Factory reset of Esp32 based on FreeRTOS

1. According the guide set, use command make menuconfig to set configurations like below:

2. After flashing, the partition is showed like below:

3. Long press while boot the system to triger the factory resetting model

Set the partitions file(amazon-freertos\vendors\espressif\esp-idf\components\partition_table\partitions_two_ota.csv) like this

Note:

if there is no partition storage, there will be a erro like below when you start the device:

I (159) PKCS11: Initializing NVS partition: "storage"

ESP_ERROR_CHECK failed: esp_err_t 0x105 (ESP_ERR_NOT_FOUND) at 0x400ee026

0x400ee026: initialize_nvs_partition at C:/msys32/home/terryyao/esp/amazon-freertos-master/amazon-freertos/vendors/espressif/boards/esp32/ports/pkcs11/aws_pkcs11_pal.c:100

(discriminator 1)

file: "C:/msys32/home/terryyao/esp/amazon-freertos-master/amazon-freertos/vendors/espressif/boards/esp32/ports/pkcs11/aws_pkcs11_pal.c" line 100

func: initialize_nvs_partition

expression: ret

4. Testing frist OTA

5. Testing second OTA

6. Testing factory reset after second OTA