Project ERROR: Cannot run target compiler ‘aarch64-linux-gnu-g++‘.

最新推荐文章于 2025-05-07 20:35:17 发布

Shaneman666

最新推荐文章于 2025-05-07 20:35:17 发布

阅读量9.8k

点赞数 8

CC 4.0 BY-SA版权

分类专栏：疑难问题文章标签： linux gnu qt

本文链接：https://blog.csdn.net/MCotoneaster/article/details/121255341

疑难问题专栏收录该内容

5 篇文章

订阅专栏

在QT5.12.1 ARM开发环境搭建并移植到RK3399 ubuntu16.04系统运行【完整版】_z54的博客-CSDN博客进行QT交叉编译安装ARM环境时出现了这个问题，主要提示错误如下：

Project ERROR: Cannot run compiler 'g++'. Maybe you forgot to setup the environment?

可以大概猜到是环境添加的问题，可是我已经添加过环境了啊：

#
# qmake configuration for building with aarch64-linux-gnu-g++
#

MAKEFILE_GENERATOR      = UNIX
CONFIG                 += incremental
QMAKE_INCREMENTAL_STYLE = sublib

QT_QPA_DEFAULT_PLATFORM = linuxfb
QMAKE_CFLAGS_RELEASE += -O2 -march=armv8-a -lts
QMAKE_CXXFLAGS_RELEASE += -O2 -march=armv8-a -lts

include(../common/linux.conf)
include(../common/gcc-base-unix.conf)
include(../common/g++-unix.conf)

# modifications to g++.conf
QMAKE_CC                = aarch64-linux-gnu-gcc
QMAKE_CXX               = aarch64-linux-gnu-g++
QMAKE_LINK              = aarch64-linux-gnu-g++
QMAKE_LINK_SHLIB        = aarch64-linux-gnu-g++

# modifications to linux.conf
QMAKE_AR                = aarch64-linux-gnu-ar cqs
QMAKE_OBJCOPY           = aarch64-linux-gnu-objcopy
QMAKE_NM                = aarch64-linux-gnu-nm -P
QMAKE_STRIP             = aarch64-linux-gnu-strip
load(qt_config)

后来打开了一个新终端，输入aa之后按两次Tab按键，输出我有的一些架构，发现我根本没有

aarch64-linux-gnu-gcc
aarch64-linux-gnu-g++

而我的是

aarch64-linux-gnu-gcc-5
aarch64-linux-gnu-g++-6

因此之后修改一下qtbase/mkspecs/linux-aarch64-gnu-g++/qmake.conf这个文件：

#
# qmake configuration for building with aarch64-linux-gnu-g++
#

MAKEFILE_GENERATOR      = UNIX
CONFIG                 += incremental
QMAKE_INCREMENTAL_STYLE = sublib

QT_QPA_DEFAULT_PLATFORM = linuxfb
QMAKE_CFLAGS_RELEASE += -O2 -march=armv8-a -lts
QMAKE_CXXFLAGS_RELEASE += -O2 -march=armv8-a -lts

include(../common/linux.conf)
include(../common/gcc-base-unix.conf)
include(../common/g++-unix.conf)

# modifications to g++.conf
QMAKE_CC                = aarch64-linux-gnu-gcc-5
QMAKE_CXX               = aarch64-linux-gnu-g++-6
QMAKE_LINK              = aarch64-linux-gnu-g++-6
QMAKE_LINK_SHLIB        = aarch64-linux-gnu-g++-6

# modifications to linux.conf
QMAKE_AR                = aarch64-linux-gnu-ar-5 cqs
QMAKE_OBJCOPY           = aarch64-linux-gnu-objcopy
QMAKE_NM                = aarch64-linux-gnu-nm -P
QMAKE_STRIP             = aarch64-linux-gnu-strip
load(qt_config)

之后就qmake成功了。