4.18以上版本内核的操作系统配置bond

最新推荐文章于 2025-06-06 15:01:27 发布

原创最新推荐文章于 2025-06-06 15:01:27 发布 · 409 阅读

0 ·

CC 4.0 BY-SA版权

文章标签：

#linux #服务器 #网络

该脚本用于在Linux系统中配置bonding（网卡绑定），包括active-backup和balance-alb模式，设置IP地址，检查并添加默认网关，以及在启动、停止、重启和状态查询时执行相应操作。此外，还包括了针对不同系统版本（如RockyLinux8.6）的特定处理。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

示例

添加bond

sudo /bin/nmcli con add type bond ifname bond0 mode active-backup miimon 100 

sudo /bin/nmcli con add type bond ifname bond0 mode balance-alb miimon 100 updelay $UPDELAY

配置ip等信息

 sudo  /sbin/ifconfig $DEVICE $IPADDR netmask $NETMASK >
 if [ "$GATEWAY" != "" ];then
			#同一网段已存在默认路由时 不能再进行路由添加 删除bond0
			FLAG=`/sbin/route -n | grep $DEVICE | grep $GATEWAY`
			if [ "$FLAG" == "" ];then
				DEST=`/sbin/route -n | grep $GATEWAY | awk '{ print $1 }'`
				if [ "$DEST" == "0.0.0.0" ];then
					del;
					return 1;
				fi
			fi

			#网络不可达时 删除bond0 
			sudo /sbin/route add default gw $GATEWAY dev $DEVICE > 
			if [ $? -ne 0 ];then 
				del;
				return 1;
			fi
		fi
		sudo /sbin/ifenslave $DEVICE $DEV_LIST 
		stop() {
	#echo -n " [Stop]:" > ${G_TEMP_FILE} 2>&1
	status;
	if [ $? -eq 1 ];then
		echo "Nothing to do, Not bonding." > ${G_TEMP_FILE} 2>&1
		return 1;
	fi
	version=`cat /etc/redhat-release | awk -F"release" '{print $2}' | awk '{print $1}'`
	#1.删除bond0, 卸载模块
	if [[ "$version" == "8.6" ]];then
		#rocky系统
		sudo systemctl start NetworkManager  
		sudo /bin/nmcli connection delete bond-bond0  
		sudo systemctl stop NetworkManager  
	else
		echo -$DEVICE > /sys/class/net/bonding_masters 
	fi
	sudo /sbin/rmmod bonding > ${G_TEMP_FILE} 2>&1
	
	#2.重新配置网卡
	sudo /sbin/service network restart > ${G_TEMP_FILE} 2>&1
	#/sbin/service network restart > ${G_TEMP_FILE} 2>&1
	
	active_dev
	echo "Success" > ${G_TEMP_FILE} 2>&1
}

init() {
	#系统启动初始化时调用
	if [ "$ONBOOT" == "yes" ];then
		start;
	else
		echo "Nothing to do." > ${G_TEMP_FILE} 2>&1
	fi
}


case "$1" in
    init)
		init;
	;;
    start)
        start;
        ;;
    stop)
		stop;
        ;;
    restart)
        stop;
        start;
        ;;
    status)
        status;
        ;;
    *)
        echo "Usage: $0 {init|start|stop|restart|status}"
		exit 1;
	;;
esac

if [ $? -eq 0 ];then
	echo "$1: 成功"
else
	echo "$1: 失败"
fi
if [ $1 != "status" ];then
	restart_routeAndVirtualip >> ${G_LOGS_FILE}
fi
echo -e "`date "+20%y-%m-%d %H:%M:%S"` $1: `cat ${G_TEMP_FILE}`" >> ${G_LOGS_FILE}

exit $?