OLED屏显示文字及图片 & 取模工具的使用

最新推荐文章于 2025-06-17 10:05:59 发布
原创 最新推荐文章于 2025-06-17 10:05:59 发布 · 5k 阅读 · 50 ·
CC 4.0 BY-SA版权
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
文章标签：

#java #linux #开发语言 #嵌入式硬件 #单片机 #c#

本文介绍了51单片机OLED屏显示文字及图片时取模工具的使用。所用模块为51单片机和OLED显示屏GME，并给出参考接线。详细说明了汉字和图片的取模方法，包括在取模工具中的操作步骤，还给出了相应代码区的修改要点及整合后的显示代码。

摘要生成于 C知道 ，由 DeepSeek-R1 满血版支持， 前往体验 >

OLED屏显示文字及图片 & 取模工具的使用

1、所用模块

  • 51单片机
  • OLED显示屏 GME
    在这里插入图片描述
    在这里插入图片描述
  • 参考接线
    • GND接地，VCC接5V，
    • SCL接P0.1
    • SDA接P0.3

2、取模工具

我使用的是字模提取 V2.1 CopyLeft By Horse2000

长这个样子

  • 链接：https://pan.baidu.com/s/14ziQ3Uc-lcJHTKOYkMzDfw?pwd=2222
    提取码：2222

自取
​​​​在这里插入图片描述

3、汉字

3.1汉字取模

在这里插入图片描述

  • 这是打开后我们看到的样子，我们点击 参数设置–其他选项 ，然后安装我的图片的选项选择；
  • 在这里插入图片描述
  • 点击取模方式–点击文本输入区–输入汉字或者英文都行—然后Ctrl和回车键一起按，右上角屏幕就会有我们输入的文字；
    在这里插入图片描述
  • 点击C51格式–右下角就会出现我们要的字模；
    在这里插入图片描述
  • 复制字模；

3.2、汉字取模-代码区

我们主要是在代码里面改怎么一些东西：

  • 将取来的字模换成了数组的形式
  • 在main函数中用for循环，来循环这些数组，ABCD可以往下接，只用两行的话`Oled_Write_Cmd();的组合，有两套就够了；
    在这里插入图片描述
    在这里插入图片描述

下面是取汉字完整的代码

#include "reg52.h"
#include "intrins.h"

sbit scl = P0^1;
sbit sda = P0^3;

void IIC_Start()
{
	scl = 0;
	sda = 1;
	scl = 1;
	_nop_();
	sda = 0;
	_nop_();
}

void IIC_Stop()
{
	scl = 0;
	sda = 0;
	scl = 1;
	_nop_();
	sda = 1;
	_nop_();
}

char IIC_ACK()
{
	char flag;
	sda = 1;//就在时钟脉冲9期间释放数据线
	_nop_();
	scl = 1;
	_nop_();
	flag = sda;
	_nop_();
	scl = 0;
	_nop_();
	
	return flag;
}

void IIC_Send_Byte(char dataSend)
{
	int i;
	
	for(i = 0;i<8;i++){
		scl = 0;//scl拉低，让sda做好数据准备
		sda = dataSend & 0x80;//1000 0000获得dataSend的最高位，给sda
		_nop_();//发送数据建立时间
		scl = 1;//scl拉高开始发送
		_nop_();//数据发送时间
		scl = 0;//发送完毕拉低
		_nop_();//
		dataSend = dataSend << 1;
	}
}

void Oled_Write_Cmd(char dataCmd)
{
	//	1. start()
	IIC_Start();
	//		
	//	2. 写入从机地址  b0111 1000 0x78
	IIC_Send_Byte(0x78);
	//	3. ACK
	IIC_ACK();
	//	4. cotrol byte: (0)(0)000000 写入命令   (0)(1)000000写入数据
	IIC_Send_Byte(0x00);
	//	5. ACK
	IIC_ACK();
	//6. 写入指令/数据
	IIC_Send_Byte(dataCmd);
	//7. ACK
	IIC_ACK();
	//8. STOP
	IIC_Stop();
}

void Oled_Write_Data(char dataData)
{
	//	1. start()
	IIC_Start();
	//		
	//	2. 写入从机地址  b0111 1000 0x78
	IIC_Send_Byte(0x78);
	//	3. ACK
	IIC_ACK();
	//	4. cotrol byte: (0)(0)000000 写入命令   (0)(1)000000写入数据
	IIC_Send_Byte(0x40);
	//	5. ACK
	IIC_ACK();
	///6. 写入指令/数据
	IIC_Send_Byte(dataData);
	//7. ACK
	IIC_ACK();
	//8. STOP
	IIC_Stop();
}


void Oled_Init(void){
	Oled_Write_Cmd(0xAE);//--display off
	Oled_Write_Cmd(0x00);//---set low column address
	Oled_Write_Cmd(0x10);//---set high column address
	Oled_Write_Cmd(0x40);//--set start line address  
	Oled_Write_Cmd(0xB0);//--set page address
	Oled_Write_Cmd(0x81); // contract control
	Oled_Write_Cmd(0xFF);//--128   
	Oled_Write_Cmd(0xA1);//set segment remap 
	Oled_Write_Cmd(0xA6);//--normal / reverse
	Oled_Write_Cmd(0xA8);//--set multiplex ratio(1 to 64)
	Oled_Write_Cmd(0x3F);//--1/32 duty
	Oled_Write_Cmd(0xC8);//Com scan direction
	Oled_Write_Cmd(0xD3);//-set display offset
	Oled_Write_Cmd(0x00);//
	
	Oled_Write_Cmd(0xD5);//set osc division
	Oled_Write_Cmd(0x80);//
	
	Oled_Write_Cmd(0xD8);//set area color mode off
	Oled_Write_Cmd(0x05);//
	
	Oled_Write_Cmd(0xD9);//Set Pre-Charge Period
	Oled_Write_Cmd(0xF1);//
	
	Oled_Write_Cmd(0xDA);//set com pin configuartion
	Oled_Write_Cmd(0x12);//
	
	Oled_Write_Cmd(0xDB);//set Vcomh
	Oled_Write_Cmd(0x30);//
	
	Oled_Write_Cmd(0x8D);//set charge pump enable
	Oled_Write_Cmd(0x14);//
	
	Oled_Write_Cmd(0xAF);//--turn on oled panel		
}

void Oled_Clear()
{
	unsigned char i,j; //-128 --- 127
	
	for(i=0;i<8;i++){
		Oled_Write_Cmd(0xB0 + i);//page0--page7
		//每个page从0列
		Oled_Write_Cmd(0x00);
		Oled_Write_Cmd(0x10);
		//0到127列，依次写入0，每写入数据，列地址自动偏移
		for(j = 0;j<128;j++){
			Oled_Write_Data(0);
		}
	}
}


/*--  文字:  坤  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x20,0x20,0x20,0xFF,0x20,0x20,0x00,0xF8,0x88,0x88,0xFF,0x88,0x88,0xF8,0x00,0x00,
0x10,0x30,0x10,0x0F,0x08,0x08,0x00,0x1F,0x08,0x08,0xFF,0x08,0x08,0x1F,0x00,0x00,

/*--  文字:  坤  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
0x20,0x20,0x20,0xFF,0x20,0x20,0x00,0xF8,0x88,0x88,0xFF,0x88,0x88,0xF8,0x00,0x00,
0x10,0x30,0x10,0x0F,0x08,0x08,0x00,0x1F,0x08,0x08,0xFF,0x08,0x08,0x1F,0x00,0x00,

//我们只要将上面复制下来的字模，换成下面的数组

/*--  文字:  坤  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
code char A1[16] = {0x20,0x20,0x20,0xFF,0x20,0x20,0x00,0xF8,0x88,0x88,0xFF,0x88,0x88,0xF8,0x00,0x00};
code char A2[16] = {0x10,0x30,0x10,0x0F,0x08,0x08,0x00,0x1F,0x08,0x08,0xFF,0x08,0x08,0x1F,0x00,0x00};


/*--  文字:  坤  --*/
/*--  宋体12;  此字体下对应的点阵为：宽x高=16x16   --*/
code char B1[16] = {0x20,0x20,0x20,0xFF,0x20,0x20,0x00,0xF8,0x88,0x88,0xFF,0x88,0x88,0xF8,0x00,0x00};
code char B2[16] = {0x10,0x30,0x10,0x0F,0x08,0x08,0x00,0x1F,0x08,0x08,0xFF,0x08,0x08,0x1F,0x00,0x00};


void main()
{
		unsigned char i;
		//1. OLED初始化
		Oled_Init();
		//2. 选择一个位置
		//2.1 确认页寻址模式
		Oled_Write_Cmd(0x20);
		Oled_Write_Cmd(0x02);
		Oled_Clear();
		//2.2 选择PAGE0   1011 0000
		//								0xB0
		Oled_Write_Cmd(0xB0);
		Oled_Write_Cmd(0x00);
		Oled_Write_Cmd(0x10);
		
        
        for(i = 0;i<16;i++)
        {
            Oled_Write_Data(A1[i]);
        }
        for(i = 0;i<16;i++)
        {
            Oled_Write_Data(B1[i]);
        }
        Oled_Write_Cmd(0xB1);
		Oled_Write_Cmd(0x00);
		Oled_Write_Cmd(0x10);
		
		
        for(i = 0;i<16;i++)
        {
            Oled_Write_Data(A2[i]);
        }
        for(i = 0;i<16;i++)
        {
            Oled_Write_Data(B2[i]);
        }

		while(1);
}

4、图片

4.1、图片取模

  • 打开软件–基本操作–打开图像图标–选择喜欢的图片–点击打开
    在这里插入图片描述
  • 点击取模方式–选择C51格式–自动生成了一些了字模–Ctrl + C；

在这里插入图片描述

4.2、图片代码区

在前面代码的基础上，我们多加一个函数，然后再加一个数组，最后稍微修改main函数就ok；

code unsigned char bmpImager[] = {
/*--  调入了一幅图像：D:\新桌面\ikk.bmp  --*/
/*--  宽度x高度=128x64  --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,
0xC0,0xE0,0xF0,0xF0,0xF8,0xFC,0xFC,0xFE,0xFE,0xFE,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFE,0xFE,0xFC,0xF8,0xFC,0xFC,0xFC,0xFC,0xFC,0xF8,0xF8,0xF0,0xF0,0xE0,0xC0,
0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0xF0,0xF8,0xF8,0xFE,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x1F,0x0F,0x07,0x07,0x07,0x07,0x0F,0x0F,0x0F,
0x0F,0x07,0x07,0x07,0x1F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFE,0xFC,0xFC,0xF8,0xF0,0xE0,0xE0,0xC0,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFC,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0x7F,0xFF,0xFF,0xFF,0x9F,0x05,0x04,0x0C,0x0C,0x18,0x30,0xE0,0xC0,0x70,0x18,0xCC,
0xCC,0x84,0x06,0x06,0x06,0x07,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xB0,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0xFF,0x8F,0x83,0xC3,0xDF,0xB8,
0xE0,0x40,0xC1,0x81,0x80,0x80,0x80,0x80,0xC0,0x60,0x70,0x5F,0x4F,0x78,0x60,0xC1,
0xC1,0x81,0x80,0x80,0x80,0x80,0x80,0xC0,0x43,0x27,0xBF,0x8F,0xDF,0xDF,0xDF,0x9F,
0x1F,0x1F,0x1F,0x3F,0x3F,0xFF,0xFF,0xFF,0xFF,0x7F,0x3F,0x0F,0x03,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x3F,0x7F,0xFF,0x3F,0x3F,
0x3F,0x1E,0x00,0x00,0x06,0x1F,0x33,0x26,0x64,0x4C,0x4C,0x4C,0x4C,0x4C,0x6C,0x24,
0x36,0x17,0x0F,0x05,0x01,0x01,0x00,0x00,0x1E,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,
0x3F,0x0C,0x80,0xE0,0xF8,0xDF,0x8B,0x88,0xC8,0x70,0x30,0x30,0x20,0x60,0xC0,0x80,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x1B,0xFE,
0xFC,0xF8,0xF0,0xF0,0xE0,0xC0,0xC0,0xC0,0xC0,0xE0,0xE0,0xF0,0xF0,0xF0,0xF8,0xF0,
0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0x70,0xF0,0x70,0xF8,0xF8,
0xFC,0xC6,0xC3,0xC1,0x79,0x0C,0x06,0xF1,0xFD,0x07,0x07,0x0F,0x3B,0xE3,0x82,0x07,
0x8E,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x70,0x7C,0x7F,0x7F,
0x7F,0x7F,0x81,0x83,0xFF,0xFF,0xFF,0xEF,0xDF,0xFF,0xFF,0xBF,0xFF,0xDF,0xDF,0xEF,
0xFF,0xF7,0xF7,0xFF,0xFB,0xFB,0xFD,0xFD,0xFE,0xFE,0xBF,0x87,0x81,0xF0,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x7E,0xE0,0x80,0x80,0x8F,0xFE,0x00,0x40,0x60,0x30,0x1F,0x0C,
0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};

void Oled_Show_Image(unsigned char *image)
{
	unsigned char i; 
	unsigned int j;
	
	for(i=0;i<8;i++){
		Oled_Write_Cmd(0xB0 + i);//page0--page7
		//每个page从0列
		Oled_Write_Cmd(0x00);
		Oled_Write_Cmd(0x10);
		//0到127列，依次写入0，每写入数据，列地址自动偏移
		for(j = 128 * i; j<(128 * (i+1));j++){
			Oled_Write_Data(image[j]);
		}
	}
}


void main()
{
		
		//1. OLED初始化
		Oled_Init();
		//2. 选择一个位置
		//2.1 确认页寻址模式
		Oled_Write_Cmd(0x20);
		Oled_Write_Cmd(0x02);
		Oled_Clear();
		Oled_Show_Image(bmpImager);
	
		while(1);
}

4.3、整合一下

  • 显示图片的代码
#include "reg52.h"
#include "intrins.h"

sbit scl = P0^1;
sbit sda = P0^3;

void IIC_Start()
{
	scl = 0;
	sda = 1;
	scl = 1;
	_nop_();
	sda = 0;
	_nop_();
}

void IIC_Stop()
{
	scl = 0;
	sda = 0;
	scl = 1;
	_nop_();
	sda = 1;
	_nop_();
}

char IIC_ACK()
{
	char flag;
	sda = 1;//就在时钟脉冲9期间释放数据线
	_nop_();
	scl = 1;
	_nop_();
	flag = sda;
	_nop_();
	scl = 0;
	_nop_();
	
	return flag;
}

void IIC_Send_Byte(char dataSend)
{
	int i;
	
	for(i = 0;i<8;i++){
		scl = 0;//scl拉低，让sda做好数据准备
		sda = dataSend & 0x80;//1000 0000获得dataSend的最高位，给sda
		_nop_();//发送数据建立时间
		scl = 1;//scl拉高开始发送
		_nop_();//数据发送时间
		scl = 0;//发送完毕拉低
		_nop_();//
		dataSend = dataSend << 1;
	}
}

void Oled_Write_Cmd(char dataCmd)
{
	//	1. start()
	IIC_Start();
	//		
	//	2. 写入从机地址  b0111 1000 0x78
	IIC_Send_Byte(0x78);
	//	3. ACK
	IIC_ACK();
	//	4. cotrol byte: (0)(0)000000 写入命令   (0)(1)000000写入数据
	IIC_Send_Byte(0x00);
	//	5. ACK
	IIC_ACK();
	//6. 写入指令/数据
	IIC_Send_Byte(dataCmd);
	//7. ACK
	IIC_ACK();
	//8. STOP
	IIC_Stop();
}

void Oled_Write_Data(char dataData)
{
	//	1. start()
	IIC_Start();
	//		
	//	2. 写入从机地址  b0111 1000 0x78
	IIC_Send_Byte(0x78);
	//	3. ACK
	IIC_ACK();
	//	4. cotrol byte: (0)(0)000000 写入命令   (0)(1)000000写入数据
	IIC_Send_Byte(0x40);
	//	5. ACK
	IIC_ACK();
	///6. 写入指令/数据
	IIC_Send_Byte(dataData);
	//7. ACK
	IIC_ACK();
	//8. STOP
	IIC_Stop();
}


void Oled_Init(void){
	Oled_Write_Cmd(0xAE);//--display off
	Oled_Write_Cmd(0x00);//---set low column address
	Oled_Write_Cmd(0x10);//---set high column address
	Oled_Write_Cmd(0x40);//--set start line address  
	Oled_Write_Cmd(0xB0);//--set page address
	Oled_Write_Cmd(0x81); // contract control
	Oled_Write_Cmd(0xFF);//--128   
	Oled_Write_Cmd(0xA1);//set segment remap 
	Oled_Write_Cmd(0xA6);//--normal / reverse
	Oled_Write_Cmd(0xA8);//--set multiplex ratio(1 to 64)
	Oled_Write_Cmd(0x3F);//--1/32 duty
	Oled_Write_Cmd(0xC8);//Com scan direction
	Oled_Write_Cmd(0xD3);//-set display offset
	Oled_Write_Cmd(0x00);//
	
	Oled_Write_Cmd(0xD5);//set osc division
	Oled_Write_Cmd(0x80);//
	
	Oled_Write_Cmd(0xD8);//set area color mode off
	Oled_Write_Cmd(0x05);//
	
	Oled_Write_Cmd(0xD9);//Set Pre-Charge Period
	Oled_Write_Cmd(0xF1);//
	
	Oled_Write_Cmd(0xDA);//set com pin configuartion
	Oled_Write_Cmd(0x12);//
	
	Oled_Write_Cmd(0xDB);//set Vcomh
	Oled_Write_Cmd(0x30);//
	
	Oled_Write_Cmd(0x8D);//set charge pump enable
	Oled_Write_Cmd(0x14);//
	
	Oled_Write_Cmd(0xAF);//--turn on oled panel		
}

void Oled_Clear()
{
	unsigned char i,j; //-128 --- 127
	
	for(i=0;i<8;i++){
		Oled_Write_Cmd(0xB0 + i);//page0--page7
		//每个page从0列
		Oled_Write_Cmd(0x00);
		Oled_Write_Cmd(0x10);
		//0到127列，依次写入0，每写入数据，列地址自动偏移
		for(j = 0;j<128;j++){
			Oled_Write_Data(0);
		}
	}
}
code unsigned char bmpImager[] = {
/*--  调入了一幅图像：D:\新桌面\ikk.bmp  --*/
/*--  宽度x高度=128x64  --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,
0xC0,0xE0,0xF0,0xF0,0xF8,0xFC,0xFC,0xFE,0xFE,0xFE,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFE,0xFE,0xFC,0xF8,0xFC,0xFC,0xFC,0xFC,0xFC,0xF8,0xF8,0xF0,0xF0,0xE0,0xC0,
0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0xF0,0xF8,0xF8,0xFE,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,0x1F,0x0F,0x07,0x07,0x07,0x07,0x0F,0x0F,0x0F,
0x0F,0x07,0x07,0x07,0x1F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFE,0xFC,0xFC,0xF8,0xF0,0xE0,0xE0,0xC0,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFC,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0x7F,0xFF,0xFF,0xFF,0x9F,0x05,0x04,0x0C,0x0C,0x18,0x30,0xE0,0xC0,0x70,0x18,0xCC,
0xCC,0x84,0x06,0x06,0x06,0x07,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xB0,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x03,0xFF,0x8F,0x83,0xC3,0xDF,0xB8,
0xE0,0x40,0xC1,0x81,0x80,0x80,0x80,0x80,0xC0,0x60,0x70,0x5F,0x4F,0x78,0x60,0xC1,
0xC1,0x81,0x80,0x80,0x80,0x80,0x80,0xC0,0x43,0x27,0xBF,0x8F,0xDF,0xDF,0xDF,0x9F,
0x1F,0x1F,0x1F,0x3F,0x3F,0xFF,0xFF,0xFF,0xFF,0x7F,0x3F,0x0F,0x03,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x3F,0x7F,0xFF,0x3F,0x3F,
0x3F,0x1E,0x00,0x00,0x06,0x1F,0x33,0x26,0x64,0x4C,0x4C,0x4C,0x4C,0x4C,0x6C,0x24,
0x36,0x17,0x0F,0x05,0x01,0x01,0x00,0x00,0x1E,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0x7F,
0x3F,0x0C,0x80,0xE0,0xF8,0xDF,0x8B,0x88,0xC8,0x70,0x30,0x30,0x20,0x60,0xC0,0x80,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x1B,0xFE,
0xFC,0xF8,0xF0,0xF0,0xE0,0xC0,0xC0,0xC0,0xC0,0xE0,0xE0,0xF0,0xF0,0xF0,0xF8,0xF0,
0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0x70,0xF0,0x70,0xF8,0xF8,
0xFC,0xC6,0xC3,0xC1,0x79,0x0C,0x06,0xF1,0xFD,0x07,0x07,0x0F,0x3B,0xE3,0x82,0x07,
0x8E,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x70,0x7C,0x7F,0x7F,
0x7F,0x7F,0x81,0x83,0xFF,0xFF,0xFF,0xEF,0xDF,0xFF,0xFF,0xBF,0xFF,0xDF,0xDF,0xEF,
0xFF,0xF7,0xF7,0xFF,0xFB,0xFB,0xFD,0xFD,0xFE,0xFE,0xBF,0x87,0x81,0xF0,0xFF,0xFF,
0xFF,0xFF,0xFF,0xFF,0x7E,0xE0,0x80,0x80,0x8F,0xFE,0x00,0x40,0x60,0x30,0x1F,0x0C,
0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};


void Oled_Show_Image(unsigned char *image)
{
	unsigned char i; 
	unsigned int j;
	
	for(i=0;i<8;i++){
		Oled_Write_Cmd(0xB0 + i);//page0--page7
		//每个page从0列
		Oled_Write_Cmd(0x00);
		Oled_Write_Cmd(0x10);
		//0到127列，依次写入0，每写入数据，列地址自动偏移
		for(j = 128 * i; j<(128 * (i+1));j++){
			Oled_Write_Data(image[j]);
		}
	}
}

void main()
{
		
		//1. OLED初始化
		Oled_Init();
		//2. 选择一个位置
		//2.1 确认页寻址模式
		Oled_Write_Cmd(0x20);
		Oled_Write_Cmd(0x02);
		Oled_Clear();
		Oled_Show_Image(bmpImager);
	
		while(1);
}

5、结果图

在这里插入图片描述

欢迎大家一起交流讨论；

用OLED显示图片
weixin_46090955的博客
02-26 445
2、将黑白图片中的每一个像素点的灰度值复制到OLED屏幕上。（所以图片的像素需要=OLED屏幕的像素<128*64。0.96寸OLED模块分辨率是128*64，即像素为长*宽=128*64。1、将彩色图片转化为黑白图片，即每一个像素点只有0或者1两种灰度值。3、图片的所有像素点构成一个数组。（使用PCtoLCD软件生成字模）2、将图片转为黑白图片。（使用ImageLcd软件，输出bmp）1、将图片像素改变为128*64。（使用了WPS自带的工具）4、将数组中的像素点写入OLED屏幕。
OLED显示屏专用取模工具_PCtoLCD2002.zip
06-18
OLED显示屏专用取模工具_PCtoLCD2002，比较好用的图形字符取模软件。
深入解析OLED图片取模技术与实践
最新发布
weixin_35906794的博客
06-17 873
OLED（有机发光二极管）技术以其自发光特性、高对比度、广色域、超薄、低功耗等特点，广泛应用于智能手机、电视、可穿戴设备等。与传统的LCD屏幕相比，OLED屏幕在显示黑色时像素关闭，从而实现真正的黑色和更高的对比度，用户体验更加鲜明生动。图片取模，也称作图像转换，是指将图像数据转换成特定显示设备可以直接识别和显示的像素点阵数据的过程。在OLED屏幕中显示图像之前，必须将图像取模，因为不同的OLED屏幕可能拥有不同的分辨率和色彩深度。这一步骤对于确保图像正确、高效显示是必不可少的。
OLED显示屏开发资料（包括取模软件、使用手册、程序例程、user guide、原理图）
10-18
OLED显示屏开发资料（包括取模软件、使用手册、程序例程、user guide、原理图）
OLED模块取模方式详解（汉字取模、英文取模、图片取模）
m0_73931287的博客
01-09 8248
OLED显示模块取模软件的使用和学习，以及OLED显示模块驱动
OLED取模软件OLED取模软件
02-05
OLED取模软件OLED取模软件OLED取模软件OLED取模软件OLED取模软件OLED取模软件OLED取模软件
LCD / OLED显示汉字，取模软件PCtoLCD2002完美版
热门推荐
菜鸟打怪的博客
06-16 5万+
1. 打开软件，点击菜单栏【选项】，打开字模选项 勾选阴码点阵、逐列式取模、顺向（高位在前，低位在后）、C51格式。 2.在下方栏目中输入欲显示的汉字，此时设置的字宽16，字高16。 点击右下方【生成字模】，即可显示在下方。可选中十六进制数部分，右击【复制】然后粘贴到编程软件里。3.说明 字宽16，字高16，逐列式取模 高度16个位可拆分为16/8=2字节，高度16*宽度16 = 2字节*宽度16 = 32字节控制一个字符显示。参考来源：
OLED屏幕取模工具PCtoLCD2002
09-01
PCtoLCD2002是一款专门针对OLED屏幕设计的取模工具，它主要用于帮助开发者和设计师准确地获取屏幕的像素信息，以创建或优化显示内容。 ### 1. 文字取模 文字取模是PCtoLCD2002的重要功能之一。在设计用户界面时，...
中景园文字取模说明.zip_OLED文字取模_oled取模软件_中景园OLED说明_取模_取模软件
07-15
在电子设计领域，OLED（Organic Light-Emitting Diode，有机发光二极管）显示屏因其高对比度...通过阅读提供的说明和使用取模软件，开发者可以快速掌握OLED文字取模的技术，从而在实际项目中实现清晰、美观的文字显示。
OLED屏幕文字取模软件
02-18
在信息技术领域，OLED屏幕文字取模软件是一种专门用于在有机发光二极管（Organic Light-Emitting Diode, OLED）屏幕上实现文字显示效果的软件工具。OLED是一种显示屏幕技术，它具备自发光特性，无需背光源，能够实现...
0.96OLED取模教程_0.96寸oled_0.96OLED字模esp_0.96oled取模_中文取模oled_取模软件和教程
10-01
0.96寸OLED显示屏是一种常见的微型显示器，广泛应用于各种小型电子设备中，如智能家居、物联网设备、嵌入式系统等。OLED（Organic Light-Emitting Diode）技术因其自发光特性，对比度高、响应速度快、视角广等优点而...
OLED取模教程以及软件
11-16
介绍了如何给你显示一个字符，数字，文字，以及一些黑白图片，里面说的很清楚，个人认为已经很详细了！！！！！！！！
OLED使用例程加取字模软件
04-16
OLED屏幕加C语言程序例程，能够方便开发人员使用OLED屏幕观察实验现象
LCD/ OLED开发字符图像取模工具
01-02
亲测相当好用的LCD/ OLED开发字符图像取模工具!!
OLED显示汉字
02-08
STM32F103显示汉字实验，新手教程代码，
取模软件的使用（取模软件使用教学！）
08-03
取模软件使用教学！
推荐一款OLED取模工具：常用取模工具2024福利版(2.4.1)，好使
sidely的专栏
02-10 3327
常用取模工具2024福利版(2.4.1) 概述： 深蓝取模工具2019春季版(2.1.1)是一款专业的显示器件取模的一款专用软件,主要用于以下器件的取模： LED点阵屏取模； 液晶取模，如常用的LCD12864、LCD12832、LCD24064、LCD320240等； 主要功能： 1、支持所运行的计算机上已安装的字体，没有需要的字体，可以另安装字体到电脑系统中； 2...
OLED文字取模步骤
qq_57484399的博客
08-20 1320
1.打开取模软件, 点击模式, 选择字符模式2.点击选项,自定义格式,选择 C513.删掉行前缀和行后缀的大括号4.点击确定, 在这里输入文字, 就可以显示了5.然后点击生成字模,鼠标选中复制这些6.这样,我们取模的字就成功了7.接着去黏贴到OLED的配置字库函数就可以了。
OLED上显示文字
m0_47239466的博客
07-16 656
OLED芯片手册中的IIC接口章节。
评论 6
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值