Cumark ES580 Series in the Compressor Application

Shenzhen Cumark New Technologoy Co.Ltd

 内部资料

introduction of air compressor

Air compressor is the basic product of

industrial modernization. And air compressor
is to provide air source power, is the core
equipment of the pneumatic system
mechanical and electrical guide air source
device in the main body, it is the prime power
(usually motor) mechanical energy into gas
pressure energy device, is the compressed air
pressure generating device.

库马克版权所有 02:31:13 AM
 内部资料

Air compressor structure

The following figure is the basic structure
diagram of air compressor

库马克版权所有 02:31:13 AM
 内部资料

Air compressor classification and working principle

There are many kinds of air compressors, which can be divided into positive
displacement compressor and speed compressor according to the working
principle
The working principle of positive displacement compressor: the volume of
compressed gas increases the density of gas molecules in unit volume to
increase the pressure of compressed air;
The working principle of the speed compressor: increase the speed of the
gas molecules, so that the kinetic energy of the gas molecules into the gas
pressure energy, thereby increasing the pressure of compressed air.
Common air compressors: piston air compressors, screw air compressors
(twin screw and single screw), centrifugal air compressors, sliding vane air
compressors, scroll air compressors and so on.

We are here to the commonly used double screw air compressor

frequency conversion application case!

库马克版权所有 02:31:13 AM
 内部资料

Service condition of air compressor

There is a nearly 20 billion air compressor market in China every year, and over 4 million
air compressors are working. Air compressor is generally designed according to the maximum
load of the factory plus 10-20% allowance. In addition, the actual demand of the factory
fluctuates seasonally and temporally, which also leads to large fluctuation of gas
consumption. Therefore, most of the time the air compressor is not fully loaded and has a
large energy saving space. The power consumption of air compressor accounts for about 9%
of all industrial electrical equipment. Variable frequency air compressor has become the future
mainstream development direction.

The figure below is the block diagram of air compressor constant pressure air supply system ：

库马克版权所有 02:31:13 AM
 内部资料

The problem of traditional air compressor

50Hz Power Frequency

Pressure
1 、 The waste of electric Daily Gas
/MPa
energy is serious during Daily Gas Consumption
loading and unloading Consumption

2 、 Power frequency
starting impulse current is
large Aeration Daily work Area Dormant Transition Dormant zone Daily work area
Time

3 、 Pressure instability, lowLoading UnloadingLoading Unloading Unloading

Loading Loading Loading
Unloading Unloading
degree of automation
Long-term low gas consumption

4 、 Heavy maintenance and

noise Working diagram of
traditional air compressor
库马克版权所有 02:31:13 AM
 内部资料

Daily gas Daily gas

consumption consumption Pressure / MPa

Frequency/ Hz
Long-term low gas
consumption

Minimum Working
Frequency

t 时间
Aeration Daily work Area Dormant Transition Dormant zone Wake-up Daily work area

Variable Frequency Variable Frequency Variable Frequency

Loading Area Uloading Area Loading Area

Diagram of variable frequency

air compressor
库马克版权所有 02:31:13 AM
 内部资料

The advantages of variable frequency air compressor

1 、 Large energy saving Ordinary Air Compressor

2 、 Small starting current, no Aeration Aeration

impact on the power grid VFD+ Air Compressor

3 、 Stable output pressure

4 、 Low maintenance and low

noise Aeration Daily Work Zone
Dormant
Transition
Dormant
Zone Daily Work Area

Frequency Conversion Energy

Saving Space Analysis

库马克版权所有 02:31:13 AM
 内部资料

Industry application requirements

STEP1 STEP2 STEP3 STEP4 STEP5

High efficiency Accurate terminal Good anti-

Need low High reliability,
power saving ability, execution function and interference
frequency big timely communication
can adapt to a
need excellent drive ability is required
torque output, response, frequency variety of harsh
control performance, to avoid terminal
converter always environment, the
meet the constant strong overload respond to the system misoperation or
pressure gas supply frequency
capacity. control operation
communication
at the same time, instructions and speed converter requires
smaller running given instructions, signal interruption
a high level of
current; timely communication caused by
feedback related
protection. 。
interference,
operation information,
perfect with the which may cause
system loading and equipment failure
unloading process. and affect the
production
process.

库马克版权所有 02:31:13 AM
 内部资料

industry status

STEP1 STEP2 STEP3 STEP4 STEP5

After frequency Low frequency Poor reliability, Poor anti- The drive
conversion is torque and performance of
difficult to adapt interference
applied to air overload capacity is permanent magnet
not enough, often
to harsh service ability, frequent
compressor, the synchronous motor
control reported environment; equipment
is limited and it
performance is overcurrent or misoperation; can't solve the
limited and the overvoltage fault, problem of
power saving rate equipment failure
starting reversal or
is not enough. rate increase;
demagnetization
well.

库马克版权所有 02:31:13 AM
 内部资料

CUMARK Products Advantage

1 、 Lower operating current under the same load, more significant power saving
effect (better than domestic first-tier brands 2%~10%)

2 、 Smaller and more stable starting current, perfectly realize the soft start of the
system, eliminate the fierce impact of equipment on the power grid and peripheral
equipment, and extend the service life of mechanical parts;

3 、 Large low-frequency torque, strong overload capacity, more effective support

equipment constant pressure gas supply demand;

4 、 15KW and above power standard with built-in dc reactor, effectively reduce the
high harmonic and external conduction radiation, strong anti-interference ability;

5 、 Permanent magnet synchronous motor drive scheme, excellent synchronous

open and closed loop control performance, more efficient and energy-saving.

6 、 High reliability, improve equipment quality;

7 、 Industrial large size Chinese and English LCD keyboard, friendly man-machine
interaction, quick and easy debugging.

库马克版权所有 02:31:13 AM
 内部资料

ES Series Application Cases

The scheme adopts ES580 driver + asynchronous motor control, according

to the process characteristics of air compressor, select PID control mode.
Connection mode of main motor winding of air compressor is adopted;
pressure feedback adopts pressure sensor of 4~20mA; meanwhile, it is
recommended that users convert two redundant ac contactors into
frequency converter emergency stop control and fan cooling fan control
respectively to improve the safety and reliability of air compressor system

库马克版权所有 02:31:13 AM
 内部资料

Use effect
Highly efficient energy saving effect,
A stable operation and low current

Low frequency torque meets,

B
strong overload capacity

Low failure rate and good

C
heat dissipation effect

Large LCD panel for debugging

D and supervisor operation

Built - in dc reactor improves

E
anti - harmonic interference

库马克版权所有 02:31:13 AM
 内部资料

Field application

Shenzhen air compressor

supporting customer application
库马克版权所有 02:31:13 AM
System Wiring

02:31:13 AM
 内部资料

Main Parameter Setting

库马克版权所有 02:31:14 AM
 The End, thank you!

Welcome to contact me freely for details!

[email protected] +86 13417453101 www.linkedin.com/in/cumark-shirley/