【3GPP核心网】【4G】LTE中S1-MME流程字段分析（二）

1. 欢迎大家订阅和关注，精讲3GPP通信协议（2G/3G/4G/5G/IMS）知识点，专栏会持续更新中.....敬请期待！ 

承接上文

目录

 4. TAU (23.401 5.3.3)

4.1 Tracking Area Update procedure with Serving GW change

 4.2 Tracking Area Update procedure without Serving GW change

5. Detach

5.1 UE-initiated Detach procedure

5.2 MME-initiated Detach procedure

5.3 HSS-initiated Detach procedure

6. PDN Connectivity

 4. TAU (23.401 5.3.3)

4.1 Tracking Area Update procedure with Serving GW change

关键字段：

 TAU Request
    enb s1apid
    nas pdu
        Protocol discriminator
        Security header type Security header type
        Tracking area update request message identity
        EPS update type EPS update type
        NAS key set identifier NAS key set identifier
        Old GUTI EPS mobile identity
        Addtional GUTI
    TAI
    EUTRAN-CGI
    RRC-Establishment-Cause

authentication request
    enb s1apid
    mme s1apid
    nas pdu
        RAND
        AUTN

authentication response
    enb s1apid
    mme s1apid
    nas pdu
    EUTRAN-CGI
    TAI

security mode command
    enb s1apid
    mme s1apid
    nas pdu
        select NAS security algorithms
        UE security capability
        IMEISV request

secutiry mode complete
    enb s1apid
    mme s1apid
    nas pdu
        mobile identity IMEISV
    EUTRAN-CGI
    TAI

TAU Accept
    enb s1apid
    mme s1apid
    nas pdu
        Protocol discriminator
        Security header type
        Tracking area update accept message identity
        EPS update result
        Spare half octet
        GPRS timer
        GUTI
        TAI list
        EPS bearer context status
        EPS network feature support

TAU Complete
    enb s1apid
    mme s1apid
    nas pdu
    EUTRAN-CGI
    TAI

 4.2 Tracking Area Update procedure without Serving GW change

5. Detach

5.1 UE-initiated Detach procedure

5.2 MME-initiated Detach procedure

5.3 HSS-initiated Detach procedure

关键字段：

Detach Request
    enb s1apid
    mme s1apid
    nas pdu
        emm cause

Detach Accept
    enb s1apid
    mme s1apid
    nas pdu
    EUTRAN-CGI
    TAI

6. PDN Connectivity

关键字段：

PDN Connectivity Request
    APN, 
    PDN Type, 
    Protocol Configuration Options, 
    Request Type

Create session request(MME->SGW:S11)
    IMSI, 
    MSISDN, 
    MME TEID for control plane, 
    RAT type, 
    PDN GW address, 
    PDN Address, 
    Default EPS Bearer QoS, P
    DN Type, 
    subscribed APN-AMBR, 
    APN, 
    EPS Bearer Id, 
    Protocol Configuration Options, 
    Handover Indication, 
    ME Identity, 
    User Location Information (ECGI), 
    UE Time Zone, 
    User CSG Information, 
    MS Info Change Reporting support indication, 
    Selection Mode, 
    Charging Characteristics, 
    Trace Reference, 
    Trace Type, 
    Trigger Id, 
    OMC Identity, 
    Maximum APN Restriction, 
    Dual Address Bearer Flag

Create session request(SGW->PGW:S5)
    IMSI, 
    MSISDN, 
    Serving GW Address for the user plane, 
    Serving GW TEID of the user plane, 
    Serving GW TEID of the control plane, 
    RAT type, Default EPS Bearer QoS, 
    PDN Type, 
    PDN Address, 
    subscribed APN-AMBR, 
    APN, 
    Bearer Id, 
    Protocol Configuration Options, 
    Handover Indication, 
    ME Identity, 
    User Location Information (ECGI), 
    UE Time Zone, 
    User CSG Information, 
    MS Info Change Reporting support indication, 
    PDN Charging Pause Support indication, 
    Selection Mode, 
    Charging Characteristics, 
    Trace Reference, 
    Trace Type, 
    Trigger Id, 
    OMC Identity, 
    Maximum APN Restriction, 
    Dual Address Bearer Flag

Create Session response(PGW->SGW:S5)
    PDN GW Address for the user plane, 
    PDN GW TEID of the user plane, 
    PDN GW TEID of the control plane, 
    PDN Type, PDN Address, 
    EPS Bearer Id, EPS Bearer QoS, 
    Protocol Configuration Options, 
    Charging Id, 
    Prohibit Payload Compression, 
    APN Restriction, 
    Cause, 
    MS Info Change Reporting Action (Start) (if the PDN GW decides to receive UE's location information during the session), 
    CSG Information Reporting Action (Start) (if the PDN GW decides to receive UE's User CSG information during the session), 
    Presence Reporting Area Action (if the PDN GW decides to receive notifications about a change of UE presence in Presence Reporting Area), 
    PDN Charging Pause Enabled indication (if PDN GW has chosen to enable the function), APN-AMBR
    
Create Session response(SGW->MME:S11)
    PDN Type, 
    PDN Address, 
    Serving GW address for User Plane, 
    Serving GW TEID for User Plane, 
    Serving GW TEID for control plane, 
    EPS Bearer Id, EPS Bearer QoS, 
    PDN GW address and TEID (GTP-based S5/S8) or GRE key (PMIP-based S5/S8) at the PDN GW for uplink traffic, 
    Protocol Configuration Options, 
    Prohibit Payload Compression, 
    APN Restriction, Cause, 
    MS Info Change Reporting Action (Start), 
    CSG Information Reporting Action (Start), 
    Presence Reporting Area Action, 
    APN-AMBR

Bearer Setup Request / PDN Connectivity Accept
    EPS Bearer QoS, 
    UE-AMBR, 
    S1-TEID
    PDN Connectivity Accept:
    APN, 
    PDN Type, 
    PDN Address, 
    EPS Bearer Id, 
    Session Management Request, 
    Protocol Configuration Options

Bearer Setup Response
    eNB TEID

PDN Connectivity Complete
    EPS Bearer Identity