怎么拆分与合并梁(Tekla二次开发)

闭目鸽

于 2022-07-11 22:01:22 发布

阅读量1.9k

点赞数

CC 4.0 BY-SA版权

分类专栏： tekla 文章标签： c# 经验分享

本文链接：https://blog.csdn.net/gezhanling/article/details/125565239

tekla 专栏收录该内容

22 篇文章

订阅专栏

本文通过C#代码展示了如何使用Tekla Structures进行梁的拆分与合并操作。首先创建了两个梁对象，并定义了它们的起点和终点以及截面属性，然后将梁插入模型中。接着，使用Picker类选择梁并进行合并操作。虽然代码中注释了拆分梁的部分，但实际未执行。附带的B站视频链接提供了更详细的视觉教程。

摘要生成于 C知道，由 DeepSeek-R1 满血版支持，前往体验 >

具体代码为:

	 using Tekla.Structures.Model;
	 using Tekla.Structures.Geometry3d;
	 using Tekla.Structures.Model.UI;
	 using Tekla.Structures.Model.Operations;

      Model teklamodel = new Model();

      Point Point1 = new Point(0, 0, 0);
      Point Point2 = new Point(1000, 0, 0);
      Point Point3 = new Point(2000, 0, 0);

      Beam Beam1 = new Beam();
      Beam1.StartPoint = Point1;
      Beam1.EndPoint = Point2;
      Beam1.Profile.ProfileString = "HI550-8-12*350";
      Beam1.Insert();

      Beam Beam2 = new Beam();
      Beam2.StartPoint = Point2;
      Beam2.EndPoint = Point3;
      Beam2.Profile.ProfileString = "HI550-8-12*350";
      Beam2.Insert();
	  //拆分梁部分
      Picker Picker = new Picker()
      Point p = Picker.PickPoint();
      Operation.Combine(Beam1, Beam2);
      teklamodel.CommitChanges();
      //合并梁部分
      //Picker pickerBeam1 = new Picker();
	  //Beam beam1 = 		pickerBeam1.PickObject(Picker.PickObjectEnum.PICK_ONE_OBJECT) as Beam;
	  //Picker pickerBeam2 = new Picker();
	  //Beam beam2 = 	pickerBeam2.PickObject(Picker.PickObjectEnum.PICK_ONE_OBJECT) as Beam;
	  //Operation.Combine(beam1, beam2);