Scribd
Upload
155 views6 pages

G76 Threading Cycle on CNC Lathe

G76 is a multi-pass threading cycle for CNC lathes. It allows for roughing, intermediate, and finishing cuts when cutting threads. The cycle parameters include the number of finishing cycles, pull-out angle, thread angle, depth of cut for each pass, and finishing allowance. The threading chart provides the core diameter, pitch, thread depth, and tap drill size for various metric thread sizes to input the correct X, Z, P, and F values into the G76 cycle. An example problem demonstrates using the G76 cycle to cut external threads on a lathe with multiple passes and tools.

Uploaded by

HARISH VERMA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
155 views6 pages

G76 Threading Cycle on CNC Lathe

G76 is a multi-pass threading cycle for CNC lathes. It allows for roughing, intermediate, and finishing cuts when cutting threads. The cycle parameters include the number of finishing cycles, pull-out angle, thread angle, depth of cut for each pass, and finishing allowance. The threading chart provides the core diameter, pitch, thread depth, and tap drill size for various metric thread sizes to input the correct X, Z, P, and F values into the G76 cycle. An example problem demonstrates using the G76 cycle to cut external threads on a lathe with multiple passes and tools.

Uploaded by

HARISH VERMA
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPT, PDF, TXT or read online on Scribd

THREAD CUTTING ON CNC LATHE

THREAD
ANGLE
THREAD
DEPTH

MAJOR MINOR DIA(CORE DIA)


DIA
/Outer dia.

P
PITCH
MULTI PASS THREADING
CYCLE
G76

INTERMEDIATE
CUT PASS 0.1MM/100micron
FIRST PASS
(ROUGH CUT/HEAVY CUT) FINISHING PASS
GENEERALLY 0.5MM/500Micron (FINE CUT) 0.05MM
G76-MULTI PASS THREADING CYCLE
CYCLE FORMAT
G76 P - - - Q R
G76 X Z P Q F
P 1-NO OF FINISHING CYCLE 03
2 PULL OUT ANGLE 30
3- THREAD ANGLE 60
Q DEPTH OF CUT IN EACH INTERMEDIATE PASS IN MICRONS
R-FINISHING Allowance in mm
This value of finishing allowance is machined according
to number of final finishing Cycles
G76 X Z P Q F
X Core dia from chart mm
Z Length of thread from Drawing
P – Depth of Thread (in microns)
Q Depth of first cut in microns

F – Feed rate ( Equal To Pitch of Thread) from chart


Threading Chart For Metric
Threads
ODIA CORE DIA PITCH THREAD DEPTH TAP”DRILL
10 8.1596 1.50 0.7668 8.5
12 9.8530 1.75 0.9202 10.20
14 11.5462 2.00 1.0735 12.0
16 13.5462 2.00 1.2269 14.0
18 14.9328 2.5 1.2269 15.5
20 16.9328 2.5 1.5336 17.5
22 18.9328 2.5 1.5336 19.5
24 20.3194 3.0 1.5336 21.0
27 23.3194 3.0 1.8403---------------- 24
30 25.7066 3.5 2.1470 --------------26.5
33 28.7060 3.5 2.1470 --------------29.5
36 31.0924 4.0 2.4538 ----------------32.0
PROBLEM ON G76
X20

X16

60 20 40

G21 G97 G99 G76 P03 30 60 Q100 R0.15


G28 U0 W0 G76 X16.93 Z-40 P1533 Q500 F2.5
M06 T1 T1- ExternalGrooving G28 U0 W0
Tool M05
M03 S3000 M30
G00 X22 Z-40
G75 R0.5
G75 X16 Z-47 P1000 Q2000 F02
M05
G28 U0 W0
M06 T2 T2External Threading
M03 S300 Tool
G00 X20 Z2
PROBLEM G76
X36 R20

X16

X12

80 20 10 40

You might also like