0% found this document useful (0 votes)
30 views94 pages

1-Rope Block Maintenance

The document consists of a series of assessment questions and answers related to various topics such as painting, rigging, and safety protocols in a maritime context. Each question presents multiple-choice options, with the correct answer indicated for each. The content covers practical knowledge necessary for handling equipment, maintenance, and safety in a marine environment.

Uploaded by

budgerigar692
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
30 views94 pages

1-Rope Block Maintenance

The document consists of a series of assessment questions and answers related to various topics such as painting, rigging, and safety protocols in a maritime context. Each question presents multiple-choice options, with the correct answer indicated for each. The content covers practical knowledge necessary for handling equipment, maintenance, and safety in a marine environment.

Uploaded by

budgerigar692
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PPTX, PDF, TXT or read online on Scribd

ASSESSMENT

1) Used for the purpose of:


A. Tying a rope to a rail
B. Turning about a rail & hanging things (correct answer)
C. Jamming
D. Securing a rope to a spar
ASSESSMENT

2) Brush used for a Hard‐to‐Reach corner


A. Doglegged brush (correct answer)
B. Roller brush
C. Flat brush
D. Round brush
ASSESSMENT

3) The spray gun should be kept clean after use


A. To reduce overspray
B. To prevent the paint from clogging the system (correct answer)
C. To minimize wastage of paint
D. To prevent the spray gun from exploding
ASSESSMENT

4) The advantage of using a purchase is that for a given size of wire rope
A. A smaller weight can be lifted
B. A greater weight can be lifted (correct answer)
C. The frictional forces are reduced
D. The same weight can be lifted
ASSESSMENT

5) Spots of unpainted surface on the hull are called:


A. Holiday (correct answer)
B. Sunday
C. Working Day
D. Week Day
ASSESSMENT

6) A purchase is rove to advantage when


A. The pull is coming from the standing block
B. The wire thickness is reduced
C. The pull is coming from the moving block (correct answer)
D. The purchase is hoisting more weight
ASSESSMENT

7) Identify the brush given in the picture.


A. Flat
B. Stencil
C. Angled
D. Roller (correct answer)
ASSESSMENT

8) Antifouling paint is applied to the underwater hull


A. Immediately after grit blasting the ship bottom
B. After flooding the dry‐dock
C. When the vessel sits on the keel blocks
D. Prior to flooding the dry‐dock (correct answer)
ASSESSMENT

9) Identify the type of Hitch


A. Clove
B. Round Turn
C. Cow
D. Half (correct answer)
ASSESSMENT

10) Used for the purpose of:


A. Securing a rope to a spar
B. Jamming hitch (correct answer)
C. Tying a rope to a rail
D. Tow hoist
ASSESSMENT

11) A strict fire and safety patrol should be kept in the dry dock because:
A. There is no water in the dry dock
B. There are shore staff present on board
C. There is no ship power supply
D. Of repair work being carried out (correct answer)
ASSESSMENT

12) The lifeboat lifeline has the following knot on it at fixed intervals
A. Reef knot
B. Bowline
C. Figure of eight knot (correct answer)
D. Sheep‐shank
ASSESSMENT

13) Hardening of paint surface occurs when


A. Paint is kept in closed drums
B. Paint is mixed with thinner
C. Unused paint is kept in an open pot (correct answer)
D. Paint is mixed with oil
ASSESSMENT

14) Brushes which are frequently in use should be kept with their
bristles immersed in
A. Fresh water (correct answer)
B. Pot of varnish
C. Chemical solution
D. A paint pot
ASSESSMENT

15) If more than 10% wires in 8 diameters is broken the wire should be
A. Renewed (correct answer)
B. Turned end to end
C. Welded
D. Cut and spliced
ASSESSMENT

16) Identify the brush given in the picture.


A. Stencil
B. Flat (correct answer)
C. Roller
D. Angled
ASSESSMENT

17) Identify the type of Hitch


A. Rolled Blackwall
B. Round Turn Blackwall (correct answer)
C. Half Hitch blackwall
D. Blackwall
ASSESSMENT

18) Identify the type of Hitch


A. Rolling
B. Clove
C. Timber (correct answer)
D. Half
ASSESSMENT

19) Identify the Part No.1 in the picture from the below answers
A. Sheave
B. Swallow
C. Crown (correct answer)
D. Cheek
ASSESSMENT

20) Identify the Part No.4 in the picture from the below answers
A. Becket (correct answer)
B. Cheek
C. Pin
D. Sheave
ASSESSMENT

21) Breaking strength of a rope


A. Is more than the safe working load (correct answer)
B. Is the amount it stretches on load
C. Less than safe working load
D. Equal to safe working load
ASSESSMENT

22) Eye splice is used


A. To make a permanent eye at the end of a rope (correct answer)
B. To prevent the strands from unlaying
C. For preventing the rope end from unlaying
D. To join two ropes together
ASSESSMENT

23) A scupper is
A. Rubber squeegee
B. Drain pipe (correct answer)
C. Hand operated pump
D. A flag flown on the foremast
ASSESSMENT

24) To prevent marine growth on the hull:


A. Anti Fouling paint is applied (correct answer)
B. Polyurethane paint is applied
C. Alkyd paint is applied
D. Primer is applied
ASSESSMENT

25) Restricted areas are marked using:


A. Roller brushes
B. Angled brushes
C. Stencil brushes (correct answer)
D. Flat brushes
ASSESSMENT

26) Rope should be stored


A. In a dry well ventilated space (correct answer)
B. Close to chemicals and paints
C. Close to hot bulkheads
D. In a place which is exposed to hot sunlight
ASSESSMENT

27) Epoxy Paint consists of a:


A. Binder and hardener (correct answer)
B. Primer and a Solvent
C. Top Coat and a under coat
D. Chlorine based paint
ASSESSMENT

28) Small patch of unpainted surface left out while painting is called
A. Peeling
B. Cracking
C. Grinning
D. Holiday (correct answer)
ASSESSMENT

29) When a purchase is rigged to disadvantage the pull is from the


A. Running block
B. Lifting block
C. Moving block
D. Standing block (correct answer)
ASSESSMENT

30) Oily stains on deck are removed with


A. Grease
B. De‐Greaser (correct answer)
C. Fresh water
D. Salt water
ASSESSMENT

31) If the sheave is cracked the sheave has to be


A. Welded
B. Greased
C. Renewed (correct answer)
D. Soldered
ASSESSMENT

32) After chipping, rust from a steel surface should be wire brushed,
cleaned and painted with
A. Antifouling
B. Primer (correct answer)
C. Finished coating
D. Varnish
ASSESSMENT

33) When rigging the bosun chair the gantline is secured to the chair
with
A. Round turn and two half hitches
B. Double sheet bend (correct answer)
C. Reef knot
D. Clove hitch
ASSESSMENT

34) A shackle is moused to:


A. Increase the SWL of the shackle
B. Prevent corrosion of the pin
C. Prevent the pin from slipping (correct answer)
D. Strengthen the shackle
ASSESSMENT

35) Type of Hitch


A. Cow (correct answer)
B. Clove
C. Two Half
D. Round Turn
ASSESSMENT

36) Whipping is carried out


A. Protect the ends from chafing damage
B. Join two ropes of equal size
C. To protect the rope from weather
D. Prevent the ends of a rope from unlaying (correct answer)
ASSESSMENT

37) Identify the Part No.5 in the picture from the below answers
A. Cheek
B. Sheave (correct answer)
C. Swallow
D. Crown
ASSESSMENT

38) The split pin on a shackle prevents the pin from


A. Getting stuck
B. Unlocking (correct answer)
C. Getting jammed
D. Getting corroded
ASSESSMENT

39) Identify the Part No. 1 in the picture from the below answers
A. Standing Part
B. Running Part
C. Moving Block
D. Shackle (correct answer)
ASSESSMENT

40) Identify the brush given in the picture.


A. Angled (correct answer)
B. Flat
C. Stencil
D. Roller
ASSESSMENT

41) Identify the Part No. 5 in the picture from the below answers
A. Shackle
B. Running Part
C. Hauling Part (correct answer)
D. Standing Part
ASSESSMENT

42) Epoxy paints cure by reaction between the


A. Binder and the hardener (correct answer)
B. Undercoat and the topcoat
C. Primer and the thinner
D. Undercoat and the primer
ASSESSMENT

43) Wire rope should be condemned if more than


A. 10% of the wires are broken in a length of eight diameters (correct
answer)
B. 8% of the wires are broken in a length of eight diameters
C. 12% of the wires are broken in a length of eight diameters
D. 9% of the wires are broken in a length of eight diameters
ASSESSMENT

44) A single sheave block is used to


A. Eliminate friction
B. Increase the power gained
C. Prevent the wire from being damaged
D. Act as a lead block (correct answer)
ASSESSMENT

45) Grease nipples are provided on blocks for


A. Lubrication (correct answer)
B. Painting
C. Applying anti‐ rust
D. De‐greasing
ASSESSMENT

46) The size of a manila rope is usually indicated by its


A. Diameter (correct answer)
B. Weight
C. Length
D. Circumference
ASSESSMENT

47) The following work is only done in the dry dock:


A. Deck chipping and painting
B. Cleaning cargo hold
C. Cleaning of chain locker and inspection of anchor chain (correct
answer)
D. Changing the crane wire
ASSESSMENT

48) Identify the type of Hitch


A. Rolling
B. Round turn & two half hitches (correct answer)
C. Timber
D. Marline Spike
ASSESSMENT

49) Strongest rope for the same diameter is made of


A. Hemp
B. Nylon (correct answer)
C. Manila
D. Polypropylene
ASSESSMENT

50) To rig a threefold purchase what blocks are required?


A. One 2 ‐sheave and one 3 sheave block
B. Two 2‐ sheave blocks
C. Two 3 ‐sheave blocks (correct answer)
D. One 2‐ sheave bock and a single sheave block
ASSESSMENT

51) Identify the type of Hitch


A. Cow
B. Clove (correct answer)
C. Rolling
D. Timber
ASSESSMENT

52) To make temporary eye at one end the most useful knot is:
A. Reef knot
B. Figure of eight knot
C. Overhand knot
D. Bowline (correct answer)
ASSESSMENT

53) Greasing is carried out on equipment to


A. Make it watertight
B. Increase friction
C. Make it airtight
D. Reduce friction (correct answer)
ASSESSMENT

54) To increase the life of a steel wire rope in a crane it should be


A. Kept slack on the drum
B. Changed end to end
C. Greased regularly (correct answer)
D. Painted
ASSESSMENT

55) Grit blasting of the hull is done in the


A. Dry dock (correct answer)
B. Cargo berth
C. Bulk berth
D. Bunker berth
ASSESSMENT

56) Identify the Part No. 2 in the picture from the below answers
A. Standing Block (correct answer)
B. Shackle
C. Moving Block
D. Hauling Part
ASSESSMENT

57) Primer paint is applied on a steel surface


A. To shield it from Sun’s rays
B. To make it smooth
C. To harden the paint
D. To prevent oxidation (correct answer)
ASSESSMENT

58) The stage can be lowered over side for shipside painting when the
vessel is
A. At anchor in good weather (correct answer)
B. Underway
C. Making way through water in good weather
D. Manoeuvring alongside
ASSESSMENT

59) The knot used at the end of a heaving line is a:


A. Carrick bend
B. Bowline on the bight
C. Crown knot
D. Monkey fist (correct answer)
ASSESSMENT

60) Used for the purpose of:


A. Jamming hitch
B. Securing object into the bight of the line
C. Turning about a rail and hanging things
D. Securing a rope to spar (correct answer)
ASSESSMENT

61) Identify the Part No.2 in the picture from the below answers
A. Pin
B. Sheave
C. Becket
D. Cheek (correct answer)
ASSESSMENT

62) Spray painting is used to


A. Give a thick coating of paint
B. Reach inaccessible areas
C. Cover large areas in short time (correct answer)
D. Minimize loss of paint
ASSESSMENT

63) Inhalation of paint vapour


A. Is harmless to health
B. Is injurious to health (correct answer)
C. Causes lack of appetite
D. Causes dehydration
ASSESSMENT

64) Block which has a hinged side is known as


A. Gin Block
B. Snatch block (correct answer)
C. Chain block
D. Heel block
ASSESSMENT

65) The power gained in a threefold purchase is


A. More than a gun‐tackle
B. More than a twofold purchase when rove to advantage (correct
answer)
C. Same as a twofold purchase
D. Less than a twofold purchase
ASSESSMENT

66) The lay of a right hand lay rope is


A. Midship to right
B. Left to left
C. From right to left
D. Left to right (correct answer)
ASSESSMENT

67) Identify the Part No. 6 in the picture from the below answers
A. Running Part
B. Hauling Part
C. Shackle
D. Moving Block (correct answer)
ASSESSMENT

68) A lead block is used in a derrick when rigging the


A. Preventer wire
B. Purchase to advantage (correct answer)
C. Heel block
D. Stay wire
ASSESSMENT

69) Identify the Part No.6 in the picture from the below answers
A. Sheave
B. Crown
C. Swallow (correct answer)
D. Cheek
ASSESSMENT

70) If the eyes get splashed with paint, you will


A. Rub the eyes for few minutes
B. Clean the eyes with thinner
C. Wipe with a dry cloth
D. Rinse with fresh water immediately for 15 minutes (correct answer)
ASSESSMENT

71) Identify the Part No. 3 in the picture from the below answers
A. Hauling Part
B. Standing Part (correct answer)
C. Running Part
D. Moving Block
ASSESSMENT

72) When a wire rope is joined to a fiber rope it should be


A. Connected with a shackle
B. Spliced to fiber rope
C. Fitted with a thimble (correct answer)
D. Tied with a knot to the fiber rope
ASSESSMENT

73) If the gap between the sheave and the cheek plate is excessive the
wire
A. Will get fouled (correct answer)
B. Needs to be greased
C. Needs to be changed
D. Should be spliced
ASSESSMENT

74) A merchant ship is dry docked at intervals of


A. 20 months
B. 30 months (correct answer)
C. 18 months
D. 10 months
ASSESSMENT

75) Steel surfaces can be chipped using


A. Electrical chipping machines
B. pneumatic chipping
C. Chipping hammers
D. All of the above (correct answer)
ASSESSMENT

76) Spray painting is:


A. Slower than paint brush
B. Faster than roller brush (correct answer)
C. Slower than stencil brush
D. Slower than roller brush
ASSESSMENT

77) When lifting a spar vertically through a manhole the hitch to use is
A. Midshipman hitch
B. Clove hitch
C. Timber hitch (correct answer)
D. Draw hitch
ASSESSMENT

78) The purpose of mousing a hook is to


A. Reduce the swing of the object
B. Prevent the sling from slipping out (correct answer)
C. Increase the SWL of the hook
D. Prevent the hook from getting fouled
ASSESSMENT

79) Identify the Part No.3 in the picture from the below answers
A. Cheek
B. Crown
C. Becket
D. Pin (correct answer)
ASSESSMENT

80) Chipping on the main deck of an oil tanker is hazardous due to


A. Flying rust pieces which may cause injury to personnel
B. Presence of toxic fumes
C. Dust generated due to chipping
D. Fear of sparks igniting flammable vapour (correct answer)
ASSESSMENT

81) Identify the brush given in the picture.


A. Angled
B. Roller
C. Stencil (correct answer)
D. Flat
ASSESSMENT

82) Thinner is stored in the


A. Oil locker
B. SOPEP locker.
C. Mates's locker
D. Paint locker (correct answer)
ASSESSMENT

83) The knot used for making a back splice is a


A. Reef knot
B. Crown knot (correct answer)
C. Figure of eight knot
D. Overhand knot
ASSESSMENT

84) Extra flexible steel wire rope has


A. 6x24 wires per strand
B. 6x12 wires per strand
C. 6x37 wires per strand (correct answer)
D. 6x48 wires per strand
ASSESSMENT

85) The SWL of each block is punched on the


A. Hook
B. Binding straps (correct answer)
C. Swivel
D. Cheek
ASSESSMENT

86) Excessive paint flowing down while painting is called


A. Sagging (correct answer)
B. Peeling
C. Crawling
D. Grinning
ASSESSMENT

87) A gun tackle can be used


A. Both to advantage and disadvantage (correct answer)
B. Only to advantage
C. Never to advantage
D. Only to disadvantage
ASSESSMENT

88) Proof Load of derrick / crane is


A. Less than safe working Load
B. More than safe working load (correct answer)
C. More than breaking strength
D. Same as safe working Load
ASSESSMENT

89) Kinks in the rope


A. Damage the fairleads
B. Damage the warping drum
C. Cause a permanent reduction to the length of the rope
D. Can cause permanent injury to the rope (correct answer)
ASSESSMENT

90) Identify the part No.4 in the picture from the below answers
A. Shackle
B. Running Part (correct answer)
C. Standing Part
D. Moving Block
ASSESSMENT

91) Blocks are greased to


A. Maintain the SWL of the block
B. Keep the check nut tight
C. Prevent Accidents
D. Allow free rotation of sheaves (correct answer)
ASSESSMENT

92) Before working on the stage the seaman should inspect the stage to
ensure that the
A. Rope is of polypropylene
B. Mooring lines are kept tight
C. Wood is intact and free from grease (correct answer)
D. Length of the stage is 2m
ASSESSMENT

93) Bulldog grips are used


A. To strengthen the damaged wire rope
B. To make an eye on a synthetic rope
C. To join two ropes
D. To make an eye on wire rope or join two wire ropes (correct answer)
ASSESSMENT

94) The strands of a left hand laid natural fibre rope run:
A. From left to right
B. From right to left (correct answer)
C. From right centre to left centre
D. From left centre to right centre

You might also like