no queue has been
allocated for this destination since this is the first time a user
datagram has arrived for this destination. The module creates
a queue and gives it a number (43). See Table 11.4.
See Next Slide
24
Table 11.4 Control-block after Example 4
25
Example 5
After a few seconds, a user datagram arrives for port 52,222.
The input module checks the table and cannot find an entry for
this destination. The user datagram is dropped and a request is
made to ICMP to send an “unreachable port” message to the
source.
26
