SCPI(Standard Commands for Programmable Instruments)

SCPI(Standard Commands for Programmable Instruments)定义了一套用于控制可编程测试与测量设备的标准命令集。该标准规定了语法、命令结构及数据格式,但未定义如GPIB、RS232等物理通信链接。SCPI包括电源供应器、负载及各种测量设备如电压表、示波器等仪器的标准命令集。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >

Standard Commands for Programmable Instruments

 

The Standard Commands for Programmable Instruments (SCPI) (often pronounced "skippy") defines a standard set of commands to control programmable test and measurement devices in instrumentation systems.

 

The SCPI Standard specifies the syntax, the command structure, and data formats for programmable instrument control. The physical communications link, such as GPIB (IEEE-488) , RS232, USB, VXIbus etc, is notdefined by SCPI.

 

SCPI also includes standard command sets for several classes of instruments, e.g. power supplies, loads, and measurement devices such as voltmeters and oscilloscopes. A predecessor of SCPI, but with more limited scope, was IEEE 488.2 in 1987.

 

SCPI commands are ASCII textual strings, which are sent to the instrument over the physical layer, such as GPIB. Responses to query commands are typically ASCII strings, too. However, for bulk data, such as acquired signal data, binary formats can be used.

 

Two examples: With the command SYSTem:COMMunicate:SERial:BAUD 2400 the baudrate of an RS232 interface can be set to 2400 bit/s. With the command SYSTem:COMMunicate:SERial:BAUD? the current baudrate of an RS232 interface can be queried. Commands can be abbreviated to their upper case parts, for instance SYST:COMM:SER:BAUD?.

 

Some instrument manufacturers, notably Agilent, Berkeley Nucleonics and Tektronix, have implemented SCPI on many new general purpose instruments. Many smaller companies follow their lead. Typically their SCSI implementations roughly follow the spirit of the standard, but don't implement all finer details of the syntax, and don't follow the standard instrument classes commands in detail.

 

In 2002-2003, the SCPI Consortium voted to become part of the IVI Foundation (Interchangeable Virtual Instruments).

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值