CONSTRUCTION
MATERIALS ASSIGNMENT
ASTU
Group members ID
1. Rediet Mered ……….. A/UE16333/10
2. Lidet Dinku………….. A/UE16346/10
3. Meron Tufa………….. A/UE16355/10
4. Hawi Mohammed… ..A/UE16349/10
5. Behailu Eticha……….A/UE16356/10
DEFINITION
Metal refers to a chemical element or a substance with
characteristic metallic properties.
It is either a chemical substance or a chemical element.
Metals frequently resist not only high tensile or
compressive force and corrosion, but also conditions of
shock loading.
CLASSIFICATION OF
METALS
1. Ferrous metal:- which are mainly made of iron with
small amounts of other metals or elements (iron as
main constituent)
Almost all ferrous metals are magnetic
E.g.- Cast iron,
Wrought iron,
Steel
CONT…
2. Non-Ferrous metal:- they don’t contain iron as
main constituent
They are non-magnetic
E.g. - Copper,
Aluminium,
Zinc,
Tin
PRODUCTION OF FERROUS METAL
Raw Iron ore
Material Coke- supplies carbon
Limestone- reduces impurities
Blast Furnace slag removed
Pig iron
Cast iron wrought iron steel
(Commercial forms of iron)
PIG IRON PRODUCTION
Iron ore is reduced to pig iron in a blast
furnace. Iron ore is combined with coke, and
limestone. Hot air are forced through the
material to ignite the coke and melt the iron
ore. The impurities in the iron are absorbed by
the limestone and forms blast furnace slag. The
molten iron (with an excess carbon) collects at
the bottom of the furnace.
PIG IRON CONTENT:
Silicon: 2%
Manganese: 1%
Sulphur: 0.05%
Phosphorous: <2% very brittle; not very useful
directly as a material.
CAST IRON
Made by remelting pig iron & removing impurities in a furnace
(cupola)
Contain
• Iron (92-95%)
• Carbon (2-4%)
• Silicon (1-3%)
• Traces of manganese, phosphorus , sulphur
Shaped by being- iron is poured into a mold while it is liquid,
allowed to solidify inside the mold.
PROPERTIES
• Brittle- due to large carbon amount, difficult to weld.
• Low tensile strength (110 MPa) but high compressive strength.
Types
depends on chemical composition and cooling rate
• Gray cast iron- commonly used
• White cast iron- harder, more resistant
• Malleable cast iron- can be malleable
USES
Manhole covers, engine
blocks, machine tools,
cookware, hardware, fire
hydrants, pipes. (not subjected
to tensile strength)
WROUGHT IRON
Purest form of iron
Made by refining pig iron in a
furnace
Contain
Iron (98%)
Carbon (0.1-0.25%)
Slag (2-3%)
Traces of sulphur, silicon, phosphorus, manganese
PROPERTIES
Malleable, ductile, can be easily welded & machined.
Good resistance to corrosion
Moderate tensile strength (310-380 MPa)
USES
Ornamental work, pipes, vehicle
components, bars, chain
Difference between cast iron and
wrought iron
STEEL
Steel is an alloy of iron and carbon
Invention of steel in 1856 by Henry Bessemer
Bessemer process was the first inexpensive process for the mass-
production of steel from molten pig iron.
Replace by basic oxygen process.
Contains:-
Iron
Carbon (0.12-1.5%)
Phosphorous & Sulphur <0.1%
Manganese up to 0.5%
Silicon up to 0.3%
By varying the carbon content one can impart desired
characteristics to the final product.
Plain Carbon Steels
carbon content from a trace to 2%
Cast iron
carbon content between 2% & 6.67%
Soft or dead mild steel
iron containing a trace of carbon
Iron carbide(Cementite)
6.67% of carbon content
CONVERSION TO STEEL PRODUCTS
STEEL
FORMING
Molten steel are cast directly into the basic shape (slab, bloom, billets) or the
ingot (once hardened) are rolled in rolling mills and transform into slab,
bloom, billet.
A slab (for making plates, sheets, strip and other
flat-rolled steel products)
A bloom (for making beams and columns)
A billet (use to make bars, pipes, wire and wire
products)
MECHANICAL OPERATION
Steel properties are greatly influenced by the
mechanical operation that change ingot, bloom, billets or
slabs into useful shape.
The operations can be done while the steel is in plastic
condition (1090 oC)- hot working or at room temperature
(cold working)
Operations:-
Rolling- The shaping of metal by squeezing it
through a series of rollers.
Extrusion- Forcing a hot billet through a die of
the desired shape.
Drawing- Pulling steel through a small die to
form wire or a small rod. (e.g. round, square)
PROPERTIES OF STEEL
A Steel with a wide variety of characteristics can be produced by:
Altering the carbon content
Adding alloy (metal e.g. nickel, chromium,
tungsten etc.) to steel to improve its characteristics
e.g. corrosion resistance, strength, ductility and
machinability.
Different heat treatment
Mechanical operation (hot or cold rolling,
drawing. Extrusion etc.
HEAT TREATMENT OF
STEEL
The heating and cooling processes are used to change the
structure of a metal and alter its mechanical properties. (e.g.
cooling rapidly in cold water makes it harder and more brittle)
DUCTILITY
Steel has high ductility.
Ductility is the property of a material by which it can withstand
extensive deformation without failure under high tensile stresses.
TENSILE STRENGTH
Most important property. Depends on types of steel. Tensile
strength for structural steel (400-900 MPa)
TYPES OF
STEEL
Mild steel (Low carbon steel)
(<0.25% Carbon); Cheap, strong and easily shaped. Main metal for
construction.
Medium carbon steel
(0.25%-0.5% carbon) Rails, boilers, plates, axles, structures.
High carbon steel
(0.5%-1.5% carbon) stronger than mild steel but more brittle.
Used to make tools and cutters.
CONT…
Steel Alloy
Ni-steel (Gear, shaft, cable), Mn-steel (Rail tracks)
High tensile steel
e.g. as reinforcing material (in the form of wires) in prestressed
concrete.
Galvanized steel
Steel that has been plated with zinc to improve corrosion
resistance.
CLASSIFICATION
OF
STEEL PRODUCTS
Structural steel- plates, bars, pipes, tubes,
structural shapes- I, H beams, channel,
angle
Cont…
Fastening product
used for structural
connections- bolt,
nuts, washers
Cont…
Reinforcing steel-
plain/deformed bar,
wire fabric for
concrete
reinforcement
Cont…
Miscellaneous
products e.g. forms,
pans
ADVANTAGES OF STEEL IN
BUILDING
CONSTRUCTION
1. High strength/ weight ratio
Steel has a high strength/ weight ratio. This property
makes steel a very attractive structural material for high-
rise buildings & long span bridges
Cont…
2. Ductility
Steel can undergo large plastic deformation before failure, thus
providing a large reserve strength. Properly designed steel
structures can have high ductility, which is an important
characteristic for resisting shock loading such as blasts or
earthquakes.
Cont…
3. Speed of erection
Steel structures can be erected quite rapidly therefore reducing
the cost of construction. Structural steel framing can be rapidly
designed, purchased, fabricated and erected without need for
curing and other delays of concrete and masonry construction.
4. Quality of construction
Steel structures can be built with high-quality workmanship.
Cont…
5. Ease of repair, modification & change
Steel structures in general can be repaired quickly and easily.
When building uses change or are improved, structural steel can
be easily modified and reinforced to accommodate the new
requirements.
6. Adaptation of prefabrication
Highly suitable for prefabrication and mass production.
Cont…
7. Repetitive use
Steel can be reused after a structure is disassembled. This
provides salvage value, reduces demolition expenses, reduces
landfill volume and helps the environment
8. Expanding existing structures
Steel buildings can be easily expanded in any direction.
DISADVANTAGES OF STEEL
1. General cost
Steel structures may be more costly than other types of structures .
2. Fireproofing
steel frames in buildings must have adequate
fireproofing.
Cont…
3. Maintenance
Steel structures exposed air and water, such as bridges,
are susceptible to corrosion and should be painted
regularly.
4. Susceptibility to buckling
Due to high strength/ weight ratio, steel compression
members are in general more slender and consequently
more susceptible to buckling than reinforced concrete
compression members.
NON-FERROUS METAL
use as original metal or as alloy
Aluminium
Lightweight- 1/3 weight steel and copper: excellent corrosion
resistance; low strength
Uses
Roofing, window & door frames, door & window handles,
protective covering
Cont…
Copper
High electrical conductivity; readily bent & cut; good corrosion
resistance
Uses
Electrical conductor, heating vessels
Cont…
Zinc
Good conductor of heat; high corrosion resistance
Uses
Roofing material, batteries, protective covering
Cont…
Tin
Resistance to acid corrosion, good conductor of
heat & electricity
Uses
Protective covering, alloy, household purpose, coating
for food containers
ANY QUESTION?
THANK YOU!
