Scribd
Upload
74 views9 pages

Shri Ramdeobaba College of Engineering and Management

This document provides information about fly ash bricks produced by a group of 6 industrial engineering students. The 3 sentence summary is: The document outlines the composition, properties, technical specifications, uses, advantages, and quality check process for fly ash bricks made from fly ash, lime, gypsum, and sand by Shubham Tiwari, Lakshya Sarda, Parth Jaiswal, Jatin Jain, Agam A Muley, and Ganesh Thakur from their industrial engineering department. Fly ash bricks are described as lighter and stronger than clay bricks, with specifications provided for size, compressive strength, water absorption, density, and more. Quality is ensured through compressive strength and water absorption

Uploaded by

Shubham Tiwari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
74 views9 pages

Shri Ramdeobaba College of Engineering and Management

This document provides information about fly ash bricks produced by a group of 6 industrial engineering students. The 3 sentence summary is: The document outlines the composition, properties, technical specifications, uses, advantages, and quality check process for fly ash bricks made from fly ash, lime, gypsum, and sand by Shubham Tiwari, Lakshya Sarda, Parth Jaiswal, Jatin Jain, Agam A Muley, and Ganesh Thakur from their industrial engineering department. Fly ash bricks are described as lighter and stronger than clay bricks, with specifications provided for size, compressive strength, water absorption, density, and more. Quality is ensured through compressive strength and water absorption

Uploaded by

Shubham Tiwari
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd

Shri Ramdeobaba College Of Engineering and Management

Computer Integrated Manufacturing (CIM)


VII Sem Industrial Engineering
Group no.: 1

Name Branch Branch Roll no.


Shubham Tiwari IEU 72
Lakshya Sarda IEU 52
Parth Jaiswal IEU 63
Jatin Jain CIV 44
Agam A Muley EN 41
Ganesh Thakur CSE 47
Fly Ash Bricks
• Fly Ash bricks are made of fly ash, lime,
gypsum and sand. The fly ash bricks are
comparatively lighter in weight and stronger
than common clay bricks.
Introduction • Since fly ash is being accumulated as waste
material in large quantity near thermal power
plants its utilisation as main raw material in
the manufacture of bricks will not only create
ample opportunities for its proper.
Raw Materials
TECHNICAL SPECIFICATIONS
•Fly Ash Brick Size Details : [4 Inches ] 230 x 100 x 75 mm
230 x 100 x100 mm
[ 6 Inches ] 230 x 150 x 80 mm
230 x 150 x 100 mm
•Compressive Strength : 75 to 150 kg/cm2
•Water Absorption : 8-12 %
•Density : 1700 Kg/m
•Weight : 230x150x75 mm ( Weight about 2.75 to 3.00 kgs.approx )
•Composition : Cement, Thermal Station Fly Ash ,Crushed Sand/Stone Dust And Chemicals
•Drying Shrinkage : Maximum Average drying test shrinkage 0.035-0.04 %
•Brick Colour : Gray / Dark gray
PROPERTIES

• Thermal Conductivity

• Sound Insulation

• Fire Resistance

• Durability and Moisture Content


Uses/Advantages
• Used at construction sites.
• Higher load bearing capacity.
• Less dampness.
• Sound insulation.
• High durability & Strength.
• Affordable
Quality Check
The fly ash brick lot/sample needs to pass 2 tests-
• Compressive Strength Test (p.1)
• Water Absorption Test (p.2)

p.1

p.2
THANK YOU

You might also like