MTK feature phone 跑马灯多变效果实现_mtk featurephone编译-CSDN博客

本文详细介绍了如何在MTK平台的特色手机上实现跑马灯的多种变化效果，通过深入探讨相关技术，为开发者提供实现此类功能的指导。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

【转自：http://blog.csdn.net/jiangyu912/article/details/5659250】

1.定义控制每一路灯的标志

#define LED_OFF 0x0000

#define LED_0   0x8000
#define LED_1   0x4000
#define LED_2   0x2000
#define LED_3   0x1000
#define LED_4   0x0800
#define LED_5   0x0400
#define LED_6   0x0200
#define LED_7   0x0100
#define LED_8   0x0080
#define LED_9   0x0040
#define LED_10 0x0020
#define LED_11 0x0010
#define LED_12 0x0008
#define LED_13 0x0004
#define LED_14 0x0002
#define LED_15 0x0001
#define LED_ALL_ON 0xffff
#define LED_1_10 0x4020
#define LED_2_9 0x2040
#define LED_3_8 0x1080
#define LED_4_7 0x0900
#define LED_5_6 0x0600
#define LED_END_FLAG 0xffff

2.定义一个结构体，记录要点亮的灯和这些灯持续的时间（单位为ticks）

typedef struct {
kal_uint16 data;
kal_uint16 ticks;
}neonlight_led_mode_type;

3.添加灯效

1） enum AUD_SYN_LIGHT_MODE 加一个成员，便于代码可读性强，比如加来电灯效

typedef enum{
   AUD_SYN_LIGHT_OFF,
   AUD_SYN_LIGHT_MODE1,
   AUD_SYN_LIGHT_MODE2,
   AUD_SYN_LIGHT_MODE3,
   AUD_SYN_LIGHT_MODE4,
   AUD_SYN_LIGHT_MODE5,
   AUD_SYN_LIGHT_MODE6,
   AUD_SYN_LIGHT_MAX,
   POWER_ON_MODE,
   POWER_OFF_MODE,
   INCOMING_CALL_MODE,
   FLASH_LIGHT_MODE_MAX,
}AUD_SYN_LIGHT_MODE;

2）加灯效数组，如下：

const neonlight_led_mode_type mode_data_incoming[] = {
    {LED_OFF,10},
    {LED_3|LED_4|LED_5,40},
    {LED_0|LED_1|LED_2,40},
    {LED_9|LED_10|LED_0,40},
    {LED_6|LED_7|LED_8,40},
    {LED_3|LED_4|LED_5,40},
    {LED_0|LED_1|LED_2,40},
    {LED_ALL_ON,60},

    {LED_OFF,LED_END_FLAG}
};

3）将新加入的灯效添加到支持灯效的list里
const neonlight_led_mode_type * data_array[FLASH_LIGHT_MODE_MAX] =
{
   NULL ,       /*AUD_SYN_LIGHT_OFF*/
   mode_data1, /*AUD_SYN_LIGHT_MODE1*/
   mode_data2, /*AUD_SYN_LIGHT_MODE2*/
   mode_data3, /*AUD_SYN_LIGHT_MODE3*/
   mode_data4, /*AUD_SYN_LIGHT_MODE4*/
   mode_data5, /*AUD_SYN_LIGHT_MODE5*/
   mode_data6, /*AUD_SYN_LIGHT_MODE6*/
   NULL,        /*AUD_SYN_LIGHT_MAX*/
   mode_data_on,/*POWER_ON_MODE*/
   mode_data_off,/*POWER_OFF_MODE*/
   mode_data_incoming/*INCOMING_CALL_MODE*/
};

4.跑马灯开始，停止，循环持续机制如下：

如来电跑马灯效就可以在mmi_ucm_entry_incoming_call中调用start_neonlight_led(INCOMING_CALL_MODE);

在mmi_ucm_exit_incoming_call中调用stop_neonlight_led

不管是用gpio，或IC控制的led，只要在以下TODO语句下调用对应led驱动函数即可

void neonlight_callback(void *dummy_para)
{
   if( data_array[cur_syn_mode][cur_step].ticks == LED_END_FLAG)
   {
       cur_step = 0;
   }

//此时data_array[cur_syn_mode][cur_step].data里面存储的是要亮哪些led
//TODO:此处调用点亮led的函数

    //此处根据当前led需要持续的时间置timer
   kal_set_timer(led_syn_timer_id,neonlight_callback, NULL,data_array[cur_syn_mode][cur_step].ticks, 0);
   cur_step++;
}

void start_neonlight_led(kal_uint8 cur_mode)
{
    if(0x0 == led_syn_timer_id )
    {
       led_syn_timer_id = kal_create_timer("LED_SYN_TIMER");
    }
    cur_syn_mode = cur_mode;
    if(data_array[cur_syn_mode] != NULL )
    {
       cur_step = 0;
       neonlight_callback(NULL);
    }

}