设备树（二）—— u-boot对设备树的支持

农村种地人

于 2018-12-31 11:30:32 发布

阅读量5.7k

点赞数 1

CC 4.0 BY-SA版权

分类专栏：设备树文章标签：设备树

本文链接：https://blog.csdn.net/ggxyx123/article/details/85449406

一、配置u-boot

u-boot对设备树的支持很简单，uboot从v1.1.3开始支持设备树，为了使用设备树，需要在config文件里配置

a、#define CONFIG_OF_LIBFDT

b、配置device tree 分区

重新编译u-boot即可

1、确定u-boot中内核启动命令

U_BOOT_CMD(
	bootz,	CONFIG_SYS_MAXARGS,	1,	do_bootz,
	"boot Linux zImage image from memory",
	"[addr [initrd[:size]] [fdt]]\n"
	"    - boot Linux zImage stored in memory\n"
	"\tThe argument 'initrd' is optional and specifies the address\n"
	"\tof the initrd in memory. The optional argument ':size' allows\n"
	"\tspecifying the size of RAW initrd.\n"
#if defined(CONFIG_OF_LIBFDT)
	"\tWhen booting a Linux kernel which requires a flat device-tree\n"
	"\ta third argument is required which is the address of the\n"
	"\tdevice-tree blob. To boot that kernel without an initrd image,\n"
	"\tuse a '-' for